Package: linux-image-2.6.17-2-686
Severity: important
As with #383264, linux-image-2.6.17-2-686 OOPses on boot on a dell
poweredge 6400. The machine does use a serial console, but I have not been
able to definitively say that booting without a serial console does not
cause the issue. I've attached the serial console output from a failed
boot.
Thanks
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17.11
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)
<Sep/08 00:14 am> Linux version 2.6.17-2-686 (Debian 2.6.17-7) ([EMAIL
PROTECTED]) (gcc version 4.1.2 20060814 (prerelease) (Debian 4.1.1-11)) #1 SMP
Thu Aug 24 23:24:19 UTC 2006
<Sep/08 00:14 am>
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000007fffe000 (usable)
BIOS-e820: 000000007fffe000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
895MB HIGHMEM available.
1152MB LOWMEM available.
found SMP MP-table at 000fe710
DMI 2.3 present.
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
Processor #3 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 6:10 APIC version 17
<Sep/08 00:14 am>
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<Sep/08 00:14 am>
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro console=tty0 console=ttyS0,9600n8
<Sep/08 00:14 am>
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
<Sep/08 00:14 am>
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 699.507 MHz processor.
<Sep/08 00:14 am>
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
<Sep/08 00:14 am>
Memory: 2071048k/2097144k available (1482k kernel code, 24896k reserved, 544k
data, 196k init, 917496k highmem)
<Sep/08 00:14 am>
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1399.83 BogoMIPS (lpj=2799669)
<Sep/08 00:14 am>
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel Pentium III (Cascades) stepping 01
SMP alternatives: switching to SMP code
<Sep/08 00:14 am>
Booting processor 1/0 eip 3000
<Sep/08 00:14 am>
Initializing CPU#1
Calibrating delay using timer specific routine.. 1398.71 BogoMIPS (lpj=2797422)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Cascades) stepping 01
SMP alternatives: switching to SMP code
Booting processor 2/1 eip 3000
Initializing CPU#2
Calibrating delay using timer specific routine.. 1398.71 BogoMIPS (lpj=2797430)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel Pentium III (Cascades) stepping 01
SMP alternatives: switching to SMP code
Booting processor 3/2 eip 3000
Initializing CPU#3
Calibrating delay using timer specific routine.. 1398.70 BogoMIPS (lpj=2797400)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel Pentium III (Cascades) stepping 01
Total of 4 processors activated (5595.96 BogoMIPS).
ENABLING IO-APIC IRQs
<Sep/08 00:14 am>
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
migration_cost=4000
checking if image is initramfs... it is
Freeing initrd memory: 4232k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc7ee, last bus=14
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
<Sep/08 00:14 am>
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Root Bridge [PCI1] (0000:03)
ACPI: PCI Root Bridge [PCI2] (0000:0e)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14)
<Sep/08 00:14 am>
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 10 11 12 14) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
<Sep/08 00:14 am>
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0b: ioport range 0x814-0x85b could not be reserved
pnp: 00:0b: ioport range 0x8a0-0x8af has been reserved
pnp: 00:0b: ioport range 0xc00-0xcd7 has been reserved
pnp: 00:0b: ioport range 0xf50-0xf58 has been reserved
PCI: Bridge: 0000:04:00.0
IO window: disabled.
MEM window: fac00000-facfffff
PREFETCH window: f0000000-f7ffffff
PCI: Bridge: 0000:03:09.0
<Sep/08 00:14 am>
IO window: c000-cfff
<Sep/08 00:14 am>
MEM window: faa00000-facfffff
PREFETCH window: f0000000-f7ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1157674488.160:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
TCP bic registered
NET: Registered protocol family 1
input: AT Translated Set 2 keyboard as /class/input/input0
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Starting balanced_irq
Using IPI No-Shortcut mode
<Sep/08 00:14 am>
ACPI wakeup devices:
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 196k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
SCSI subsystem initialized
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 26 (level, low) -> IRQ 177
e100: eth0: e100_probe: addr 0xfbefe000, irq 177, MAC addr 00:B0:D0:EA:39:76
qla1280: Skipping AMI SubSys Vendor ID Chip
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 24 (level, low) -> IRQ 185
sym0: <896> rev 0x7 at pci 0000:03:0a.0 irq 185
<Sep/08 00:14 am>
megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
<Sep/08 00:14 am>
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio
hda: CRD-8482B, ATAPI CD/DVD-ROM drive
hda: Disabling (U)DMA for CRD-8482B (blacklisted)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:03:0a.1[B] -> GSI 28 (level, low) -> IRQ 193
sym1: <896> rev 0x7 at pci 0000:03:0a.1 irq 193
<Sep/08 00:14 am>
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.3
megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus 5:slot 0:func 0
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 23 (level, low) -> IRQ 201
megaraid: fw version:[1.74] bios version:[3.27]
scsi2 : LSI Logic MegaRAID driver
scsi[2]: scanning scsi channel 0 [Phy 0] for non-raid devices
Vendor: DELL Model: 1x2 U2W SCSI BP Rev: 1.30
Type: Processor ANSI SCSI revision: 02
scsi[2]: scanning scsi channel 1 [Phy 1] for non-raid devices
Vendor: DELL Model: 1x8 U2W SCSI BP Rev: 5.51
Type: Processor ANSI SCSI revision: 02
scsi[2]: scanning scsi channel 2 [virtual] for logical drives
Vendor: MegaRAID Model: LD 0 RAID1 17G Rev: 1.74
Type: Direct-Access ANSI SCSI revision: 02
Vendor: MegaRAID Model: LD 1 RAID5 489G Rev: 1.74
Type: Direct-Access ANSI SCSI revision: 02
hda: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
SCSI device sda: 35385344 512-byte hdwr sectors (18117 MB)
sda: Write Protect is off
udevd-event[1758sda: asking for cache data failed
]: find_free_numsda: assuming drive cache: write through
ber: %e is depreSCSI device sda: 35385344 512-byte hdwr sectors (18117 MB)
cated, will be rsda: Write Protect is off
emoved and is unsda: asking for cache data failed
likely to work csda: assuming drive cache: write through
orrectly. Don't sda:use it.
sda1 sda2
sd 2:2:0:0: Attached scsi disk sda
SCSI device sdb: 1001771008 512-byte hdwr sectors (512907 MB)
sdb: Write Protect is off
sdb: asking for cache data failed
<Sep/08 00:14 am>
sdb: assuming drive cache: write through
SCSI device sdb: 1001771008 512-byte hdwr sectors (512907 MB)
sdb: Write Protect is off
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb: sdb1
sd 2:2:1:0: Attached scsi disk sdb
Done.
Begin: Mounting root file system... ...
<Sep/08 00:14 am>
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount ...
Done.
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
<Sep/08 00:14 am>
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
<Sep/08 00:14 am>
ReiserFS: sda1: Using r5 hash to sort names
Begin: Running /scripts/local-bottom ...
Done.
<Sep/08 00:14 am>
Done.
Begin: Running /scripts/init-bottom ...
<Sep/08 00:14 am>
Done.
<Sep/08 00:15 am>INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...udevd-event[3486]: find_free_number:
%e is deprecated, will be removed and is unlikely to work correctly. Don't use
it.
<Sep/08 00:15 am>
Floppy drive(s): fd0 is 1.44M
Real Time Clock Driver v1.12ac
FDC 0 is a National Semiconductor PC87306
Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:0e:0d.0[A] -> GSI 20 (level, low) -> IRQ 209
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
e1000: 0000:0e:0d.0: e1000_probe: (PCI:66MHz:64-bit) 00:03:47:9a:5a:e1
input: PC Speaker as /class/input/input1
Linux agpgart interface v0.101 (c) Dave Jones
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
agpgart: ServerWorks CNB20HE is unsupported due to lack of documentation.
agpgart: ServerWorks CNB20HE is unsupported due to lack of documentation.
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
piix4_smbus 0000:00:0f.0: Host SMBus controller not enabled!
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pnp: Device 00:09 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,EPP,ECP]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
2:0:6:0: Attached scsi generic sg0 type 3
2:1:6:0: Attached scsi generic sg1 type 3
sd 2:2:0:0: Attached scsi generic sg2 type 0
sd 2:2:1:0: Attached scsi generic sg3 type 0
BUG: unable to handle kernel NULL pointer dereference at virtual address
0000000c
printing eip:
b020028e
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: sg shpchp parport_pc pci_hotplug i2c_piix4 evdev sworks_agp
agpgart pcspkr 8250_pnp i2c_core parport e1000 rtc floppy reiserfs sd_mod
ide_cd cdrom generic serverworks megaraid_mbox sym53c8xx megaraid_mm qla1280
e100 scsi_transport_spi mii ide_core scsi_mod thermal processor fan
CPU: 1
<Sep/08 00:15 am>
EIP: 0060:[<b020028e>] Not tainted VLI
EFLAGS: 00010206 (2.6.17-2-686 #1)
EIP is at uart_write_room+0x9/0x16
eax: dfa6f800 ebx: 00000006 ecx: dfbada50 edx: 00000000
<Sep/08 00:15 am>
esi: df92e000 edi: b2268800 ebp: 00000006 esp: b22b7f18
ds: 007b es: 007b ss: 0068
Process S03udev (pid: 2148, threadinfo=b22b6000 task=dfbada50)
Stack: b01f4579 b2268800 dfb28aa0 00000282 00000000 dfbada50 b0116f2d df92e138
<Sep/08 00:15 am>
df92e138 00000006 df92e000 00000006 00000006 b01f21df 00000006 080f6408
dfb28aa0 b01f4498 00000000 df92e00c df92e3e8 b01f2b70 dfb28aa0 dfb28aa0
Call Trace:
<b01f4579> write_chan+0xe1/0x293 <b0116f2d> default_wake_function+0x0/0xc
<b01f21df> tty_write+0x147/0x1d8 <b01f4498> write_chan+0x0/0x293
<Sep/08 00:15 am>
<b01f2b70> redirected_tty_write+0x1c/0x6c <b01f2b54>
redirected_tty_write+0x0/0x6c
<b0153395> vfs_write+0xa1/0x140 <b015397f> sys_write+0x3c/0x63
<Sep/08 00:15 am>
<b0102b4f> syscall_call+0x7/0xb
Code: 09 08 8b 40 10 74 09 81 60 10 ff ff ff fd eb 07 81 48 10 00 00 00 02 8b
5e 68 89 f0 ff 53 2c 5b 5e c3 8b 80 80 01 00 00 8b 50 10 <8b> 42 0c 2b 42 08 48
25 ff 0f 00 00 c3 8b 80 80 01 00 00 8b 50
EIP: [<b020028e>] uart_write_room+0x9/0x16 SS:ESP 0068:b22b7f18
