Package: installation-reports INSTALL REPORT
Debian-installer-version: RC2 I think? -rw-r--r-- 1 griffon users 35723264 2004-11-21 17:09 sarge-i386-businesscard.iso uname -a: Linux KeyserSoze 2.6.10-1-686 #1 Tue Jan 18 04:34:19 EST 2005 i686 GNU/Linux (was 2.6.8 before upgrading) Date: March 10, 2005 ~23:00 EST Method: Originally tried a network install, but that wasn't all that happy so I went with the businesscard install using mirrors.kernel.org for network downloads. No proxy. Machine: IBM Thinkpad T42 2378FVU Processor: Pentium M 1.7GHz Memory: 256MB Root Device: IDE, /dev/hda5 Root Size/partition table: Disk /dev/hda: 40.0 GB, 40007761920 bytes 16 heads, 63 sectors/track, 77520 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 29065 14648728+ 7 HPFS/NTFS /dev/hda2 67981 77520 4808160 12 Compaq diagnostics /dev/hda3 29066 67980 19613160 f W95 Ext'd (LBA) /dev/hda5 29066 66849 19043104+ 83 Linux /dev/hda6 66850 67780 469192+ 82 Linux swap / Solaris /dev/hda7 67781 67980 100768+ 83 Linux Partition table entries are not in disk order Filesystem 1K-blocks Used Available Use% Mounted on /dev/hda5 19032832 814540 18218292 5% / tmpfs 128016 0 128016 0% /dev/shm /dev/hda7 97570 13973 78559 16% /boot /dev/hda1 14648724 5751996 8896728 40% /c /dev/hda1 originally was 35GB, the installer's NTFS resize utility was very nice, although it was a little confusing when it told me it needed to write changes even though I hadn't done any fiddling with the partition table yet. Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01) 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 0000:02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01) 0000:02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01) 0000:02:01.0 Ethernet controller: Intel Corp. 82540EP Gigabit Ethernet Controller (Mobile) (rev 03) 0000:02:02.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) 0000:00:00.0 0600: 8086:3340 (rev 03) 0000:00:01.0 0604: 8086:3341 (rev 03) 0000:00:1d.0 0c03: 8086:24c2 (rev 01) 0000:00:1d.1 0c03: 8086:24c4 (rev 01) 0000:00:1d.2 0c03: 8086:24c7 (rev 01) 0000:00:1d.7 0c03: 8086:24cd (rev 01) 0000:00:1e.0 0604: 8086:2448 (rev 81) 0000:00:1f.0 0601: 8086:24cc (rev 01) 0000:00:1f.1 0101: 8086:24ca (rev 01) 0000:00:1f.3 0c05: 8086:24c3 (rev 01) 0000:00:1f.5 0401: 8086:24c5 (rev 01) 0000:00:1f.6 0703: 8086:24c6 (rev 01) 0000:01:00.0 0300: 1002:4e50 0000:02:00.0 0607: 104c:ac46 (rev 01) 0000:02:00.1 0607: 104c:ac46 (rev 01) 0000:02:01.0 0200: 8086:101e (rev 03) 0000:02:02.0 0280: 8086:4220 (rev 05) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [O] Comments/Problems: First time through I tried installing GRUB even though I was using XFS. It hung, but I can't say the installer didn't warn me. Next time through I tried LILO and it misidentified my /dev/hda2 (which is the "hidden" recovery partition table) as "Windows" and generated two "Windows" entries in lilo.conf which broke it - I fixed this by flipping over to the shell. Not really related to the install I don't think, but post-reboot I get a ton of useless modules I can't remove: via82cxxx 13788 0 [permanent] rz1000 2432 0 [permanent] ...etc (I remember having a Pentium 60 with an RZ1000!) Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- ..ooOO [EMAIL PROTECTED] | My opinions are my own OOoo.. ..ooOO [EMAIL PROTECTED] | and certainly not those OOoo.. ..ooOO http://www.chiappa.net/~chris/ | of my employer OOoo.. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
