Package: installation-reports Boot method: Network Install CD Image version: 30 August 2006 Date: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
Machine: IBM Thinkpad 380Z Processor: Pentium II 300 mhz Memory: 163 mb Partitions: [EMAIL PROTECTED]:~$ df -Tl Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/hda1 ext3 5605536 1326168 3994620 25% / varrun tmpfs 79384 84 79300 1% /var/run varlock tmpfs 79384 4 79380 1% /var/lock udev tmpfs 79384 64 79320 1% /dev devshm tmpfs 79384 0 79384 0% /dev/shm lrm tmpfs 79384 18856 60528 24% /lib/modules/2.6.15-23-386/volatile (note was taken when machine was running Xubuntu) Output of lspci and lspci -n: lspci 0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 02) 0000:00:02.0 CardBus bridge: Texas Instruments PCI1250 (rev 02) 0000:00:02.1 CardBus bridge: Texas Instruments PCI1250 (rev 02) 0000:00:03.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph 256AV] (rev 20) 0000:00:06.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:06.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:06.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:06.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) [EMAIL PROTECTED]:~$ lspci -n 0000:00:00.0 0600: 8086:7192 (rev 02) 0000:00:02.0 0607: 104c:ac16 (rev 02) 0000:00:02.1 0607: 104c:ac16 (rev 02) 0000:00:03.0 0300: 10c8:0005 (rev 20) 0000:00:06.0 0680: 8086:7110 (rev 02) 0000:00:06.1 0101: 8086:7111 (rev 01) 0000:00:06.2 0c03: 8086:7112 (rev 01) 0000:00:06.3 0680: 8086:7113 (rev 02) 0000:01:00.0 0200: 10ec:8139 (rev 10) [EMAIL PROTECTED]:~$ Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [E] Config network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Bought a Syba 10/100 PCMCIA network adapter. Cannot get adapter to work in Debian. Tried older testing versions and the 2 March 2006 image of testing did recognise the network adapter, LEDs came on. Still the adapter would not go online. This older image would complain and incorrectly use the 8139cp driver and tell me I should use the 8139too driver instead. Somehow I could not get that to work either, despite trying the modules settings in /etc/modules.conf and /etc/module The install went well until it got to ethernet configuration and it refused to recognise any driver I used. 8139cp or 8139too. Suprised that this card will not work in Debian as I have had PCI NIC that worked flawless. It works in Xubuntu fine, but I prefer Debian anyday! Thank you in advance. John -- John Kerr Anderson [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
