Package: wpasupplicant
Version: 0.5.4-5
Severity: normal
Hi,
For some time now I've been unable to use wpasupplicant with IEEE802.1x. I
tried it with both ipw2100 and ipw2200 boards and it allways complaints about
"Failing to set encryption" and:
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
A small part of the log is the following:
State: SCANNING -> ASSOCIATED
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:0f:24:7a:bf:c0
No keys have been configured - skip key clearing
Associated with 00:0f:24:7a:bf:c0
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
RX EAPOL from 00:0f:24:7a:bf:c0
RX EAPOL - hexdump(len=46): 01 00 00 28 01 01 00 28 01 00 6e 65 74 77 6f 72 6b
69 64 3d 65 2d 55 2c 6e 61 73 69 64 3d 61 70 31 36 30 2c 70 6f 72 74 69 64 3d
30 00 00
Setting authentication timeout: 70 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=35):
00 6e 65 74 77 6f 72 6b 69 64 3d 65 2d 55 2c 6e _networkid=e-U,n
61 73 69 64 3d 61 70 31 36 30 2c 70 6f 72 74 69 asid=ap160,porti
64 3d 30 d=0
EAP: using anonymous identity - hexdump_ascii(len=13):
72 6c 6f 70 65 73 40 69 70 62 2e 70 74 [EMAIL PROTECTED]
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=22): 01 00 00 12 02 01 00 12 01 72 6c 6f 70 65 73 40 69
70 62 2e 70 74
EAPOL: SUPP_BE entering state RECEIVE
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
Scan timeout - try to get results
Received 531 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 0
0: 00:0f:24:7a:c9:90 ssid='e-U' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:0f:24:7a:bf:c0 ssid='e-U' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - blacklisted
2: 00:0f:24:7a:bf:c0 ssid='guest-e-U' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - blacklisted
selected non-WPA AP 00:0f:24:7a:c9:90 ssid='e-U'
Trying to associate with 00:0f:24:7a:c9:90 (SSID='e-U' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_ipw_set_auth_alg: auth_alg=0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_ipw_set_drop_unencrypted: enabled=1
State: ASSOCIATED -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b1a len=12
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Added BSSID 00:0f:24:7a:c9:90 into blacklist
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Failed to set encryption.
I'm launching wpasupplicant as:
# wpa_supplicant -c /tmp/wpa_supplicant.conf -i eth1 -dd -D ipw
Any ideia?
Cheers,
/rp
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Versions of packages wpasupplicant depends on:
ii libc6 2.3.6.ds1-2 GNU C Library: Shared libraries
ii libncurses5 5.5-2 Shared libraries for terminal hand
ii libreadline5 5.1-7 GNU readline and history libraries
ii libssl0.9.8 0.9.8b-2 SSL shared libraries
Versions of packages wpasupplicant recommends:
ii dhcp3-client 3.0.4-7 DHCP Client
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
