Package: installation-reports
Boot method: <How did you boot the installer? CD? floppy? network?>
Image version: <Fill in date and from where you got the image>
Date: <Date and time of the install>
Machine: <HP/Compaq NX7010 (centrino laptop)>
Processor:centrino 1.6Ghz
Memory:521Mo
Partitions: <
[EMAIL PROTECTED]:~$ df -Tl
Sys. de fich. Type 1K-blocs Occupé Disponible Capacité Monté sur
/dev/hda3 ext3 28835220 22596944 4773528 83% /
tmpfs tmpfs 258140 0 258140 0% /dev/shm
/dev/hda1 ext3 28305 17790 9005 67% /boot
/dev/hda2 vfat 14636968 5319184 9317784 37% /dos
/dev/hda6 ext3 13439048 345876 12410508 3% /mnt/hda6
tmpfs tmpfs 10240 732 9508 8% /dev
Output of lspci and lspci -n:
*******************************
[EMAIL PROTECTED]:~$ lspci
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O
Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller
(rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller
(rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA
Storage Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250
Lf [Radeon Mobility 9000 M9] (rev 01)
0000:02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 20)
0000:02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B
Mini PCI Adapter (rev 04)
0000:02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus
Controller (rev 01)
[EMAIL PROTECTED]:~$
*************************************
*************************************
[EMAIL PROTECTED]:~$ lspci -n
0000:00:00.0 0600: 8086:3340 (rev 03)
0000:00:01.0 0604: 8086:3341 (rev 03)
0000:00:1d.0 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 0c03: 8086:24cd (rev 01)
0000:00:1e.0 0604: 8086:2448 (rev 81)
0000:00:1f.0 0601: 8086:24cc (rev 01)
0000:00:1f.1 0101: 8086:24ca (rev 01)
0000:00:1f.3 0c05: 8086:24c3 (rev 01)
0000:00:1f.5 0401: 8086:24c5 (rev 01)
0000:00:1f.6 0703: 8086:24c6 (rev 01)
0000:01:00.0 0300: 1002:4c66 (rev 01)
0000:02:00.0 0c00: 1106:3044 (rev 80)
0000:02:01.0 0200: 10ec:8139 (rev 20)
0000:02:02.0 0280: 8086:1043 (rev 04)
0000:02:04.0 0607: 1524:1410 (rev 01)
[EMAIL PROTECTED]:~$
**************************************
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
1) test in graphical mode: the pointer of the mouse desappeared after
the first click (the messages on the console showed that he synaptic
touchpad was correctly detected)
2) I continue with the keyboard:
the network cards were not correctly detected:
There is one ethernet (eth0) with RTL-8139/8139C/8139C+ and one
wifi
ipw2100 (intel).
The list was incorrect (the installer on etime detected the
ttl8139 as eth1 and in a second run as eth0 (as it had to)
I could never enter the essid and wep key for my wifi card . The
modules didn't seem to exist in the kernel.
3) Entering the real name and passwords
It was impossible to enter the uppercase letters when typing my
real
name. Only lower case letters ? and I don't know if it was the same
with the passwords ... I could not go further as I could
not enter
the network parameters.
I will try with cable-ethernet ater
