Package: installation-reports Boot method: CD Image version: beta3 netinst Date: 20060814
Machine: SGI IP22 (Indigo2) Processor: R4400SC 200 MHz Memory: 256 MB Partitions: No partitioning done. Output of lspci and lspci -n: No PCI onboard. Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: The kernel on the beta3 CD seems to lack keyboard support, so installing using the console is rather hard :) Some strings in the list of languages aren't displayed properly, which means the installation probably can't be done using the affected languages. Note: the installation manual lacks the instructions needed to boot from the CD (boot -f scsi(X)cdrom(Y)partition(8)/r4k-ip22 in the PROM) I'll attempt a serial console install and will submit another report once I'll be done. Thanks, JB. -- Julien BLACHE <[EMAIL PROTECTED]> | Debian, because code matters more Debian & GNU/Linux Developer | <http://www.debian.org> Public key available on <http://www.jblache.org> - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
