Hi > > udev does not load mousedev when an logitech wireless mouse combo > > is attached to the computer. It only creates the following > > devices > > It's supposed to. Try to debug it (enable events logging, etc).
Ok. Here what I did.
shutdown X
rmmod mousedev
udev logging to debug
unplugg/replugg usb device
modprobe mousedev
unplugg/replugg usb device
Here is what I get. Hope that helps. I can't see why its not loading
the driver.
Aug 3 18:40:22 cyborg udevd[2067]: udev_event_run: seq 2307 forked, pid
[5203], 'remove' 'input', 0 seconds old
Aug 3 18:40:22 cyborg udevd[2067]: udev_event_run: seq 2309 forked, pid
[5204], 'remove' 'usb', 0 seconds old
Aug 3 18:40:22 cyborg udevd[2067]: udev_event_run: seq 2310 forked, pid
[5205], 'remove' 'input', 0 seconds old
Aug 3 18:40:22 cyborg udevd[2067]: udev_event_run: seq 2312 forked, pid
[5206], 'remove' 'usb', 0 seconds old
Aug 3 18:40:22 cyborg udevd[2067]: udev_event_run: seq 2313 forked, pid
[5207], 'remove' 'usb_device', 0 seconds old
Aug 3 18:40:22 cyborg kernel: usb 2-1: USB disconnect, address 2
Aug 3 18:40:22 cyborg udevd-event[5203]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd'
Aug 3 18:40:22 cyborg udevd-event[5203]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd
'
Aug 3 18:40:22 cyborg udevd-event[5203]: udev_node_remove: removing device
node '/dev/input/event0'
Aug 3 18:40:22 cyborg udevd-event[5203]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:22 cyborg udevd-event[5203]: udev_event_run: seq 2307 finished
Aug 3 18:40:22 cyborg udevd[2067]: udev_done: seq 2307, pid [5203] exit with
0, 0 seconds old
Aug 3 18:40:22 cyborg udevd[2067]: udev_event_run: seq 2308 forked, pid
[5208], 'remove' 'input', 0 seconds old
Aug 3 18:40:22 cyborg udevd-event[5204]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:22 cyborg udevd-event[5204]: udev_event_run: seq 2309 finished
Aug 3 18:40:22 cyborg udevd[2067]: udev_done: seq 2309, pid [5204] exit with
0, 0 seconds old
Aug 3 18:40:22 cyborg udevd-event[5205]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse'
Aug 3 18:40:22 cyborg udevd-event[5205]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mou
se'
Aug 3 18:40:22 cyborg udevd-event[5205]: udev_node_remove: removing device
node '/dev/input/event1'
Aug 3 18:40:22 cyborg udevd-event[5205]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:22 cyborg udevd-event[5205]: udev_event_run: seq 2310 finished
Aug 3 18:40:22 cyborg udevd[2067]: udev_done: seq 2310, pid [5205] exit with
0, 0 seconds old
Aug 3 18:40:22 cyborg udevd[2067]: udev_event_run: seq 2311 forked, pid
[5209], 'remove' 'input', 0 seconds old
Aug 3 18:40:22 cyborg udevd-event[5206]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:22 cyborg udevd-event[5206]: udev_event_run: seq 2312 finished
Aug 3 18:40:22 cyborg udevd[2067]: udev_done: seq 2312, pid [5206] exit with
0, 0 seconds old
Aug 3 18:40:22 cyborg udevd[2067]: udev_event_run: seq 2314 forked, pid
[5210], 'remove' 'usb', 0 seconds old
Aug 3 18:40:22 cyborg udevd-event[5207]: udev_node_remove: removing device
node '/dev/bus/usb/002/002'
Aug 3 18:40:22 cyborg udevd-event[5207]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:22 cyborg udevd-event[5207]: udev_event_run: seq 2313 finished
Aug 3 18:40:22 cyborg udevd[2067]: udev_done: seq 2313, pid [5207] exit with
0, 0 seconds old
Aug 3 18:40:22 cyborg udevd-event[5208]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:22 cyborg udevd-event[5208]: udev_event_run: seq 2308 finished
Aug 3 18:40:22 cyborg udevd[2067]: udev_done: seq 2308, pid [5208] exit with
0, 0 seconds old
Aug 3 18:40:22 cyborg udevd-event[5209]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:22 cyborg udevd-event[5209]: udev_event_run: seq 2311 finished
Aug 3 18:40:22 cyborg udevd[2067]: udev_done: seq 2311, pid [5209] exit with
0, 0 seconds old
Aug 3 18:40:22 cyborg udevd-event[5210]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:22 cyborg udevd-event[5210]: udev_event_run: seq 2314 finished
Aug 3 18:40:22 cyborg udevd[2067]: udev_done: seq 2314, pid [5210] exit with
0, 0 seconds old
Aug 3 18:40:25 cyborg kernel: usb 2-1: new low speed USB device using uhci_hcd
and address 3
Aug 3 18:40:26 cyborg udevd[2067]: udev_event_run: seq 2315 forked, pid
[5211], 'add' 'usb', 0 seconds old
Aug 3 18:40:26 cyborg udevd-event[5211]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/bus' appeared after 0 loops
Aug 3 18:40:26 cyborg udevd-event[5211]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:26 cyborg udevd-event[5211]: udev_event_run: seq 2315 finished
Aug 3 18:40:26 cyborg udevd[2067]: udev_done: seq 2315, pid [5211] exit with
0, 0 seconds old
Aug 3 18:40:26 cyborg kernel: usb 2-1: configuration #1 chosen from 1 choice
Aug 3 18:40:26 cyborg udevd[2067]: udev_event_run: seq 2316 forked, pid
[5212], 'add' 'usb', 0 seconds old
Aug 3 18:40:26 cyborg udevd-event[5212]: wait_for_sysfs: wait for
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bus' for 20 mseconds
Aug 3 18:40:26 cyborg udevd[2067]: udev_event_run: seq 2319 forked, pid
[5213], 'add' 'usb', 0 seconds old
Aug 3 18:40:26 cyborg kernel: input: Logitech USB Receiver as
/class/input/input3
Aug 3 18:40:26 cyborg kernel: input: USB HID v1.10 Keyboard [Logitech USB
Receiver] on usb-0000:00:1d.0-1
Aug 3 18:40:26 cyborg udevd-event[5213]: wait_for_sysfs: wait for
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/bus' for 20 mseconds
Aug 3 18:40:26 cyborg udevd-event[5212]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bus' appeared after 1
loop
s
Aug 3 18:40:26 cyborg udevd-event[5212]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:26 cyborg udevd-event[5212]: run_program: '/sbin/modprobe
usb:v046DpC505d1721dc00dsc00dp00ic03isc01ip01'
Aug 3 18:40:26 cyborg udevd-event[5212]: run_program: '/sbin/modprobe'
(stderr) 'WARNING: Not loading blacklisted module usbkbd'
Aug 3 18:40:26 cyborg udevd-event[5213]: wait_for_sysfs: wait for
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/bus' for 20 mseconds
Aug 3 18:40:26 cyborg kernel: input: Logitech USB Receiver as
/class/input/input4
Aug 3 18:40:26 cyborg kernel: input: USB HID v1.10 Mouse [Logitech USB
Receiver] on usb-0000:00:1d.0-1
Aug 3 18:40:26 cyborg udevd-event[5213]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/bus' appeared after 2
loop
s
Aug 3 18:40:26 cyborg udevd-event[5213]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:26 cyborg udevd-event[5213]: run_program: '/sbin/modprobe
usb:v046DpC505d1721dc00dsc00dp00ic03isc01ip02'
Aug 3 18:40:26 cyborg udevd-event[5213]: run_program: '/sbin/modprobe'
(stderr) 'WARNING: Not loading blacklisted module usbmouse'
Aug 3 18:40:26 cyborg udevd-event[5212]: run_program: '/sbin/modprobe'
returned with status 0
Aug 3 18:40:26 cyborg udevd-event[5212]: udev_event_run: seq 2316 finished
Aug 3 18:40:26 cyborg udevd[2067]: udev_done: seq 2316, pid [5212] exit with
0, 0 seconds old
Aug 3 18:40:26 cyborg udevd[2067]: udev_event_run: seq 2317 forked, pid
[5216], 'add' 'input', 0 seconds old
Aug 3 18:40:26 cyborg udevd-event[5213]: run_program: '/sbin/modprobe'
returned with status 0
Aug 3 18:40:26 cyborg udevd-event[5213]: udev_event_run: seq 2319 finished
Aug 3 18:40:26 cyborg udevd[2067]: udev_done: seq 2319, pid [5213] exit with
0, 0 seconds old
Aug 3 18:40:26 cyborg udevd[2067]: udev_event_run: seq 2320 forked, pid
[5217], 'add' 'input', 0 seconds old
Aug 3 18:40:26 cyborg udevd[2067]: udev_event_run: seq 2322 forked, pid
[5218], 'add' 'usb_device', 0 seconds old
Aug 3 18:40:26 cyborg udevd-event[5216]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:26 cyborg udevd-event[5216]: run_program: '/sbin/modprobe
input:b0003v046DpC505e1721-e0,1,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7
E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,raml0,1,2,3,4,sfw'
Aug 3 18:40:26 cyborg udevd-event[5216]: run_program: '/sbin/modprobe'
(stderr) 'WARNING: Not loading blacklisted module evbug'
Aug 3 18:40:26 cyborg udevd-event[5216]: run_program: '/sbin/modprobe'
returned with status 0
Aug 3 18:40:26 cyborg udevd-event[5216]: udev_event_run: seq 2317 finished
Aug 3 18:40:26 cyborg udevd[2067]: udev_done: seq 2317, pid [5216] exit with
0, 0 seconds old
Aug 3 18:40:26 cyborg udevd[2067]: udev_event_run: seq 2318 forked, pid
[5220], 'add' 'input', 0 seconds old
Aug 3 18:40:26 cyborg udevd-event[5217]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:26 cyborg udevd-event[5217]: run_program: '/sbin/modprobe
input:b0003v046DpC505e1721-e0,1,2,k71,72,73,74,88,8C,8E,8F,9B,9C,9E,9F,A3
,A4,A5,A6,AB,AC,100,101,102,103,104,105,106,107,108,109,10A,10B,10C,10D,10E,10F,110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,
120,121,122,123,124,125'
Aug 3 18:40:26 cyborg udevd-event[5218]: run_program: '/bin/sh -c
'K=usbdev2.3; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''
Aug 3 18:40:26 cyborg udevd-event[5218]: run_program: '/bin/sh' (stdout)
'bus/usb/002/003'
Aug 3 18:40:26 cyborg udevd-event[5218]: run_program: '/bin/sh' returned with
status 0
Aug 3 18:40:26 cyborg udevd-event[5218]: udev_rules_get_name: rule applied,
'usbdev2.3' becomes 'bus/usb/002/003'
Aug 3 18:40:26 cyborg udevd-event[5218]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@usbdev2.3: No such file or direc
tory
Aug 3 18:40:26 cyborg udevd-event[5218]: udev_node_add: creating device node
'/dev/bus/usb/002/003', major = '189', minor = '130', mode = '0664
', uid = '0', gid = '0'
Aug 3 18:40:26 cyborg udevd-event[5218]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:26 cyborg udevd-event[5218]: udev_event_run: seq 2322 finished
Aug 3 18:40:26 cyborg udevd[2067]: udev_done: seq 2322, pid [5218] exit with
0, 0 seconds old
Aug 3 18:40:26 cyborg udevd-event[5220]: udev_rules_get_name: rule applied,
'event0' becomes 'input/event0'
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: 'usb_id -x'
Aug 3 18:40:26 cyborg usb_id[5223]: usb_id:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0: if_class 3 protocol 0
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_VENDOR=Logitech'
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_MODEL=USB_Receiver'
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_REVISION=1721'
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_SERIAL=Logitech_USB_Receiver'
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_TYPE=hid'
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_BUS=usb'
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: '/lib/udev/usb_id'
returned with status 0
Aug 3 18:40:26 cyborg udevd-event[5220]: udev_rules_get_name: add symlink
'input/by-id/usb-Logitech_USB_Receiver-event-kbd'
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: 'path_id
/class/input/input3/event0'
Aug 3 18:40:26 cyborg udevd-event[5217]: run_program: '/sbin/modprobe'
(stderr) 'FATAL: Module input:b0003v046DpC505e1721_e0,1,2,k71,72,73,74,8
8,8C,8E,8F,9B,9C,9E,9F,A3,A4,A5,A6,AB,AC,100,101,102,103,104,105,106,107,108,109,10A,10B,10C,10D,10E,10F,110,111,112,113,114,115,116,117,118,119
,11A,11B,11C,11D,11E,11F,120,121,122,123,124,125 not found.'
Aug 3 18:40:26 cyborg udevd-event[5217]: run_program: '/sbin/modprobe'
returned with status 1
Aug 3 18:40:26 cyborg udevd-event[5217]: udev_event_run: seq 2320 finished
Aug 3 18:40:26 cyborg udevd[2067]: udev_done: seq 2320, pid [5217] exit with
1, 0 seconds old
Aug 3 18:40:26 cyborg udevd[2067]: udev_event_run: seq 2321 forked, pid
[5227], 'add' 'input', 0 seconds old
Aug 3 18:40:26 cyborg udevd-event[5227]: udev_rules_get_name: rule applied,
'event1' becomes 'input/event1'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: 'usb_id -x'
Aug 3 18:40:26 cyborg usb_id[5228]: usb_id:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1: if_class 3 protocol 0
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_VENDOR=Logitech'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_MODEL=USB_Receiver'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_REVISION=1721'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_SERIAL=Logitech_USB_Receiver'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_TYPE=hid'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_BUS=usb'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: '/lib/udev/usb_id'
returned with status 0
Aug 3 18:40:26 cyborg udevd-event[5227]: udev_rules_get_name: add symlink
'input/by-id/usb-Logitech_USB_Receiver-event-mouse'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: 'path_id
/class/input/input4/event1'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: '/lib/udev/path_id'
(stdout) 'ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1'
Aug 3 18:40:26 cyborg udevd-event[5227]: run_program: '/lib/udev/path_id'
returned with status 0
Aug 3 18:40:26 cyborg udevd-event[5227]: udev_rules_get_name: add symlink
'input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse'
Aug 3 18:40:26 cyborg udevd-event[5227]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@[EMAIL PROTECTED]: No such file or direct
ory
Aug 3 18:40:26 cyborg udevd-event[5227]: udev_node_add: creating device node
'/dev/input/event1', major = '13', minor = '65', mode = '0660', ui
d = '0', gid = '0'
Aug 3 18:40:26 cyborg udevd-event[5227]: udev_node_add: creating symlink
'/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse' to '../event1
'
Aug 3 18:40:26 cyborg udevd-event[5227]: udev_node_add: creating symlink
'/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse' to '../e
vent1'
Aug 3 18:40:26 cyborg udevd-event[5227]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:26 cyborg udevd-event[5227]: udev_event_run: seq 2321 finished
Aug 3 18:40:26 cyborg udevd[2067]: udev_done: seq 2321, pid [5227] exit with
0, 0 seconds old
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: '/lib/udev/path_id'
(stdout) 'ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0'
Aug 3 18:40:26 cyborg udevd-event[5220]: run_program: '/lib/udev/path_id'
returned with status 0
Aug 3 18:40:26 cyborg udevd-event[5220]: udev_rules_get_name: add symlink
'input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd'
Aug 3 18:40:26 cyborg udevd-event[5220]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@[EMAIL PROTECTED]: No such file or direct
ory
Aug 3 18:40:26 cyborg udevd-event[5220]: udev_node_add: creating device node
'/dev/input/event0', major = '13', minor = '64', mode = '0660', ui
d = '0', gid = '0'
Aug 3 18:40:26 cyborg udevd-event[5220]: udev_node_add: creating symlink
'/dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd' to '../event0'
Aug 3 18:40:26 cyborg udevd-event[5220]: udev_node_add: creating symlink
'/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd' to '../eve
nt0'
Aug 3 18:40:26 cyborg udevd-event[5220]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:40:26 cyborg udevd-event[5220]: udev_event_run: seq 2318 finished
Aug 3 18:40:26 cyborg udevd[2067]: udev_done: seq 2318, pid [5220] exit with
0, 0 seconds old
--------------------------
----load mousedev--------
Aug 3 18:43:42 cyborg udevd[2067]: udev_event_run: seq 2323 forked, pid
[5237], 'add' 'module', 0 seconds old
Aug 3 18:43:42 cyborg udevd[2067]: udev_event_run: seq 2324 forked, pid
[5238], 'add' 'input', 0 seconds old
Aug 3 18:43:42 cyborg udevd[2067]: udev_event_run: seq 2325 forked, pid
[5239], 'add' 'input', 0 seconds old
Aug 3 18:43:42 cyborg udevd[2067]: udev_event_run: seq 2326 forked, pid
[5240], 'add' 'misc', 0 seconds old
Aug 3 18:43:42 cyborg kernel: mice: PS/2 mouse device common for all mice
Aug 3 18:43:42 cyborg udevd-event[5237]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:43:42 cyborg udevd-event[5237]: udev_event_run: seq 2323 finished
Aug 3 18:43:42 cyborg udevd[2067]: udev_done: seq 2323, pid [5237] exit with
0, 0 seconds old
Aug 3 18:43:42 cyborg udevd-event[5238]: udev_rules_get_name: rule applied,
'mouse0' becomes 'input/mouse0'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: 'usb_id -x'
Aug 3 18:43:42 cyborg usb_id[5241]: usb_id:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1: if_class 3 protocol 0
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_VENDOR=Logitech'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_MODEL=USB_Receiver'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_REVISION=1721'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_SERIAL=Logitech_USB_Receiver'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_TYPE=hid'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_BUS=usb'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: '/lib/udev/usb_id'
returned with status 0
Aug 3 18:43:42 cyborg udevd-event[5238]: udev_rules_get_name: add symlink
'input/by-id/usb-Logitech_USB_Receiver-mouse'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: 'path_id
/class/input/input4/mouse0'
Aug 3 18:43:42 cyborg udevd-event[5239]: udev_rules_get_name: rule applied,
'mice' becomes 'input/mice'
Aug 3 18:43:42 cyborg udevd-event[5239]: run_program: 'path_id
/class/input/mice'
Aug 3 18:43:42 cyborg udevd-event[5240]: udev_rules_get_name: no node name
set, will use kernel name 'psaux'
Aug 3 18:43:42 cyborg udevd-event[5240]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@psaux: No such file or directory
Aug 3 18:43:42 cyborg udevd-event[5240]: udev_node_add: creating device node
'/dev/psaux', major = '10', minor = '1', mode = '0660', uid = '0',
gid = '0'
Aug 3 18:43:42 cyborg udevd-event[5240]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:43:42 cyborg udevd-event[5240]: udev_event_run: seq 2326 finished
Aug 3 18:43:42 cyborg udevd[2067]: udev_done: seq 2326, pid [5240] exit with
0, 0 seconds old
Aug 3 18:43:42 cyborg udevd-event[5239]: run_program: '/lib/udev/path_id'
(stdout) 'ID_PATH='
Aug 3 18:43:42 cyborg udevd-event[5239]: run_program: '/lib/udev/path_id'
returned with status 1
Aug 3 18:43:42 cyborg udevd-event[5239]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@mice: No such file or directory
Aug 3 18:43:42 cyborg udevd-event[5239]: udev_node_add: creating device node
'/dev/input/mice', major = '13', minor = '63', mode = '0660', uid
= '0', gid = '0'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: '/lib/udev/path_id'
(stdout) 'ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1'
Aug 3 18:43:42 cyborg udevd-event[5238]: run_program: '/lib/udev/path_id'
returned with status 0
Aug 3 18:43:42 cyborg udevd-event[5238]: udev_rules_get_name: add symlink
'input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse'
Aug 3 18:43:42 cyborg udevd-event[5238]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@[EMAIL PROTECTED]: No such file or direct
ory
Aug 3 18:43:42 cyborg udevd-event[5238]: udev_node_add: creating device node
'/dev/input/mouse0', major = '13', minor = '32', mode = '0660', ui
d = '0', gid = '0'
Aug 3 18:43:42 cyborg udevd-event[5238]: udev_node_add: creating symlink
'/dev/input/by-id/usb-Logitech_USB_Receiver-mouse' to '../mouse0'
Aug 3 18:43:42 cyborg udevd-event[5238]: udev_node_add: creating symlink
'/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse' to '../mouse0'
Aug 3 18:43:42 cyborg udevd-event[5238]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:43:42 cyborg udevd-event[5238]: udev_event_run: seq 2324 finished
Aug 3 18:43:42 cyborg udevd[2067]: udev_done: seq 2324, pid [5238] exit with
0, 0 seconds old
Aug 3 18:43:42 cyborg udevd-event[5239]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:43:42 cyborg udevd-event[5239]: udev_event_run: seq 2325 finished
Aug 3 18:43:42 cyborg udevd[2067]: udev_done: seq 2325, pid [5239] exit with
0, 0 seconds old
----replugg with mousedev loaded--------
Aug 3 18:44:11 cyborg udevd[2067]: udev_event_run: seq 2327 forked, pid
[5248], 'remove' 'input', 0 seconds old
Aug 3 18:44:11 cyborg udevd[2067]: udev_event_run: seq 2329 forked, pid
[5249], 'remove' 'usb', 0 seconds old
Aug 3 18:44:11 cyborg udevd[2067]: udev_event_run: seq 2330 forked, pid
[5250], 'remove' 'input', 0 seconds old
Aug 3 18:44:11 cyborg udevd[2067]: udev_event_run: seq 2331 forked, pid
[5251], 'remove' 'input', 0 seconds old
Aug 3 18:44:11 cyborg udevd[2067]: udev_event_run: seq 2333 forked, pid
[5252], 'remove' 'usb', 0 seconds old
Aug 3 18:44:11 cyborg udevd[2067]: udev_event_run: seq 2334 forked, pid
[5253], 'remove' 'usb_device', 0 seconds old
Aug 3 18:44:11 cyborg kernel: usb 2-1: USB disconnect, address 3
Aug 3 18:44:11 cyborg udevd-event[5248]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd'
Aug 3 18:44:11 cyborg udevd-event[5248]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd
'
Aug 3 18:44:11 cyborg udevd-event[5248]: udev_node_remove: removing device
node '/dev/input/event0'
Aug 3 18:44:11 cyborg udevd-event[5248]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:11 cyborg udevd-event[5248]: udev_event_run: seq 2327 finished
Aug 3 18:44:11 cyborg udevd[2067]: udev_done: seq 2327, pid [5248] exit with
0, 0 seconds old
Aug 3 18:44:11 cyborg udevd[2067]: udev_event_run: seq 2328 forked, pid
[5254], 'remove' 'input', 0 seconds old
Aug 3 18:44:11 cyborg udevd-event[5249]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:11 cyborg udevd-event[5249]: udev_event_run: seq 2329 finished
Aug 3 18:44:11 cyborg udevd[2067]: udev_done: seq 2329, pid [5249] exit with
0, 0 seconds old
Aug 3 18:44:11 cyborg udevd-event[5250]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse'
Aug 3 18:44:11 cyborg udevd-event[5250]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mou
se'
Aug 3 18:44:11 cyborg udevd-event[5250]: udev_node_remove: removing device
node '/dev/input/event1'
Aug 3 18:44:11 cyborg udevd-event[5250]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:11 cyborg udevd-event[5250]: udev_event_run: seq 2330 finished
Aug 3 18:44:11 cyborg udevd[2067]: udev_done: seq 2330, pid [5250] exit with
0, 0 seconds old
Aug 3 18:44:11 cyborg udevd-event[5251]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-id/usb-Logitech_USB_Receiver-mouse'
Aug 3 18:44:11 cyborg udevd-event[5251]: udev_node_remove_symlinks: removing
symlink '/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse'
Aug 3 18:44:11 cyborg udevd-event[5251]: udev_node_remove: removing device
node '/dev/input/mouse0'
Aug 3 18:44:11 cyborg udevd-event[5251]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:11 cyborg udevd-event[5251]: udev_event_run: seq 2331 finished
Aug 3 18:44:11 cyborg udevd[2067]: udev_done: seq 2331, pid [5251] exit with
0, 0 seconds old
Aug 3 18:44:11 cyborg udevd[2067]: udev_event_run: seq 2332 forked, pid
[5255], 'remove' 'input', 0 seconds old
Aug 3 18:44:11 cyborg udevd-event[5252]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:11 cyborg udevd-event[5252]: udev_event_run: seq 2333 finished
Aug 3 18:44:11 cyborg udevd[2067]: udev_done: seq 2333, pid [5252] exit with
0, 0 seconds old
Aug 3 18:44:11 cyborg udevd[2067]: udev_event_run: seq 2335 forked, pid
[5256], 'remove' 'usb', 0 seconds old
Aug 3 18:44:11 cyborg udevd-event[5253]: udev_node_remove: removing device
node '/dev/bus/usb/002/003'
Aug 3 18:44:11 cyborg udevd-event[5253]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:11 cyborg udevd-event[5253]: udev_event_run: seq 2334 finished
Aug 3 18:44:11 cyborg udevd[2067]: udev_done: seq 2334, pid [5253] exit with
0, 0 seconds old
Aug 3 18:44:11 cyborg udevd-event[5254]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:11 cyborg udevd-event[5254]: udev_event_run: seq 2328 finished
Aug 3 18:44:11 cyborg udevd[2067]: udev_done: seq 2328, pid [5254] exit with
0, 0 seconds old
Aug 3 18:44:11 cyborg udevd-event[5255]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:11 cyborg udevd-event[5255]: udev_event_run: seq 2332 finished
Aug 3 18:44:11 cyborg udevd[2067]: udev_done: seq 2332, pid [5255] exit with
0, 0 seconds old
Aug 3 18:44:11 cyborg udevd-event[5256]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:11 cyborg udevd-event[5256]: udev_event_run: seq 2335 finished
Aug 3 18:44:11 cyborg udevd[2067]: udev_done: seq 2335, pid [5256] exit with
0, 0 seconds old
Aug 3 18:44:17 cyborg kernel: usb 2-1: new low speed USB device using uhci_hcd
and address 4
Aug 3 18:44:17 cyborg udevd[2067]: udev_event_run: seq 2336 forked, pid
[5257], 'add' 'usb', 0 seconds old
Aug 3 18:44:17 cyborg udevd-event[5257]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/bus' appeared after 0 loops
Aug 3 18:44:17 cyborg udevd-event[5257]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:17 cyborg udevd-event[5257]: udev_event_run: seq 2336 finished
Aug 3 18:44:17 cyborg udevd[2067]: udev_done: seq 2336, pid [5257] exit with
0, 0 seconds old
Aug 3 18:44:17 cyborg kernel: usb 2-1: configuration #1 chosen from 1 choice
Aug 3 18:44:17 cyborg udevd[2067]: udev_event_run: seq 2337 forked, pid
[5258], 'add' 'usb', 0 seconds old
Aug 3 18:44:17 cyborg udevd-event[5258]: wait_for_sysfs: wait for
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bus' for 20 mseconds
Aug 3 18:44:17 cyborg udevd[2067]: udev_event_run: seq 2340 forked, pid
[5259], 'add' 'usb', 0 seconds old
Aug 3 18:44:17 cyborg kernel: input: Logitech USB Receiver as
/class/input/input5
Aug 3 18:44:17 cyborg kernel: input: USB HID v1.10 Keyboard [Logitech USB
Receiver] on usb-0000:00:1d.0-1
Aug 3 18:44:17 cyborg udevd-event[5259]: wait_for_sysfs: wait for
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/bus' for 20 mseconds
Aug 3 18:44:17 cyborg udevd-event[5258]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bus' appeared after 1
loop
s
Aug 3 18:44:17 cyborg udevd-event[5258]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:17 cyborg udevd-event[5258]: run_program: '/sbin/modprobe
usb:v046DpC505d1721dc00dsc00dp00ic03isc01ip01'
Aug 3 18:44:17 cyborg udevd-event[5258]: run_program: '/sbin/modprobe'
(stderr) 'WARNING: Not loading blacklisted module usbkbd'
Aug 3 18:44:17 cyborg udevd-event[5258]: run_program: '/sbin/modprobe'
returned with status 0
Aug 3 18:44:17 cyborg udevd-event[5258]: udev_event_run: seq 2337 finished
Aug 3 18:44:17 cyborg udevd[2067]: udev_done: seq 2337, pid [5258] exit with
0, 0 seconds old
Aug 3 18:44:17 cyborg udevd[2067]: udev_event_run: seq 2338 forked, pid
[5261], 'add' 'input', 0 seconds old
Aug 3 18:44:17 cyborg udevd-event[5259]: wait_for_sysfs: wait for
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/bus' for 20 mseconds
Aug 3 18:44:17 cyborg udevd-event[5261]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:17 cyborg udevd-event[5261]: run_program: '/sbin/modprobe
input:b0003v046DpC505e1721-e0,1,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7
E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,raml0,1,2,3,4,sfw'
Aug 3 18:44:17 cyborg kernel: input: Logitech USB Receiver as
/class/input/input6
Aug 3 18:44:17 cyborg kernel: input: USB HID v1.10 Mouse [Logitech USB
Receiver] on usb-0000:00:1d.0-1
Aug 3 18:44:17 cyborg udevd-event[5259]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/bus' appeared after 2
loop
s
Aug 3 18:44:17 cyborg udevd-event[5259]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:17 cyborg udevd-event[5259]: run_program: '/sbin/modprobe
usb:v046DpC505d1721dc00dsc00dp00ic03isc01ip02'
Aug 3 18:44:17 cyborg udevd-event[5259]: run_program: '/sbin/modprobe'
(stderr) 'WARNING: Not loading blacklisted module usbmouse'
Aug 3 18:44:17 cyborg udevd-event[5259]: run_program: '/sbin/modprobe'
returned with status 0
Aug 3 18:44:17 cyborg udevd-event[5259]: udev_event_run: seq 2340 finished
Aug 3 18:44:17 cyborg udevd[2067]: udev_done: seq 2340, pid [5259] exit with
0, 0 seconds old
Aug 3 18:44:17 cyborg udevd[2067]: udev_event_run: seq 2341 forked, pid
[5264], 'add' 'input', 0 seconds old
Aug 3 18:44:17 cyborg udevd[2067]: udev_event_run: seq 2344 forked, pid
[5265], 'add' 'usb_device', 0 seconds old
Aug 3 18:44:17 cyborg udevd-event[5261]: run_program: '/sbin/modprobe'
(stderr) 'WARNING: Not loading blacklisted module evbug'
Aug 3 18:44:17 cyborg udevd-event[5261]: run_program: '/sbin/modprobe'
returned with status 0
Aug 3 18:44:17 cyborg udevd-event[5261]: udev_event_run: seq 2338 finished
Aug 3 18:44:17 cyborg udevd[2067]: udev_done: seq 2338, pid [5261] exit with
0, 0 seconds old
Aug 3 18:44:17 cyborg udevd[2067]: udev_event_run: seq 2339 forked, pid
[5266], 'add' 'input', 0 seconds old
Aug 3 18:44:17 cyborg udevd-event[5264]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:17 cyborg udevd-event[5264]: run_program: '/sbin/modprobe
input:b0003v046DpC505e1721-e0,1,2,k71,72,73,74,88,8C,8E,8F,9B,9C,9E,9F,A3
,A4,A5,A6,AB,AC,100,101,102,103,104,105,106,107,108,109,10A,10B,10C,10D,10E,10F,110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,
120,121,122,123,124,125'
Aug 3 18:44:17 cyborg udevd-event[5264]: run_program: '/sbin/modprobe'
(stderr) 'FATAL: Module input:b0003v046DpC505e1721_e0,1,2,k71,72,73,74,8
8,8C,8E,8F,9B,9C,9E,9F,A3,A4,A5,A6,AB,AC,100,101,102,103,104,105,106,107,108,109,10A,10B,10C,10D,10E,10F,110,111,112,113,114,115,116,117,118,119
,11A,11B,11C,11D,11E,11F,120,121,122,123,124,125 not found.'
Aug 3 18:44:17 cyborg udevd-event[5264]: run_program: '/sbin/modprobe'
returned with status 1
Aug 3 18:44:17 cyborg udevd-event[5264]: udev_event_run: seq 2341 finished
Aug 3 18:44:17 cyborg udevd[2067]: udev_done: seq 2341, pid [5264] exit with
1, 0 seconds old
Aug 3 18:44:17 cyborg udevd[2067]: udev_event_run: seq 2342 forked, pid
[5268], 'add' 'input', 0 seconds old
Aug 3 18:44:17 cyborg udevd[2067]: udev_event_run: seq 2343 forked, pid
[5269], 'add' 'input', 0 seconds old
Aug 3 18:44:17 cyborg udevd-event[5265]: run_program: '/bin/sh -c
'K=usbdev2.4; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''
Aug 3 18:44:17 cyborg udevd-event[5265]: run_program: '/bin/sh' (stdout)
'bus/usb/002/004'
Aug 3 18:44:17 cyborg udevd-event[5265]: run_program: '/bin/sh' returned with
status 0
Aug 3 18:44:17 cyborg udevd-event[5265]: udev_rules_get_name: rule applied,
'usbdev2.4' becomes 'bus/usb/002/004'
Aug 3 18:44:17 cyborg udevd-event[5265]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@usbdev2.4: No such file or direc
tory
Aug 3 18:44:17 cyborg udevd-event[5265]: udev_node_add: creating device node
'/dev/bus/usb/002/004', major = '189', minor = '131', mode = '0664
', uid = '0', gid = '0'
Aug 3 18:44:17 cyborg udevd-event[5265]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:17 cyborg udevd-event[5265]: udev_event_run: seq 2344 finished
Aug 3 18:44:17 cyborg udevd[2067]: udev_done: seq 2344, pid [5265] exit with
0, 0 seconds old
Aug 3 18:44:17 cyborg udevd-event[5266]: udev_rules_get_name: rule applied,
'event0' becomes 'input/event0'
Aug 3 18:44:17 cyborg udevd-event[5266]: run_program: 'usb_id -x'
Aug 3 18:44:17 cyborg usb_id[5271]: usb_id:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0: if_class 3 protocol 0
Aug 3 18:44:17 cyborg udevd-event[5266]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_VENDOR=Logitech'
Aug 3 18:44:17 cyborg udevd-event[5266]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_MODEL=USB_Receiver'
Aug 3 18:44:17 cyborg udevd-event[5268]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_REVISION=1721'
Aug 3 18:44:17 cyborg udevd-event[5268]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_SERIAL=Logitech_USB_Receiver'
Aug 3 18:44:17 cyborg udevd-event[5268]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_TYPE=hid'
Aug 3 18:44:17 cyborg udevd-event[5268]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_BUS=usb'
Aug 3 18:44:17 cyborg udevd-event[5268]: run_program: '/lib/udev/usb_id'
returned with status 0
Aug 3 18:44:17 cyborg udevd-event[5268]: udev_rules_get_name: add symlink
'input/by-id/usb-Logitech_USB_Receiver-event-mouse'
Aug 3 18:44:17 cyborg udevd-event[5268]: run_program: 'path_id
/class/input/input6/event1'
Aug 3 18:44:17 cyborg udevd-event[5268]: run_program: '/lib/udev/path_id'
(stdout) 'ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1'
Aug 3 18:44:17 cyborg udevd-event[5268]: run_program: '/lib/udev/path_id'
returned with status 0
Aug 3 18:44:17 cyborg udevd-event[5268]: udev_rules_get_name: add symlink
'input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse'
Aug 3 18:44:17 cyborg udevd-event[5268]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@[EMAIL PROTECTED]: No such file or direct
ory
Aug 3 18:44:17 cyborg udevd-event[5268]: udev_node_add: creating device node
'/dev/input/event1', major = '13', minor = '65', mode = '0660', ui
d = '0', gid = '0'
Aug 3 18:44:17 cyborg udevd-event[5268]: udev_node_add: creating symlink
'/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse' to '../event1
'
Aug 3 18:44:17 cyborg udevd-event[5268]: udev_node_add: creating symlink
'/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse' to '../e
vent1'
Aug 3 18:44:17 cyborg udevd-event[5268]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:17 cyborg udevd-event[5268]: udev_event_run: seq 2342 finished
Aug 3 18:44:17 cyborg udevd[2067]: udev_done: seq 2342, pid [5268] exit with
0, 0 seconds old
Aug 3 18:44:17 cyborg udevd-event[5269]: udev_rules_get_name: rule applied,
'mouse0' becomes 'input/mouse0'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: 'usb_id -x'
Aug 3 18:44:17 cyborg usb_id[5281]: usb_id:
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1: if_class 3 protocol 0
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_VENDOR=Logitech'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_MODEL=USB_Receiver'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_REVISION=1721'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_SERIAL=Logitech_USB_Receiver'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_TYPE=hid'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: '/lib/udev/usb_id'
(stdout) 'ID_BUS=usb'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: '/lib/udev/usb_id'
returned with status 0
Aug 3 18:44:17 cyborg udevd-event[5269]: udev_rules_get_name: add symlink
'input/by-id/usb-Logitech_USB_Receiver-mouse'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: 'path_id
/class/input/input6/mouse0'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: '/lib/udev/path_id'
(stdout) 'ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1'
Aug 3 18:44:17 cyborg udevd-event[5269]: run_program: '/lib/udev/path_id'
returned with status 0
Aug 3 18:44:17 cyborg udevd-event[5269]: udev_rules_get_name: add symlink
'input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse'
Aug 3 18:44:17 cyborg udevd-event[5269]: udev_db_get_device: no db file to
read /dev/.udev/db/[EMAIL PROTECTED]@[EMAIL PROTECTED]: No such file or direct
ory
Aug 3 18:44:17 cyborg udevd-event[5269]: udev_node_add: creating device node
'/dev/input/mouse0', major = '13', minor = '32', mode = '0660', ui
d = '0', gid = '0'
Aug 3 18:44:17 cyborg udevd-event[5269]: udev_node_add: creating symlink
'/dev/input/by-id/usb-Logitech_USB_Receiver-mouse' to '../mouse0'
Aug 3 18:44:17 cyborg udevd-event[5269]: udev_node_add: creating symlink
'/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse' to '../mouse0'
Aug 3 18:44:17 cyborg udevd-event[5269]: pass_env_to_socket: passed -1 bytes
to socket '/org/kernel/udev/monitor',
Aug 3 18:44:17 cyborg udevd-event[5269]: udev_event_run: seq 2343 finished
Aug 3 18:44:17 cyborg udevd[2067]: udev_done: seq 2343, pid [5269] exit with
0, 0 seconds old
--
PGP ID 65C92061
pgpB8NusgrOFh.pgp
Description: PGP signature
