Hello,
okay, I can understand the issue with "lp", how should udev easily know
that I have a printer and want to print, so it makes some sense that CUPS
takes care of that.
But udev 0.093-1 doesn't even load "parport_pc" here. I am pretty sure it
did so in earlier versions, cause I did not have it in /etc/modules. On a
Toshiba laptop from a customer it does, but here on my IBM ThinkPad T23
(see below) it does not.
Is this related to
-----------------------------------------------------------------------
udev (0.076-3) unstable; urgency=high
[...]
* Removed the PNP aliases for parport_pc, which now are provided by the
kernel driver.
-- Marco d'Itri <[EMAIL PROTECTED]> Mon, 28 Nov 2005 02:02:31 +0100
-----------------------------------------------------------------------
?
Or is it this issue
-----------------------------------------------------------------------
- some modules, like the drivers for some ISA PNP devices, lack the
sysfs data needed to be automatically loaded and must be loaded
manually.
-----------------------------------------------------------------------
? Then I don't understand why it apparently worked before. I don't know
the exact udev version where this stopped working, but I am pretty sure
that it stopped working quite some while after the udev+hotplug merger.
This is an IBM ThinkPad T23:
[EMAIL PROTECTED]:/usr/share/doc/udev -> lspci
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev
04)
00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev
04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev
02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev
02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev
02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97
Audio Controller (rev 02)
01:00.0 VGA compatible controller: S3 Inc. SuperSavage IX/C SDR (rev 05)
02:00.0 CardBus bridge: Texas Instruments PCI1420
02:00.1 CardBus bridge: Texas Instruments PCI1420
02:02.0 Communication controller: Agere Systems WinModem 56k (rev 01)
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE
(LOM) Ethernet Controller (rev 42)
03:00.0 USB Controller: NEC Corporation USB (rev 43)
03:00.1 USB Controller: NEC Corporation USB (rev 43)
03:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
I can open a new bug report for this one if desired.
Regards,
--
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA B82F 991B EAAC A599 84C7
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
