Package: installation-reports
Boot method: tftp network boot , etch daily build (and beta2 too)
Image version: 2006-07-30 daily build
Date: 2006-07-30
Machine: Hand built machine
Processor: Sempron64 2800 (in 32bit mode)
Memory: 512MB
Partitions:
df -T
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/md1 ext3 74999320 789968 70399544 2% /
tmpfs tmpfs 250372 0 250372 0% /dev/shm
tmpfs tmpfs 10240 76 10164 1% /dev
sfdisk -d /dev/sda
# partition table of /dev/sda
unit: sectors
/dev/sda1 : start= 63, size= 3903732, Id=fd
/dev/sda2 : start= 3903795, size=152392590, Id=fd, bootable
/dev/sda3 : start= 0, size= 0, Id= 0
/dev/sda4 : start= 0, size= 0, Id= 0
sfdisk -d /dev/sdb
# partition table of /dev/sdb
unit: sectors
/dev/sdb1 : start= 63, size= 3903732, Id=fd
/dev/sdb2 : start= 3903795, size=152392590, Id=fd, bootable
/dev/sdb3 : start= 0, size= 0, Id= 0
/dev/sdb4 : start= 0, size= 0, Id= 0
flix:~#
<df -Tl will do; the raw partition table is preferred>
Output of lspci and lspci -n:
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: nVidia Corporation C51G [GeForce
6100] (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller
(rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller
(rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio
(rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link)
00:00.0 0500: 10de:02f1 (rev a2)
00:00.1 0500: 10de:02fa (rev a2)
00:00.2 0500: 10de:02fe (rev a2)
00:00.3 0500: 10de:02f8 (rev a2)
00:00.4 0500: 10de:02f9 (rev a2)
00:00.5 0500: 10de:02ff (rev a2)
00:00.6 0500: 10de:027f (rev a2)
00:00.7 0500: 10de:027e (rev a2)
00:02.0 0604: 10de:02fc (rev a1)
00:03.0 0604: 10de:02fd (rev a1)
00:04.0 0604: 10de:02fb (rev a1)
00:05.0 0300: 10de:0242 (rev a2)
00:09.0 0500: 10de:0270 (rev a2)
00:0a.0 0601: 10de:0260 (rev a3)
00:0a.1 0c05: 10de:0264 (rev a3)
00:0a.2 0500: 10de:0272 (rev a3)
00:0b.0 0c03: 10de:026d (rev a3)
00:0b.1 0c03: 10de:026e (rev a3)
00:0d.0 0101: 10de:0265 (rev a1)
00:0e.0 0101: 10de:0266 (rev a1)
00:0f.0 0101: 10de:0267 (rev a1)
00:10.0 0604: 10de:026f (rev a2)
00:10.1 0403: 10de:026c (rev a2)
00:14.0 0680: 10de:0269 (rev a3)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:0e.0 0c00: 104c:8024
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O ]
Configure network HW: [O ]
Config network: [O ]
Detect CD: []
Load installer modules: [O ]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O ]
Mount partitions: [O ]
Install base system: [O ]
Install boot loader: [E]
Reboot: [O]
Comments/Problems:
The machine was installed remotely over the serial line, and
though it mostly works when you try and install lilo from the menu it
has a syntax error in the serial line that it sticks in the lilo.conf
file which causes the installation stage to fail.
It currently puts in
serial=0,115200n8--
but should only put in
serial=0,115200n8
Apart from that the installer works fine!
Cheers,
--
Peter Taphouse
Bytemark Hosting
http://www.bytemark.co.uk
+44 (0)845 004 3 004
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
