On Monday 24 July 2006 03:57, Trevor de Stigter wrote: > When running in expert mode the installer says that the i82365 (for the > Cirrus logic chip which i think is used on the particular machine as > the io controller for the pcmcia port) is needed
OK, so the module is needed. What is the output if you try to load it manually (modprobe i82365) from VT2? Note that there is probably very little we can do to resolve this. This sounds like possibly a kernel issue and the 2.4.27 kernel is no longer maintained. Your best chance is probably to try to setup the network manually from VT2, but that implies that you know which steps to follow... If you are willing to install Etch instead of Sarge, you could try the floppies availably from [1], which use a 2.6 kernel. These floppies are still under development, but have resulted in successful installs. You probably need the net-drivers-extra-2.6.img driver floppy (besides the boot and root floppies). [1] http://www-timc.imag.fr/Sylvain.Ferriol/debian/d-i/i386/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
