Package: installation-reports Boot method: 3.1r2 binary cd Image version: 2006 apr 5 debian.org Date: 2006 Jan 15
Machine: HP Vectra VL400 Processor: Intel PIII 933MHz Memory: 384MB Partitions: Output of "sfdisk -d /dev/hda" : # partition table of /dev/hda unit: sectors /dev/hda1 : start= 63, size= 192717, Id=83 /dev/hda2 : start= 192780, size= 19535040, Id=83 /dev/hda3 : start= 38539935, size= 1301265, Id=82 /dev/hda4 : start= 19727820, size= 18812115, Id=83 Output of "df -Tl": Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/hda2 ext3 9614148 5538516 3587256 61% / tmpfs tmpfs 192864 0 192864 0% /dev/shm /dev/hda1 ext3 90297 17125 68355 21% /boot /dev/hda4 ext3 9258240 32904 8755036 1% /home Output of lspci and lspci -n: Output of "lspci": lspci0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) 0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) 0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) 0000:00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02) 0000:01:01.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 0000:01:04.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Outpus of "lspci -n" 0000:00:00.0 0600: 8086:1130 (rev 02) 0000:00:02.0 0300: 8086:1132 (rev 02) 0000:00:1e.0 0604: 8086:2418 (rev 02) 0000:00:1f.0 0601: 8086:2410 (rev 02) 0000:00:1f.1 0101: 8086:2411 (rev 02) 0000:00:1f.2 0c03: 8086:2412 (rev 02) 0000:00:1f.3 0c05: 8086:2413 (rev 02) 0000:00:1f.5 0401: 8086:2415 (rev 02) 0000:01:01.0 0200: 100b:0020 0000:01:04.0 0200: 10b7:9200 (rev 78) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: No problems, all worked well.
smime.p7s
Description: S/MIME Cryptographic Signature