Package: nvidia-legacy-390xx-kernel-dkms Version: 390.157-14 I did read [1], and I understand `nvidia-legacy-390xx-driver` is deprecated. Anyway -mostly for reference- here is my lame attempt [2]:
% cat /etc/apt/sources.list.d/unstable.list deb http://deb.debian.org/debian unstable main contrib non-free non-free-firmware % cat /etc/apt/preferences.d/unstable Package: * Pin: release a=unstable Pin-Priority: -1 % sudo apt update && sudo apt install nvidia-legacy-390xx-driver -t unstable Leads to: % dmesg [...] [ 11.166966] Initializing XFRM netlink socket [ 11.175387] traps: gdm3[4753] trap int3 ip:7fdb9f9b921a sp:7ffcbd306b00 error:0 in libglib-2.0.so.0.8400.4[6721a,7fdb9f971000+a1000] [ 12.582986] traps: gdm3[4916] trap int3 ip:7f89d460221a sp:7fff7699ddf0 error:0 in libglib-2.0.so.0.8400.4[6721a,7f89d45ba000+a1000] [ 22.784285] logitech-hidpp-device 0003:046D:2011.0007: HID++ 1.0 device connected. Full dmesg attached in case that helps bots. -M [1] https://wiki.debian.org/NvidiaGraphicsDrivers#sid-390 [2] https://superuser.com/questions/1858145/install-nvidia-legacy-300xx-driver-on-debian-bookworm
[ 0.000000] Linux version 6.12.57+deb13-amd64 ([email protected]) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.57-1 (2025-11-05) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.57+deb13-amd64 root=UUID=755218a3-0198-49ec-8520-ba23371546cf ro nvidia-drm.modeset=1 nvidia-drm.fbdev=1 quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ccf70fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ccf71000-0x00000000ccf77fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ccf78000-0x00000000cd914fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cd915000-0x00000000cdc95fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cdc96000-0x00000000de173fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de174000-0x00000000de1fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de1fe000-0x00000000de360fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de361000-0x00000000de88cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de88d000-0x00000000deffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Inspiron 3847/088DT1 , BIOS A08 06/29/2015 [ 0.000000] DMI: Memory slots populated: 2/2 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3591.763 MHz processor [ 0.000593] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000596] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000603] last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.000607] MTRR map: 8 entries (5 fixed + 3 variable; max 25), built from 10 variable MTRRs [ 0.000608] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000850] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000853] last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.006777] found SMP MP-table at [mem 0x000fdbb0-0x000fdbbf] [ 0.006791] Using GB pages for direct mapping [ 0.007175] RAMDISK: [mem 0x2dda9000-0x32ecbfff] [ 0.007452] ACPI: Early table checksum verification disabled [ 0.007454] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL ) [ 0.007457] ACPI: XSDT 0x00000000DE472088 00008C (v01 DELL WN09 01072009 AMI 00010013) [ 0.007461] ACPI: FACP 0x00000000DE47E868 00010C (v05 DELL WN09 01072009 AMI 00010013) [ 0.007466] ACPI: DSDT 0x00000000DE4721A8 00C6BD (v02 DELL WN09 00000000 INTL 20120711) [ 0.007468] ACPI: FACS 0x00000000DE88B080 000040 [ 0.007471] ACPI: APIC 0x00000000DE47E978 000092 (v03 DELL WN09 01072009 AMI 00010013) [ 0.007473] ACPI: FPDT 0x00000000DE47EA10 000044 (v01 DELL WN09 01072009 AMI 00010013) [ 0.007475] ACPI: ASF! 0x00000000DE47EA58 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.007478] ACPI: SLIC 0x00000000DE47EB00 000176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.007480] ACPI: SSDT 0x00000000DE47EC78 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.007482] ACPI: SSDT 0x00000000DE47F1B8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.007485] ACPI: MCFG 0x00000000DE47FC90 00003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.007487] ACPI: HPET 0x00000000DE47FCD0 000038 (v01 DELL WN09 01072009 AMI. 00000005) [ 0.007489] ACPI: SSDT 0x00000000DE47FD08 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.007492] ACPI: SSDT 0x00000000DE480078 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.007494] ACPI: MSDM 0x00000000DE4835A0 000055 (v03 DELL WN09 01072009 AMI 00010013) [ 0.007497] ACPI: DMAR 0x00000000DE4835F8 000080 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.007499] ACPI: Reserving FACP table memory at [mem 0xde47e868-0xde47e973] [ 0.007500] ACPI: Reserving DSDT table memory at [mem 0xde4721a8-0xde47e864] [ 0.007500] ACPI: Reserving FACS table memory at [mem 0xde88b080-0xde88b0bf] [ 0.007501] ACPI: Reserving APIC table memory at [mem 0xde47e978-0xde47ea09] [ 0.007502] ACPI: Reserving FPDT table memory at [mem 0xde47ea10-0xde47ea53] [ 0.007502] ACPI: Reserving ASF! table memory at [mem 0xde47ea58-0xde47eafc] [ 0.007503] ACPI: Reserving SLIC table memory at [mem 0xde47eb00-0xde47ec75] [ 0.007503] ACPI: Reserving SSDT table memory at [mem 0xde47ec78-0xde47f1b0] [ 0.007504] ACPI: Reserving SSDT table memory at [mem 0xde47f1b8-0xde47fc8f] [ 0.007504] ACPI: Reserving MCFG table memory at [mem 0xde47fc90-0xde47fccb] [ 0.007505] ACPI: Reserving HPET table memory at [mem 0xde47fcd0-0xde47fd07] [ 0.007506] ACPI: Reserving SSDT table memory at [mem 0xde47fd08-0xde480074] [ 0.007506] ACPI: Reserving SSDT table memory at [mem 0xde480078-0xde48359f] [ 0.007507] ACPI: Reserving MSDM table memory at [mem 0xde4835a0-0xde4835f4] [ 0.007507] ACPI: Reserving DMAR table memory at [mem 0xde4835f8-0xde483677] [ 0.007553] No NUMA configuration found [ 0.007554] Faking a node at [mem 0x0000000000000000-0x000000041effffff] [ 0.007562] NODE_DATA(0) allocated [mem 0x41efd5680-0x41effffff] [ 0.007762] Zone ranges: [ 0.007763] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.007764] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.007765] Normal [mem 0x0000000100000000-0x000000041effffff] [ 0.007766] Device empty [ 0.007767] Movable zone start for each node [ 0.007769] Early memory node ranges [ 0.007769] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.007771] node 0: [mem 0x0000000000100000-0x00000000ccf70fff] [ 0.007772] node 0: [mem 0x00000000ccf78000-0x00000000cd914fff] [ 0.007772] node 0: [mem 0x00000000cdc96000-0x00000000de173fff] [ 0.007773] node 0: [mem 0x00000000de1fe000-0x00000000de360fff] [ 0.007773] node 0: [mem 0x00000000defff000-0x00000000deffffff] [ 0.007774] node 0: [mem 0x0000000100000000-0x000000041effffff] [ 0.007776] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff] [ 0.007780] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.007799] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.012673] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.013100] On node 0, zone DMA32: 897 pages in unavailable ranges [ 0.013104] On node 0, zone DMA32: 138 pages in unavailable ranges [ 0.013133] On node 0, zone DMA32: 3230 pages in unavailable ranges [ 0.013418] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.013451] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.013528] ACPI: PM-Timer IO Port: 0x1808 [ 0.013535] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.013545] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.013547] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.013549] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.013552] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.013553] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.013556] TSC deadline timer available [ 0.013560] CPU topo: Max. logical packages: 1 [ 0.013561] CPU topo: Max. logical dies: 1 [ 0.013561] CPU topo: Max. dies per package: 1 [ 0.013566] CPU topo: Max. threads per core: 2 [ 0.013567] CPU topo: Num. cores per package: 4 [ 0.013567] CPU topo: Num. threads per package: 8 [ 0.013568] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.013581] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.013582] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x000fffff] [ 0.013584] PM: hibernation: Registered nosave memory: [mem 0xccf71000-0xccf77fff] [ 0.013585] PM: hibernation: Registered nosave memory: [mem 0xcd915000-0xcdc95fff] [ 0.013586] PM: hibernation: Registered nosave memory: [mem 0xde174000-0xde1fdfff] [ 0.013587] PM: hibernation: Registered nosave memory: [mem 0xde361000-0xdeffefff] [ 0.013588] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xffffffff] [ 0.013590] [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.013591] Booting paravirtualized kernel on bare hardware [ 0.013593] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.017968] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.018465] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.018470] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.018473] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.018488] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.57+deb13-amd64 root=UUID=755218a3-0198-49ec-8520-ba23371546cf ro nvidia-drm.modeset=1 nvidia-drm.fbdev=1 quiet [ 0.018556] random: crng init done [ 0.020145] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.020951] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.021064] Fallback order for Node 0: 0 [ 0.021067] Built 1 zonelists, mobility grouping on. Total pages: 4181740 [ 0.021068] Policy zone: Normal [ 0.021075] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.021081] software IO TLB: area num 8. [ 0.044536] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.044559] Kernel/User page tables isolation: enabled [ 0.044590] ftrace: allocating 45728 entries in 179 pages [ 0.051086] ftrace: allocated 179 pages with 5 groups [ 0.051651] Dynamic Preempt: voluntary [ 0.051696] rcu: Preemptible hierarchical RCU implementation. [ 0.051697] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.051698] Trampoline variant of Tasks RCU enabled. [ 0.051698] Rude variant of Tasks RCU enabled. [ 0.051698] Tracing variant of Tasks RCU enabled. [ 0.051699] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.051700] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.051708] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.051709] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.051711] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.055748] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.055930] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.055996] spurious 8259A interrupt: IRQ7. [ 0.061952] Console: colour VGA+ 80x25 [ 0.061954] printk: legacy console [tty0] enabled [ 0.061987] ACPI: Core revision 20240827 [ 0.062055] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.062068] APIC: Switch to symmetric I/O mode setup [ 0.062069] DMAR: Host address width 39 [ 0.062070] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.062074] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.062076] DMAR: RMRR base: 0x000000dee9a000 end: 0x000000deea8fff [ 0.062079] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0 [ 0.062080] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.062081] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.062344] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.062345] x2apic enabled [ 0.062392] APIC: Switched APIC routing to: cluster x2apic [ 0.062797] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.082068] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33c5ee93d8f, max_idle_ns: 440795345412 ns [ 0.082071] Calibrating delay loop (skipped), value calculated using timer frequency.. 7183.52 BogoMIPS (lpj=14367052) [ 0.082092] CPU0: Thermal monitoring enabled (TM1) [ 0.082120] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.082121] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.082124] process: using mwait in idle threads [ 0.082125] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.082127] Spectre V2 : Mitigation: Retpolines [ 0.082128] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.082128] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.082130] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.082131] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.082132] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.082133] MDS: Mitigation: Clear CPU buffers [ 0.082134] MMIO Stale Data: Unknown: No mitigations [ 0.082135] SRBDS: Mitigation: Microcode [ 0.082137] VMSCAPE: Mitigation: IBPB before exit to userspace [ 0.082140] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.082141] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.082142] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.082143] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.082145] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.097356] Freeing SMP alternatives memory: 40K [ 0.097359] pid_max: default: 32768 minimum: 301 [ 0.097391] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.097442] landlock: Up and running. [ 0.097443] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.097508] AppArmor: AppArmor initialized [ 0.097525] TOMOYO Linux initialized [ 0.097659] LSM support for eBPF active [ 0.097708] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.097722] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.098118] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.098290] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.098318] ... version: 3 [ 0.098319] ... bit width: 48 [ 0.098319] ... generic registers: 4 [ 0.098320] ... value mask: 0000ffffffffffff [ 0.098321] ... max period: 00007fffffffffff [ 0.098322] ... fixed-purpose events: 3 [ 0.098322] ... event mask: 000000070000000f [ 0.098424] signal: max sigframe size: 1776 [ 0.098434] Estimated ratio of average max frequency by base frequency (times 1024): 1080 [ 0.099852] rcu: Hierarchical SRCU implementation. [ 0.099854] rcu: Max phase no-delay instances is 1000. [ 0.099886] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.100414] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.100470] smp: Bringing up secondary CPUs ... [ 0.100549] smpboot: x86: Booting SMP configuration: [ 0.100550] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.102925] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.102925] VMSCAPE: SMT on, STIBP is required for full protection. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/vmscape.html for more details. [ 0.102925] smp: Brought up 1 node, 8 CPUs [ 0.102925] smpboot: Total of 8 processors activated (57468.20 BogoMIPS) [ 0.125160] node 0 deferred pages initialised in 16ms [ 0.125872] Memory: 16231760K/16726960K available (16384K kernel code, 2496K rwdata, 11800K rodata, 4152K init, 4936K bss, 484244K reserved, 0K cma-reserved) [ 0.126407] devtmpfs: initialized [ 0.126407] x86/mm: Memory block size: 128MB [ 0.127164] ACPI: PM: Registering ACPI NVS region [mem 0xccf71000-0xccf77fff] (28672 bytes) [ 0.127164] ACPI: PM: Registering ACPI NVS region [mem 0xde361000-0xde88cfff] (5423104 bytes) [ 0.127164] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.127164] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.127164] pinctrl core: initialized pinctrl subsystem [ 0.127164] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.127164] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.127164] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.127164] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.127164] audit: initializing netlink subsys (disabled) [ 0.127164] audit: type=2000 audit(1767702321.000:1): state=initialized audit_enabled=0 res=1 [ 0.127164] thermal_sys: Registered thermal governor 'fair_share' [ 0.127164] thermal_sys: Registered thermal governor 'bang_bang' [ 0.127164] thermal_sys: Registered thermal governor 'step_wise' [ 0.127164] thermal_sys: Registered thermal governor 'user_space' [ 0.127164] thermal_sys: Registered thermal governor 'power_allocator' [ 0.127164] cpuidle: using governor ladder [ 0.127164] cpuidle: using governor menu [ 0.127164] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.127164] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.127164] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.127164] PCI: Using configuration type 1 for base access [ 0.127164] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.127164] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.127164] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.127164] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.127164] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.127164] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.127164] ACPI: Added _OSI(Module Device) [ 0.127164] ACPI: Added _OSI(Processor Device) [ 0.127164] ACPI: Added _OSI(Processor Aggregator Device) [ 0.136884] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.137442] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.150282] ACPI: Dynamic OEM Table Load: [ 0.150288] ACPI: SSDT 0xFFFF88FD40F25400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.150684] ACPI: Dynamic OEM Table Load: [ 0.150688] ACPI: SSDT 0xFFFF88FD40F28800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.151110] ACPI: Dynamic OEM Table Load: [ 0.151113] ACPI: SSDT 0xFFFF89004E8D2600 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.154233] ACPI: Interpreter enabled [ 0.154251] ACPI: PM: (supports S0 S3 S4 S5) [ 0.154252] ACPI: Using IOAPIC for interrupt routing [ 0.154270] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.154271] PCI: Using E820 reservations for host bridge windows [ 0.154402] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.160300] ACPI: \_TZ_.FN00: New power resource [ 0.160350] ACPI: \_TZ_.FN01: New power resource [ 0.160395] ACPI: \_TZ_.FN02: New power resource [ 0.160439] ACPI: \_TZ_.FN03: New power resource [ 0.160483] ACPI: \_TZ_.FN04: New power resource [ 0.160908] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.160912] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.162272] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.162592] PCI host bridge to bus 0000:00 [ 0.162595] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.162597] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.162598] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.162600] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.162601] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.162602] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.162613] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 conventional PCI endpoint [ 0.162667] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 PCIe Root Port [ 0.162677] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.162679] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.162681] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.162685] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.162703] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.162876] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.162891] pci 0000:00:14.0: BAR 0 [mem 0xf7400000-0xf740ffff 64bit] [ 0.162942] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.163016] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.163031] pci 0000:00:16.0: BAR 0 [mem 0xf741a000-0xf741a00f 64bit] [ 0.163085] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.163134] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.163148] pci 0000:00:1a.0: BAR 0 [mem 0xf7418000-0xf74183ff] [ 0.163219] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.163280] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.163295] pci 0000:00:1b.0: BAR 0 [mem 0xf7410000-0xf7413fff 64bit] [ 0.163356] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.163421] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.163443] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.163497] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.163515] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.163518] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.163664] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 PCIe Root Port [ 0.163686] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.163690] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.163693] pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff] [ 0.163701] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.163745] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.163762] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.163765] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.163912] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.163934] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.163938] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.163941] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff] [ 0.163949] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.163993] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.164009] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.164011] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.164161] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.164184] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.164190] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff] [ 0.164243] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.164259] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.164261] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.164412] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.164427] pci 0000:00:1d.0: BAR 0 [mem 0xf7417000-0xf74173ff] [ 0.164499] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.164563] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100 conventional PCI endpoint [ 0.164711] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.164721] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.164728] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.164734] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.164740] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.164747] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.164753] pci 0000:00:1f.2: BAR 5 [mem 0xf7416000-0xf74167ff] [ 0.164782] pci 0000:00:1f.2: PME# supported from D3hot [ 0.164833] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.164847] pci 0000:00:1f.3: BAR 0 [mem 0xf7415000-0xf74150ff 64bit] [ 0.164864] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.164943] pci 0000:01:00.0: [10de:104c] type 00 class 0x030000 PCIe Endpoint [ 0.164955] pci 0000:01:00.0: BAR 0 [mem 0xf6000000-0xf6ffffff] [ 0.164965] pci 0000:01:00.0: BAR 1 [mem 0xe8000000-0xefffffff 64bit pref] [ 0.164976] pci 0000:01:00.0: BAR 3 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.164983] pci 0000:01:00.0: BAR 5 [io 0xe000-0xe07f] [ 0.164990] pci 0000:01:00.0: ROM [mem 0xf7000000-0xf707ffff pref] [ 0.165006] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.165101] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300 PCIe Endpoint [ 0.165113] pci 0000:01:00.1: BAR 0 [mem 0xf7080000-0xf7083fff] [ 0.165225] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.165268] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.165346] pci 0000:03:00.0: [1c00:3253] type 00 class 0x070005 PCIe Legacy Endpoint [ 0.165376] pci 0000:03:00.0: BAR 0 [io 0xd000-0xd0ff] [ 0.165392] pci 0000:03:00.0: BAR 1 [mem 0xf2200000-0xf2207fff pref] [ 0.165408] pci 0000:03:00.0: BAR 2 [io 0xd100-0xd103] [ 0.165472] pci 0000:03:00.0: ROM [mem 0xf7300000-0xf7307fff pref] [ 0.165567] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.165702] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.165774] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint [ 0.165794] pci 0000:04:00.0: BAR 0 [io 0xc000-0xc0ff] [ 0.165820] pci 0000:04:00.0: BAR 2 [mem 0xf7200000-0xf7200fff 64bit] [ 0.165837] pci 0000:04:00.0: BAR 4 [mem 0xf2100000-0xf2103fff 64bit pref] [ 0.165941] pci 0000:04:00.0: supports D1 D2 [ 0.165942] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166109] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.166198] pci 0000:05:00.0: [168c:0036] type 00 class 0x028000 PCIe Endpoint [ 0.166242] pci 0000:05:00.0: BAR 0 [mem 0xf7100000-0xf717ffff 64bit] [ 0.166321] pci 0000:05:00.0: ROM [mem 0xf7180000-0xf718ffff pref] [ 0.166455] pci 0000:05:00.0: supports D1 D2 [ 0.166456] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166672] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.167135] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.167163] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.167189] ACPI: PCI: Interrupt link LNKC configured for IRQ 4 [ 0.167214] ACPI: PCI: Interrupt link LNKD configured for IRQ 5 [ 0.167239] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.167239] ACPI: PCI: Interrupt link LNKE disabled [ 0.167264] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.167265] ACPI: PCI: Interrupt link LNKF disabled [ 0.167289] ACPI: PCI: Interrupt link LNKG configured for IRQ 3 [ 0.167314] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.167584] iommu: Default domain type: Translated [ 0.167584] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.167584] pps_core: LinuxPPS API ver. 1 registered [ 0.167584] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.167584] PTP clock support registered [ 0.167584] EDAC MC: Ver: 3.0.0 [ 0.167584] NetLabel: Initializing [ 0.167584] NetLabel: domain hash size = 128 [ 0.167584] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.167584] NetLabel: unlabeled traffic allowed by default [ 0.167584] PCI: Using ACPI for IRQ routing [ 0.167584] PCI: pci_cache_line_size set to 64 bytes [ 0.167584] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.167584] e820: reserve RAM buffer [mem 0xccf71000-0xcfffffff] [ 0.167584] e820: reserve RAM buffer [mem 0xcd915000-0xcfffffff] [ 0.167584] e820: reserve RAM buffer [mem 0xde174000-0xdfffffff] [ 0.167584] e820: reserve RAM buffer [mem 0xde361000-0xdfffffff] [ 0.167584] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.167584] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 0.167584] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.167584] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.167584] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.167584] vgaarb: loaded [ 0.167584] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.167584] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.171091] clocksource: Switched to clocksource tsc-early [ 0.171201] VFS: Disk quotas dquot_6.6.0 [ 0.171208] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.171216] AppArmor: AppArmor Filesystem Enabled [ 0.171216] pnp: PnP ACPI init [ 0.171216] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.171216] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.171216] system 00:01: [io 0xffff] has been reserved [ 0.171216] system 00:01: [io 0xffff] has been reserved [ 0.171216] system 00:01: [io 0xffff] has been reserved [ 0.171216] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.171216] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.171216] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.171216] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.171216] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.171216] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.171216] system 00:03: [io 0x0a00-0x0a1f] has been reserved [ 0.171216] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.171216] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.171216] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.171216] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.171216] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.171216] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.171216] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.171216] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.171216] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.171216] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.171216] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.171216] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.171216] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.171216] system 00:05: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.171216] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.171216] pnp: PnP ACPI: found 6 devices [ 0.176351] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.176397] NET: Registered PF_INET protocol family [ 0.176508] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.186946] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.186968] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.187015] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.187199] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.187395] TCP: Hash tables configured (established 131072 bind 65536) [ 0.187458] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.187514] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.187545] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.187590] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.187596] NET: Registered PF_XDP protocol family [ 0.187603] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.187606] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.187608] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.187615] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff]: assigned [ 0.187617] pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref]: assigned [ 0.187620] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned [ 0.187622] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.187624] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.187627] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.187628] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.187631] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.187633] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.187637] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff] [ 0.187641] pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref] [ 0.187646] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.187648] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.187652] pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff] [ 0.187655] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.187661] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.187662] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.187666] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff] [ 0.187670] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.187675] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.187679] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff] [ 0.187686] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.187687] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.187688] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.187689] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.187690] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfeafffff window] [ 0.187692] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.187693] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.187694] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.187695] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.187696] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe01fffff] [ 0.187697] pci_bus 0000:02: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref] [ 0.187698] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.187699] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff] [ 0.187700] pci_bus 0000:03: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.187701] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.187702] pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff] [ 0.187703] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.187704] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.206175] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 17842 usecs [ 0.226172] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 19507 usecs [ 0.226192] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec [ 0.226215] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.226232] PCI: CLS 64 bytes, default 64 [ 0.226271] DMAR: No ATSR found [ 0.226272] DMAR: No SATC found [ 0.226273] DMAR: dmar0: Using Queued invalidation [ 0.226307] Trying to unpack rootfs image as initramfs... [ 0.226322] pci 0000:00:00.0: Adding to iommu group 0 [ 0.226333] pci 0000:00:01.0: Adding to iommu group 1 [ 0.226341] pci 0000:00:14.0: Adding to iommu group 2 [ 0.226349] pci 0000:00:16.0: Adding to iommu group 3 [ 0.226356] pci 0000:00:1a.0: Adding to iommu group 4 [ 0.226363] pci 0000:00:1b.0: Adding to iommu group 5 [ 0.226373] pci 0000:00:1c.0: Adding to iommu group 6 [ 0.226380] pci 0000:00:1c.2: Adding to iommu group 7 [ 0.226386] pci 0000:00:1c.3: Adding to iommu group 8 [ 0.226393] pci 0000:00:1c.4: Adding to iommu group 9 [ 0.226399] pci 0000:00:1d.0: Adding to iommu group 10 [ 0.226412] pci 0000:00:1f.0: Adding to iommu group 11 [ 0.226419] pci 0000:00:1f.2: Adding to iommu group 11 [ 0.226427] pci 0000:00:1f.3: Adding to iommu group 11 [ 0.226430] pci 0000:01:00.0: Adding to iommu group 1 [ 0.226433] pci 0000:01:00.1: Adding to iommu group 1 [ 0.226439] pci 0000:03:00.0: Adding to iommu group 12 [ 0.226445] pci 0000:04:00.0: Adding to iommu group 13 [ 0.226452] pci 0000:05:00.0: Adding to iommu group 14 [ 0.227348] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.227350] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.227351] software IO TLB: mapped [mem 0x00000000da174000-0x00000000de174000] (64MB) [ 0.227685] Initialise system trusted keyrings [ 0.227692] Key type blacklist registered [ 0.227739] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.227745] zbud: loaded [ 0.227807] fuse: init (API version 7.41) [ 0.227898] integrity: Platform Keyring initialized [ 0.227901] integrity: Machine keyring initialized [ 0.242075] Key type asymmetric registered [ 0.242079] Asymmetric key parser 'x509' registered [ 0.409439] Freeing initrd memory: 83084K [ 0.413048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.413079] io scheduler mq-deadline registered [ 0.414194] ledtrig-cpu: registered to indicate activity on CPUs [ 0.414340] pcieport 0000:00:01.0: PME: Signaling with IRQ 25 [ 0.414457] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 [ 0.414476] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.414632] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27 [ 0.414752] pcieport 0000:00:1c.3: PME: Signaling with IRQ 28 [ 0.414865] pcieport 0000:00:1c.4: PME: Signaling with IRQ 29 [ 0.414930] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.415764] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.415767] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.415885] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.415887] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.415977] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.416499] 0000:03:00.0: ttyS0 at I/O 0xd0c0 (irq = 18, base_baud = 115200) is a XR16850 [ 0.416831] 0000:03:00.0: ttyS1 at I/O 0xd0c8 (irq = 18, base_baud = 115200) is a XR16850 [ 0.417191] Linux agpgart interface v0.103 [ 0.417631] i8042: PNP: No PS/2 controller found. [ 0.417670] mousedev: PS/2 mouse device common for all mice [ 0.417687] rtc_cmos 00:02: RTC can wake from S4 [ 0.417877] rtc_cmos 00:02: registered as rtc0 [ 0.417907] rtc_cmos 00:02: setting system clock to 2026-01-06T12:25:21 UTC (1767702321) [ 0.417927] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 0.418054] intel_pstate: Intel P-state driver initializing [ 0.418912] NET: Registered PF_INET6 protocol family [ 0.424761] Segment Routing with IPv6 [ 0.424769] In-situ OAM (IOAM) with IPv6 [ 0.424783] mip6: Mobile IPv6 [ 0.424785] NET: Registered PF_PACKET protocol family [ 0.424845] mpls_gso: MPLS GSO support [ 0.425161] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.425267] microcode: Current revision: 0x00000028 [ 0.425269] microcode: Updated early from: 0x0000001d [ 0.425406] IPI shorthand broadcast: enabled [ 0.426645] sched_clock: Marking stable (420001599, 6111235)->(624284549, -198171715) [ 0.426779] registered taskstats version 1 [ 0.426887] Loading compiled-in X.509 certificates [ 0.442336] Loaded X.509 cert 'Build time autogenerated kernel key: 7c2b230a25e7258756ba9d8e66b30d6d89429d6d' [ 0.443718] Demotion targets for Node 0: null [ 0.443898] Key type .fscrypt registered [ 0.443900] Key type fscrypt-provisioning registered [ 0.469082] Key type encrypted registered [ 0.469090] AppArmor: AppArmor sha256 policy hashing enabled [ 0.469100] ima: No TPM chip found, activating TPM-bypass! [ 0.469103] ima: Allocated hash algorithm: sha256 [ 0.469117] ima: No architecture policies found [ 0.469131] evm: Initialising EVM extended attributes: [ 0.469132] evm: security.selinux [ 0.469134] evm: security.SMACK64 (disabled) [ 0.469135] evm: security.SMACK64EXEC (disabled) [ 0.469137] evm: security.SMACK64TRANSMUTE (disabled) [ 0.469138] evm: security.SMACK64MMAP (disabled) [ 0.469139] evm: security.apparmor [ 0.469140] evm: security.ima [ 0.469141] evm: security.capability [ 0.469143] evm: HMAC attrs: 0x1 [ 0.470417] RAS: Correctable Errors collector initialized. [ 0.477099] clk: Disabling unused clocks [ 0.477104] PM: genpd: Disabling unused power domains [ 0.478316] Freeing unused decrypted memory: 2028K [ 0.478792] Freeing unused kernel image (initmem) memory: 4152K [ 0.478849] Write protecting the kernel read-only data: 28672k [ 0.479184] Freeing unused kernel image (rodata/data gap) memory: 488K [ 0.516377] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.516379] x86/mm: Checking user space page tables [ 0.547860] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.547864] Run /init as init process [ 0.547865] with arguments: [ 0.547866] /init [ 0.547866] with environment: [ 0.547867] HOME=/ [ 0.547868] TERM=linux [ 0.637765] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.650631] ACPI: button: Power Button [PWRB] [ 0.650706] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.650767] ACPI: button: Power Button [PWRF] [ 0.661752] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.661782] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.663759] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20240827/utaddress-204) [ 0.663764] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.663767] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20240827/utaddress-204) [ 0.663770] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.663770] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20240827/utaddress-204) [ 0.663773] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20240827/utaddress-204) [ 0.663777] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.663777] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20240827/utaddress-204) [ 0.663780] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20240827/utaddress-204) [ 0.663782] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.663783] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.663804] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 0.678748] ACPI: bus type USB registered [ 0.678772] usbcore: registered new interface driver usbfs [ 0.678780] usbcore: registered new interface driver hub [ 0.678790] usbcore: registered new device driver usb [ 0.681431] SCSI subsystem initialized [ 0.686780] iTCO_vendor_support: vendor-support=0 [ 0.691065] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.691071] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.691081] ehci-pci 0000:00:1a.0: debug port 2 [ 0.694992] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7418000 [ 0.708175] r8169 0000:04:00.0 eth0: RTL8168g/8111g, 64:00:6a:09:f1:84, XID 4c0, IRQ 30 [ 0.708179] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 0.709381] libata version 3.00 loaded. [ 0.710123] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.710156] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 0.710159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.710160] usb usb1: Product: EHCI Host Controller [ 0.710161] usb usb1: Manufacturer: Linux 6.12.57+deb13-amd64 ehci_hcd [ 0.710162] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.710272] hub 1-0:1.0: USB hub found [ 0.710280] hub 1-0:1.0: 2 ports detected [ 0.710415] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.710421] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.710431] ehci-pci 0000:00:1d.0: debug port 2 [ 0.714336] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7417000 [ 0.726193] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.726248] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 0.726250] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.726251] usb usb2: Product: EHCI Host Controller [ 0.726253] usb usb2: Manufacturer: Linux 6.12.57+deb13-amd64 ehci_hcd [ 0.726254] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.726409] hub 2-0:1.0: USB hub found [ 0.726415] hub 2-0:1.0: 2 ports detected [ 0.728137] r8169 0000:04:00.0 enp4s0: renamed from eth0 [ 0.731275] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 0.731359] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 0.733021] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.733026] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.734090] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.734301] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.734303] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.734306] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.734332] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 0.734334] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.734345] usb usb3: Product: xHCI Host Controller [ 0.734346] usb usb3: Manufacturer: Linux 6.12.57+deb13-amd64 xhci-hcd [ 0.734347] usb usb3: SerialNumber: 0000:00:14.0 [ 0.734484] hub 3-0:1.0: USB hub found [ 0.734506] hub 3-0:1.0: 10 ports detected [ 0.735635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 0.735638] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.735639] usb usb4: Product: xHCI Host Controller [ 0.735640] usb usb4: Manufacturer: Linux 6.12.57+deb13-amd64 xhci-hcd [ 0.735641] usb usb4: SerialNumber: 0000:00:14.0 [ 0.735733] hub 4-0:1.0: USB hub found [ 0.735739] hub 4-0:1.0: 2 ports detected [ 0.740232] ahci 0000:00:1f.2: version 3.0 [ 0.740343] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.740345] ahci 0000:00:1f.2: 4/4 ports implemented (port mask 0x33) [ 0.740347] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems [ 0.762736] scsi host0: ahci [ 0.762968] scsi host1: ahci [ 0.763138] scsi host2: ahci [ 0.763290] scsi host3: ahci [ 0.763388] scsi host4: ahci [ 0.763483] scsi host5: ahci [ 0.763531] ata1: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416100 irq 39 lpm-pol 3 [ 0.763536] ata2: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416180 irq 39 lpm-pol 3 [ 0.763538] ata3: DUMMY [ 0.763539] ata4: DUMMY [ 0.763541] ata5: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416300 irq 39 lpm-pol 3 [ 0.763545] ata6: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416380 irq 39 lpm-pol 3 [ 0.962192] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.974227] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.990193] usb 3-3: new full-speed USB device number 2 using xhci_hcd [ 1.073711] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.073761] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.075291] ata6.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 1.075309] ata6.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.076095] ata6.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133 [ 1.077565] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.077618] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.078657] ata1.00: supports DRM functions and may not be fully accessible [ 1.078669] ata1.00: ATA-10: CT1000MX500SSD1, M3CR043, max UDMA/133 [ 1.078759] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.080308] ata1.00: Features: Trust Dev-Sleep [ 1.080821] ata1.00: supports DRM functions and may not be fully accessible [ 1.082152] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 1.082176] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.082544] ata1.00: configured for UDMA/133 [ 1.082569] ata5.00: ATAPI: PLDS DVD+/-RW DH-16AES, DD12, max UDMA/133 [ 1.084985] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 1.085003] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.085451] ata5.00: configured for UDMA/133 [ 1.093128] scsi 0:0:0:0: Direct-Access ATA CT1000MX500SSD1 043 PQ: 0 ANSI: 5 [ 1.097787] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.098822] ata6.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 1.098839] ata6.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.099743] ata6.00: configured for UDMA/133 [ 1.102672] ata2.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133 [ 1.106613] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.106618] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.106970] hub 1-1:1.0: USB hub found [ 1.107028] hub 1-1:1.0: 4 ports detected [ 1.111799] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.118892] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.118897] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.119231] hub 2-1:1.0: USB hub found [ 1.119299] hub 2-1:1.0: 6 ports detected [ 1.127382] usb 3-3: New USB device found, idVendor=0a05, idProduct=7211, bcdDevice= 1.00 [ 1.127387] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.127389] usb 3-3: Product: USB2.0 HUB [ 1.128135] hub 3-3:1.0: USB hub found [ 1.128233] hub 3-3:1.0: 4 ports detected [ 1.161951] ata2.00: configured for UDMA/133 [ 1.171163] scsi 1:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5 [ 1.175030] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DH-16AES DD12 PQ: 0 ANSI: 5 [ 1.233677] scsi 5:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5 [ 1.245001] sd 1:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.245003] sd 0:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.245006] sd 0:0:0:0: [sdb] 4096-byte physical blocks [ 1.245006] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.245009] sd 5:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.245013] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 1.245015] sd 1:0:0:0: [sda] Write Protect is off [ 1.245016] sd 0:0:0:0: [sdb] Write Protect is off [ 1.245018] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.245019] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.245022] sd 5:0:0:0: [sdc] Write Protect is off [ 1.245025] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.245031] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.245034] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.245040] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.245054] sd 1:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1.245060] sd 0:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 1.245063] sd 5:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 1.246127] tsc: Refined TSC clocksource calibration: 3591.687 MHz [ 1.246133] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a698112, max_idle_ns: 440795324394 ns [ 1.246136] usb 3-9: new high-speed USB device number 3 using xhci_hcd [ 1.247284] clocksource: Switched to clocksource tsc [ 1.266027] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.280596] sdb: sdb1 sdb2 < sdb5 > [ 1.281121] sd 0:0:0:0: [sdb] supports TCG Opal [ 1.281125] sd 0:0:0:0: [sdb] Attached SCSI disk [ 1.339955] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.339964] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.343144] sdc: sdc1 [ 1.343375] sd 5:0:0:0: [sdc] Attached SCSI disk [ 1.393320] usb 3-9: New USB device found, idVendor=0bda, idProduct=0158, bcdDevice=58.88 [ 1.393325] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.393327] usb 3-9: Product: USB2.0-CRW [ 1.393328] usb 3-9: Manufacturer: Generic [ 1.393329] usb 3-9: SerialNumber: 20071114173400000 [ 1.397238] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.407977] usbcore: registered new interface driver usb-storage [ 1.412644] usbcore: registered new interface driver uas [ 1.416518] ums-realtek 3-9:1.0: USB Mass Storage device detected [ 1.419007] scsi host6: usb-storage 3-9:1.0 [ 1.419065] usbcore: registered new interface driver ums-realtek [ 1.518208] usb 3-10: new full-speed USB device number 4 using xhci_hcd [ 1.655778] usb 3-10: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 1.655789] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.854567] PM: Image not found (code -22) [ 1.874160] usb 3-3.1: new full-speed USB device number 5 using xhci_hcd [ 1.975784] usb 3-3.1: New USB device found, idVendor=047f, idProduct=c053, bcdDevice= 2.24 [ 1.975789] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.975790] usb 3-3.1: Product: Plantronics Blackwire 5220 Series [ 1.975791] usb 3-3.1: Manufacturer: Plantronics [ 1.975792] usb 3-3.1: SerialNumber: 6C484C55D8284058B705A889656D526C [ 1.983545] EXT4-fs (sdb1): mounted filesystem 755218a3-0198-49ec-8520-ba23371546cf ro with ordered data mode. Quota mode: none. [ 1.993230] hid: raw HID events driver (C) Jiri Kosina [ 2.006332] usbcore: registered new interface driver usbhid [ 2.006335] usbhid: USB HID core driver [ 2.014126] input: Plantronics Plantronics Blackwire 5220 Series as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.3/0003:047F:C053.0001/input/input2 [ 2.050232] usb 3-3.2: new full-speed USB device number 6 using xhci_hcd [ 2.070419] plantronics 0003:047F:C053.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Plantronics Plantronics Blackwire 5220 Series] on usb-0000:00:14.0-3.1/input3 [ 2.117162] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 2.140759] usb 3-3.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03 [ 2.140764] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.140765] usb 3-3.2: Product: USB Receiver [ 2.140766] usb 3-3.2: Manufacturer: Logitech [ 2.143404] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:046D:C52B.0002/input/input3 [ 2.205824] systemd[1]: Inserted module 'autofs4' [ 2.228162] systemd[1]: systemd 257.9-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE) [ 2.228168] systemd[1]: Detected architecture x86-64. [ 2.229977] systemd[1]: Hostname set to <inspiron>. [ 2.330190] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input0 [ 2.332068] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/0003:046D:C52B.0003/input/input4 [ 2.332145] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/0003:046D:C52B.0003/input/input5 [ 2.375232] systemd[1]: bpf-restrict-fs: LSM BPF program attached [ 2.385924] systemd-fstab-generator[343]: Checking was requested for "//freebox_server/freebox", but it is not a device. [ 2.386174] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/0003:046D:C52B.0003/input/input6 [ 2.386302] hid-generic 0003:046D:C52B.0003: input,hiddev1,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input1 [ 2.387810] hid-generic 0003:046D:C52B.0004: hiddev2,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input2 [ 2.400120] systemd-sysv-generator[351]: SysV service '/etc/init.d/pulseaudio-enable-autospawn' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 2.400124] systemd-sysv-generator[351]: Please update package to include a native systemd unit file. [ 2.400126] systemd-sysv-generator[351]: ! This compatibility logic is deprecated, expect removal soon. ! [ 2.432364] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 2.434518] sd 6:0:0:0: [sdd] Media removed, stopped polling [ 2.434736] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 2.462140] usb 3-3.4: new low-speed USB device number 7 using xhci_hcd [ 2.508573] systemd[1]: Queued start job for default target graphical.target. [ 2.552021] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 2.552412] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 2.552662] systemd[1]: Created slice user.slice - User and Session Slice. [ 2.552717] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 2.552865] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 2.552885] systemd[1]: Expecting device dev-disk-by\x2duuid-3537011f\x2d7da9\x2d4cf1\x2da312\x2d0d6df0eb6e8a.device - /dev/disk/by-uuid/3537011f-7da9-4cf1-a312-0d6df0eb6e8a... [ 2.552891] systemd[1]: Expecting device dev-disk-by\x2duuid-8a83c48e\x2dbf83\x2d4633\x2d8785\x2d200c49e9dc28.device - /dev/disk/by-uuid/8a83c48e-bf83-4633-8785-200c49e9dc28... [ 2.552920] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 2.552932] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 2.552940] systemd[1]: Reached target slices.target - Slice Units. [ 2.553053] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 2.553708] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 2.553766] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 2.553826] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 2.553901] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 2.553917] usb 3-3.4: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00 [ 2.553920] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.553921] usb 3-3.4: Product: Dell MS116 USB Optical Mouse [ 2.553922] usb 3-3.4: Manufacturer: PixArt [ 2.553923] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.553936] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.554000] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 2.554046] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 2.554880] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 2.555507] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 2.556131] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... [ 2.556176] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/0003:413C:301A.0005/input/input8 [ 2.556254] hid-generic 0003:413C:301A.0005: input,hidraw4: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-3.4/input0 [ 2.556765] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 2.557681] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 2.559082] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 2.560674] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 2.561683] systemd[1]: Starting [email protected] - Load Kernel Module configfs... [ 2.563441] systemd[1]: Starting [email protected] - Load Kernel Module drm... [ 2.564215] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 2.565255] systemd[1]: Starting [email protected] - Load Kernel Module fuse... [ 2.565416] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 2.565455] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 2.567426] systemd[1]: Starting systemd-journald.service - Journal Service... [ 2.569482] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 2.569505] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.571774] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 2.571834] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.572918] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 2.573933] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 2.576113] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 2.576268] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 2.576402] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock. [ 2.576509] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 2.576616] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 2.576928] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 2.577306] systemd[1]: [email protected]: Deactivated successfully. [ 2.577510] systemd[1]: Finished [email protected] - Load Kernel Module fuse. [ 2.578708] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 2.580418] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 2.582100] systemd[1]: [email protected]: Deactivated successfully. [ 2.582330] systemd[1]: Finished [email protected] - Load Kernel Module configfs. [ 2.582675] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 2.582872] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 2.583924] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 2.588216] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 2.590028] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. [ 2.591585] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 2.595803] systemd-journald[366]: Collecting audit messages is disabled. [ 2.604456] lp: driver loaded but no devices found [ 2.606050] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 2.608037] EXT4-fs (sdb1): re-mounted 755218a3-0198-49ec-8520-ba23371546cf r/w. [ 2.609213] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 2.609564] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 2.609614] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 2.610189] ppdev: user-space parallel port driver [ 2.610731] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 2.610781] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 2.612385] systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization... [ 2.613331] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 2.613349] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.627240] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed. [ 2.632634] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 2.633139] ACPI: bus type drm_connector registered [ 2.634171] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... [ 2.634573] systemd[1]: [email protected]: Deactivated successfully. [ 2.634807] systemd[1]: Finished [email protected] - Load Kernel Module drm. [ 2.642902] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 2.643016] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ 2.643297] systemd[1]: Set up automount media-freebox.automount. [ 2.660680] systemd[1]: Started systemd-timesyncd.service - Network Time Synchronization. [ 2.660850] systemd[1]: Reached target time-set.target - System Time Set. [ 2.665595] IPMI message handler: version 39.2 [ 2.669226] ipmi device interface [ 2.691742] systemd[1]: Started systemd-journald.service - Journal Service. [ 2.731008] systemd-journald[366]: Received client request to flush runtime journal. [ 2.801362] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.801450] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.801486] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 2.801511] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2.801531] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 2.933613] Adding 999420k swap on /dev/sdb5. Priority:-2 extents:1 across:999420k SS [ 2.950363] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 2.964367] at24 0-0050: supply vcc not found, using dummy regulator [ 2.973499] at24 0-0050: 256 byte spd EEPROM, read-only [ 2.986538] mc: Linux media interface: v0.10 [ 2.998549] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 2.998552] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.998553] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.998553] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.006215] cryptd: max_cpu_qlen set to 1000 [ 3.055221] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 3.067350] AES CTR mode by8 optimization enabled [ 3.093034] snd_hda_intel 0000:01:00.1: Disabling MSI [ 3.093043] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 3.115819] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 3.130193] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 3.130197] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.130199] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.130200] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 3.130201] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 3.130202] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x18 [ 3.130204] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x19 [ 3.130205] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 3.140588] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 3.186575] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 3.187450] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 3.187536] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 3.189627] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 3.334788] Bluetooth: Core ver 2.22 [ 3.334810] NET: Registered PF_BLUETOOTH protocol family [ 3.334811] Bluetooth: HCI device and connection manager initialized [ 3.334815] Bluetooth: HCI socket layer initialized [ 3.334818] Bluetooth: L2CAP socket layer initialized [ 3.334822] Bluetooth: SCO socket layer initialized [ 3.335327] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.343615] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 3.343755] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 3.343888] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.344020] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.364110] intel_rapl_common: Found RAPL domain package [ 3.364113] intel_rapl_common: Found RAPL domain core [ 3.364114] intel_rapl_common: Found RAPL domain dram [ 3.364118] intel_rapl_common: package-0:package:long_term locked by BIOS [ 3.364120] intel_rapl_common: package-0:package:short_term locked by BIOS [ 3.371739] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 3.373022] usbcore: registered new interface driver btusb [ 3.382790] usb 3-10: USB disconnect, device number 4 [ 3.383266] usbcore: registered new interface driver ath3k [ 3.493257] ath: phy0: WB335 1-ANT card detected [ 3.493261] ath: phy0: Set BT/WLAN RX diversity capability [ 3.502776] ath: phy0: Enable LNA combining [ 3.504012] ath: phy0: ASPM enabled: 0x43 [ 3.504014] ath: EEPROM regdomain: 0x60 [ 3.504014] ath: EEPROM indicates we should expect a direct regpair map [ 3.504015] ath: Country alpha2 being used: 00 [ 3.504016] ath: Regpair used: 0x60 [ 3.504576] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 3.569342] nvidia: loading out-of-tree module taints kernel. [ 3.569349] nvidia: module license 'NVIDIA' taints kernel. [ 3.569351] Disabling lock debugging due to kernel taint [ 3.569352] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 3.569353] nvidia: module license taints kernel. [ 3.594982] logitech-djreceiver 0003:046D:C52B.0004: hiddev1,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input2 [ 3.610163] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0x00000000c8a428a2, irq=16 [ 3.615929] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0 [ 3.637525] audit: type=1400 audit(1767702324.713:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=639 comm="apparmor_parser" [ 3.637554] audit: type=1400 audit(1767702324.713:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=644 comm="apparmor_parser" [ 3.637582] audit: type=1400 audit(1767702324.713:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=640 comm="apparmor_parser" [ 3.637628] audit: type=1400 audit(1767702324.713:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=641 comm="apparmor_parser" [ 3.637829] audit: type=1400 audit(1767702324.713:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=646 comm="apparmor_parser" [ 3.638022] audit: type=1400 audit(1767702324.713:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=645 comm="apparmor_parser" [ 3.638472] audit: type=1400 audit(1767702324.717:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=642 comm="apparmor_parser" [ 3.639137] audit: type=1400 audit(1767702324.717:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=647 comm="apparmor_parser" [ 3.639140] audit: type=1400 audit(1767702324.717:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=648 comm="apparmor_parser" [ 3.670145] usb 3-10: new full-speed USB device number 8 using xhci_hcd [ 3.708493] input: Logitech Wireless Device PID:4031 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.2/0003:046D:C52B.0004/0003:046D:4031.0006/input/input17 [ 3.708844] hid-generic 0003:046D:4031.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Device PID:4031] on usb-0000:00:14.0-3.2/input2:1 [ 3.710545] input: Logitech Wireless Device PID:2011 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.2/0003:046D:C52B.0004/0003:046D:2011.0007/input/input21 [ 3.791782] nvidia: unknown parameter 'NVreg_PreserveVideoMemoryAllocations' ignored [ 3.792525] nvidia-nvlink: Nvlink Core is being initialized, major device number 240 [ 3.792819] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem [ 3.792889] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.157 Wed Oct 12 09:19:07 UTC 2022 (using threaded interrupts) [ 3.854257] hid-generic 0003:046D:2011.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:2011] on usb-0000:00:14.0-3.2/input2:2 [ 3.942212] input: Logitech M310/M310t as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.2/0003:046D:C52B.0004/0003:046D:4031.0006/input/input25 [ 3.942290] logitech-hidpp-device 0003:046D:4031.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-0000:00:14.0-3.2/input2:1 [ 4.174286] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.2/0003:046D:C52B.0004/0003:046D:2011.0007/input/input26 [ 4.290288] logitech-hidpp-device 0003:046D:2011.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-3.2/input2:2 [ 4.563504] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.157 Wed Oct 12 09:15:25 UTC 2022 [ 4.634155] usb 3-3.1: Warning! Unlikely big volume range (=1024), cval->res is probably wrong. [ 4.634160] usb 3-3.1: [6] FU [Headset Capture Volume] ch = 1, val = -512/512/1 [ 4.634597] usbcore: registered new interface driver snd-usb-audio [ 5.332576] nvidia_drm: unknown parameter 'fbdev' ignored [ 5.332796] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 5.349415] resource: resource sanity check: requesting [mem 0x00000000000e0000-0x00000000000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000e7fff window] [ 5.349419] caller _nv027866rm+0x58/0x90 [nvidia] mapping multiple BARs [ 5.655716] resource: resource sanity check: requesting [mem 0x00000000000c0000-0x00000000000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000e7fff window] [ 5.655719] caller _nv001015rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs [ 6.140123] [drm] Initialized nvidia-drm 0.0.0 for 0000:01:00.0 on minor 0 [ 6.443194] NET: Registered PF_QIPCRTR protocol family [ 6.534142] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC) [ 6.718560] r8169 0000:04:00.0 enp4s0: Link is Down [ 6.833212] kauditd_printk_skb: 120 callbacks suppressed [ 6.833216] audit: type=1400 audit(1767702327.909:131): apparmor="DENIED" operation="open" class="file" profile="/usr/sbin/cupsd" name="/etc/paperspecs" pid=1277 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 6.988809] evm: overlay not supported [ 7.298605] traps: gdm3[1436] trap int3 ip:7fc194bb421a sp:7ffdf3e27570 error:0 in libglib-2.0.so.0.8400.4[6721a,7fc194b6c000+a1000] [ 7.684810] audit: type=1400 audit(1767702328.761:132): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=1277 comm="cupsd" capability=12 capname="net_admin" [ 8.061130] wlp5s0: authenticate with 70:fc:8f:9b:45:31 (local address=18:4f:32:3a:9b:f9) [ 8.061135] wlp5s0: send auth to 70:fc:8f:9b:45:31 (try 1/3) [ 8.065681] wlp5s0: authenticated [ 8.066133] wlp5s0: associate with 70:fc:8f:9b:45:31 (try 1/3) [ 8.070233] wlp5s0: RX AssocResp from 70:fc:8f:9b:45:31 (capab=0x1411 status=0 aid=2) [ 8.070381] wlp5s0: associated [ 8.399324] traps: gdm3[3877] trap int3 ip:7f652a5c721a sp:7ffdd20525b0 error:0 in libglib-2.0.so.0.8400.4[6721a,7f652a57f000+a1000] [ 8.871666] usb 3-10: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 8.871685] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.006578] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.006582] Bluetooth: BNEP filters: protocol multicast [ 9.006584] Bluetooth: BNEP socket layer initialized [ 9.008004] Bluetooth: MGMT ver 1.23 [ 9.013948] NET: Registered PF_ALG protocol family [ 9.043346] Bluetooth: RFCOMM TTY layer initialized [ 9.043352] Bluetooth: RFCOMM socket layer initialized [ 9.043356] Bluetooth: RFCOMM ver 1.11 [ 9.511466] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 9.789523] traps: gdm3[4536] trap int3 ip:7fae1cc6c21a sp:7fffae8154e0 error:0 in libglib-2.0.so.0.8400.4[6721a,7fae1cc24000+a1000] [ 10.186398] audit: type=1400 audit(1767702331.265:133): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=4594 comm="apparmor_parser" [ 11.052501] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 11.056892] Bridge firewalling registered [ 11.135819] wlp5s0: authenticate with 70:fc:8f:9b:45:31 (local address=18:4f:32:3a:9b:f9) [ 11.135824] wlp5s0: send auth to 70:fc:8f:9b:45:31 (try 1/3) [ 11.141449] wlp5s0: authenticated [ 11.146219] wlp5s0: associate with 70:fc:8f:9b:45:31 (try 1/3) [ 11.151280] wlp5s0: RX AssocResp from 70:fc:8f:9b:45:31 (capab=0x1411 status=0 aid=2) [ 11.151418] wlp5s0: associated [ 11.166966] Initializing XFRM netlink socket [ 11.175387] traps: gdm3[4753] trap int3 ip:7fdb9f9b921a sp:7ffcbd306b00 error:0 in libglib-2.0.so.0.8400.4[6721a,7fdb9f971000+a1000] [ 12.582986] traps: gdm3[4916] trap int3 ip:7f89d460221a sp:7fff7699ddf0 error:0 in libglib-2.0.so.0.8400.4[6721a,7f89d45ba000+a1000] [ 22.784285] logitech-hidpp-device 0003:046D:2011.0007: HID++ 1.0 device connected.
