Attached are the files I was talking about.
Am 06.07.25 um 17:22 schrieb Sascha Wuestemann:
Package: bugs.debian.org
Severity: grave
Justification: renders package unusable
X-Debbugs-Cc: bigf...@killerhippy.de, bigf...@killerhippy.de
I use rear, relax and recover from git: https://github.com/rear/rear
with 2 other, younger computers. On my old, an Dell Optiplex 7010 I
can't use rear, because it cannot format an 5G HDD enclosure
connected via usb using the build in usb-2.0 ports.
sascha@uranus:~/git/rear$ time sudo ./usr/sbin/rear format /dev/sdd
USB or disk device /dev/sdd is not formatted with ext2/3/4 or btrfs filesystem
Formatting /dev/sdd will remove all currently existing data on that whole device
Type exactly 'Yes' to format /dev/sdd with ext3 filesystem
(default 'No' timeout 300 seconds)
Yes
ERROR: Failed to create ext3 filesystem on ReaR data partition /dev/sdd3
Some latest log messages since the last called script 300_format_usb_disk.sh:
2025-07-06 11:58:53.828037465 Setting 'bios_grub' flag on BIOS boot
partition /dev/sdd1
2025-07-06 11:58:54.035346197 Making an EFI bootable device /dev/sdd
2025-07-06 11:58:54.039567964 Creating EFI system partition 2 on device
/dev/sdd with size 1024 MiB aligned at 8 MiB
2025-07-06 11:58:54.240233325 Setting 'esp' flag on EFI partition 2 on
device /dev/sdd
2025-07-06 11:58:54.468633594 Creating ReaR data partition 3 on /dev/sdd up
to 100% of /dev/sdd
2025-07-06 11:58:54.890114726 Setting 'legacy_boot' flag on ReaR data
partition 3 on device /dev/sdd
2025-07-06 11:59:00.344023960 Creating vfat filesystem on EFI system
partition on /dev/sdd2
2025-07-06 11:59:00.612236321 Creating ext3 filesystem with label 'REAR-000'
on ReaR data partition /dev/sdd3
Some messages from /var/tmp/rear.AnWeQjZuDF3AWVt/tmp/rear.format.stdout_stderr
since the last called script 300_format_usb_disk.sh:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000, 214990848, 512000000, 550731776, 644972544
Allocating group tables: done
Writing inode tables: 583/37253
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: mkfs.ext3:
Input/output error while writing out and closing file system
Use debug mode '-d' for some debug messages or debugscript mode '-D' for full
debug messages with 'set -x' output
Aborting due to an error, check
/home/sascha/git/rear/var/log/rear/rear-uranus.log for details
Beendet
real 283m16,167s
The problem is not rear but the xhci host croller, see attached files
dmesg.6.1.0-35-amd64-2025-07-06.txt
rear-uranus.log
When xhci dies, my usb mouse is dead, too. I can rmmod and modprobe xhci
to get the mouse back but the rear problem persists. Not so at the other
computers that have usb-3.0 or usb-c to connect such an usb enclosure.
I am pretty shure, that this is a kernel bug. Please help me to get this
problem solved.
debian_version 12.11
Greetings from Wolfenbuettel,
Sascha
[ 0.000000] microcode: microcode updated early to revision 0x21, date =
2019-02-13
[ 0.000000] Linux version 6.1.0-35-amd64 (debian-ker...@lists.debian.org)
(gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian)
2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.137-1 (2025-05-07)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-35-amd64
root=UUID=594a11db-407f-48ae-8a29-229995f07a57 ro quiet splash
nvidia-drm.modeset=1 iommu=soft usbcore.autosuspend=-1 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d5b83fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d5b84000-0x00000000d5bc6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d5bc7000-0x00000000db709fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db70a000-0x00000000db7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000dbf55fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbf56000-0x00000000dbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dc000000-0x00000000dc7b3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dc7b4000-0x00000000dc7fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dc800000-0x00000000ddf1efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddf1f000-0x00000000ddffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000df610fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df611000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xd36d3018-0xd36f7657] usable ==> usable
[ 0.000000] e820: update [mem 0xd36d3018-0xd36f7657] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009cfff]
usable
[ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009efff]
reserved
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff]
usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000d36d3017]
usable
[ 0.000000] reserve setup_data: [mem 0x00000000d36d3018-0x00000000d36f7657]
usable
[ 0.000000] reserve setup_data: [mem 0x00000000d36f7658-0x00000000d5b83fff]
usable
[ 0.000000] reserve setup_data: [mem 0x00000000d5b84000-0x00000000d5bc6fff]
ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000d5bc7000-0x00000000db709fff]
usable
[ 0.000000] reserve setup_data: [mem 0x00000000db70a000-0x00000000db7fffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000db800000-0x00000000dbf55fff]
usable
[ 0.000000] reserve setup_data: [mem 0x00000000dbf56000-0x00000000dbffffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dc000000-0x00000000dc7b3fff]
usable
[ 0.000000] reserve setup_data: [mem 0x00000000dc7b4000-0x00000000dc7fffff]
ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000dc800000-0x00000000ddf1efff]
usable
[ 0.000000] reserve setup_data: [mem 0x00000000ddf1f000-0x00000000ddffffff]
ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000de000000-0x00000000df610fff]
usable
[ 0.000000] reserve setup_data: [mem 0x00000000df611000-0x00000000df7fffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000031dffffff]
usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xdc7f4000 ACPI 2.0=0xdc7f4000 SMBIOS=0xf0000
MOKvar=0xdb746000
[ 0.000000] Kernel is locked down from EFI Secure Boot; see man
kernel_lockdown.7
[ 0.000000] secureboot: Secure boot enabled
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 7010/0KRC95, BIOS A29 06/28/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3192.803 MHz processor
[ 0.000067] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000069] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000078] last_pfn = 0x31e000 max_arch_pfn = 0x400000000
[ 0.000172] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000596] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000602] last_pfn = 0xdf611 max_arch_pfn = 0x400000000
[ 0.012103] RAMDISK: [mem 0x3bf7a000-0x3fffafff]
[ 0.012109] ACPI: Early table checksum verification disabled
[ 0.012111] ACPI: RSDP 0x00000000DC7F4000 000024 (v02 DELL )
[ 0.012115] ACPI: XSDT 0x00000000DC7F4080 00007C (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.012121] ACPI: FACP 0x00000000DC7FE260 00010C (v05 DELL CBX3
01072009 AMI 00010013)
[ 0.012126] ACPI: DSDT 0x00000000DC7F4188 00A0D6 (v02 DELL CBX3
00000022 INTL 20091112)
[ 0.012129] ACPI: FACS 0x00000000DDFFE080 000040
[ 0.012131] ACPI: APIC 0x00000000DC7FE370 000072 (v03 DELL CBX3
01072009 AMI 00010013)
[ 0.012134] ACPI: FPDT 0x00000000DC7FE3E8 000044 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.012137] ACPI: MCFG 0x00000000DC7FE430 00003C (v01 DELL CBX3
01072009 MSFT 00000097)
[ 0.012140] ACPI: HPET 0x00000000DC7FE470 000038 (v01 DELL CBX3
01072009 AMI. 00000005)
[ 0.012143] ACPI: SSDT 0x00000000DC7FE4A8 000415 (v01 SataRe SataTabl
00001000 INTL 20091112)
[ 0.012146] ACPI: SSDT 0x00000000DC7FE8C0 0009B9 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.012149] ACPI: SSDT 0x00000000DC7FF280 000B22 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 0.012152] ACPI: DMAR 0x00000000DC7FFDA8 000080 (v01 INTEL SNB
00000001 INTL 00000001)
[ 0.012155] ACPI: ASF! 0x00000000DC7FFE28 0000A5 (v32 INTEL HCG
00000001 TFSM 000F4240)
[ 0.012158] ACPI: BGRT 0x00000000DC7FFED0 000038 (v00 "?d??
01072009 AMI 00010013)
[ 0.012160] ACPI: Reserving FACP table memory at [mem 0xdc7fe260-0xdc7fe36b]
[ 0.012162] ACPI: Reserving DSDT table memory at [mem 0xdc7f4188-0xdc7fe25d]
[ 0.012162] ACPI: Reserving FACS table memory at [mem 0xddffe080-0xddffe0bf]
[ 0.012163] ACPI: Reserving APIC table memory at [mem 0xdc7fe370-0xdc7fe3e1]
[ 0.012164] ACPI: Reserving FPDT table memory at [mem 0xdc7fe3e8-0xdc7fe42b]
[ 0.012165] ACPI: Reserving MCFG table memory at [mem 0xdc7fe430-0xdc7fe46b]
[ 0.012166] ACPI: Reserving HPET table memory at [mem 0xdc7fe470-0xdc7fe4a7]
[ 0.012167] ACPI: Reserving SSDT table memory at [mem 0xdc7fe4a8-0xdc7fe8bc]
[ 0.012167] ACPI: Reserving SSDT table memory at [mem 0xdc7fe8c0-0xdc7ff278]
[ 0.012168] ACPI: Reserving SSDT table memory at [mem 0xdc7ff280-0xdc7ffda1]
[ 0.012169] ACPI: Reserving DMAR table memory at [mem 0xdc7ffda8-0xdc7ffe27]
[ 0.012170] ACPI: Reserving ASF! table memory at [mem 0xdc7ffe28-0xdc7ffecc]
[ 0.012171] ACPI: Reserving BGRT table memory at [mem 0xdc7ffed0-0xdc7fff07]
[ 0.012227] No NUMA configuration found
[ 0.012228] Faking a node at [mem 0x0000000000000000-0x000000031dffffff]
[ 0.012237] NODE_DATA(0) allocated [mem 0x31dfce000-0x31dff8fff]
[ 0.012540] Zone ranges:
[ 0.012541] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012542] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012544] Normal [mem 0x0000000100000000-0x000000031dffffff]
[ 0.012545] Device empty
[ 0.012546] Movable zone start for each node
[ 0.012548] Early memory node ranges
[ 0.012549] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.012550] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.012551] node 0: [mem 0x0000000000100000-0x00000000d5b83fff]
[ 0.012552] node 0: [mem 0x00000000d5bc7000-0x00000000db709fff]
[ 0.012553] node 0: [mem 0x00000000db800000-0x00000000dbf55fff]
[ 0.012554] node 0: [mem 0x00000000dc000000-0x00000000dc7b3fff]
[ 0.012554] node 0: [mem 0x00000000dc800000-0x00000000ddf1efff]
[ 0.012555] node 0: [mem 0x00000000de000000-0x00000000df610fff]
[ 0.012556] node 0: [mem 0x0000000100000000-0x000000031dffffff]
[ 0.012558] Initmem setup node 0 [mem 0x0000000000001000-0x000000031dffffff]
[ 0.012563] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.012564] On node 0, zone DMA: 2 pages in unavailable ranges
[ 0.012596] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.019954] On node 0, zone DMA32: 67 pages in unavailable ranges
[ 0.019978] On node 0, zone DMA32: 246 pages in unavailable ranges
[ 0.019998] On node 0, zone DMA32: 170 pages in unavailable ranges
[ 0.020049] On node 0, zone DMA32: 76 pages in unavailable ranges
[ 0.020100] On node 0, zone DMA32: 225 pages in unavailable ranges
[ 0.020415] On node 0, zone Normal: 2543 pages in unavailable ranges
[ 0.020536] On node 0, zone Normal: 8192 pages in unavailable ranges
[ 0.020638] ACPI: PM-Timer IO Port: 0x408
[ 0.020645] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.020656] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.020659] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.020661] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.020665] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.020666] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.020674] e820: update [mem 0xd4308000-0xd438ffff] usable ==> reserved
[ 0.020688] TSC deadline timer available
[ 0.020689] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.020709] PM: hibernation: Registered nosave memory: [mem
0x00000000-0x00000fff]
[ 0.020711] PM: hibernation: Registered nosave memory: [mem
0x0009d000-0x0009efff]
[ 0.020713] PM: hibernation: Registered nosave memory: [mem
0x000a0000-0x000fffff]
[ 0.020714] PM: hibernation: Registered nosave memory: [mem
0xd4308000-0xd438ffff]
[ 0.020716] PM: hibernation: Registered nosave memory: [mem
0xd5b84000-0xd5bc6fff]
[ 0.020718] PM: hibernation: Registered nosave memory: [mem
0xdb70a000-0xdb7fffff]
[ 0.020719] PM: hibernation: Registered nosave memory: [mem
0xdbf56000-0xdbffffff]
[ 0.020721] PM: hibernation: Registered nosave memory: [mem
0xdc7b4000-0xdc7fffff]
[ 0.020723] PM: hibernation: Registered nosave memory: [mem
0xddf1f000-0xddffffff]
[ 0.020724] PM: hibernation: Registered nosave memory: [mem
0xdf611000-0xffffffff]
[ 0.020726] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.020727] Booting paravirtualized kernel on bare hardware
[ 0.020729] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.024913] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4
nr_node_ids:1
[ 0.025105] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[ 0.025112] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[ 0.025114] pcpu-alloc: [0] 0 1 2 3
[ 0.025143] Fallback order for Node 0: 0
[ 0.025146] Built 1 zonelists, mobility grouping on. Total pages: 3084980
[ 0.025147] Policy zone: Normal
[ 0.025148] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-35-amd64
root=UUID=594a11db-407f-48ae-8a29-229995f07a57 ro quiet splash
nvidia-drm.modeset=1 iommu=soft usbcore.autosuspend=-1 quiet
[ 0.025268] Unknown kernel command line parameters "splash
BOOT_IMAGE=/vmlinuz-6.1.0-35-amd64", will be passed to user space.
[ 0.025276] random: crng init done
[ 0.026084] Dentry cache hash table entries: 2097152 (order: 12, 16777216
bytes, linear)
[ 0.026494] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes, linear)
[ 0.026546] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.026552] software IO TLB: area num 4.
[ 0.053436] Memory: 3554264K/12536440K available (14342K kernel code, 2339K
rwdata, 9096K rodata, 2800K init, 17380K bss, 509384K reserved, 0K cma-reserved)
[ 0.053562] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.053575] Kernel/User page tables isolation: enabled
[ 0.053609] ftrace: allocating 40336 entries in 158 pages
[ 0.059931] ftrace: allocated 158 pages with 5 groups
[ 0.060550] Dynamic Preempt: voluntary
[ 0.060576] rcu: Preemptible hierarchical RCU implementation.
[ 0.060577] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.060578] Trampoline variant of Tasks RCU enabled.
[ 0.060579] Rude variant of Tasks RCU enabled.
[ 0.060579] Tracing variant of Tasks RCU enabled.
[ 0.060580] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.060581] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.065246] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.065426] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.065498] Console: colour dummy device 80x25
[ 0.065517] printk: console [tty0] enabled
[ 0.065533] ACPI: Core revision 20220331
[ 0.065606] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484882848 ns
[ 0.065621] APIC: Switch to symmetric I/O mode setup
[ 0.065623] DMAR: Host address width 36
[ 0.065624] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.065630] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262
ecap f0105a
[ 0.065632] DMAR: RMRR base: 0x000000df777000 end: 0x000000df79dfff
[ 0.065635] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.065636] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.065638] DMAR-IR: Queued invalidation will be enabled to support x2apic
and Intr-remapping.
[ 0.065964] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.065966] x2apic enabled
[ 0.065972] Switched APIC routing to cluster x2apic.
[ 0.066410] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085623] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
0x2e05bb8c4cb, max_idle_ns: 440795334591 ns
[ 0.085628] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6385.60 BogoMIPS (lpj=12771212)
[ 0.085651] CPU0: Thermal monitoring enabled (TM1)
[ 0.085669] process: using mwait in idle threads
[ 0.085672] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.085673] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.085676] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user
pointer sanitization
[ 0.085678] Spectre V2 : Mitigation: Retpolines
[ 0.085679] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context
switch and VMEXIT
[ 0.085680] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.085681] Spectre V2 : mitigation: Enabling conditional Indirect Branch
Prediction Barrier
[ 0.085683] Speculative Store Bypass: Mitigation: Speculative Store Bypass
disabled via prctl
[ 0.085684] MDS: Mitigation: Clear CPU buffers
[ 0.085685] MMIO Stale Data: Unknown: No mitigations
[ 0.085686] SRBDS: Vulnerable: No microcode
[ 0.085690] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.085692] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.085693] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.085694] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.085695] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,
using 'standard' format.
[ 0.098266] Freeing SMP alternatives memory: 36K
[ 0.098269] pid_max: default: 32768 minimum: 301
[ 0.100989] LSM: Security Framework initializing
[ 0.101001] landlock: Up and running.
[ 0.101002] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.101022] AppArmor: AppArmor initialized
[ 0.101024] TOMOYO Linux initialized
[ 0.101029] LSM support for eBPF active
[ 0.101060] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes,
linear)
[ 0.101076] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
bytes, linear)
[ 0.101448] smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (family:
0x6, model: 0x3a, stepping: 0x9)
[ 0.101562] cblist_init_generic: Setting adjustable number of callback
queues.
[ 0.101563] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.101579] cblist_init_generic: Setting adjustable number of callback
queues.
[ 0.101580] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.101592] cblist_init_generic: Setting adjustable number of callback
queues.
[ 0.101593] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.101604] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR,
full-width counters, Intel PMU driver.
[ 0.101621] ... version: 3
[ 0.101622] ... bit width: 48
[ 0.101623] ... generic registers: 8
[ 0.101623] ... value mask: 0000ffffffffffff
[ 0.101624] ... max period: 00007fffffffffff
[ 0.101625] ... fixed-purpose events: 3
[ 0.101625] ... event mask: 00000007000000ff
[ 0.101626] signal: max sigframe size: 1776
[ 0.101626] Estimated ratio of average max frequency by base frequency
(times 1024): 1088
[ 0.101626] rcu: Hierarchical SRCU implementation.
[ 0.101626] rcu: Max phase no-delay instances is 1000.
[ 0.101626] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.101626] smp: Bringing up secondary CPUs ...
[ 0.101626] x86: Booting SMP configuration:
[ 0.101626] .... node #0, CPUs: #1 #2 #3
[ 0.105684] smp: Brought up 1 node, 4 CPUs
[ 0.105684] smpboot: Max logical packages: 1
[ 0.105684] smpboot: Total of 4 processors activated (25542.42 BogoMIPS)
[ 0.121643] node 0 deferred pages initialised in 16ms
[ 0.122571] devtmpfs: initialized
[ 0.122571] x86/mm: Memory block size: 128MB
[ 0.122571] ACPI: PM: Registering ACPI NVS region [mem
0xd5b84000-0xd5bc6fff] (274432 bytes)
[ 0.122571] ACPI: PM: Registering ACPI NVS region [mem
0xddf1f000-0xddffffff] (921600 bytes)
[ 0.122571] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.122571] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.122571] pinctrl core: initialized pinctrl subsystem
[ 0.122571] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.122571] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.122571] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic
allocations
[ 0.122685] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic
allocations
[ 0.122701] audit: initializing netlink subsys (disabled)
[ 0.122717] audit: type=2000 audit(1751795231.056:1): state=initialized
audit_enabled=0 res=1
[ 0.122717] thermal_sys: Registered thermal governor 'fair_share'
[ 0.122717] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.122717] thermal_sys: Registered thermal governor 'step_wise'
[ 0.122717] thermal_sys: Registered thermal governor 'user_space'
[ 0.122717] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.122717] cpuidle: using governor ladder
[ 0.122717] cpuidle: using governor menu
[ 0.122717] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.122717] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.122717] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.122717] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.122717] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a
huge-page mapping due to MTRR override.
[ 0.122717] PCI: Using configuration type 1 for base access
[ 0.125636] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.125730] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.126381] kprobes: kprobe jump-optimization is enabled. All kprobes are
optimized if possible.
[ 0.126386] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.126386] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.126411] ACPI: Added _OSI(Module Device)
[ 0.126411] ACPI: Added _OSI(Processor Device)
[ 0.126411] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.126411] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.131594] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.132490] ACPI: Dynamic OEM Table Load:
[ 0.132496] ACPI: SSDT 0xFFFF8C1C40121000 00083B (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.132918] ACPI: Dynamic OEM Table Load:
[ 0.132922] ACPI: SSDT 0xFFFF8C1C40809400 000303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.133247] ACPI: Dynamic OEM Table Load:
[ 0.133250] ACPI: SSDT 0xFFFF8C1C57DAC600 000119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.133948] ACPI: Interpreter enabled
[ 0.133965] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.133966] ACPI: Using IOAPIC for interrupt routing
[ 0.133985] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.133986] PCI: Using E820 reservations for host bridge windows
[ 0.134122] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.140373] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.140379] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI HPX-Type3]
[ 0.140494] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug
SHPCHotplug PME]
[ 0.140588] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.140590] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS
configuration
[ 0.141006] PCI host bridge to bus 0000:00
[ 0.141009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.141011] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.141013] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff
window]
[ 0.141014] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff
window]
[ 0.141016] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.141032] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.141093] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.141124] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.141223] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.141241] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
[ 0.141307] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.141381] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.141401] pci 0000:00:16.0: reg 0x10: [mem 0xf713c000-0xf713c00f 64bit]
[ 0.141472] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.141524] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 0.141538] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
[ 0.141544] pci 0000:00:16.3: reg 0x14: [mem 0xf713a000-0xf713afff]
[ 0.141651] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.141664] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.141672] pci 0000:00:19.0: reg 0x14: [mem 0xf7139000-0xf7139fff]
[ 0.141680] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.141736] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.141805] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.141820] pci 0000:00:1a.0: reg 0x10: [mem 0xf7138000-0xf71383ff]
[ 0.141900] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.141974] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.141991] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
[ 0.142064] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.142155] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.142170] pci 0000:00:1d.0: reg 0x10: [mem 0xf7137000-0xf71373ff]
[ 0.142250] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.142326] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.142438] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100
[ 0.142611] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.142624] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.142631] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.142639] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.142646] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.142653] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.142660] pci 0000:00:1f.2: reg 0x24: [mem 0xf7136000-0xf71367ff]
[ 0.142699] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.142763] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.142780] pci 0000:00:1f.3: reg 0x10: [mem 0xf7135000-0xf71350ff 64bit]
[ 0.142799] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.142901] pci 0000:01:00.0: [10de:2504] type 00 class 0x030000
[ 0.142920] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.142935] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit
pref]
[ 0.142951] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit
pref]
[ 0.142961] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.142971] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.142979] pci 0000:01:00.0: enabling Extended Tags
[ 0.142995] pci 0000:01:00.0: BAR 1: assigned to efifb
[ 0.143000] pci 0000:01:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.143050] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.143096] pci 0000:01:00.0: 126.016 Gb/s available PCIe bandwidth, limited
by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0
GT/s PCIe x16 link)
[ 0.143170] pci 0000:01:00.1: [10de:228e] type 00 class 0x040300
[ 0.143185] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.143232] pci 0000:01:00.1: enabling Extended Tags
[ 0.143356] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.143358] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.143360] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.143363] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff
64bit pref]
[ 0.143380] pci_bus 0000:02: extended config space not accessible
[ 0.143427] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.143436] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window]
(subtractive decode)
[ 0.143438] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window]
(subtractive decode)
[ 0.143439] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff
window] (subtractive decode)
[ 0.143440] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff
window] (subtractive decode)
[ 0.143867] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.143869] ACPI: PCI: Interrupt link LNKA disabled
[ 0.143911] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.143912] ACPI: PCI: Interrupt link LNKB disabled
[ 0.143953] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.143954] ACPI: PCI: Interrupt link LNKC disabled
[ 0.143993] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.143994] ACPI: PCI: Interrupt link LNKD disabled
[ 0.144032] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.144033] ACPI: PCI: Interrupt link LNKE disabled
[ 0.144072] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.144073] ACPI: PCI: Interrupt link LNKF disabled
[ 0.144112] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.144112] ACPI: PCI: Interrupt link LNKG disabled
[ 0.144150] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.144151] ACPI: PCI: Interrupt link LNKH disabled
[ 0.144322] iommu: Default domain type: Translated
[ 0.144322] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.144322] pps_core: LinuxPPS API ver. 1 registered
[ 0.144322] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 0.144322] PTP clock support registered
[ 0.144322] EDAC MC: Ver: 3.0.0
[ 0.144322] Registered efivars operations
[ 0.144322] NetLabel: Initializing
[ 0.144322] NetLabel: domain hash size = 128
[ 0.144322] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.144322] NetLabel: unlabeled traffic allowed by default
[ 0.144322] PCI: Using ACPI for IRQ routing
[ 0.146204] PCI: pci_cache_line_size set to 64 bytes
[ 0.146245] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.146246] e820: reserve RAM buffer [mem 0xd36d3018-0xd3ffffff]
[ 0.146248] e820: reserve RAM buffer [mem 0xd4308000-0xd7ffffff]
[ 0.146249] e820: reserve RAM buffer [mem 0xd5b84000-0xd7ffffff]
[ 0.146249] e820: reserve RAM buffer [mem 0xdb70a000-0xdbffffff]
[ 0.146250] e820: reserve RAM buffer [mem 0xdbf56000-0xdbffffff]
[ 0.146251] e820: reserve RAM buffer [mem 0xdc7b4000-0xdfffffff]
[ 0.146252] e820: reserve RAM buffer [mem 0xddf1f000-0xdfffffff]
[ 0.146253] e820: reserve RAM buffer [mem 0xdf611000-0xdfffffff]
[ 0.146254] e820: reserve RAM buffer [mem 0x31e000000-0x31fffffff]
[ 0.146267] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.146267] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.146267] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.146267] vgaarb: loaded
[ 0.147615] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.147624] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.149667] clocksource: Switched to clocksource tsc-early
[ 0.149776] VFS: Disk quotas dquot_6.6.0
[ 0.149787] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.149896] AppArmor: AppArmor Filesystem Enabled
[ 0.149913] pnp: PnP ACPI init
[ 0.149999] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.150072] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.150075] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.150076] system 00:01: [io 0xffff] has been reserved
[ 0.150078] system 00:01: [io 0xffff] has been reserved
[ 0.150079] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.150080] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.150081] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.150083] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.150140] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.150218] system 00:04: [io 0x0a40-0x0a4f] has been reserved
[ 0.150220] system 00:04: [io 0x0a00-0x0a3f] has been reserved
[ 0.150258] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.150786] pnp 00:06: [dma 0 disabled]
[ 0.150964] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.150967] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.150968] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.150970] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.150972] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.150974] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.150976] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.150977] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.150979] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.150981] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.150983] system 00:07: [mem 0xf2000000-0xf2000fff] has been reserved
[ 0.151079] pnp: PnP ACPI: found 8 devices
[ 0.156630] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.156723] NET: Registered PF_INET protocol family
[ 0.156862] IP idents hash table entries: 262144 (order: 9, 2097152 bytes,
linear)
[ 0.159734] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5,
131072 bytes, linear)
[ 0.159763] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ 0.159822] TCP established hash table entries: 131072 (order: 8, 1048576
bytes, linear)
[ 0.160068] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes,
linear)
[ 0.160295] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.160372] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes,
linear)
[ 0.160440] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.160482] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes,
linear)
[ 0.160537] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.160546] NET: Registered PF_XDP protocol family
[ 0.160558] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.160562] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.160565] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.160567] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff
64bit pref]
[ 0.160570] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.160583] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.160584] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.160586] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.160587] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff window]
[ 0.160588] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.160590] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.160591] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit
pref]
[ 0.160593] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.160594] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.160595] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.160597] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xfeafffff window]
[ 0.186425] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x760 took 25155
usecs
[ 0.209726] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x760 took 22734
usecs
[ 0.233723] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x760 took 23422
usecs
[ 0.233754] pci 0000:01:00.1: extending delay after power-on from D3hot to
20 msec
[ 0.233782] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.233788] PCI: CLS 64 bytes, default 64
[ 0.233854] DMAR: No ATSR found
[ 0.233855] DMAR: No SATC found
[ 0.233856] DMAR: dmar0: Using Queued invalidation
[ 0.233896] pci 0000:00:00.0: Adding to iommu group 0
[ 0.233903] Trying to unpack rootfs image as initramfs...
[ 0.233907] pci 0000:00:01.0: Adding to iommu group 1
[ 0.233913] pci 0000:00:14.0: Adding to iommu group 2
[ 0.233923] pci 0000:00:16.0: Adding to iommu group 3
[ 0.233929] pci 0000:00:16.3: Adding to iommu group 3
[ 0.233936] pci 0000:00:19.0: Adding to iommu group 4
[ 0.233942] pci 0000:00:1a.0: Adding to iommu group 5
[ 0.233948] pci 0000:00:1b.0: Adding to iommu group 6
[ 0.233955] pci 0000:00:1d.0: Adding to iommu group 7
[ 0.233961] pci 0000:00:1e.0: Adding to iommu group 8
[ 0.233973] pci 0000:00:1f.0: Adding to iommu group 9
[ 0.233979] pci 0000:00:1f.2: Adding to iommu group 9
[ 0.233986] pci 0000:00:1f.3: Adding to iommu group 9
[ 0.233990] pci 0000:01:00.0: Adding to iommu group 1
[ 0.233995] pci 0000:01:00.1: Adding to iommu group 1
[ 0.234598] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.234601] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.234602] software IO TLB: mapped [mem
0x00000000ced9b000-0x00000000d2d9b000] (64MB)
[ 0.234983] Initialise system trusted keyrings
[ 0.234994] Key type blacklist registered
[ 0.235041] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.236132] zbud: loaded
[ 0.236359] integrity: Platform Keyring initialized
[ 0.236365] integrity: Machine keyring initialized
[ 0.236367] Key type asymmetric registered
[ 0.236368] Asymmetric key parser 'x509' registered
[ 0.608919] Freeing initrd memory: 66052K
[ 0.613313] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.613340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
248)
[ 0.613365] io scheduler mq-deadline registered
[ 0.614240] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.614678] ACPI: \_TZ_.TZ00: Invalid active0 threshold
[ 0.614750] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.614751] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.614906] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.614908] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ 0.615022] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.615216] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
16550A
[ 0.615663] serial 0000:00:16.3: enabling device (0000 -> 0003)
[ 0.615942] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 19, base_baud = 115200)
is a 16550A
[ 0.616176] Linux agpgart interface v0.103
[ 0.616224] AMD-Vi: AMD IOMMUv2 functionality not available on this system -
This is not a bug.
[ 0.616483] i8042: PNP: No PS/2 controller found.
[ 0.616484] i8042: Probing ports directly.
[ 0.619240] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.619245] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.619347] mousedev: PS/2 mouse device common for all mice
[ 0.619360] rtc_cmos 00:02: RTC can wake from S4
[ 0.619604] rtc_cmos 00:02: registered as rtc0
[ 0.619639] rtc_cmos 00:02: setting system clock to 2025-07-06T09:47:12 UTC
(1751795232)
[ 0.619664] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[ 0.619830] intel_pstate: Intel P-state driver initializing
[ 0.620091] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.620303] efifb: probing for efifb
[ 0.620318] efifb: framebuffer at 0xe0000000, using 8640k, total 8640k
[ 0.620320] efifb: mode is 1920x1080x32, linelength=8192, pages=1
[ 0.620321] efifb: scrolling: redraw
[ 0.620321] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.620397] Console: switching to colour frame buffer device 240x67
[ 0.622137] fb0: EFI VGA frame buffer device
[ 0.631518] NET: Registered PF_INET6 protocol family
[ 0.636181] Segment Routing with IPv6
[ 0.636191] In-situ OAM (IOAM) with IPv6
[ 0.636210] mip6: Mobile IPv6
[ 0.636214] NET: Registered PF_PACKET protocol family
[ 0.636339] mpls_gso: MPLS GSO support
[ 0.636762] microcode: sig=0x306a9, pf=0x2, revision=0x21
[ 0.636821] microcode: Microcode Update Driver: v2.2.
[ 0.636827] IPI shorthand broadcast: enabled
[ 0.636860] sched_clock: Marking stable (636475619, 166582)->(644911678,
-8269477)
[ 0.637132] registered taskstats version 1
[ 0.637141] Loading compiled-in X.509 certificates
[ 0.654044] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.654059] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux:
14011249c2675ea8e5148542202005810584b25f'
[ 0.654472] zswap: loaded using pool lzo/zbud
[ 0.654912] Key type .fscrypt registered
[ 0.654916] Key type fscrypt-provisioning registered
[ 0.659052] Key type encrypted registered
[ 0.659059] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.659581] integrity: Loading X.509 certificate: UEFI:db
[ 0.659635] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA
2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.659638] integrity: Loading X.509 certificate: UEFI:db
[ 0.659669] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA
2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.661081] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar
table)
[ 0.661255] integrity: Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.661256] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar
table)
[ 0.661418] integrity: Loaded X.509 cert 'DKMS module signing key:
f52f2c9685abe1d3a3587635de233d8884a329fa'
[ 0.661421] ima: No TPM chip found, activating TPM-bypass!
[ 0.661422] ima: Allocated hash algorithm: sha256
[ 0.661462] evm: Initialising EVM extended attributes:
[ 0.661463] evm: security.selinux
[ 0.661462] audit: type=1807 audit(1751795232.535:2): action=measure
func=KEXEC_KERNEL_CHECK res=1
[ 0.661464] evm: security.SMACK64 (disabled)
[ 0.661464] evm: security.SMACK64EXEC (disabled)
[ 0.661465] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.661466] evm: security.SMACK64MMAP (disabled)
[ 0.661466] evm: security.apparmor
[ 0.661467] evm: security.ima
[ 0.661467] audit: type=1807 audit(1751795232.535:3): action=measure
func=MODULE_CHECK res=1
[ 0.661468] evm: security.capability
[ 0.661468] evm: HMAC attrs: 0x1
[ 0.748310] Lockdown: swapper/0: hibernation is restricted; see man
kernel_lockdown.7
[ 0.748325] clk: Disabling unused clocks
[ 0.749144] Freeing unused decrypted memory: 2036K
[ 0.749470] Freeing unused kernel image (initmem) memory: 2800K
[ 0.749510] Write protecting the kernel read-only data: 26624k
[ 0.749896] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.750088] Freeing unused kernel image (rodata/data gap) memory: 1144K
[ 0.790743] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.790745] x86/mm: Checking user space page tables
[ 0.828841] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.828845] Run /init as init process
[ 0.828846] with arguments:
[ 0.828847] /init
[ 0.828847] splash
[ 0.828848] with environment:
[ 0.828849] HOME=/
[ 0.828849] TERM=linux
[ 0.828850] BOOT_IMAGE=/vmlinuz-6.1.0-35-amd64
[ 0.970984] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.972910] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method
not found
[ 0.985999] ACPI: button: Power Button [PWRB]
[ 0.986075] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.988943] ACPI: button: Power Button [PWRF]
[ 0.996694] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.996697] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.996864] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to
dynamic conservative mode
[ 1.001010] ACPI: bus type USB registered
[ 1.001029] usbcore: registered new interface driver usbfs
[ 1.001035] usbcore: registered new interface driver hub
[ 1.001044] usbcore: registered new device driver usb
[ 1.003168] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042F conflicts with OpRegion
0x0000000000000400-0x000000000000047F (\PMIO) (20220331/utaddress-204)
[ 1.003173] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.003179] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20220331/utaddress-204)
[ 1.003181] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.003182] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20220331/utaddress-204)
[ 1.003184] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.003185] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20220331/utaddress-204)
[ 1.003187] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.003188] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.005845] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.005852] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 1.005866] ehci-pci 0000:00:1a.0: debug port 2
[ 1.009804] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7138000
[ 1.010375] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.011291] i2c i2c-0: 4/4 memory slots populated (from DMI)
[ 1.011626] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.011969] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 1.012417] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 1.012723] i2c i2c-0: Successfully instantiated SPD at 0x53
[ 1.016652] SCSI subsystem initialized
[ 1.024307] cryptd: max_cpu_qlen set to 1000
[ 1.025646] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.025704] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.01
[ 1.025706] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.025708] usb usb1: Product: EHCI Host Controller
[ 1.025709] usb usb1: Manufacturer: Linux 6.1.0-35-amd64 ehci_hcd
[ 1.025710] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.025811] hub 1-0:1.0: USB hub found
[ 1.025819] hub 1-0:1.0: 3 ports detected
[ 1.037362] AVX version of gcm_enc/dec engaged.
[ 1.037385] AES CTR mode by8 optimization enabled
[ 1.037701] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.037708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 1.038813] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100
quirks 0x000000000000b930
[ 1.039015] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.039020] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 3
[ 1.039036] ehci-pci 0000:00:1d.0: debug port 2
[ 1.042969] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7137000
[ 1.043066] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.043069] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 4
[ 1.043072] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.043112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.01
[ 1.043114] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.043116] usb usb2: Product: xHCI Host Controller
[ 1.043117] usb usb2: Manufacturer: Linux 6.1.0-35-amd64 xhci-hcd
[ 1.043118] usb usb2: SerialNumber: 0000:00:14.0
[ 1.043174] libata version 3.00 loaded.
[ 1.043351] hub 2-0:1.0: USB hub found
[ 1.043364] hub 2-0:1.0: 4 ports detected
[ 1.043744] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 6.01
[ 1.043746] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.043748] usb usb4: Product: xHCI Host Controller
[ 1.043749] usb usb4: Manufacturer: Linux 6.1.0-35-amd64 xhci-hcd
[ 1.043750] usb usb4: SerialNumber: 0000:00:14.0
[ 1.043827] hub 4-0:1.0: USB hub found
[ 1.043838] hub 4-0:1.0: 4 ports detected
[ 1.047902] ahci 0000:00:1f.2: version 3.0
[ 1.048093] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3
impl SATA mode
[ 1.048097] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
apst
[ 1.057649] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.057720] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.01
[ 1.057723] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.057724] usb usb3: Product: EHCI Host Controller
[ 1.057725] usb usb3: Manufacturer: Linux 6.1.0-35-amd64 ehci_hcd
[ 1.057726] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.057863] hub 3-0:1.0: USB hub found
[ 1.057873] hub 3-0:1.0: 3 ports detected
[ 1.062031] scsi host0: ahci
[ 1.062138] scsi host1: ahci
[ 1.062213] scsi host2: ahci
[ 1.062282] scsi host3: ahci
[ 1.062352] scsi host4: ahci
[ 1.062422] scsi host5: ahci
[ 1.062458] ata1: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136100
irq 28
[ 1.062462] ata2: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136180
irq 28
[ 1.062463] ata3: DUMMY
[ 1.062463] ata4: DUMMY
[ 1.062464] ata5: DUMMY
[ 1.062465] ata6: DUMMY
[ 1.108667] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC
clock
[ 1.200091] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
90:b1:1c:5f:2e:78
[ 1.200095] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.200147] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1011FF-0FF
[ 1.220214] tsc: Refined TSC clocksource calibration: 3192.738 MHz
[ 1.220234] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x2e057e038b8, max_idle_ns: 440795295529 ns
[ 1.220272] clocksource: Switched to clocksource tsc
[ 1.260208] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.280211] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.292210] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.358892] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.358940] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.359565] ata2.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK)
filtered out
[ 1.359574] ata2.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION
OVERLAY) filtered out
[ 1.360060] ata2.00: supports DRM functions and may not be fully accessible
[ 1.360065] ata2.00: ATA-11: Samsung SSD 860 QVO 1TB, RVQ01B6Q, max UDMA/133
[ 1.360516] ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK)
filtered out
[ 1.360525] ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION
OVERLAY) filtered out
[ 1.360546] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.360982] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device
(Stat=0x51 Err=0x04)
[ 1.362509] ata1.00: ATA-9: INTENSO SSD, V1027A0, max UDMA/133
[ 1.362815] ata2.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 1.363416] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.363465] ata2.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK)
filtered out
[ 1.363472] ata2.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION
OVERLAY) filtered out
[ 1.363530] ata2.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device
(Stat=0x51 Err=0x04)
[ 1.363811] ata2.00: supports DRM functions and may not be fully accessible
[ 1.366132] ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK)
filtered out
[ 1.366141] ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION
OVERLAY) filtered out
[ 1.366569] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device
(Stat=0x51 Err=0x04)
[ 1.366914] ata2.00: configured for UDMA/133
[ 1.368949] ata1.00: configured for UDMA/133
[ 1.370268] scsi 0:0:0:0: Direct-Access ATA INTENSO SSD 7A0
PQ: 0 ANSI: 5
[ 1.371445] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q
PQ: 0 ANSI: 5
[ 1.388579] ata2.00: Enabling discard_zeroes_data
[ 1.388593] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/932 GiB)
[ 1.388593] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02
TB/954 GiB)
[ 1.388603] sd 0:0:0:0: [sda] Write Protect is off
[ 1.388604] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.388605] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.388605] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.388618] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.388620] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.388634] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.388645] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 1.389047] ata2.00: Enabling discard_zeroes_data
[ 1.390190] sda: sda1 sda2 sda3
[ 1.390352] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.390530] sdb: sdb1
[ 1.391443] sd 1:0:0:0: [sdb] supports TCG Opal
[ 1.391445] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.400219] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.416771] usb 1-1: New USB device found, idVendor=8087, idProduct=0024,
bcdDevice= 0.00
[ 1.416776] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.417054] hub 1-1:1.0: USB hub found
[ 1.417129] hub 1-1:1.0: 6 ports detected
[ 1.436967] usb 2-1: New USB device found, idVendor=0bda, idProduct=5411,
bcdDevice= 1.01
[ 1.436970] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.436972] usb 2-1: Product: USB2.1 Hub
[ 1.436973] usb 2-1: Manufacturer: Generic
[ 1.437826] hub 2-1:1.0: USB hub found
[ 1.438519] hub 2-1:1.0: 5 ports detected
[ 1.452523] usb 3-1: New USB device found, idVendor=8087, idProduct=0024,
bcdDevice= 0.00
[ 1.452527] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.452956] hub 3-1:1.0: USB hub found
[ 1.453132] hub 3-1:1.0: 8 ports detected
[ 1.457660] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled.
Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.457683] device-mapper: uevent: version 1.0.3
[ 1.457786] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised:
dm-de...@redhat.com
[ 1.483661] usbcore: registered new interface driver usb-storage
[ 1.503409] sdhci: Secure Digital Host Controller Interface driver
[ 1.503411] sdhci: Copyright(c) Pierre Ossman
[ 1.556415] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.585043] usb 4-1: New USB device found, idVendor=0bda, idProduct=0411,
bcdDevice= 1.01
[ 1.585051] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.585055] usb 4-1: Product: USB3.2 Hub
[ 1.585057] usb 4-1: Manufacturer: Generic
[ 1.586910] hub 4-1:1.0: USB hub found
[ 1.588189] hub 4-1:1.0: 4 ports detected
[ 1.704207] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.708211] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 1.813556] usb 1-1.4: Duplicate descriptor for config 1 interface 1
altsetting 5, skipping
[ 1.814032] usb 1-1.4: New USB device found, idVendor=0a12, idProduct=0001,
bcdDevice=88.91
[ 1.814040] usb 1-1.4: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 1.814044] usb 1-1.4: Product: USB2.0-BT
[ 1.856698] usb 2-4: New USB device found, idVendor=1a40, idProduct=0101,
bcdDevice= 1.11
[ 1.856706] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.856709] usb 2-4: Product: USB 2.0 Hub
[ 1.857303] hub 2-4:1.0: USB hub found
[ 1.857345] hub 2-4:1.0: 4 ports detected
[ 1.984350] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd
[ 2.005759] usb 4-2: New USB device found, idVendor=0781, idProduct=5583,
bcdDevice= 1.00
[ 2.005766] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.005769] usb 4-2: Product: Ultra Fit
[ 2.005772] usb 4-2: Manufacturer: SanDisk
[ 2.005774] usb 4-2: SerialNumber:
0101b1212cea5a7f4d018d7c78f6be450708b304a746664c3b1252d09d0a9b376eab000000000000000000005a1b421600075300835581078a262bb1
[ 2.006661] usb-storage 4-2:1.0: USB Mass Storage device detected
[ 2.006950] scsi host6: usb-storage 4-2:1.0
[ 2.012005] usbcore: registered new interface driver uas
[ 2.084208] usb 2-1.2: new full-speed USB device number 4 using xhci_hcd
[ 2.188915] usb 2-1.2: New USB device found, idVendor=413c, idProduct=4503,
bcdDevice= 2.40
[ 2.188923] usb 2-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.188926] usb 2-1.2: Product: Dell Universal Receiver
[ 2.188929] usb 2-1.2: Manufacturer: Dell Computer Corp
[ 2.209318] hid: raw HID events driver (C) Jiri Kosina
[ 2.219962] usbcore: registered new interface driver usbhid
[ 2.219966] usbhid: USB HID core driver
[ 2.223133] input: Dell Computer Corp Dell Universal Receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:413C:4503.0001/input/input5
[ 2.304360] hid-generic 0003:413C:4503.0001: input,hidraw0: USB HID v1.11
Keyboard [Dell Computer Corp Dell Universal Receiver] on
usb-0000:00:14.0-1.2/input0
[ 2.304712] input: Dell Computer Corp Dell Universal Receiver Mouse as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:413C:4503.0002/input/input6
[ 2.304932] input: Dell Computer Corp Dell Universal Receiver Consumer
Control as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:413C:4503.0002/input/input7
[ 2.304977] input: Dell Computer Corp Dell Universal Receiver System Control
as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:413C:4503.0002/input/input8
[ 2.305105] hid-generic 0003:413C:4503.0002: input,hidraw1: USB HID v1.11
Mouse [Dell Computer Corp Dell Universal Receiver] on
usb-0000:00:14.0-1.2/input1
[ 2.305511] hid-generic 0003:413C:4503.0003: hiddev0,hidraw2: USB HID v1.11
Device [Dell Computer Corp Dell Universal Receiver] on
usb-0000:00:14.0-1.2/input2
[ 2.384209] usb 2-4.1: new full-speed USB device number 5 using xhci_hcd
[ 2.605062] usb 2-4.1: New USB device found, idVendor=0557, idProduct=8021,
bcdDevice= 1.00
[ 2.605070] usb 2-4.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.607708] hub 2-4.1:1.0: USB hub found
[ 2.607860] hub 2-4.1:1.0: 4 ports detected
[ 2.896217] usb 2-4.1.1: new full-speed USB device number 6 using xhci_hcd
[ 3.013329] scsi 6:0:0:0: Direct-Access SanDisk Ultra Fit 1.00
PQ: 0 ANSI: 6
[ 3.014991] sd 6:0:0:0: [sdc] 120176640 512-byte logical blocks: (61.5
GB/57.3 GiB)
[ 3.015477] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.015485] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 3.015892] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.017656] usb 2-4.1.1: New USB device found, idVendor=25a7,
idProduct=fa11, bcdDevice= 2.00
[ 3.017664] usb 2-4.1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.017668] usb 2-4.1.1: Product: 2.4G Wireless Receiver
[ 3.017670] usb 2-4.1.1: Manufacturer: Nordic
[ 3.020798] sdc: sdc1
[ 3.020983] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.032794] input: Nordic 2.4G Wireless Receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1.1/2-4.1.1:1.0/0003:25A7:FA11.0004/input/input9
[ 3.140290] hid-generic 0003:25A7:FA11.0004: input,hidraw3: USB HID v1.10
Keyboard [Nordic 2.4G Wireless Receiver] on usb-0000:00:14.0-4.1.1/input0
[ 3.164859] input: Nordic 2.4G Wireless Receiver Mouse as
/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1.1/2-4.1.1:1.1/0003:25A7:FA11.0005/input/input10
[ 3.164950] input: Nordic 2.4G Wireless Receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1.1/2-4.1.1:1.1/0003:25A7:FA11.0005/input/input11
[ 3.165021] input: Nordic 2.4G Wireless Receiver Consumer Control as
/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1.1/2-4.1.1:1.1/0003:25A7:FA11.0005/input/input12
[ 3.224267] input: Nordic 2.4G Wireless Receiver System Control as
/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1.1/2-4.1.1:1.1/0003:25A7:FA11.0005/input/input13
[ 3.224372] hid-generic 0003:25A7:FA11.0005: input,hiddev1,hidraw4: USB HID
v1.10 Mouse [Nordic 2.4G Wireless Receiver] on usb-0000:00:14.0-4.1.1/input1
[ 3.242867] hid-generic 0003:25A7:FA11.0006: item fetching failed at offset
157/158
[ 3.242911] hid-generic: probe of 0003:25A7:FA11.0006 failed with error -22
[ 13.515273] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota
mode: none.
[ 13.565930] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 13.690651] systemd[1]: Inserted module 'autofs4'
[ 13.732470] systemd[1]: systemd 252.38-1~deb12u1 running in system mode
(+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL
+ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP
+LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD
-BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 13.732484] systemd[1]: Detected architecture x86-64.
[ 13.733974] systemd[1]: Hostname set to <uranus>.
[ 13.735890] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man
kernel_lockdown.7
[ 13.997756] zram: Added device: zram0
[ 14.113168] systemd[1]: Queued start job for default target graphical.target.
[ 14.137747] systemd[1]: Created slice system-getty.slice - Slice
/system/getty.
[ 14.138183] systemd[1]: Created slice system-modprobe.slice - Slice
/system/modprobe.
[ 14.138550] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice -
Cryptsetup Units Slice.
[ 14.138923] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice
/system/systemd-fsck.
[ 14.139290] systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice
- Slice /system/systemd-zram-setup.
[ 14.139579] systemd[1]: Created slice user.slice - User and Session Slice.
[ 14.139644] systemd[1]: Started systemd-ask-password-wall.path - Forward
Password Requests to Wall Directory Watch.
[ 14.139812] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount -
Arbitrary Executable File Formats File System Automount Point.
[ 14.139837] systemd[1]: Expecting device
dev-disk-by\x2dpartlabel-EFI\x2dSystem.device -
/dev/disk/by-partlabel/EFI-System...
[ 14.139847] systemd[1]: Expecting device
dev-disk-by\x2duuid-01f12e5a\x2dbe12\x2d4e9d\x2d9c13\x2dc39c382fc81e.device -
/dev/disk/by-uuid/01f12e5a-be12-4e9d-9c13-c39c382fc81e...
[ 14.139855] systemd[1]: Expecting device
dev-disk-by\x2duuid-9a64cf57\x2de04b\x2d4949\x2db663\x2d38ce558a33f1.device -
/dev/disk/by-uuid/9a64cf57-e04b-4949-b663-38ce558a33f1...
[ 14.139864] systemd[1]: Expecting device
dev-disk-by\x2duuid-a17b7002\x2da6bd\x2d42ac\x2da95d\x2d1fdfdb91ad21.device -
/dev/disk/by-uuid/a17b7002-a6bd-42ac-a95d-1fdfdb91ad21...
[ 14.139872] systemd[1]: Expecting device dev-mapper-sdb1_crypt.device -
/dev/mapper/sdb1_crypt...
[ 14.139880] systemd[1]: Expecting device dev-zram0.device - /dev/zram0...
[ 14.139911] systemd[1]: Reached target integritysetup.target - Local
Integrity Protected Volumes.
[ 14.139936] systemd[1]: Reached target nss-user-lookup.target - User and
Group Name Lookups.
[ 14.139958] systemd[1]: Reached target slices.target - Slice Units.
[ 14.139978] systemd[1]: Reached target swap.target - Swaps.
[ 14.139998] systemd[1]: Reached target veritysetup.target - Local Verity
Protected Volumes.
[ 14.140077] systemd[1]: Listening on dm-event.socket - Device-mapper event
daemon FIFOs.
[ 14.140206] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon
socket.
[ 14.144321] systemd[1]: Listening on rpcbind.socket - RPCbind Server
Activation Socket.
[ 14.144465] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd
communication Socket.
[ 14.144535] systemd[1]: Listening on systemd-initctl.socket - initctl
Compatibility Named Pipe.
[ 14.144913] systemd[1]: Listening on systemd-journald-audit.socket - Journal
Audit Socket.
[ 14.145039] systemd[1]: Listening on systemd-journald-dev-log.socket -
Journal Socket (/dev/log).
[ 14.145167] systemd[1]: Listening on systemd-journald.socket - Journal
Socket.
[ 14.145588] systemd[1]: Listening on systemd-udevd-control.socket - udev
Control Socket.
[ 14.145690] systemd[1]: Listening on systemd-udevd-kernel.socket - udev
Kernel Socket.
[ 14.146520] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File
System...
[ 14.147351] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File
System...
[ 14.148223] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File
System...
[ 14.149072] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace
File System...
[ 14.149201] systemd[1]: auth-rpcgss-module.service - Kernel Module
supporting RPCSEC_GSS was skipped because of an unmet condition check
(ConditionPathExists=/etc/krb5.keytab).
[ 14.149301] systemd[1]: Finished blk-availability.service - Availability of
block devices.
[ 14.150434] systemd[1]: Starting keyboard-setup.service - Set the console
keyboard layout...
[ 14.151347] systemd[1]: Starting kmod-static-nodes.service - Create List of
Static Device Nodes...
[ 14.152336] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2
mirrors, snapshots etc. using dmeventd or progress polling...
[ 14.152411] systemd[1]: lxd-agent.service - LXD - agent was skipped because
of an unmet condition check
(ConditionPathExists=/dev/virtio-ports/org.linuxcontainers.lxd).
[ 14.153279] systemd[1]: Starting modprobe@configfs.service - Load Kernel
Module configfs...
[ 14.154176] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel
Module dm_mod...
[ 14.155058] systemd[1]: Starting modprobe@drm.service - Load Kernel Module
drm...
[ 14.156187] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel
Module efi_pstore...
[ 14.157063] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module
fuse...
[ 14.157972] systemd[1]: Starting modprobe@loop.service - Load Kernel Module
loop...
[ 14.158157] systemd[1]: systemd-fsck-root.service - File System Check on
Root Device was skipped because of an unmet condition check
(ConditionPathExists=!/run/initramfs/fsck-root).
[ 14.159693] systemd[1]: Starting systemd-journald.service - Journal
Service...
[ 14.163379] systemd[1]: Starting systemd-modules-load.service - Load Kernel
Modules...
[ 14.164327] systemd[1]: Starting systemd-remount-fs.service - Remount Root
and Kernel File Systems...
[ 14.165303] pstore: Using crash dump compression: deflate
[ 14.165312] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All
udev Devices...
[ 14.166920] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 14.167149] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File
System.
[ 14.167338] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File
System.
[ 14.167522] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File
System.
[ 14.167831] systemd[1]: Finished keyboard-setup.service - Set the console
keyboard layout.
[ 14.168162] systemd[1]: Finished kmod-static-nodes.service - Create List of
Static Device Nodes.
[ 14.168624] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 14.168739] systemd[1]: Finished modprobe@configfs.service - Load Kernel
Module configfs.
[ 14.168989] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 14.169100] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel
Module dm_mod.
[ 14.170129] systemd[1]: Mounting sys-kernel-config.mount - Kernel
Configuration File System...
[ 14.172208] systemd[1]: Mounted sys-kernel-config.mount - Kernel
Configuration File System.
[ 14.183022] pstore: Registered efi as persistent store backend
[ 14.183662] systemd[1]: modprobe@efi_pstore.service: Deactivated
successfully.
[ 14.183817] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel
Module efi_pstore.
[ 14.186217] EXT4-fs (dm-0): re-mounted. Quota mode: none.
[ 14.187587] systemd[1]: Finished systemd-remount-fs.service - Remount Root
and Kernel File Systems.
[ 14.187839] systemd[1]: systemd-firstboot.service - First Boot Wizard was
skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 14.187878] systemd[1]: systemd-pstore.service - Platform Persistent Storage
Archival was skipped because of an unmet condition check
(ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 14.188885] systemd[1]: Starting systemd-random-seed.service - Load/Save
Random Seed...
[ 14.189826] systemd[1]: Starting systemd-sysusers.service - Create System
Users...
[ 14.190734] loop: module loaded
[ 14.200677] ACPI: bus type drm_connector registered
[ 14.201420] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 14.201570] systemd[1]: Finished modprobe@drm.service - Load Kernel Module
drm.
[ 14.202422] systemd[1]: Finished systemd-random-seed.service - Load/Save
Random Seed.
[ 14.202638] systemd[1]: first-boot-complete.target - First Boot Complete was
skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 14.202788] fuse: init (API version 7.38)
[ 14.203115] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 14.203230] systemd[1]: Finished modprobe@loop.service - Load Kernel Module
loop.
[ 14.203533] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 14.203647] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module
fuse.
[ 14.204803] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE
Control File System...
[ 14.204882] systemd[1]: systemd-repart.service - Repartition Root Disk was
skipped because no trigger condition checks were met.
[ 14.206806] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control
File System.
[ 14.217154] lp: driver loaded but no devices found
[ 14.221995] ppdev: user-space parallel port driver
[ 14.223048] systemd[1]: Finished systemd-sysusers.service - Create System
Users.
[ 14.224210] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create
Static Device Nodes in /dev...
[ 14.239619] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create
Static Device Nodes in /dev.
[ 14.256536] systemd[1]: Starting systemd-udevd.service - Rule-based Manager
for Device Events and Files...
[ 14.256659] systemd[1]: Started systemd-journald.service - Journal Service.
[ 14.269829] systemd-journald[833]: Received client request to flush runtime
journal.
[ 14.530055] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.530636] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 14.531149] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 14.550539] zram0: detected capacity change from 0 to 6100480
[ 14.917224] EDAC ie31200: No ECC support
[ 14.917252] EDAC ie31200: No ECC support
[ 14.919125] at24 0-0050: supply vcc not found, using dummy regulator
[ 14.922058] at24 0-0050: 256 byte spd EEPROM, read-only
[ 14.922339] at24 0-0051: supply vcc not found, using dummy regulator
[ 14.924405] at24 0-0051: 256 byte spd EEPROM, read-only
[ 14.925423] at24 0-0052: supply vcc not found, using dummy regulator
[ 14.928060] at24 0-0052: 256 byte spd EEPROM, read-only
[ 14.928120] at24 0-0053: supply vcc not found, using dummy regulator
[ 14.967217] at24 0-0053: 256 byte spd EEPROM, read-only
[ 15.130263] nvidia: loading out-of-tree module taints kernel.
[ 15.130276] nvidia: module license 'NVIDIA' taints kernel.
[ 15.130277] Disabling lock debugging due to kernel taint
[ 15.172068] EXT4-fs (zram0): mounting ext2 file system using the ext4
subsystem
[ 15.172718] EXT4-fs (zram0): mounted filesystem without journal. Quota mode:
none.
[ 15.176816] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 15.182886] EXT4-fs (sda1): mounted filesystem without journal. Quota mode:
none.
[ 15.396642] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 15.403725] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota
mode: none.
[ 15.414270] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.4)
[ 15.554427] nvidia-nvlink: Nvlink Core is being initialized, major device
number 242
[ 15.556478] nvidia 0000:01:00.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=none:owns=io+mem
[ 15.561501] input: Dell WMI hotkeys as
/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input16
[ 15.603035] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 535.247.01 Wed
Mar 26 11:50:32 UTC 2025
[ 15.604687] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms
ovfl timer
[ 15.604690] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 15.604691] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 15.606369] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 16.133734] audit: type=1400 audit(1751795248.008:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=1119
comm="apparmor_parser"
[ 16.135657] audit: type=1400 audit(1751795248.008:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1121
comm="apparmor_parser"
[ 16.135662] audit: type=1400 audit(1751795248.008:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=1121 comm="apparmor_parser"
[ 16.143855] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for
UNIX platforms 535.247.01 Wed Mar 26 06:12:31 UTC 2025
[ 16.166366] audit: type=1400 audit(1751795248.040:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lxc-container-default"
pid=1120 comm="apparmor_parser"
[ 16.166371] audit: type=1400 audit(1751795248.040:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lxc-container-default-cgns"
pid=1120 comm="apparmor_parser"
[ 16.166373] audit: type=1400 audit(1751795248.040:9): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="lxc-container-default-with-mounting" pid=1120 comm="apparmor_parser"
[ 16.166375] audit: type=1400 audit(1751795248.040:10): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="lxc-container-default-with-nesting" pid=1120 comm="apparmor_parser"
[ 16.169078] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 16.169200] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 16.169209] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 16.169389] audit: type=1400 audit(1751795248.044:11): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1123
comm="apparmor_parser"
[ 16.169395] audit: type=1400 audit(1751795248.044:12): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1123 comm="apparmor_parser"
[ 16.169398] audit: type=1400 audit(1751795248.044:13): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=1123 comm="apparmor_parser"
[ 16.209268] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready
0x411111f0
[ 16.209579] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB:
line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 16.209583] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1
(0x14/0x0/0x0/0x0/0x0)
[ 16.209585] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 16.209587] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 16.209588] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 16.209590] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
[ 16.209591] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x19
[ 16.222092] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 16.222139] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 16.240416] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 16.240510] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 16.240977] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 16.241025] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 16.241066] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[ 16.241099] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[ 16.241162] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 16.267514] RPC: Registered named UNIX socket transport module.
[ 16.267518] RPC: Registered udp transport module.
[ 16.267518] RPC: Registered tcp transport module.
[ 16.267519] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.297862] Bluetooth: Core ver 2.22
[ 16.297893] NET: Registered PF_BLUETOOTH protocol family
[ 16.297894] Bluetooth: HCI device and connection manager initialized
[ 16.297898] Bluetooth: HCI socket layer initialized
[ 16.297900] Bluetooth: L2CAP socket layer initialized
[ 16.297903] Bluetooth: SCO socket layer initialized
[ 16.316166] usbcore: registered new interface driver btusb
[ 16.317041] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=10
rev=0089; LMP ver=10 subver=0089; manufacturer=2279
[ 16.317045] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding
workarounds and force-suspending once...
[ 16.317046] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot
8041a02 receive-issue workaround
[ 16.317047] Bluetooth: hci0: HCI Delete Stored Link Key command is
advertised, but not supported.
[ 16.317048] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting
command is advertised, but not supported.
[ 16.317049] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 16.632930] intel_rapl_common: Found RAPL domain package
[ 16.632937] intel_rapl_common: Found RAPL domain core
[ 16.632944] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 16.690095] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 17.760558] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on
minor 0
[ 18.085379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.085383] Bluetooth: BNEP filters: protocol multicast
[ 18.085387] Bluetooth: BNEP socket layer initialized
[ 18.089063] Bluetooth: MGMT ver 1.22
[ 18.097889] NET: Registered PF_ALG protocol family
[ 18.402061] NET: Registered PF_QIPCRTR protocol family
[ 19.537037] Bluetooth: RFCOMM TTY layer initialized
[ 19.537044] Bluetooth: RFCOMM socket layer initialized
[ 19.537049] Bluetooth: RFCOMM ver 1.11
[ 21.810202] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: Rx/Tx
[ 21.810250] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 22.744490] Lockdown: systemd-logind: hibernation is restricted; see man
kernel_lockdown.7
[ 23.029212] rfkill: input handler disabled
[ 23.890197] kauditd_printk_skb: 23 callbacks suppressed
[ 23.890200] audit: type=1400 audit(1751795255.764:37): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="lxc-container-default" pid=4900
comm="apparmor_parser"
[ 23.890204] audit: type=1400 audit(1751795255.764:38): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="lxc-container-default-cgns" pid=4900
comm="apparmor_parser"
[ 23.890206] audit: type=1400 audit(1751795255.764:39): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="lxc-container-default-with-mounting" pid=4900
comm="apparmor_parser"
[ 23.890208] audit: type=1400 audit(1751795255.764:40): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="lxc-container-default-with-nesting" pid=4900
comm="apparmor_parser"
[ 24.044184] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 24.101132] NET: Registered PF_VSOCK protocol family
[ 24.272781] audit: type=1400 audit(1751795256.148:41): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="/usr/bin/lxc-start" pid=5401 comm="apparmor_parser"
[ 24.291389] audit: type=1400 audit(1751795256.164:42): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="lxc-container-default" pid=5406
comm="apparmor_parser"
[ 24.291396] audit: type=1400 audit(1751795256.164:43): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="lxc-container-default-cgns" pid=5406
comm="apparmor_parser"
[ 24.291399] audit: type=1400 audit(1751795256.164:44): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="lxc-container-default-with-mounting" pid=5406
comm="apparmor_parser"
[ 24.291401] audit: type=1400 audit(1751795256.164:45): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="lxc-container-default-with-nesting" pid=5406
comm="apparmor_parser"
[ 26.266928] audit: type=1400 audit(1751795258.140:46): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="lxd_dnsmasq-lxdbr0_</var/lib/lxd>" pid=5488 comm="apparmor_parser"
[ 26.976576] lxcbr0: port 1(veth6ca210de) entered blocking state
[ 26.976581] lxcbr0: port 1(veth6ca210de) entered disabled state
[ 26.976650] device veth6ca210de entered promiscuous mode
[ 26.976694] lxcbr0: port 1(veth6ca210de) entered blocking state
[ 26.976697] lxcbr0: port 1(veth6ca210de) entered forwarding state
[ 26.976733] lxcbr0: port 1(veth6ca210de) entered disabled state
[ 27.136421] physAftRVn: renamed from vetha6854fea
[ 27.156733] eth0: renamed from physAftRVn
[ 27.176465] lxcbr0: port 1(veth6ca210de) entered blocking state
[ 27.176470] lxcbr0: port 1(veth6ca210de) entered forwarding state
[ 27.176555] IPv6: ADDRCONF(NETDEV_CHANGE): lxcbr0: link becomes ready
[ 27.205366] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 27.236116] lxdbr0: port 1(vethe9785816) entered blocking state
[ 27.236122] lxdbr0: port 1(vethe9785816) entered disabled state
[ 27.236309] device vethe9785816 entered promiscuous mode
[ 27.360533] physMAeTZV: renamed from vethcaa06bc4
[ 27.376679] eth0: renamed from physMAeTZV
[ 27.396443] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.396487] lxdbr0: port 1(vethe9785816) entered blocking state
[ 27.396490] lxdbr0: port 1(vethe9785816) entered forwarding state
[ 27.396574] IPv6: ADDRCONF(NETDEV_CHANGE): lxdbr0: link becomes ready
[ 27.421554] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 27.744519] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 27.744720] cfg80211: Loaded X.509 cert 'b...@debian.org:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 27.744907] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 27.745075] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 27.745240] cfg80211: Loaded X.509 cert 'wens:
61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 27.747082] platform regulatory.0: firmware: direct-loading firmware
regulatory.db
[ 27.750697] platform regulatory.0: firmware: direct-loading firmware
regulatory.db.p7s
[ 30.758456] rfkill: input handler enabled
[ 32.478028] FAT-fs (sdc1): Volume was not properly unmounted. Some data may
be corrupt. Please run fsck.
[ 34.717129] show_signal: 2 callbacks suppressed
[ 34.717132] traps: light-locker[7379] trap int3 ip:7fb570660777
sp:7ffed716a040 error:0 in libglib-2.0.so.0.7400.6[7fb570622000+8d000]
[ 35.321374] Lockdown: fwupd: /dev/mem,kmem,port is restricted; see man
kernel_lockdown.7
[ 163.502429] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 163.502436] Bluetooth: HIDP socket layer initialized
[ 163.503288] hid-generic 0005:046D:B342.0007: unknown main item tag 0x0
[ 163.503430] input: Keyboard K380 Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:128/0005:046D:B342.0007/input/input26
[ 163.580442] hid-generic 0005:046D:B342.0007: input,hidraw5: BLUETOOTH HID
v42.01 Keyboard [Keyboard K380] on 04:7f:0e:37:e4:0f
[ 447.494713] usb 2-1: USB disconnect, device number 2
[ 447.494722] usb 2-1.2: USB disconnect, device number 4
[ 447.520974] usb 4-1: USB disconnect, device number 2
[ 490.872304] usb 4-1: new SuperSpeed USB device number 4 using xhci_hcd
[ 490.893452] usb 4-1: New USB device found, idVendor=0bc2, idProduct=aa15,
bcdDevice= 7.12
[ 490.893460] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 490.893463] usb 4-1: Product: Basic
[ 490.893465] usb 4-1: Manufacturer: Seagate
[ 490.893467] usb 4-1: SerialNumber: NT22MC62
[ 490.896545] scsi host7: uas
[ 490.897098] scsi 7:0:0:0: Direct-Access Seagate Basic 0712
PQ: 0 ANSI: 6
[ 490.899698] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 497.412955] sd 7:0:0:0: [sdd] 9767541167 512-byte logical blocks: (5.00
TB/4.55 TiB)
[ 497.412963] sd 7:0:0:0: [sdd] 4096-byte physical blocks
[ 497.413169] sd 7:0:0:0: [sdd] Write Protect is off
[ 497.413176] sd 7:0:0:0: [sdd] Mode Sense: 53 00 00 08
[ 497.413586] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 497.468461] sd 7:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
[ 497.468469] sd 7:0:0:0: [sdd] Optimal transfer size 33553920 bytes not a
multiple of preferred minimum block size (4096 bytes)
[ 500.367871] sdd: sdd1 sdd2 sdd3
[ 500.368356] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 573.336231] usb 4-1: USB disconnect, device number 4
[ 573.400254] sd 7:0:0:0: [sdd] Synchronizing SCSI cache
[ 573.640255] sd 7:0:0:0: [sdd] Synchronize Cache(10) failed: Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 576.652296] usb 4-1: new SuperSpeed USB device number 5 using xhci_hcd
[ 576.673424] usb 4-1: New USB device found, idVendor=0bc2, idProduct=aa15,
bcdDevice= 7.12
[ 576.673432] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 576.673435] usb 4-1: Product: Basic
[ 576.673438] usb 4-1: Manufacturer: Seagate
[ 576.673440] usb 4-1: SerialNumber: NT22MC62
[ 576.676011] scsi host7: uas
[ 576.676484] scsi 7:0:0:0: Direct-Access Seagate Basic 0712
PQ: 0 ANSI: 6
[ 576.679035] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 582.904444] sd 7:0:0:0: [sdd] 9767541167 512-byte logical blocks: (5.00
TB/4.55 TiB)
[ 582.904453] sd 7:0:0:0: [sdd] 4096-byte physical blocks
[ 582.904652] sd 7:0:0:0: [sdd] Write Protect is off
[ 582.904667] sd 7:0:0:0: [sdd] Mode Sense: 53 00 00 08
[ 582.905055] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 582.956507] sd 7:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
[ 582.956514] sd 7:0:0:0: [sdd] Optimal transfer size 33553920 bytes not a
multiple of preferred minimum block size (4096 bytes)
[ 583.654843] sdd: sdd1 sdd2 sdd3
[ 583.655362] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 701.669044] sdd:
[ 701.995509] sdd: sdd1
[ 702.191772] sdd: sdd1
[ 702.388087] sdd: sdd1 sdd2
[ 702.627814] sdd: sdd1 sdd2
[ 703.367705] sdd: sdd1 sdd2 sdd3
[ 703.489532] sdd: sdd1 sdd2 sdd3
[ 830.082722] systemd-journald[833]: Time jumped backwards, rotating.
[15492.853718] hid-generic 0005:046D:B342.0008: unknown main item tag 0x0
[15492.853882] input: Keyboard K380 Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:129/0005:046D:B342.0008/input/input29
[15492.925272] hid-generic 0005:046D:B342.0008: input,hidraw0: BLUETOOTH HID
v42.01 Keyboard [Keyboard K380] on 04:7f:0e:37:e4:0f
[15822.134406] perf: interrupt took too long (2506 > 2500), lowering
kernel.perf_event_max_sample_rate to 79750
[17923.211912] DMAR: DRHD: handling fault status reg 3
[17923.211924] DMAR: [DMA Read NO_PASID] Request device [00:14.0] fault addr
0xdf4f0000 [fault reason 0x06] PTE Read access is not set
[17953.306094] sd 7:0:0:0: [sdd] tag#27 uas_eh_abort_handler 0 uas-tag 8
inflight: CMD OUT
[17953.306105] sd 7:0:0:0: [sdd] tag#27 CDB: Write(16) 8a 00 00 00 00 00 00 20
84 b0 00 00 04 00 00 00
[17958.394091] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint
command
[17958.394103] xhci_hcd 0000:00:14.0: xHCI host controller not responding,
assume dead
[17958.394142] xhci_hcd 0000:00:14.0: HC died; cleaning up
[17958.394152] usb 2-4: USB disconnect, device number 3
[17958.394155] usb 2-4.1: USB disconnect, device number 5
[17958.394156] usb 2-4.1.1: USB disconnect, device number 6
[17958.394223] usb 4-1: cmd cmplt err -108
[17958.394226] usb 4-1: cmd cmplt err -108
[17958.394257] sd 7:0:0:0: [sdd] tag#26 uas_eh_abort_handler 0 uas-tag 7
inflight: CMD
[17958.394263] sd 7:0:0:0: [sdd] tag#26 CDB: Write(16) 8a 00 00 00 00 00 00 20
80 b0 00 00 04 00 00 00
[17958.394265] sd 7:0:0:0: [sdd] tag#25 uas_eh_abort_handler 0 uas-tag 6
inflight: CMD
[17958.394267] sd 7:0:0:0: [sdd] tag#25 CDB: Write(16) 8a 00 00 00 00 00 00 20
7c b0 00 00 04 00 00 00
[17958.394269] sd 7:0:0:0: [sdd] tag#24 uas_eh_abort_handler 0 uas-tag 5
inflight: CMD
[17958.394270] sd 7:0:0:0: [sdd] tag#24 CDB: Write(16) 8a 00 00 00 00 00 00 20
78 b0 00 00 04 00 00 00
[17958.394272] sd 7:0:0:0: [sdd] tag#21 uas_eh_abort_handler 0 uas-tag 2
inflight: CMD
[17958.394274] sd 7:0:0:0: [sdd] tag#21 CDB: Write(16) 8a 00 00 00 00 00 00 20
4d 28 00 00 04 00 00 00
[17958.394276] sd 7:0:0:0: [sdd] tag#20 uas_eh_abort_handler 0 uas-tag 1
inflight: CMD
[17958.394277] sd 7:0:0:0: [sdd] tag#20 CDB: Write(16) 8a 00 00 00 00 00 00 20
49 28 00 00 04 00 00 00
[17958.394290] usb 4-1: USB disconnect, device number 5
[17958.418116] sd 7:0:0:0: Device offlined - not ready after error recovery
[17958.418132] sd 7:0:0:0: Device offlined - not ready after error recovery
[17958.418134] sd 7:0:0:0: Device offlined - not ready after error recovery
[17958.418135] sd 7:0:0:0: Device offlined - not ready after error recovery
[17958.418136] sd 7:0:0:0: Device offlined - not ready after error recovery
[17958.418137] sd 7:0:0:0: Device offlined - not ready after error recovery
[17958.442092] device offline error, dev sdd, sector 2131120 op 0x1:(WRITE)
flags 0x800 phys_seg 128 prio class 2
[17958.442110] device offline error, dev sdd, sector 2130096 op 0x1:(WRITE)
flags 0x4800 phys_seg 128 prio class 2
[17958.442124] device offline error, dev sdd, sector 2129072 op 0x1:(WRITE)
flags 0x0 phys_seg 128 prio class 2
[17958.442127] device offline error, dev sdd, sector 2128048 op 0x1:(WRITE)
flags 0x4000 phys_seg 128 prio class 2
[17958.442134] device offline error, dev sdd, sector 2116904 op 0x1:(WRITE)
flags 0x104000 phys_seg 128 prio class 2
[17958.442137] Buffer I/O error on dev sdd3, logical block 421, lost async page
write
[17958.442144] Buffer I/O error on dev sdd3, logical block 422, lost async page
write
[17958.442146] Buffer I/O error on dev sdd3, logical block 423, lost async page
write
[17958.442148] Buffer I/O error on dev sdd3, logical block 424, lost async page
write
[17958.442149] Buffer I/O error on dev sdd3, logical block 425, lost async page
write
[17958.442151] Buffer I/O error on dev sdd3, logical block 426, lost async page
write
[17958.442153] Buffer I/O error on dev sdd3, logical block 427, lost async page
write
[17958.442154] Buffer I/O error on dev sdd3, logical block 428, lost async page
write
[17958.442156] Buffer I/O error on dev sdd3, logical block 429, lost async page
write
[17958.442158] Buffer I/O error on dev sdd3, logical block 430, lost async page
write
[17958.442225] device offline error, dev sdd, sector 2115880 op 0x1:(WRITE)
flags 0x104000 phys_seg 128 prio class 2
[17958.442336] device offline error, dev sdd, sector 2117928 op 0x1:(WRITE)
flags 0x100000 phys_seg 1 prio class 2
[17958.442374] device offline error, dev sdd, sector 2117936 op 0x1:(WRITE)
flags 0x800 phys_seg 31 prio class 2
[17958.442407] device offline error, dev sdd, sector 2118184 op 0x1:(WRITE)
flags 0x100000 phys_seg 33 prio class 2
[17958.442458] device offline error, dev sdd, sector 2118448 op 0x1:(WRITE)
flags 0x800 phys_seg 57 prio class 2
[17958.490108] sd 7:0:0:0: [sdd] Synchronizing SCSI cache
[17958.510115] sdc: detected capacity change from 120176640 to 0
[17958.542144] sd 7:0:0:0: [sdd] Synchronize Cache(10) failed: Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK
[17958.542258] xhci_hcd 0000:00:14.0: WARN Can't disable streams for endpoint
0x82, streams are being disabled already
[17958.542651] usb 4-2: USB disconnect, device number 3
rmmod xhci_pci
modprobe xhci_pci
2025-07-06 11:58:46.906078808 Relax-and-Recover 2.9 / 2025-01-31
2025-07-06 11:58:46.908653097 Running rear format (PID 112008 date 2025-07-06 11:58:46)
2025-07-06 11:58:46.911205755 Using log file: /home/sascha/git/rear/var/log/rear/rear-uranus.log
2025-07-06 11:58:47.128791002 Including conf/Linux-i386.conf
2025-07-06 11:58:47.135852902 Including conf/GNU/Linux.conf
2025-07-06 11:58:47.167915992 Including /home/sascha/git/rear/etc/rear/local.conf
2025-07-06 11:58:47.174757226 ======================
2025-07-06 11:58:47.177714814 Running 'init' stage
2025-07-06 11:58:47.180641899 ======================
2025-07-06 11:58:47.189337304 Including init/default/001_verify_config_arrays.sh
2025-07-06 11:58:47.500348969 Including init/default/002_check_rear_recover_mode.sh
2025-07-06 11:58:47.509722228 Running workflow format on the normal/original system
2025-07-06 11:58:47.515614555 Including init/default/010_EFISTUB_check.sh
2025-07-06 11:58:47.525199035 Including init/default/010_set_drlm_env.sh
2025-07-06 11:58:47.534820034 Including init/default/030_update_recovery_system.sh
2025-07-06 11:58:47.544146189 Including init/default/100_check_stale_nfs_mounts.sh
2025-07-06 11:58:47.555042499 Including init/default/950_check_missing_programs.sh
2025-07-06 11:58:47.568601977 Including init/default/998_dump_variables.sh
2025-07-06 11:58:47.578152054 Finished running 'init' stage in 0 seconds
2025-07-06 11:58:47.584076782 Running format workflow
2025-07-06 11:58:47.587127374 Command line options of the format workflow: /dev/sdd
2025-07-06 11:58:47.591457256 ======================
2025-07-06 11:58:47.594294784 Running 'format' stage
2025-07-06 11:58:47.597076602 ======================
2025-07-06 11:58:47.605954129 Including format/USB/default/200_check_usb_layout.sh
2025-07-06 11:58:48.017178604 USB or disk device /dev/sdd is not formatted with ext2/3/4 or btrfs filesystem
2025-07-06 11:58:48.021064979 Formatting /dev/sdd will remove all currently existing data on that whole device
2025-07-06 11:58:48.026331888 UserInput: called in /home/sascha/git/rear/usr/share/rear/format/USB/default/200_check_usb_layout.sh line 78
2025-07-06 11:58:48.032186818 UserInput: No choices specified
2025-07-06 11:58:48.035821226 Type exactly 'Yes' to format /dev/sdd with ext3 filesystem
2025-07-06 11:58:48.039420101 (default 'No' timeout 300 seconds)
2025-07-06 11:58:52.849770496 UserInput: 'read' got as user input 'Yes'
2025-07-06 11:58:52.860289058 Including format/USB/default/300_format_usb_disk.sh
2025-07-06 11:58:52.871263226 Repartitioning /dev/sdd
2025-07-06 11:58:52.875176872 Creating partition table of type gpt on /dev/sdd
2025-07-06 11:58:53.513607147 Making a BIOS bootable device /dev/sdd
2025-07-06 11:58:53.517285954 Creating BIOS boot partition /dev/sdd1
2025-07-06 11:58:53.828037465 Setting 'bios_grub' flag on BIOS boot partition /dev/sdd1
2025-07-06 11:58:54.035346197 Making an EFI bootable device /dev/sdd
2025-07-06 11:58:54.039567964 Creating EFI system partition 2 on device /dev/sdd with size 1024 MiB aligned at 8 MiB
2025-07-06 11:58:54.240233325 Setting 'esp' flag on EFI partition 2 on device /dev/sdd
2025-07-06 11:58:54.468633594 Creating ReaR data partition 3 on /dev/sdd up to 100% of /dev/sdd
2025-07-06 11:58:54.890114726 Setting 'legacy_boot' flag on ReaR data partition 3 on device /dev/sdd
2025-07-06 11:59:00.344023960 Creating vfat filesystem on EFI system partition on /dev/sdd2
2025-07-06 11:59:00.612236321 Creating ext3 filesystem with label 'REAR-000' on ReaR data partition /dev/sdd3
2025-07-06 16:42:02.879691316 Some messages from /var/tmp/rear.AnWeQjZuDF3AWVt/tmp/rear.format.stdout_stderr since the last called script 300_format_usb_disk.sh:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000, 214990848, 512000000, 550731776, 644972544
Allocating group tables: 0/37253 done
Writing inode tables: 0/37253 44/37253 129/37253 222/37253 313/37253 399/37253 497/37253 583/37253
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: 0/37253mkfs.ext3: Input/output error while writing out and closing file system
2025-07-06 16:42:02.882839886 ERROR: Failed to create ext3 filesystem on ReaR data partition /dev/sdd3
2025-07-06 16:42:02.890685265 Exiting rear format (PID 112008) and its descendant processes ...
2025-07-06 16:42:02.941505395 rear,112008 ./usr/sbin/rear format /dev/sdd
`-rear,1487379 ./usr/sbin/rear format /dev/sdd
`-pstree,1487380 -Aplau 112008
2025-07-06 16:42:02.972748734 Running exit tasks
2025-07-06 16:42:02.977345640 Finished rear format in 16996 seconds
2025-07-06 16:42:02.980324076 Removing build area /var/tmp/rear.AnWeQjZuDF3AWVt
2025-07-06 16:42:02.987270456 End of program 'rear' reached
