Hi, >> I've reported it to upstream on Friday already: >> >> >> >> https://lore.kernel.org/regressions/18f34d636390454180240e6a61af9...@kumkeo.de/T/#u >> >> >> but I should have appended that information to the bug - thanks for the >> nudge. No replies so far... > >There is still no feedback. But in the original bug report you had vbox >related modules loaded. Can you reproduce the problem without these?
Yes: kkcli1583:~> uname -a Linux kkcli1583 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux kkcli1583:~> lsmod | grep vbox kkcli1583:~> ... CRASH_REPORTING=1 -DEL3_EXCEPTION_HANDLING=0 -DSDEI_SUPPORT=0 -DALLOW_RO_XLAT_TABLES=0 -DAMU_RESTRICT_COUNTERS=0 -DARM_ARCH_MAJOR=8 -DARM_ARCH_MINOR=0 -DARM_IO_IN_DTB=0 -DBL2_AT_EL3=0 -DBL2_ENABLE_SP_LOAD=0 -DBL2_INV_DCACHE=1 -DBL2_IN_XIP_MEM=0 -DCOLD_BOOT_SINGLE_CPU=0 -DCOT_DESC_IN_DTB=0 -DCTX_INCLUDE_AARCH32_REGS=1 -DCTX_INCLUDE_EL2_REGS=0 -DCTX_INCLUDE_FPREGS=0 -DCTX_INCLUDE_MTE_REGS=0 -DCTX_INCLUDE_NEVE_REGS=0 -DCTX_INCLUDE_PAUTH_REGS=0 -DDECRYPTION_SUPPORT_none -DDISABLE_MTPMU=0 -DEL3_EXCEPTION_HANDLING=0 -DENABLE_AMU=0 -DENABLE_AMU_AUXILIARY_COUNTERS=0 -DENABLE_AMU_FCONF=0 -DENABLE_ASSERTIONS=0 -DENABLE_BTI=0 -DENABLE_FEAT_HCX=0 -DENABLE_FEAT_RNG=0 -DENABLE_FEAT_SB=0 -DENABLE_MPAM_FOR_LOWER_ELS=0 -DENABLE_MPMM=0 -DENABLE_MPMM_FCONF=0 -DENABLE_PAUTH=0 -DENABLE_PIE=0 -DENABLE_PMF=0 -DENABLE_PSCI_STAT=0 -DENABLE_RME=0 -DENABLE_RUNTIME_INSTRUMENTATION=0 -DENABLE_SME_FOR_NS=0 -DENABLE_SME_FOR_SWD=0 -DENABLE_SPE_FOR_LOWER_ELS=1 -DENABLE_SVE_FOR_NS=0 -DENABLE_SVE_FOR_SWD=0 -DENABLE_SYS_REG_TRACE_FOR_NS=0 -DENABLE_TRBE_FOR_NS=0 -DENABLE_TRF_FOR_NS=0 -DENCRYPT_BL31=0 -DENCRYPT_BL32=0 -DERRATA_SPECULATIVE_AT=0 -DERROR_DEPRECATED=0 -DFAULT_INJECTION_SUPPORT=0 -DGICV2_G0_FOR_EL3=1 -DHANDLE_EA_EL3_FIRST=0 -DHW_ASSISTED_COHERENCY=0 -DLOG_LEVEL=40 -DMEASURED_BOOT=0 -DNR_OF_FW_BANKS=2 -DNR_OF_IMAGES_IN_FW_BANK=1 -DNS_TIMER_SWITCH=0 -DPL011_GENERIC_UART=0 -DPLAT_zynqmp -DPROGRAMMABLE_RESET_ADDRESS=1 -DPSA_FWU_SUPPORT=0 -DPSCI_EXTENDED_STATE_ID=1 -DRAS_EXTENSION=0 -DRAS_TRAP_LOWER_EL_ERR_ACCESS=0 -DRECLAIM_INIT_CODE=0 -DRESET_TO_BL31=1 -DSDEI_IN_FCONF=0 -DSEC_INT_DESC_IN_FCONF=0 -DSEPARATE_CODE_AND_RODATA=1 -DSEPARATE_NOBITS_REGION=0 -DSPD_none -DSPIN_ON_BL1_EXIT=0 -DSPMD_SPM_AT_SEL2=1 -DSPM_MM=0 -DTRNG_SUPPORT=0 -DTRUSTED_BOARD_BOOT=0 -DUSE_COHERENT_MEM=1 -DUSE_DEBUGFS=0 -DUSE_ROMLIB=0 -DUSE_SP804_TIMER=0 -DUSE_SPINLOCK_CAS=0 -DUSE_TBBR_DEFS=1 -DWARMBOOT_ENABLE_DCACHE_EARLY=1 -Iinclude -Iinclude/arch/aarch64 -Iinclude/lib/cpus/aarch64 -Iinclude/lib/el3_runtime/aarch64 -Iinclude/plat/arm/common/ -Iinclude/plat/arm/common/aarch64/ -Iplat/xilinx/common/include/ -Iplat/xilinx/common/ipi_mailbox_service/ -Iplat/xilinx/zynqmp/include/ -Iplat/xilinx/zynqmp/pm_service/ -Iinclude/lib/libfdt -Iinclude/lib/libc -Iinclude/lib/libc/aarch64 -nostdinc -Werror -Wall -Wmissing-include-dirs -Wunused -Wdisabled-optimization -Wvla -Wshadow -Wno-unused-parameter -Wredundant-decls -Wunused-but-set-variable -Wmaybe-uninitialized -Wpacked-bitfield-compat -Wshift-overflow=2 -Wlogical-op -Wno-error=deprecated-declarations -Wno-error=cpp -march=armv8-a -mgeneral-regs-only -mstrict-align -mbranch-protection=none -ffunction-sections -fdata-sections -ffreestanding -fno-builtin -fno-common -Os -std=gnu99 -fno-PIE -fno-stack-protector -fno-jump-tables -DIMAGE_AT_EL3 -DIMAGE_BL31 -Wp,-MD,/build/arm-trusted-firmware-kk-2.6-2022-2-kk/build/zynqmp/release/bl31/generic_delay_timer.d -MT /build/arm-trusted-firmware-kk-2.6-2022-2-kk/build/zynqmp/release/bl31/generic_delay_timer.o -MP -c drivers/delay_timer/generic_delay_timer.c -o /build/arm-trusted-firmware-kk-2.6-2022-2-kk/build/zynqmp/release/bl31/generic_delay_timer.o make[2]: Leaving directory '/build/arm-trusted-firmware-kk-2.6-2022-2-kk' dh_auto_build: error: make -j16 "INSTALL=install --strip-program=true" V=1 DEBUG=0 PLAT=zynqmp ZYNQMP_CONSOLE=cadence RESET_TO_BL31=1 ZYNQMP_ATF_MEM_BASE=0x1FF00000 ZYNQMP_ATF_MEM_SIZE=0x100000 CRASH_REPORTING=1 LOG_LEVEL=40 bl31 returned exit code 2 make[1]: *** [debian/rules:21: override_dh_auto_build] Error 2 make[1]: Leaving directory '/build/arm-trusted-firmware-kk-2.6-2022-2-kk' make: *** [debian/rules:13: binary] Error 2 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 I: copying local configuration E: Failed autobuilding of package I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /var/cache/pbuilder/build/3382 and its subdirectories HTH Uli Mit freundlichen Grüßen / Kind regards Dipl.-Inform. Ulrich Teichert Senior Software Developer e.bs kumkeo GmbH Heidenkampsweg 82a 20097 Hamburg Germany T: +49 40 2846761-0 F: +49 40 2846761-99 ulrich.teich...@kumkeo.de www.kumkeo.de Amtsgericht Hamburg / Hamburg District Court, HRB 187712 Geschäftsführer / Managing Director: Michael Leitner; Günter Hagspiel
