Package: linux-image-2.6.16-1-686 Version: 2.6.16-12 Severity: normal My machine has a PATA Optorite DVD/CDROM RW optical drive and a SATA harddisk. When I run with a self-compiled vanilla kernel 2.6.14.6 (from kernel.org rather than from Debian), it recognizes both drives. When I run the Debian 2.6.16-1-686 precompiled kernel, it ignores the PATA Optorite drive.
Here is the output (from /var/log/syslog) when booting with self-compiled 2.6.14.6: Jun 1 18:48:20 faerun kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jun 1 18:48:20 faerun kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jun 1 18:48:20 faerun kernel: Probing IDE interface ide0... Jun 1 18:48:20 faerun kernel: hda: OPTORITEDVD RW DD0201, ATAPI CD/DVD-ROM drive Jun 1 18:48:20 faerun kernel: ide1: I/O resource 0x170-0x177 not free. Jun 1 18:48:20 faerun kernel: ide1: ports already in use, skipping probe Jun 1 18:48:20 faerun kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jun 1 18:48:20 faerun kernel: hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache Jun 1 18:48:20 faerun kernel: Uniform CD-ROM driver Revision: 3.20 Jun 1 18:48:20 faerun kernel: libata version 1.12 loaded. Jun 1 18:48:20 faerun kernel: ata_piix version 1.04 Jun 1 18:48:20 faerun kernel: ata_piix: combined mode detected Jun 1 18:48:20 faerun kernel: ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15 Jun 1 18:48:20 faerun kernel: ata1: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:207f Jun 1 18:48:20 faerun kernel: ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 Jun 1 18:48:20 faerun kernel: ata1: dev 0 configured for UDMA/133 Jun 1 18:48:20 faerun kernel: scsi0 : ata_piix Jun 1 18:48:20 faerun kernel: Vendor: ATA Model: WDC WD1600SD-01K Rev: 08.0 Jun 1 18:48:20 faerun kernel: Type: Direct-Access ANSI SCSI revision: 05 Here is the output when booting Debian's 2.6.16-1-686 percompiled kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ata_piix 0000:00:1f.2: combined mode detected (p=0, s=1) ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 USB Universal Host Controller Interface driver v2.3 ata1: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407ata1: dev 0 ATAPI, max UDMA/33 ata1: dev 0 configured for UDMA/33 scsi0 : ata_piix ata1(0): WARNING: ATAPI is disabled, device ignored. ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15 ata2: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:207fata2: dev 0 ATA-6, max UDMA/133, 312581808 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : ata_piix Vendor: ATA Model: WDC WD1600SD-01K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 Is there a way to get the Debian kernel to recognize my DVD/CDROM drive? -- System Information: Debian Release: testing/unstable APT prefers oldstable APT policy: (500, 'oldstable'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) (ignored: LC_ALL set to en_US) Versions of packages linux-image-2.6.16-1-686 depends on: ii initramfs-tools [linux-initra 0.60 tools for generating an initramfs ii module-init-tools 3.2.2-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.16-1-686 recommends: pn libc6-i686 <none> (no description available) -- debconf information: linux-image-2.6.16-1-686/preinst/initrd-2.6.16-1-686: linux-image-2.6.16-1-686/postinst/old-system-map-link-2.6.16-1-686: true linux-image-2.6.16-1-686/preinst/already-running-this-2.6.16-1-686: linux-image-2.6.16-1-686/preinst/overwriting-modules-2.6.16-1-686: true linux-image-2.6.16-1-686/postinst/old-initrd-link-2.6.16-1-686: true linux-image-2.6.16-1-686/preinst/abort-overwrite-2.6.16-1-686: linux-image-2.6.16-1-686/preinst/elilo-initrd-2.6.16-1-686: true linux-image-2.6.16-1-686/prerm/would-invalidate-boot-loader-2.6.16-1-686: true linux-image-2.6.16-1-686/postinst/bootloader-error-2.6.16-1-686: linux-image-2.6.16-1-686/postinst/create-kimage-link-2.6.16-1-686: true linux-image-2.6.16-1-686/preinst/lilo-has-ramdisk: linux-image-2.6.16-1-686/prerm/removing-running-kernel-2.6.16-1-686: true linux-image-2.6.16-1-686/postinst/old-dir-initrd-link-2.6.16-1-686: true linux-image-2.6.16-1-686/postinst/depmod-error-initrd-2.6.16-1-686: false linux-image-2.6.16-1-686/preinst/lilo-initrd-2.6.16-1-686: true linux-image-2.6.16-1-686/postinst/kimage-is-a-directory: linux-image-2.6.16-1-686/preinst/bootloader-initrd-2.6.16-1-686: true linux-image-2.6.16-1-686/postinst/depmod-error-2.6.16-1-686: false linux-image-2.6.16-1-686/preinst/failed-to-move-modules-2.6.16-1-686: linux-image-2.6.16-1-686/preinst/abort-install-2.6.16-1-686: linux-image-2.6.16-1-686/postinst/bootloader-test-error-2.6.16-1-686: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
