severity 1059922 important
thanks
> Dear Laurent Bigonville,
Hello Jörg,
> with version 2.8.0-7 an EATON UPS connected to a debian computer via
> USB was working in standalone mode as expected. The only change in the
> config files was in /etc/nut/ups.conf where I added the following lines:
>
> [Eaton]
> driver = usbhid-ups
> port = auto
> vendorid = 0463
> pollfreq = 30
>
> After the upgrade to version 2.8.1-1 the upsd daemon would fail to
> start. The output in /var/log/syslog is
>
> upsd[12132]: not listening on ::1 port 3493
> upsd[12132]: listening on 127.0.0.1 port 3493
> upsd[12132]: no listening interface available
>
> instead of
>
> upsd[12553]: listening on 127.0.0.1 port 3493
> upsd[12553]: not listening on ::1 port 3493
> upsd[12553]: Connected to UPS [Eaton]: usbhid-ups-Eaton
> upsd[12555]: Startup successful
>
> for the working version 2.8.0.
> Any ideas?
Could you please attach the other configuration files here (please check
for clear-text passwords)?
Do you have the loopback (127.0.0.1/::1) interface properly working?
I cannot reproduce this at home where I have also an EATON UPS
Kind regards,
Laurent Bigonville
