Package: installation-reports
Boot method: network
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/
arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
ftp://ftp2.jp.debian.org/
Date: 2006/May/28
Machine: Sotec Winbook
Processor: Celeron 400MHz
Memory: 128MB
Partitions: /dev/hda1 ext3 4040000 2752768 1082004 72% /
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (AGP disabled) (rev 03)
0000:00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph
128XD] (rev 01)
0000:00:04.0 Multimedia audio controller: ESS Technology ES1968 Maestro 2
0000:00:06.0 Communication controller: Agere Systems 56k WinModem (rev 01)
0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0a.0 CardBus bridge: Texas Instruments PCI1221
0000:00:0a.1 CardBus bridge: Texas Instruments PCI1221
:lspci -n
0000:00:00.0 0600: 8086:7192 (rev 03)
0000:00:02.0 0300: 10c8:0004 (rev 01)
0000:00:04.0 0401: 125d:1968
0000:00:06.0 0780: 11c1:0440 (rev 01)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:0a.0 0607: 104c:ac19
0000:00:0a.1 0607: 104c:ac19
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
1. An error message was displayed while configureing foomatic (? I'm
not very sure) environment saying
*** glibc detected *** double free or corruption (!prev): 0x08179528 ***
2.The Installer abnormally stopped while configureing packages
(I suspect the contradictive files in manpages-ja and xmanpages-ja).
After continueing installation (Grub installation), the system can
boot normally. But, some packages may not be correctly installed/
configured. (At least, xmanpages-ja is required for Japanese
environment but not installed)
3. printconf command cannot access to foomatic DB (perhaps, because of
the same reason of error 1.). message is shown as
# printconf
*** glibc detected *** double free or corruption (!prev): 0x08179528 ***
Unable to read printer database. Please ensure the "foomatic-db" package is
installed properly.
Fortunately, my printer is a postscript printer, and I can set it up
using similar data in hplp database.
4.Time setting is incorrect. The installer seems to automatically
set the timezone to Tokyo/Japan, and using UTC setting. In result,
the time is set to 9 hours advance to JST.
--
KOYAMA Teruo
mail: koyama.t[at]b-star.ne.jp
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
