Package: src:linux
Version: 6.4.4-3~bpo12+1
Severity: normal
File:
/usr/share/bug/linux-image-6.4.0-0.deb12.2-686-pae-unsigned/include-1cmdline
X-Debbugs-Cc: takashi.y...@nifty.ne.jp
I installed bookworm into my OLD PC and found this problem.
Shutdown and reboot does not work properly. It stops after
displaying:
[ xxxx.xxxxxx] system-shutdown[1]: Powering off.
or
[ xxxx.xxxxxx] system-shutdown[1]: Rebooting.
I also noticed that the another PC of similar generation works
even with linux-image-6.1.0-11-686-pae (DELL PowerEdge 1500SC).
Full screen image is like:
[ 290.821465] EXT4-fs (sda4): unmounting filesystem.
[ 291.185022] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 291.358289] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 291.368445] systemd-journald[211]: Received SIGTERM from PID i
(systemdeshutdow).
[ 291.406307] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 291.415836] systemd-shutdown[1]: Unmounting file systems.
[ 291.420449] (sd-remount)[505]: Remounting'/' read-only with options
'errors:remount-ro'.
[ 291.431524] EXT4-fs (sda12): re-mounted. Quota mode: none.
[ 291.439996] systemd-shutdown[1]: All filesystems unmounted.
[ 291.440097] systemd-shutdown[1]: Deactivating swaps.
[ 291.440423] systemd-shutdown[1]: All swaps deactivated.
[ 291.440477] systemd-shutdown[1]: Detaching loop devices.
[ 291.444822] systemd-shutdown[1]: All loop devices detached.
[ 291.444919] systemdeshutdown[1]: Stopping MD devices.
[ 291.445354] systemd-shutdown[1]: All MD devices stopped.
[ 291.445406] systemd-shutdown[1]: Detaching DM devices.
[ 291.445753] systemd-shutdown[1]: All DM devices detached.
[ 291.445801] systemdeshutdown[1]: All filesystems, swaps, loop devices, MD
devices and DM devices detached.
[ 291.459662] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 291.461906] systemdeshutdown[1]: Powering off.
First, this happens with linux-image-6.1.0-11-686-pae.
I tried various kernel versions and the results are as follows.
linux-image-5.19.0-0.deb11.2-686-pae 5.19.11-1~bpo11+1 : OK
linux-image-6.0.0-0.deb11.2-686-pae 6.0.3-1~bpo11+1 : OK
linux-image-6.1.0-0.deb11.5-686-pae 6.1.12-1~bpo11+1 : OK
linux-image-6.1.0-0.deb11.7-686-pae 6.1.20-2~bpo11+1 : OK
linux-image-6.1.0-10-686-pae 6.1.38-2 : NG
linux-image-6.1.0-11-686-pae 6.1.38-4 : NG
linux-image-6.4.0-0.deb12.2-686-pae-unsigned 6.4.4-3~bpo12+1 : NG
linux-image-6.4.0-2-686-pae 6.4.4-3 : NG
linux-image-6.5.0-0-686-pae-unsigned 6.5~rc6-1~exp1 : NG
OK: Works without the problem.
NG: Has the problem.
It seems that kernels built for bullseye do not have this issue.
Or maybe the kernel before 6.1.0-0 works.
Please let me know if further information is necessary.
-- Package-specific info:
** Version:
Linux version 6.4.0-0.deb12.2-686-pae (debian-ker...@lists.debian.org) (gcc-12
(Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP
PREEMPT_DYNAMIC Debian 6.4.4-3~bpo12+1 (2023-08-08)
** Command line:
BOOT_IMAGE=/vmlinuz-6.4.0-0.deb12.2-686-pae
root=UUID=fc774740-5be6-44f6-b87c-b6d8305d3680 ro quiet
** Tainted: DE (8320)
* kernel died recently, i.e. there was an OOPS or BUG
* unsigned module was loaded
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
Mother board: MSI MS6163 VER:1 (440BX chipset)
CPU: Intel(R) Celeron(TM) CPU 1400MHz
Graphics: Nvidia FX 5900XT
** Loaded modules:
binfmt_misc(E)
sil164(E)
nouveau(E)
ppdev(E)
snd_ymfpci(E+)
saa7134(E)
tveeprom(E)
snd_ac97_codec(E)
videobuf2_dma_sg(E)
videobuf2_memops(E)
ac97_bus(E)
videobuf2_v4l2(E)
snd_mpu401_uart(E)
snd_opl3_lib(E)
snd_hwdep(E)
gameport(E)
snd_rawmidi(E)
snd_seq_device(E)
videodev(E)
mxm_wmi(E)
snd_pcm(E)
snd_timer(E)
videobuf2_common(E)
drm_display_helper(E)
pcspkr(E)
snd(E)
mc(E)
cec(E)
soundcore(E)
rc_core(E)
drm_ttm_helper(E)
ttm(E)
drm_kms_helper(E)
i2c_algo_bit(E)
parport_pc(E)
video(E)
parport(E)
wmi(E)
joydev(E)
button(E)
evdev(E)
serio_raw(E)
sg(E)
loop(E)
fuse(E)
drm(E)
efi_pstore(E)
dm_mod(E)
dax(E)
configfs(E)
ip_tables(E)
x_tables(E)
autofs4(E)
ext4(E)
crc16(E)
mbcache(E)
jbd2(E)
crc32c_generic(E)
hid_logitech_hidpp(E)
hid_logitech_dj(E)
sd_mod(E)
t10_pi(E)
hid_generic(E)
usbhid(E)
hid(E)
crc64_rocksoft(E)
crc64(E)
crc_t10dif(E)
crct10dif_generic(E)
sr_mod(E)
crct10dif_common(E)
cdrom(E)
ata_generic(E)
ata_piix(E)
ohci_pci(E)
uhci_hcd(E)
ehci_pci(E)
ohci_hcd(E)
ehci_hcd(E)
libata(E)
psmouse(E)
usbcore(E)
scsi_mod(E)
e1000(E)
i2c_piix4(E)
scsi_common(E)
usb_common(E)
floppy(E)
fan(E)
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge [8086:7190] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x2
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: ec000000-edffffff [size=32M] [32-bit]
Prefetchable memory behind bridge: e0000000-e7ffffff [size=128M]
[32-bit]
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA
[8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01) (prog-if 80 [ISA Compatibility mode-only controller,
supports bus mastering])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:07.2 USB controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB
[8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel modules: i2c_piix4
00:0e.0 Multimedia audio controller [0401]: Yamaha Corporation YMF-744B [DS-1S
Audio Controller] [1073:0010] (rev 02)
Subsystem: Yamaha Corporation DS-XG PCI Audio CODEC [1073:0010]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ef040000 (32-bit, non-prefetchable) [size=32K]
Region 1: I/O ports at e400 [size=64]
Region 2: I/O ports at e800 [size=4]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: snd_ymfpci
00:10.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet
Controller [8086:100e] (rev 02)
Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:002e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ef020000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at ef000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at ec00 [size=64]
Expansion ROM at ee000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: e1000
Kernel modules: e1000
00:12.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video
Broadcast Decoder [1131:7130] (rev 01)
Subsystem: Philips Semiconductors SAA7130-based TV tuner card
[1131:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ef048000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: saa7134
Kernel modules: saa7134
00:14.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035]
(rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ef049000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:14.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035]
(rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at ef04a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:14.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller
[1033:00e0] (rev 02) (prog-if 20 [EHCI])
Subsystem: HaSoTec GmbH uPD72010x USB 2.0 Controller [0e55:2928]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at ef04b000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV35 [GeForce FX
5900XT] [10de:0332] (rev a1) (prog-if 00 [VGA controller])
Subsystem: LeadTek Research Inc. NV35 [GeForce FX 5900XT] [107d:2975]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x2
Kernel driver in use: nouveau
Kernel modules: nouveau
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 12.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 6.4.0-0.deb12.2-686-pae (SMP w/1 CPU thread; PREEMPT)
Kernel taint flags: TAINT_DIE, TAINT_UNSIGNED_MODULE
Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned recommends:
ii apparmor 3.0.8-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.06-13
pn linux-doc-6.4 <none>
Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20230210-5
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--
Takashi Yano <takashi.y...@nifty.ne.jp>
