Package: installation-reports
Boot method: <CD>
Image version: <debian-testing-amd64-netinst.iso>
Date: <Sun May 14 18:05:17 CDT 2006>
Machine: <Tyan S2865G2NR)>
Processor: AMD Opteron(tm) Processor 144
Memory: MemTotal: 1024068 kB
Partitions: <Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/md1 jfs 70570440 817892 69752548 2% /
tmpfs tmpfs 512032 0 512032 0% /dev/shm
tmpfs tmpfs 10240 684 9556 7% /dev
Disk /dev/sda: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8790 70605643+ fd Linux raid autodetect
/dev/sda2 8791 10011 9807682+ fd Linux raid autodetect
# cat /proc/mdstat
Personalities : [raid0] [raid1] [raid5]
md1 : active raid1 sda1[0] sdb1[1]
70605568 blocks [2/2] [UU]
md0 : active raid1 sda2[0] sdb2[1]
9807616 blocks [2/2] [UU]
unused devices: <none>
# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/md1 / jfs defaults,errors=remount-ro 0 1
/dev/md0 none swap sw 0 0
/dev/hdb /media/cdrom0 udf,iso9660 user,noauto 0 0
>
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Memory controller: nVidia Corporation: Unknown device 005e (rev a3)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 0050 (rev a3)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 005a (rev a2)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 005b (rev a3)
0000:00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev f2)
0000:00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev f3)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 0055 (rev f3)
0000:00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
0000:00:0a.0 Bridge: nVidia Corporation: Unknown device 0057 (rev a3)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:05.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 11)
# lspci -n
0000:00:00.0 0580: 10de:005e (rev a3)
0000:00:01.0 0601: 10de:0050 (rev a3)
0000:00:01.1 0c05: 10de:0052 (rev a2)
0000:00:02.0 0c03: 10de:005a (rev a2)
0000:00:02.1 0c03: 10de:005b (rev a3)
0000:00:06.0 0101: 10de:0053 (rev f2)
0000:00:07.0 0101: 10de:0054 (rev f3)
0000:00:08.0 0101: 10de:0055 (rev f3)
0000:00:09.0 0604: 10de:005c (rev a2)
0000:00:0a.0 0680: 10de:0057 (rev a3)
0000:00:0b.0 0604: 10de:005d (rev a3)
0000:00:0c.0 0604: 10de:005d (rev a3)
0000:00:0d.0 0604: 10de:005d (rev a3)
0000:00:0e.0 0604: 10de:005d (rev a3)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:05.0 0300: 1002:4752 (rev 27)
0000:04:00.0 0200: 14e4:1659 (rev 11)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [E]
Config network: [E]
Detect CD: [E]
Load installer modules: [E]
Detect hard drives: [E]
Partition hard drives: [E]
Create file systems: [E]
Mount partitions: [E]
Install base system: [E]
Install boot loader: [E]
Reboot: [E]
Comments/Problems:
<I did a sarge install on jfs on software RAID1. This had not worked on earlier
versions of the installer. The version I used had file dates May-13-06 (this
date should be part of the iso file name!!) There was a problem with the RAID -
it came out with the partitions mis mated - Might have been my error??
After running and installing a few packages the file system became corrupted
and was not rebootable.
Will run memtest and try to zero the supper blocks and start over.
>
----------------------------------------------------------------
Karl Schmidt EMail [EMAIL PROTECTED]
Transtronics, Inc. WEB http://xtronics.com
3209 West 9th Street Ph (785) 841-3089
Lawrence, KS 66049 FAX (785) 841-0434
There's many a bestseller that could have been prevented by a good teacher.
--Flannery O'Connor
----------------------------------------------------------------
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
