Package: src:linux
Version: 6.1.8-1
Severity: normal
X-Debbugs-Cc: e...@yojik.eu
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
trying to make an update
* What exactly did you do (or not do) that was effective (or
ineffective)?
sudo apt update && sudo apt upgrade
* What was the outcome of this action?
**********************************
Paramétrage de linux-image-6.1.0-3-amd64 (6.1.8-1) ...
I: /initrd.img is now a symlink to boot/initrd.img-6.1.0-3-amd64
/etc/kernel/postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-3-amd64:Sign command:
/lib/modules/6.1.0-3-amd64/build/scripts/sign-file
Binary /lib/modules/6.1.0-3-amd64/build/scripts/sign-file not found, modules
won't be signed
Error! Your kernel headers for kernel 6.1.0-3-amd64 cannot be found at
/lib/modules/6.1.0-3-amd64/build or /lib/modules/6.1.0-3-amd64/source.
Please install the linux-headers-6.1.0-3-amd64 package or use the
--kernelsourcedir option to tell DKMS where it's located.
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
failed!
run-parts: /etc/kernel/postinst.d/dkms exited with return code 11
dpkg: erreur de traitement du paquet linux-image-6.1.0-3-amd64 (--configure) :
installed linux-image-6.1.0-3-amd64 package post-installation script
subprocess returned error exit status 1
Paramétrage de linux-image-6.1.0-2-amd64 (6.1.7-1) ...
I: /initrd.img.old is now a symlink to boot/initrd.img-6.1.0-2-amd64
/etc/kernel/postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-2-amd64:Sign command:
/lib/modules/6.1.0-2-amd64/build/scripts/sign-file
Binary /lib/modules/6.1.0-2-amd64/build/scripts/sign-file not found, modules
won't be signed
Error! Your kernel headers for kernel 6.1.0-2-amd64 cannot be found at
/lib/modules/6.1.0-2-amd64/build or /lib/modules/6.1.0-2-amd64/source.
Please install the linux-headers-6.1.0-2-amd64 package or use the
--kernelsourcedir option to tell DKMS where it's located.
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
failed!
run-parts: /etc/kernel/postinst.d/dkms exited with return code 11
dpkg: erreur de traitement du paquet linux-image-6.1.0-2-amd64 (--configure) :
installed linux-image-6.1.0-2-amd64 package post-installation script
subprocess returned error exit status 1
dpkg: des problèmes de dépendances empêchent la configuration de linux-image-
amd64 :
linux-image-amd64 dépend de linux-image-6.1.0-3-amd64 (= 6.1.8-1) ;
cependant :
Le paquet linux-image-6.1.0-3-amd64 n'est pas encore configuré.
dpkg: erreur de traitement du paquet linux-image-amd64 (--configure) :
problèmes de dépendances - laissé non configuré
Des erreurs ont été rencontrées pendant l'exécution :
linux-image-6.1.0-3-amd64
linux-image-6.1.0-2-amd64
linux-image-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
**********************************
* What outcome did you expect instead?
a proper installation and configuration
*** End of the template - remove these template lines ***
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: Z370 AORUS Ultra Gaming
product_version: Default string
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: F6
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z370 AORUS Ultra Gaming-CF
board_version: x.x
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 8th Gen Core Processor Host
Bridge/DRAM Registers [8086:3ec2] (rev 07)
Subsystem: Gigabyte Technology Co., Ltd 8th Gen Core Processor Host
Bridge/DRAM Registers [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation 6th-10th Gen Core Processor PCIe
Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 6th-10th Gen Core Processor
PCIe Controller (x16) [1458:5000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 121
IOMMU group: 1
Bus: primary=00, secondary=01, subordinate=03, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: efa00000-efbfffff [size=2M] [32-bit]
Prefetchable memory behind bridge: d0000000-e01fffff [size=258M]
[32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Xeon E3-1200 v5/v6 /
E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model [8086:1911]
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v5/v6 / E3-1500 v5
/ 6th/7th/8th Gen Core Processor Gaussian Mixture Model [1458:5000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
IOMMU group: 2
Region 0: Memory at eff4e000 (64-bit, non-prefetchable) [disabled]
[size=4K]
Capabilities: <access denied>
00:14.0 USB controller [0c03]: Intel Corporation 200 Series/Z370 Chipset Family
USB 3.0 xHCI Controller [8086:a2af] (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd 200 Series/Z370 Chipset Family
USB 3.0 xHCI Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 135
IOMMU group: 3
Region 0: Memory at eff30000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 200 Series PCH CSME
HECI #1 [8086:a2ba]
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH CSME HECI
[1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 134
IOMMU group: 4
Region 0: Memory at eff4d000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation 200 Series PCH SATA
controller [AHCI mode] [8086:a282] (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH SATA controller
[AHCI mode] [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 136
IOMMU group: 5
Region 0: Memory at eff48000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at eff4c000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at eff4b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1b.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #17 [8086:a2e7] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
IOMMU group: 6
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.2 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #19 [8086:a2e9] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 123
IOMMU group: 7
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: efe00000-efefffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.4 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #21 [8086:a2eb] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 124
IOMMU group: 8
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: efd00000-efdfffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #1 [8086:a290] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 125
IOMMU group: 9
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #3 [8086:a292] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 126
IOMMU group: 10
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #5 [8086:a294] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
IOMMU group: 11
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #6 [8086:a295] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 128
IOMMU group: 12
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #7 [8086:a296] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 129
IOMMU group: 13
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #8 [8086:a297] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 130
IOMMU group: 14
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root
Port #9 [8086:a298] (rev f0) (prog-if 00 [Normal decode])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root
Port [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 131
IOMMU group: 15
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: efc00000-efcfffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Z370 Chipset LPC/eSPI Controller
[8086:a2c9]
Subsystem: Gigabyte Technology Co., Ltd Z370 Chipset LPC/eSPI
Controller [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 16
00:1f.2 Memory controller [0580]: Intel Corporation 200 Series/Z370 Chipset
Family Power Management Controller [8086:a2a1]
Subsystem: Gigabyte Technology Co., Ltd 200 Series/Z370 Chipset Family
Power Management Controller [1458:5001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 16
Region 0: Memory at eff44000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation 200 Series PCH HD Audio
[8086:a2f0]
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH HD Audio
[1458:a182]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 137
IOMMU group: 16
Region 0: Memory at eff40000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at eff20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation 200 Series/Z370 Chipset Family SMBus
Controller [8086:a2a3]
Subsystem: Gigabyte Technology Co., Ltd 200 Series/Z370 Chipset Family
SMBus Controller [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 16
Region 0: Memory at eff4a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2)
I219-V [8086:15b8]
Subsystem: Gigabyte Technology Co., Ltd Ethernet Connection (2) I219-V
[1458:e000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 174
IOMMU group: 17
Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL
Upstream Port of PCI Express Switch [1002:1478] (rev ca) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 132
IOMMU group: 1
Region 0: Memory at efb00000 (32-bit, non-prefetchable) [size=16K]
Bus: primary=01, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: efa00000-efafffff [size=1M] [32-bit]
Prefetchable memory behind bridge: d0000000-e01fffff [size=258M]
[32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
02:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL
Downstream Port of PCI Express Switch [1002:1479] (prog-if 00 [Normal decode])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream
Port of PCI Express Switch [1002:1479]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 133
IOMMU group: 1
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: efa00000-efafffff [size=1M] [32-bit]
Prefetchable memory behind bridge: d0000000-e01fffff [size=258M]
[32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1002:731f] (rev
ca) (prog-if 00 [VGA controller])
Subsystem: Sapphire Technology Limited Navi 10 [Radeon RX 5600 OEM/5600
XT / 5700/5700 XT] [1da2:e417]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 171
IOMMU group: 1
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at efa00000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu
03:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10
HDMI Audio [1002:ab38]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 HDMI Audio
[1002:ab38]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 173
IOMMU group: 1
Region 0: Memory at efaa0000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM2142/ASM3142 USB 3.1
Host Controller [1b21:2142] (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd ASM2142/ASM3142 USB 3.1 Host
Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
IOMMU group: 18
Region 0: Memory at efe00000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
06:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe
SSD Controller SM981/PM981/PM983 [144d:a808] (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd SSD 970 EVO [144d:a801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
IOMMU group: 19
Region 0: Memory at efd00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
0d:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe
SSD Controller SM981/PM981/PM983 [144d:a808] (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd SSD 970 EVO [144d:a801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
IOMMU group: 20
Region 0: Memory at efc00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA
Technology Corp. JMS578 SATA 6Gb/s
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 006: ID 1a86:7523 QinHeng Electronics CH340 serial converter
Bus 001 Device 003: ID 33fa:0001 USB2.0-BT
Bus 001 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 005: ID 046d:c542 Logitech, Inc. Wireless Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bookworm/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.1.0-1-amd64 (SMP w/12 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.1.0-3-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.1.0-3-amd64 recommends:
ii apparmor 3.0.8-2+b1
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.1.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.06-7
pn linux-doc-6.1 <none>
Versions of packages linux-image-6.1.0-3-amd64 is related to:
ii firmware-amd-graphics 20221214-5
ii firmware-atheros 20221214-5
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20221214-5
ii firmware-misc-nonfree 20221214-5
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20221214-5
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
