Dear Maintainers, I am using this crude workaround daily and it seems to work (as per upstream advice)
cat /etc/systemd/system/realtek-bug.service [Unit] Description=Realtek Bugfix After=network.target [Service] Type=oneshot ExecStart=/usr/bin/bash -c '/usr/bin/echo 0 > /sys/class/net/enp2s0/device/link/l1_1_aspm' ExecStart=/usr/bin/sleep 1 ExecStart=/usr/bin/bash -c '/usr/bin/echo 0 > /sys/class/net/enp2s0/device/link/l1_aspm' [Install] WantedBy=network.target obviously each user has to find out the /sys path to his/her realtek network device. On Fri, 2023-01-20 at 14:15 +0100, xevilstar wrote: > Package: linux-image-6.2.0-rc4 > Version: 6.2.0-rc4-2 > Severity: severe > File: realtek > X-Debbugs-Cc: vmxevils...@gmail.com > > Dear Mantainers, > > I am having an issue with my ethernet card. > It works when the system boots but after around a couple of hours it > disconnects. > I tried different ways to get it working without having to reboot but > nothing else seemed to work. > Even rebooting doesn't solve the problem since again, after a couple > of hours, it stops working again. > I have googled around and found that some people had this same > problem on older kernels but no solution seemed to apply to this rc > nor latest stable kernel versions. > I am probably missing something here. > The issue happened also with recent stable 6.1.7 and rc kernel > versions. > I am actually testing the latest 6.2-rc4 version. > > Following are some data I think might be useful but if you feel I > neglected to give enough informations and you need more please just > ask me. > > Here some informations about my system : > uname -a > Linux ghost 6.2.0-rc4 #2 SMP PREEMPT_DYNAMIC Tue Jan 17 13:35:46 CET > 2023 x86_64 GNU/Linux > > gcc --version > gcc (Debian 12.2.0-14) 12.2.0 > Copyright (C) 2022 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There > is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > PURPOSE. > > > /usr/src# lspci|grep -i net > 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 > 2.5GbE Controller (rev 05) > > description: Ethernet interface > product: RTL8125 2.5GbE Controller > vendor: Realtek Semiconductor Co., Ltd. > physical id: 0 > bus info: pci@0000:02:00.0 > logical name: enp2s0 > version: ff > serial: b0:25:aa:49:a5:3a > size: 1Gbit/s > capacity: 1Gbit/s > width: 32 bits > clock: 66MHz > capabilities: bus_master vga_palette cap_list ethernet physical tp > mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation > configuration: autonegotiation=on broadcast=yes driver=r8169 > driverversion=6.2.0-rc4 duplex=full firmware=rtl8125b-2_0.0.2 > 07/13/20 latency=255 link=yes maxlatency=255 mingnt=255 multicast=yes > port=twisted pair speed=1Gbit/s > > > > lsmod|grep r8169 > r8169 110592 0 > mdio_devres 16384 1 r8169 > libphy 200704 3 r8169,mdio_devres,realtek > > the firmware version I am using is linux-firmware-20221214.tar.gz > > > Here you can find what happens (dmesg -wT) > [Fri Jan 20 11:04:32 2023] userif-3: sent link up event. > > [Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: > rtl_chipcmd_cond == 1 (loop: 100, delay: 100). > [Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: > rtl_mac_ocp_e00e_cond == 1 (loop: 10, delay: 1000). > [Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: > rtl_chipcmd_cond == 1 (loop: 100, delay: 100). > [Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond > == 1 (loop: 100, delay: 10). > [Fri Jan 20 13:20:18 2023] r8169 0000:02:00.0 enp2s0: > rtl_mac_ocp_e00e_cond == 1 (loop: 10, delay: 1000). > > I would love to provide a patch of any kind but I am afraid I don't > have enough programming skills. > > Thanks in advance for your time. > > -- System Information: > Debian Release: bookworm/sid > APT prefers unstable > APT policy: (500, 'unstable'), (500, 'testing'), (1, > 'experimental') > Architecture: amd64 (x86_64) > Foreign Architectures: i386 > > Kernel: Linux 6.2.0-rc4 (SMP w/16 CPU threads; PREEMPT) > Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_WARN, > TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE > Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set > Shell: /bin/sh linked to /usr/bin/dash > Init: systemd (via /run/systemd/system) > LSM: AppArmor: enabled > > -- no debconf information
