Package: src:linux
Version: 6.1.4-1
Severity: normal

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?
did apt-get dist-upgrade
   * What exactly did you do (or not do) that was effective (or
     ineffective)?
   * What was the outcome of this action?
kernel modules fail to load
   * What outcome did you expect instead?
loaded modules
*** End of the template - remove these template lines ***


-- Package-specific info:
** Version:
Linux version 6.1.0-1-amd64 (debian-ker...@lists.debian.org) (gcc-12 (Debian 
12.2.0-13) 12.2.0, GNU ld (GNU Binutils for Debian) 2.39.90.20221231) #1 SMP 
PREEMPT_DYNAMIC Debian 6.1.4-1 (2023-01-07)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.1.0-1-amd64 
root=UUID=3c762dd1-13f5-421a-b367-803c2b3028bb ro quiet

** Tainted: OE (12288)
 * externally-built ("out-of-tree") module was loaded
 * unsigned module was loaded

** Kernel log:
[    5.646858] mc: Linux media interface: v0.10
[    5.689167] cfg80211: Loading compiled-in X.509 certificates for regulatory 
database
[    5.689462] cfg80211: Loaded X.509 cert 'b...@debian.org: 
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    5.689733] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com: 
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    5.690006] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.692460] platform regulatory.0: firmware: direct-loading firmware 
regulatory.db
[    5.694043] platform regulatory.0: firmware: direct-loading firmware 
regulatory.db.p7s
[    5.794526] snd_hda_intel 0000:01:00.1: Disabling MSI
[    5.794535] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.870107] kvm: Nested Virtualization enabled
[    5.870112] SVM: kvm: Nested Paging enabled
[    5.870121] SVM: LBR virtualization supported
[    5.871624] input: HDA NVidia HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[    5.871770] input: HDA NVidia HDMI/DP,pcm=7 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[    5.884044] MCE: In-kernel MCE decoding enabled.
[    5.888213] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: 
line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[    5.888219] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[    5.888221] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 
(0x1d/0x0/0x0/0x0/0x0)
[    5.888223] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[    5.888224] snd_hda_codec_via hdaudioC0D0:    dig-out=0x20/0x21
[    5.888226] snd_hda_codec_via hdaudioC0D0:    inputs:
[    5.888227] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
[    5.888229] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
[    5.888230] snd_hda_codec_via hdaudioC0D0:      Line=0x1b
[    5.899972] input: HDA ATI SB Rear Mic as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    5.900042] input: HDA ATI SB Front Mic as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    5.900115] input: HDA ATI SB Line as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    5.900178] input: HDA ATI SB Line Out Front as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    5.900239] input: HDA ATI SB Line Out Surround as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input16
[    5.900314] input: HDA ATI SB Line Out CLFE as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input17
[    5.900375] input: HDA ATI SB Line Out Side as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input18
[    5.900434] input: HDA ATI SB Front Headphone as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input19
[    5.905827] ath5k 0000:04:05.0: registered as 'phy0'
[    6.007801] usb 6-1: Warning! Unlikely big volume range (=4096), cval->res 
is probably wrong.
[    6.007816] usb 6-1: [11] FU [Sidetone Playback Volume] ch = 1, val = 
0/4096/1
[    6.066015] usbcore: registered new interface driver snd-usb-audio
[    6.068777] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Quota 
mode: none.
[    6.073984] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota 
mode: none.
[    6.081332] systemd-journald[276]: Received client request to flush runtime 
journal.
[    6.084964] EXT4-fs (sdd1): mounting ext2 file system using the ext4 
subsystem
[    6.091765] EXT4-fs (sdd1): mounted filesystem without journal. Quota mode: 
none.
[    6.093847] EXT4-fs (sde1): warning: maximal mount count reached, running 
e2fsck is recommended
[    6.116186] EXT4-fs (sde1): mounted filesystem with ordered data mode. Quota 
mode: none.
[    6.170439] audit: type=1400 audit(1674742016.448:2): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="lsb_release" pid=530 
comm="apparmor_parser"
[    6.175801] audit: type=1400 audit(1674742016.452:3): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=531 
comm="apparmor_parser"
[    6.178100] audit: type=1400 audit(1674742016.456:4): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=532 
comm="apparmor_parser"
[    6.182395] audit: type=1400 audit(1674742016.460:5): apparmor="STATUS" 
operation="profile_load" profile="unconfined" 
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=529 
comm="apparmor_parser"
[    6.182402] audit: type=1400 audit(1674742016.460:6): apparmor="STATUS" 
operation="profile_load" profile="unconfined" 
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" 
pid=529 comm="apparmor_parser"
[    6.183777] audit: type=1400 audit(1674742016.460:7): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=533 
comm="apparmor_parser"
[    6.183782] audit: type=1400 audit(1674742016.460:8): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" 
pid=533 comm="apparmor_parser"
[    6.188693] audit: type=1400 audit(1674742016.468:9): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="postgresql_akonadi" pid=534 
comm="apparmor_parser"
[    6.196113] audit: type=1400 audit(1674742016.472:10): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/bin/akonadiserver" 
pid=536 comm="apparmor_parser"
[    6.199719] audit: type=1400 audit(1674742016.476:11): apparmor="STATUS" 
operation="profile_load" profile="unconfined" 
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=535 
comm="apparmor_parser"
[    6.480483] random: crng init done
[    6.620512] ath: EEPROM regdomain: 0x0
[    6.620517] ath: EEPROM indicates default country code should be used
[    6.620518] ath: doing EEPROM country->regdmn map search
[    6.620519] ath: country maps to regdmn code: 0x3a
[    6.620520] ath: Country alpha2 being used: US
[    6.620521] ath: Regpair used: 0x3a
[    6.623983] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.624248] ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[    6.637262] ath5k 0000:04:05.0 wlp4s5: renamed from wlan0
[    7.096871] NET: Registered PF_QIPCRTR protocol family
[    7.194042] r8169 0000:03:00.0: firmware: direct-loading firmware 
rtl_nic/rtl8168d-2.fw
[    7.194735] RTL8211B Gigabit Ethernet r8169-0-300:00: attached PHY driver 
(mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[    7.237898] vboxdrv: loading out-of-tree module taints kernel.
[    7.238336] vboxdrv: module verification failed: signature and/or required 
key missing - tainting kernel
[    7.253919] vboxdrv: Found 4 processor cores
[    7.276757] vboxdrv: TSC mode is Invariant, tentative frequency 3214068538 Hz
[    7.276764] vboxdrv: Successfully loaded version 6.1.42 r155177 (interface 
0x00320000)
[    7.371302] r8169 0000:03:00.0 enp3s0: Link is Down
[    7.497545] VBoxNetFlt: Successfully started.
[    7.504257] VBoxNetAdp: Successfully started.
[    8.362995] wlp4s5: authenticate with bc:9f:e4:ca:e6:20
[    8.363015] wlp4s5: 80 MHz not supported, disabling VHT
[    8.367587] wlp4s5: send auth to bc:9f:e4:ca:e6:20 (try 1/3)
[    8.368447] wlp4s5: authenticated
[    8.372506] wlp4s5: associate with bc:9f:e4:ca:e6:20 (try 1/3)
[    8.374101] wlp4s5: RX AssocResp from bc:9f:e4:ca:e6:20 (capab=0x1431 
status=0 aid=2)
[    8.374222] wlp4s5: associated
[    8.408223] wlp4s5: Limiting TX power to 36 (36 - 0) dBm as advertised by 
bc:9f:e4:ca:e6:20
[    8.536738] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s5: link becomes ready
[   13.439188] kauditd_printk_skb: 22 callbacks suppressed
[   13.439199] audit: type=1400 audit(1674742023.716:34): apparmor="DENIED" 
operation="open" profile="/usr/sbin/cups-browsed" 
name="/proc/sys/net/ipv6/conf/all/disable_ipv6" pid=1035 comm="cups-browsed" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   24.173245] audit: type=1400 audit(1674742034.452:35): apparmor="DENIED" 
operation="open" profile="mariadbd_akonadi" name="/sys/devices/system/node/" 
pid=2035 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   24.260715] input: XP-PEN STYLUS as /devices/virtual/input/input20
[   24.260966] input: XP-PEN MOUSE as /devices/virtual/input/input21
[   24.261769] input: XP-PEN ERASER as /devices/virtual/input/input22
[   24.455306] audit: type=1400 audit(1674742034.732:36): apparmor="DENIED" 
operation="open" profile="mariadbd_akonadi" name="/sys/devices/system/node/" 
pid=2080 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   24.552445] audit: type=1400 audit(1674742034.828:37): apparmor="DENIED" 
operation="open" profile="mariadbd_akonadi" name="/sys/block/" pid=2080 
comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   76.197178] wlp4s5: disconnect from AP bc:9f:e4:ca:e6:20 for new auth to 
bc:9f:e4:bd:0e:60
[   76.241770] wlp4s5: authenticate with bc:9f:e4:bd:0e:60
[   76.241853] wlp4s5: 80 MHz not supported, disabling VHT
[   76.246486] wlp4s5: send auth to bc:9f:e4:bd:0e:60 (try 1/3)
[   76.249535] wlp4s5: authenticated
[   76.253090] wlp4s5: associate with bc:9f:e4:bd:0e:60 (try 1/3)
[   76.259573] wlp4s5: RX ReassocResp from bc:9f:e4:bd:0e:60 (capab=0x11 
status=0 aid=1)
[   76.259734] wlp4s5: associated
[   76.331756] wlp4s5: Limiting TX power to 36 (36 - 0) dBm as advertised by 
bc:9f:e4:bd:0e:60

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0904   
board_vendor: ASUSTeK Computer INC.
board_name: M4A785TD-M EVO
board_version: Rev X.0x

** Loaded modules:
tls
uinput
snd_seq_dummy
snd_hrtimer
snd_seq
ctr
ccm
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
qrtr
binfmt_misc
ath5k
snd_hda_codec_via
edac_mce_amd
ath
snd_hda_codec_generic
ledtrig_audio
snd_hda_codec_hdmi
kvm_amd
mac80211
snd_usb_audio
snd_hda_intel
ccp
snd_intel_dspcfg
rng_core
snd_intel_sdw_acpi
snd_usbmidi_lib
libarc4
snd_hda_codec
snd_rawmidi
kvm
snd_hda_core
snd_seq_device
cfg80211
mc
snd_hwdep
snd_pcm
irqbypass
wmi_bmof
k10temp
pcspkr
rfkill
sp5100_tco
snd_timer
snd
watchdog
soundcore
joydev
asus_atk0110
acpi_cpufreq
evdev
serio_raw
sg
msr
parport_pc
ppdev
lp
drm
parport
fuse
configfs
efi_pstore
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_generic
sd_mod
t10_pi
usbhid
crc64_rocksoft
crc64
crc_t10dif
crct10dif_generic
hid
sr_mod
cdrom
crct10dif_common
ahci
ata_generic
ohci_pci
libahci
sata_promise
pata_atiixp
libata
i2c_piix4
ehci_pci
firewire_ohci
ohci_hcd
ehci_hcd
r8169
realtek
usbcore
mdio_devres
scsi_mod
firewire_core
libphy
usb_common
scsi_common
crc_itu_t
wmi
button

** Network interface configuration:
*** /etc/network/interfaces:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state 
DOWN group default qlen 1000
    link/ether e0:cb:4e:26:dd:de brd ff:ff:ff:ff:ff:ff
3: wlp4s5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group 
default qlen 1000
    link/ether 16:b7:4d:d6:b2:96 brd ff:ff:ff:ff:ff:ff permaddr 
00:18:46:00:0b:23
    inet 10.55.3.8/18 brd 10.55.63.255 scope global dynamic noprefixroute wlp4s5
       valid_lft 540185sec preferred_lft 540185sec
    inet6 fe80::4b7d:378:c6a9:7f4c/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
    lo:    8868     102    0    0    0     0          0         0     8868     
102    0    0    0     0       0          0
enp3s0:       0       0    0    0    0     0          0         0        0      
 0    0    0    0     0       0          0
wlp4s5:  550270    2293    0    0    0     0          0         0   107220     
529    0    0    0     0       0          0


** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host 
Bridge [1022:9601]
        Subsystem: ASUSTeK Computer Inc. M4A785-M Mainboard [1043:83a2]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        NUMA node: 0
        Capabilities: [c4] HyperTransport: Slave or Primary Interface
                Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
                Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
<CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
                Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
DwFcInEn- LWO=16bit DwFcOutEn-
                Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
DwFcInEn- LWO=8bit DwFcOutEn-
                Revision ID: 3.00
                Link Frequency 0: [b]
                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
                Link Frequency 1: 200MHz
                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- 
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
                Prefetchable memory behind bridge Upper: 00-00
                Bus Number: 00
        Capabilities: [54] HyperTransport: UnitID Clumping
        Capabilities: [40] HyperTransport: Retry Mode
        Capabilities: [9c] HyperTransport: #1a
        Capabilities: [f8] HyperTransport: #1c

00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI 
bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
        Subsystem: ASUSTeK Computer Inc. RS780 PCI to PCI bridge (ext gfx port 
0) [1043:83a2]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 24
        NUMA node: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: c000-cfff [size=4K] [16-bit]
        Memory behind bridge: fd000000-fe8fffff [size=25M] [32-bit]
        Prefetchable memory behind bridge: f0000000-f9ffffff [size=160M] 
[32-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag+ RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit 
Latency L0s <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #2, PowerLimit 75W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCap: CRSVisible+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible+
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- 
NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee04004  Data: 0021
        Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. RS780 PCI to PCI 
bridge (ext gfx port 0) [1043:83a2]
        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=010 <?>
        Capabilities: [110 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: pcieport

00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI 
to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
        Subsystem: ASUSTeK Computer Inc. RS780/RS880 PCI to PCI bridge (PCIE 
port 3) [1043:83a2]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 25
        NUMA node: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: [disabled] [32-bit]
        Memory behind bridge: fe900000-fe9fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag+ RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #7, PowerLimit 25W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCap: CRSVisible+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible+
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- 
NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- 
EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee08004  Data: 0021
        Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. RS780/RS880 PCI to 
PCI bridge (PCIE port 3) [1043:83a2]
        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=010 <?>
        Capabilities: [110 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: pcieport

00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI 
to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
        Subsystem: ASUSTeK Computer Inc. RS780/RS880 PCI to PCI bridge (PCIE 
port 5) [1043:83a2]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 26
        NUMA node: 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: d000-dfff [size=4K] [16-bit]
        Memory behind bridge: fea00000-feafffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: fbf00000-fbffffff [size=1M] [32-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag+ RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #10, PowerLimit 25W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCap: CRSVisible+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible+
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- 
NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee01004  Data: 0021
        Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. RS780/RS880 PCI to 
PCI bridge (PCIE port 5) [1043:83a2]
        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=010 <?>
        Capabilities: [110 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 22
        NUMA node: 0
        Region 0: I/O ports at b000 [size=8]
        Region 1: I/O ports at a000 [size=4]
        Region 2: I/O ports at 9000 [size=8]
        Region 3: I/O ports at 8000 [size=4]
        Region 4: I/O ports at 7000 [size=16]
        Region 5: Memory at fcfffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] SATA HBA v1.0 InCfgSpace
        Kernel driver in use: ahci
        Kernel modules: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 
[1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        NUMA node: 0
        Region 0: Memory at fcffe000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB 
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. SB7x0 USB OHCI1 Controller [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        NUMA node: 0
        Region 0: Memory at fcffd000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB EHCI Controller 
[1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        NUMA node: 0
        Region 0: Memory at fcfff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3-
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 
[1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        NUMA node: 0
        Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB 
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. SB7x0 USB OHCI1 Controller [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        NUMA node: 0
        Region 0: Memory at fcffb000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB EHCI Controller 
[1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 19
        NUMA node: 0
        Region 0: Memory at fcfff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3-
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus 
Controller [1002:4385] (rev 3c)
        Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:8389]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        NUMA node: 0
        Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel modules: i2c_piix4, sp5100_tco

00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [ISA Compatibility 
mode controller, supports both channels switched to PCI native mode, supports 
bus mastering])
        Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 IDE Controller 
[1043:8389]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Interrupt: pin A routed to IRQ 16
        NUMA node: 0
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374
        Region 4: I/O ports at ff00 [size=16]
        Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Kernel driver in use: pata_atiixp
        Kernel modules: pata_atiixp, ata_generic

00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 
Azalia (Intel HDA) [1002:4383]
        Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:836c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        NUMA node: 0
        Region 0: Memory at fcff4000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
        Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 LPC host controller 
[1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        NUMA node: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to 
PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        NUMA node: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
        I/O behind bridge: e000-efff [size=4K] [16-bit]
        Memory behind bridge: feb00000-febfffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [32-bit]
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 
[1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 18
        NUMA node: 0
        Region 0: Memory at fcffa000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor HyperTransport Configuration [1022:1200]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        NUMA node: 0
        Capabilities: [80] HyperTransport: Host or Secondary Interface
                Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
<EOCErr- DUL-
                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
<CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
                Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
DwFcInEn- LWO=16bit DwFcOutEn-
                Revision ID: 3.00
                Link Frequency: [b]
                Link Error: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- 
ExtRS- UCnfE-

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor Address Map [1022:1201]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        NUMA node: 0

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor DRAM Controller [1022:1202]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        NUMA node: 0

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor Miscellaneous Control [1022:1203]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        NUMA node: 0
        Capabilities: [f0] Secure device <?>
        Kernel driver in use: k10temp
        Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h 
Processor Link Control [1022:1204]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        NUMA node: 0

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119 [GeForce GT 
610] [10de:104a] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: PNY GF119 [GeForce GT 610] [196e:104a]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 10
        NUMA node: 0
        Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at f0000000 (64-bit, prefetchable) [size=128M]
        Region 3: Memory at f8000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at cc00 [size=128]
        Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 <64us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 75W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <4us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [128 v1] Power Budgeting <?>
        Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=024 <?>
        Kernel modules: nvidia

01:00.1 Audio device [0403]: NVIDIA Corporation GF119 HDMI Audio Controller 
[10de:0e08] (rev a1)
        Subsystem: PNY GF119 HDMI Audio Controller [196e:104a]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 19
        NUMA node: 0
        Region 0: Memory at fe87c000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [60] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 
<64us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 75W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <4us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

02:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host 
Controller [197b:2380] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. IEEE 1394 Host Controller [1043:8313]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        NUMA node: 0
        Region 0: Memory at fe9ff800 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at fe9ff400 (32-bit, non-prefetchable) [size=128]
        Region 4: Memory at fe9ff000 (32-bit, non-prefetchable) [size=128]
        Region 5: Memory at fe9fec00 (32-bit, non-prefetchable) [size=128]
        Capabilities: [44] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME+
        Capabilities: [80] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 0W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq+ AuxPwr- 
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: fffffffc  Data: 0000
        Kernel driver in use: firewire_ohci
        Kernel modules: firewire_ohci

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
        Subsystem: ASUSTeK Computer Inc. M4A785/P7P55 Motherboard [1043:83a3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        NUMA node: 0
        Region 0: I/O ports at d800 [size=256]
        Region 2: Memory at fbfff000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at fbff8000 (64-bit, prefetchable) [size=16K]
        Expansion ROM at feaf0000 [disabled] [size=64K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v2) Endpoint, MSI 01
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 25W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <512ns, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+ 
NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- TPHComp- ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- 
EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [ac] MSI-X: Enable+ Count=4 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [cc] Vital Product Data
                Not readable
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- 
ECRCChkCap+ ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
        Kernel driver in use: r8169
        Kernel modules: r8169

04:05.0 Ethernet controller [0200]: Qualcomm Atheros AR5212/5213/2414 Wireless 
Network Adapter [168c:0013] (rev 01)
        Subsystem: Qualcomm Atheros EZ Connect g 802.11g 108Mbps Wireless PCI 
Adapter [168c:1051]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        NUMA node: 0
        Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
        Kernel driver in use: ath5k
        Kernel modules: ath5k

04:06.0 Mass storage controller [0180]: Promise Technology, Inc. PDC40718 (SATA 
300 TX4) [105a:3d17] (rev 02)
        Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) [105a:3d17]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 21
        NUMA node: 0
        Region 0: I/O ports at ec00 [size=128]
        Region 2: I/O ports at e800 [size=256]
        Region 3: Memory at febef000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at febc0000 (32-bit, non-prefetchable) [size=128K]
        Expansion ROM at febb0000 [disabled] [size=32K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: sata_promise
        Kernel modules: sata_promise


** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 046d:0a37 Logitech, Inc. USB Headset H540
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 28bd:080a XP-Pen 11.6 inch PenDisplay
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 6.1.0-1-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.1.0-1-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142
ii  kmod                                    30+20221128-1
ii  linux-base                              4.9

Versions of packages linux-image-6.1.0-1-amd64 recommends:
ii  apparmor             3.0.8-2
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-6.1.0-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.06-7
pn  linux-doc-6.1           <none>

Versions of packages linux-image-6.1.0-1-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
ii  firmware-misc-nonfree     20221214-3
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20221214-3
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Reply via email to