Package: installation-reports INSTALL REPORT
Debian-installer-version: 03 May 2006 ftp://ftp.citylink.co.nz/debian/dists/Debian3.1r2/main/installer-i386/20050305/images/netboot/mini.iso uname -a: Linux helium.locallan 2.4.32 #1 Wed May 10 14:43:13 NZST 2006 i686 GNU/Linux <- source downloaded from kernel.org and custom compiled the "Debian" way Date: 09 May 2006 Method: Bootable CDROM netboot/mini.iso & FTP from ftp.citylink.co.nz Machine: HP D530 SFF Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz Memory: 512mb DDR 333 Root Device: IDE /dev/hda Disk /dev/hda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 34 273073+ 83 Linux /dev/hda2 35 14593 116945167+ 5 Extended /dev/hda5 35 642 4883728+ 83 Linux /dev/hda6 643 1007 2931831 83 Linux /dev/hda7 1008 1197 1526143+ 82 Linux swap / Solaris /dev/hda8 1198 1246 393561 83 Linux /dev/hda9 1247 14593 107209746 83 Linux Filesystem Size Used Avail Use% Mounted on /dev/hda1 250M 57M 180M 24% / (EXT3) tmpfs 249M 0 249M 0% /dev/shm /dev/hda9 103G 3.5M 103G 1% /home (XFS) /dev/hda8 380M 272K 380M 1% /tmp (XFS) /dev/hda5 4.7G 751M 4.0G 16% /usr (XFS) /dev/hda6 2.8G 99M 2.7G 4% /var (XFS) Output of lspci and lspci -n: lspci 0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) 0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 0000:05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03) 0000:05:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) lspci -n 0000:00:00.0 0600: 8086:2570 (rev 02) 0000:00:02.0 0300: 8086:2572 (rev 02) 0000:00:1d.0 0c03: 8086:24d2 (rev 02) 0000:00:1d.1 0c03: 8086:24d4 (rev 02) 0000:00:1d.2 0c03: 8086:24d7 (rev 02) 0000:00:1d.7 0c03: 8086:24dd (rev 02) 0000:00:1e.0 0604: 8086:244e (rev c2) 0000:00:1f.0 0601: 8086:24d0 (rev 02) 0000:00:1f.1 0101: 8086:24db (rev 02) 0000:00:1f.2 0101: 8086:24d1 (rev 02) 0000:00:1f.5 0401: 8086:24d5 (rev 02) 0000:05:02.0 0200: 14e4:1696 (rev 03) 0000:05:09.0 0200: 10b7:9200 (rev 78) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Trouble free install. network configuration automatically tries DHCP, would be nice if it asked you to try DHCP or manual - even thou I have DHCP on the LAN I installed the box with, I have to Go Back and manually configure the Gateway to a different one to get a direct route out to the internet. I use XFS for my filesystems because its simply better than ext3, maybe the installer could offer some basic information on each FS Getting a 2.6 Kernel to work with Sarge is not a simple process, I either have module problems, or kernel panic's on boot. I have stuck with the most recent 2.4 kernel, this was a breeze to configure, compile and install. Default kernel has a lot of stuff enabled that I just dont and wont ever need. Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED]
