Package: smartmontools Version: 7.3-1 Severity: normal X-Debbugs-Cc: konomikit...@gmail.com
Dear Maintainer, I get the following error for a drive I previous had connected to my computer: ``` This message was generated by the smartd daemon running on: host name: debian DNS domain: workgroup The following warning/error was logged by the smartd daemon: Device: /dev/sdb [SAT], Read SMART Self-Test Log Failed Device info: TOSHIBA MQ04UBB400, S/N:000000000, WWN:0-000000-000000000, FW:JS000U, 4.00 TB For details see host's SYSLOG. ``` You can also use the smartctl utility for further investigation. The original message about this issue was sent at Sun Jun 26 15:29:02 2022 AEST Another message will be sent in 24 hours if the problem persists. ``` Checking the journal shows that the current drive is not a TOSHIBA MQ04UBB400 but is actually a TOSHIBA USB DRV: ``` Jun 27 16:55:44 debian kernel: scsi 9:0:0:0: Direct-Access TOSHIBA TOSHIBA USB DRV PMAP PQ: 0 ANSI: 4 Jun 27 16:55:44 debian kernel: sd 9:0:0:0: Attached scsi generic sg1 type 0 Jun 27 16:55:45 debian kernel: sd 9:0:0:0: [sdb] 7570752 512-byte logical blocks: (3.88 GB/3.61 GiB) Jun 27 16:55:45 debian kernel: sd 9:0:0:0: [sdb] Write Protect is off Jun 27 16:55:45 debian kernel: sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00 Jun 27 16:55:45 debian kernel: sd 9:0:0:0: [sdb] No Caching mode page found Jun 27 16:55:45 debian kernel: sd 9:0:0:0: [sdb] Assuming drive cache: write through Jun 27 16:55:45 debian kernel: sdb: sdb1 sdb2 Jun 27 16:55:45 debian kernel: sd 9:0:0:0: [sdb] Attached SCSI removable disk ``` Here is the smartd portion of the log: ``` Jun 27 16:59:03 debian smartd[1069]: Device: /dev/sdb [SAT], reconnected ATA device Jun 27 16:59:03 debian smartd[1069]: Device: /dev/sdb [SAT], failed to read SMART Attribute Data Jun 27 16:59:03 debian smartd[1069]: Sending warning via /usr/share/smartmontools/smartd-runner to root ... Jun 27 16:59:03 debian smartd[1069]: Warning via /usr/share/smartmontools/smartd-runner to root: successful Jun 27 16:59:03 debian smartd[1069]: Device: /dev/sdb [SAT], Read SMART Self Test Log Failed Jun 27 16:59:03 debian smartd[1069]: Sending warning via /usr/share/smartmontools/smartd-runner to root ... Jun 27 16:59:03 debian smartd[1069]: Warning via /usr/share/smartmontools/smartd-runner to root: successful Jun 27 16:59:03 debian smartd[1069]: Device: /dev/sdb [SAT], Read Summary SMART Error Log failed Jun 27 16:59:03 debian smartd[1069]: Sending warning via /usr/share/smartmontools/smartd-runner to root ... Jun 27 16:59:03 debian smartd[1069]: Warning via /usr/share/smartmontools/smartd-runner to root: successful ``` -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.18.0-2-amd64 (SMP w/12 CPU threads; PREEMPT) Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8), LANGUAGE=en_AU:en Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages smartmontools depends on: ii debianutils 5.7-0.2 ii libc6 2.33-7 ii libcap-ng0 0.8.3-1 ii libgcc-s1 12.1.0-4 ii libselinux1 3.4-1 ii libstdc++6 12.1.0-4 ii libsystemd0 251.2-6 ii lsb-base 11.2 smartmontools recommends no packages. Versions of packages smartmontools suggests: ii bsd-mailx [mailx] 8.1.2-0.20220412cvs-1 ii curl 7.83.1-2 ii gpg 2.2.35-2 ii gsmartcontrol 1.1.4-1 ii smart-notifier 0.28-8 ii wget 1.21.3-1+b2 -- no debconf information
