Control: found -1 0.4.8-2 First I'll describe what I tried to do and I'll attach the console output (as it's rather long), so you can see what exactly I did.
I'm setting up a Rock64 device (arm64) cleanly with pipewire (so no PA which my 'soundserver' device was previously running), so I installed that and with it came pipewire-media-session as default recommended option of pipewire-bin. Through the #pipewire IRC channel I understood that pipewire-media-session is 'soon' to be actually deprecated with the release of wireplumber 0.4.8, so I figured I'd best switch now as I still need to setup/configure the device. That's when I ran into this issue. It didn't seem to be marked as a fatal flaw, so it appears that it concluded the install ... but in what exact state it is in ... I do not know. That device has 'bookworm' configured as default release, but sid is also available. As I wanted the 0.4.8-2 version, I then upgraded wireplumber to the sid version, which ones again produced the error of this bug report. It however did not also upgrade libwireplumber-0.4-0, which I expect it should? IOW: should there be a (more) tight version dependency between those? As I didn't like the unknown state that device was in wrt pipewire/ wireplumber, I purged both packages with the plan to then install pipewire and wireplumber together (explicitly), so it would not install pipewire-media-session and I expected that I would not run into this issue. That turned out to be an incorrect expectation as the previous purge didn't clean up things in /etc/systemd/user/ which still contains 3 symlinks which point to /dev/null and one link which points to /usr/lib/systemd/user/ pipewire-media-session.service ... which doesn't exist (anymore). There's also a /etc/systemd/user/pipewire.service.wants/ directory, which contains the same link to that non-existing file and a link to /usr/lib/systemd/user/wireplumber.service which also didn't exist anymore (after another purge, in this case of both pipewire and wireplumber) AFAIK a purge should cleaned it all up and 'aptitude install wireplumber pipewire' should've succeeded (cleanly), but it did not. I think the priority of this bug should be increased to possibly RC level as otherwise many more systems will end up with a 'broken' pipewire/wireplumber/ pipewire-media-session configuration which will make it more difficult to 'recover' from. And if I did understand correctly that with wireplumber 0.4.8 it should actually replace pipewire-media-session, it may also be a good idea to reverse the optional recommends so that wireplumber does get installed by default now. Cheers, Diederik
root@cs03:~# aptitude install wireplumber
The following NEW packages will be installed:
liblua5.3-0{a} libwireplumber-0.4-0{a} wireplumber
0 packages upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 360 kB of archives. After unpacking 1,754 kB will be used.
The following packages have unmet dependencies:
pipewire-media-session : Conflicts: wireplumber but 0.4.7-1 is to be installed
The following actions will resolve these dependencies:
Remove the following packages:
1) pipewire-media-session [0.4.1-2 (now, testing, unstable)]
Accept this solution? [Y/n/q/?]
The following NEW packages will be installed:
liblua5.3-0{a} libwireplumber-0.4-0{a} wireplumber
The following packages will be REMOVED:
pipewire-media-session{a}
0 packages upgraded, 3 newly installed, 1 to remove and 0 not upgraded.
Need to get 360 kB of archives. After unpacking 843 kB will be used.
Do you want to continue? [Y/n/?]
Get: 1 http://deb.debian.org/debian bookworm/main arm64 liblua5.3-0 arm64
5.3.6-1 [113 kB]
Get: 2 http://deb.debian.org/debian bookworm/main arm64 libwireplumber-0.4-0
arm64 0.4.7-1 [200 kB]
Get: 3 http://deb.debian.org/debian bookworm/main arm64 wireplumber arm64
0.4.7-1 [46.7 kB]
Fetched 360 kB in 0s (1,407 kB/s)
(Reading database ... 35418 files and directories currently installed.)
Removing pipewire-media-session (0.4.1-2) ...
Selecting previously unselected package liblua5.3-0:arm64.
(Reading database ... 35355 files and directories currently installed.)
Preparing to unpack .../liblua5.3-0_5.3.6-1_arm64.deb ...
Unpacking liblua5.3-0:arm64 (5.3.6-1) ...
Selecting previously unselected package libwireplumber-0.4-0:arm64.
Preparing to unpack .../libwireplumber-0.4-0_0.4.7-1_arm64.deb ...
Unpacking libwireplumber-0.4-0:arm64 (0.4.7-1) ...
Selecting previously unselected package wireplumber.
Preparing to unpack .../wireplumber_0.4.7-1_arm64.deb ...
Unpacking wireplumber (0.4.7-1) ...
Setting up liblua5.3-0:arm64 (5.3.6-1) ...
Setting up libwireplumber-0.4-0:arm64 (0.4.7-1) ...
Setting up wireplumber (0.4.7-1) ...
Failed to preset unit, file /etc/systemd/user/pipewire-session-manager.service
already exists and is a symlink to
/usr/lib/systemd/user/pipewire-media-session.service.
Created symlink /etc/systemd/user/pipewire.service.wants/wireplumber.service →
/usr/lib/systemd/user/wireplumber.service.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on
wireplumber.service: No such file or directory
Processing triggers for libc-bin (2.33-5) ...
[master 23fa562] committing changes in /etc made by "aptitude install
wireplumber"
2 files changed, 2 insertions(+)
create mode 120000 systemd/user/pipewire-media-session.service
create mode 120000 systemd/user/pipewire.service.wants/wireplumber.service
=================================================================================
root@cs03:~# aptitude versions wireplumber
i 0.4.7-1 testing
990
p 0.4.8-2 unstable
500
root@cs03:~# aptitude safe-upgrade wireplumber -t sid
The following packages will be upgraded:
wireplumber
1 packages upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
Need to get 59.5 kB of archives. After unpacking 31.7 kB will be used.
Do you want to continue? [Y/n/?]
Get: 1 http://deb.debian.org/debian sid/main arm64 wireplumber arm64 0.4.8-2
[59.5 kB]
Fetched 59.5 kB in 0s (323 kB/s)
(Reading database ... 37468 files and directories currently installed.)
Preparing to unpack .../wireplumber_0.4.8-2_arm64.deb ...
Unpacking wireplumber (0.4.8-2) over (0.4.7-1) ...
Setting up wireplumber (0.4.8-2) ...
Failed to preset unit, file /etc/systemd/user/pipewire-session-manager.service
already exists and is a symlink to
/usr/lib/systemd/user/pipewire-media-session.service.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on
wireplumber.service: No such file or directory
Current status: 5 (-1) upgradable.
root@cs03:~# aptitude safe-upgrade libwireplumber-0.4-0 -t sid
The following packages will be upgraded:
libwireplumber-0.4-0
1 packages upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
Need to get 217 kB of archives. After unpacking 92.2 kB will be used.
Do you want to continue? [Y/n/?]
Get: 1 http://deb.debian.org/debian sid/main arm64 libwireplumber-0.4-0 arm64
0.4.8-2 [217 kB]
Fetched 217 kB in 0s (1,076 kB/s)
(Reading database ... 37471 files and directories currently installed.)
Preparing to unpack .../libwireplumber-0.4-0_0.4.8-2_arm64.deb ...
Unpacking libwireplumber-0.4-0:arm64 (0.4.8-2) over (0.4.7-1) ...
Setting up libwireplumber-0.4-0:arm64 (0.4.8-2) ...
Processing triggers for libc-bin (2.33-5) ...
Current status: 4 (-1) upgradable.
root@cs03:~#
=================================================================================
root@cs03:~# aptitude purge ~iwireplumber
The following packages will be REMOVED:
liblua5.3-0{u} libwireplumber-0.4-0{pu} wireplumber{p}
0 packages upgraded, 0 newly installed, 3 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 1,878 kB will be freed.
Do you want to continue? [Y/n/?]
(Reading database ... 37471 files and directories currently installed.)
Removing wireplumber (0.4.8-2) ...
Removing libwireplumber-0.4-0:arm64 (0.4.8-2) ...
Removing liblua5.3-0:arm64 (5.3.6-1) ...
Processing triggers for libc-bin (2.33-5) ...
(Reading database ... 37382 files and directories currently installed.)
Purging configuration files for wireplumber (0.4.8-2) ...
root@cs03:~# aptitude purge ~ipipewire
The following packages will be REMOVED:
libcanberra0{u} liblilv-0-0{u} libltdl7{u} libpipewire-0.3-0{p}
libpipewire-0.3-common{p} libpipewire-0.3-modules{pu} libserd-0-0{u}
libsord-0-0{u}
libspa-0.2-modules{u} libsratom-0-0{u} libwebrtc-audio-processing1{u}
pipewire{p} pipewire-bin{pu} pipewire-pulse{p} rtkit{u}
sound-theme-freedesktop{u}
0 packages upgraded, 0 newly installed, 16 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 10.2 MB will be freed.
The following packages have unmet dependencies:
mpd : Depends: libpipewire-0.3-0 (>= 0.3.38) but it is not going to be
installed
The following actions will resolve these dependencies:
Remove the following packages:
1) mpd [0.23.5-1+b1 (now, testing, unstable)]
Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) libpipewire-0.3-0 [0.3.45-1 (now, testing, unstable)]
2) libspa-0.2-modules [0.3.45-1 (now, testing, unstable)]
Leave the following dependencies unresolved:
3) libpipewire-0.3-0 recommends pipewire (= 0.3.45-1)
4) libpipewire-0.3-0 recommends libpipewire-0.3-common
Accept this solution? [Y/n/q/?]
The following packages will be REMOVED:
libcanberra0{u} liblilv-0-0{u} libltdl7{u} libpipewire-0.3-common{p}
libpipewire-0.3-modules{pu} libserd-0-0{u} libsord-0-0{u} libsratom-0-0{u}
libwebrtc-audio-processing1{u} pipewire{p} pipewire-bin{pu} pipewire-pulse{p}
rtkit{u} sound-theme-freedesktop{u}
0 packages upgraded, 0 newly installed, 14 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 6,962 kB will be freed.
Do you want to continue? [Y/n/?]
(Reading database ... 37382 files and directories currently installed.)
Removing pipewire-pulse (0.3.45-1) ...
Removing pipewire:arm64 (0.3.45-1) ...
Removing pipewire-bin (0.3.45-1) ...
Removing libpipewire-0.3-modules:arm64 (0.3.45-1) ...
Removing libcanberra0:arm64 (0.30-8) ...
Removing liblilv-0-0:arm64 (0.24.12-2) ...
Removing libltdl7:arm64 (2.4.6-15) ...
Removing libpipewire-0.3-common (0.3.45-1) ...
Removing libsratom-0-0:arm64 (0.6.8-1) ...
Removing libsord-0-0:arm64 (0.16.8-2) ...
Removing libserd-0-0:arm64 (0.30.10-2) ...
Removing libwebrtc-audio-processing1:arm64 (0.3-1+b1) ...
Removing rtkit (0.13-4) ...
Removing sound-theme-freedesktop (0.8-2) ...
Processing triggers for man-db (2.10.0-2) ...
Processing triggers for dbus (1.12.20-3) ...
Processing triggers for libc-bin (2.33-5) ...
(Reading database ... 37057 files and directories currently installed.)
Purging configuration files for pipewire-bin (0.3.45-1) ...
Purging configuration files for pipewire-pulse (0.3.45-1) ...
Purging configuration files for pipewire:arm64 (0.3.45-1) ...
[master 82d2866] committing changes in /etc made by "aptitude purge ~ipipewire"
6 files changed, 1 insertion(+), 5 deletions(-)
create mode 120000 systemd/system/rtkit-daemon.service
delete mode 120000 systemd/user/default.target.wants/pipewire-pulse.service
delete mode 120000 systemd/user/default.target.wants/pipewire.service
delete mode 120000 systemd/user/sockets.target.wants/pipewire-pulse.socket
delete mode 120000 systemd/user/sockets.target.wants/pipewire.socket
root@cs03:~# aptitude search ~b
root@cs03:~# reboot
root@cs03:~# Connection to cs03 closed by remote host.
Connection to cs03 closed.
diederik@prancing-pony:~$ ssh cs03
Linux cs03 5.15.0-3-rt-arm64 #1 SMP PREEMPT_RT Debian 5.15.15-2 (2022-01-30)
aarch64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Feb 10 21:36:33 2022 from 192.168.2.206
Initialising new SSH agent... succeeded
diederik@cs03:~$ su -l
Password:
root@cs03:~# aptitude install wireplumber pipewire
The following NEW packages will be installed:
libcanberra0{a} liblilv-0-0{a} libltdl7{a} liblua5.3-0{a}
libpipewire-0.3-modules{a} libserd-0-0{a} libsord-0-0{a} libsratom-0-0{a}
libwebrtc-audio-processing1{a}
libwireplumber-0.4-0{a} pipewire pipewire-bin{a} pipewire-pulse{a} rtkit{a}
sound-theme-freedesktop{a} wireplumber
0 packages upgraded, 16 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/2,313 kB of archives. After unpacking 8,182 kB will be used.
Do you want to continue? [Y/n/?] n
Abort.
root@cs03:~# aptitude install wireplumber pipewire -t sid
The following NEW packages will be installed:
libcanberra0{a} liblilv-0-0{a} libltdl7{a} liblua5.3-0{a}
libpipewire-0.3-modules{a} libserd-0-0{a} libsord-0-0{a} libsratom-0-0{a}
libwebrtc-audio-processing1{a}
libwireplumber-0.4-0{a} pipewire pipewire-bin{a} pipewire-pulse{a} rtkit{a}
sound-theme-freedesktop{a} wireplumber
0 packages upgraded, 16 newly installed, 0 to remove and 6 not upgraded.
Need to get 0 B/2,343 kB of archives. After unpacking 8,306 kB will be used.
Do you want to continue? [Y/n/?]
Selecting previously unselected package libltdl7:arm64.
(Reading database ... 37086 files and directories currently installed.)
Preparing to unpack .../00-libltdl7_2.4.6-15_arm64.deb ...
Unpacking libltdl7:arm64 (2.4.6-15) ...
Selecting previously unselected package sound-theme-freedesktop.
Preparing to unpack .../01-sound-theme-freedesktop_0.8-2_all.deb ...
Unpacking sound-theme-freedesktop (0.8-2) ...
Selecting previously unselected package libcanberra0:arm64.
Preparing to unpack .../02-libcanberra0_0.30-8_arm64.deb ...
Unpacking libcanberra0:arm64 (0.30-8) ...
Selecting previously unselected package libserd-0-0:arm64.
Preparing to unpack .../03-libserd-0-0_0.30.10-2_arm64.deb ...
Unpacking libserd-0-0:arm64 (0.30.10-2) ...
Selecting previously unselected package libsord-0-0:arm64.
Preparing to unpack .../04-libsord-0-0_0.16.8-2_arm64.deb ...
Unpacking libsord-0-0:arm64 (0.16.8-2) ...
Selecting previously unselected package libsratom-0-0:arm64.
Preparing to unpack .../05-libsratom-0-0_0.6.8-1_arm64.deb ...
Unpacking libsratom-0-0:arm64 (0.6.8-1) ...
Selecting previously unselected package liblilv-0-0:arm64.
Preparing to unpack .../06-liblilv-0-0_0.24.12-2_arm64.deb ...
Unpacking liblilv-0-0:arm64 (0.24.12-2) ...
Selecting previously unselected package liblua5.3-0:arm64.
Preparing to unpack .../07-liblua5.3-0_5.3.6-1_arm64.deb ...
Unpacking liblua5.3-0:arm64 (5.3.6-1) ...
Selecting previously unselected package libwebrtc-audio-processing1:arm64.
Preparing to unpack .../08-libwebrtc-audio-processing1_0.3-1+b1_arm64.deb ...
Unpacking libwebrtc-audio-processing1:arm64 (0.3-1+b1) ...
Selecting previously unselected package libpipewire-0.3-modules:arm64.
Preparing to unpack .../09-libpipewire-0.3-modules_0.3.45-1_arm64.deb ...
Unpacking libpipewire-0.3-modules:arm64 (0.3.45-1) ...
Selecting previously unselected package libwireplumber-0.4-0:arm64.
Preparing to unpack .../10-libwireplumber-0.4-0_0.4.8-2_arm64.deb ...
Unpacking libwireplumber-0.4-0:arm64 (0.4.8-2) ...
Selecting previously unselected package pipewire-bin.
Preparing to unpack .../11-pipewire-bin_0.3.45-1_arm64.deb ...
Unpacking pipewire-bin (0.3.45-1) ...
Selecting previously unselected package pipewire:arm64.
Preparing to unpack .../12-pipewire_0.3.45-1_arm64.deb ...
Unpacking pipewire:arm64 (0.3.45-1) ...
Selecting previously unselected package pipewire-pulse.
Preparing to unpack .../13-pipewire-pulse_0.3.45-1_arm64.deb ...
Unpacking pipewire-pulse (0.3.45-1) ...
Preparing to unpack .../14-rtkit_0.13-4_arm64.deb ...
Unpacking rtkit (0.13-4) ...
Selecting previously unselected package wireplumber.
Preparing to unpack .../15-wireplumber_0.4.8-2_arm64.deb ...
Unpacking wireplumber (0.4.8-2) ...
Setting up rtkit (0.13-4) ...
Setting up libwebrtc-audio-processing1:arm64 (0.3-1+b1) ...
Setting up libltdl7:arm64 (2.4.6-15) ...
Setting up sound-theme-freedesktop (0.8-2) ...
Setting up liblua5.3-0:arm64 (5.3.6-1) ...
Setting up libserd-0-0:arm64 (0.30.10-2) ...
Setting up libcanberra0:arm64 (0.30-8) ...
Setting up libwireplumber-0.4-0:arm64 (0.4.8-2) ...
Setting up libsord-0-0:arm64 (0.16.8-2) ...
Setting up libsratom-0-0:arm64 (0.6.8-1) ...
Setting up liblilv-0-0:arm64 (0.24.12-2) ...
Setting up libpipewire-0.3-modules:arm64 (0.3.45-1) ...
Setting up pipewire-bin (0.3.45-1) ...
Setting up pipewire:arm64 (0.3.45-1) ...
Created symlink /etc/systemd/user/default.target.wants/pipewire.service →
/usr/lib/systemd/user/pipewire.service.
Created symlink /etc/systemd/user/sockets.target.wants/pipewire.socket →
/usr/lib/systemd/user/pipewire.socket.
Setting up wireplumber (0.4.8-2) ...
Failed to preset unit, file /etc/systemd/user/pipewire-session-manager.service
already exists and is a symlink to
/usr/lib/systemd/user/pipewire-media-session.service.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on
wireplumber.service: No such file or directory
Setting up pipewire-pulse (0.3.45-1) ...
Created symlink /etc/systemd/user/default.target.wants/pipewire-pulse.service →
/usr/lib/systemd/user/pipewire-pulse.service.
Created symlink /etc/systemd/user/sockets.target.wants/pipewire-pulse.socket →
/usr/lib/systemd/user/pipewire-pulse.socket.
Processing triggers for man-db (2.10.0-2) ...
Processing triggers for dbus (1.12.20-3) ...
Processing triggers for libc-bin (2.33-5) ...
[master 5b1e068] committing changes in /etc made by "aptitude install
wireplumber pipewire -t sid"
6 files changed, 5 insertions(+), 1 deletion(-)
delete mode 120000 systemd/system/rtkit-daemon.service
create mode 120000 systemd/user/default.target.wants/pipewire-pulse.service
create mode 120000 systemd/user/default.target.wants/pipewire.service
create mode 120000 systemd/user/sockets.target.wants/pipewire-pulse.socket
create mode 120000 systemd/user/sockets.target.wants/pipewire.socket
root@cs03:~# aptitude purge wireplumber pipewire
The following packages will be REMOVED:
libcanberra0{u} liblilv-0-0{u} libltdl7{u} liblua5.3-0{u}
libpipewire-0.3-modules{u} libserd-0-0{u} libsord-0-0{u} libsratom-0-0{u}
libwebrtc-audio-processing1{u}
libwireplumber-0.4-0{u} pipewire{p} pipewire-bin{u} pipewire-pulse{u}
rtkit{u} sound-theme-freedesktop{u} wireplumber{p}
0 packages upgraded, 0 newly installed, 16 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 8,306 kB will be freed.
Do you want to continue? [Y/n/?]
(Reading database ... 37446 files and directories currently installed.)
Removing wireplumber (0.4.8-2) ...
Removing pipewire-pulse (0.3.45-1) ...
Removing pipewire:arm64 (0.3.45-1) ...
Removing pipewire-bin (0.3.45-1) ...
Removing libpipewire-0.3-modules:arm64 (0.3.45-1) ...
Removing libcanberra0:arm64 (0.30-8) ...
Removing liblilv-0-0:arm64 (0.24.12-2) ...
Removing libltdl7:arm64 (2.4.6-15) ...
Removing libwireplumber-0.4-0:arm64 (0.4.8-2) ...
Removing liblua5.3-0:arm64 (5.3.6-1) ...
Removing libsratom-0-0:arm64 (0.6.8-1) ...
Removing libsord-0-0:arm64 (0.16.8-2) ...
Removing libserd-0-0:arm64 (0.30.10-2) ...
Removing libwebrtc-audio-processing1:arm64 (0.3-1+b1) ...
Removing rtkit (0.13-4) ...
Removing sound-theme-freedesktop (0.8-2) ...
Processing triggers for man-db (2.10.0-2) ...
Processing triggers for dbus (1.12.20-3) ...
Processing triggers for libc-bin (2.33-5) ...
(Reading database ... 37086 files and directories currently installed.)
Purging configuration files for wireplumber (0.4.8-2) ...
Purging configuration files for pipewire:arm64 (0.3.45-1) ...
[master 92f02b8] committing changes in /etc made by "aptitude purge wireplumber
pipewire"
5 files changed, 3 insertions(+), 2 deletions(-)
create mode 120000 systemd/system/rtkit-daemon.service
delete mode 120000 systemd/user/default.target.wants/pipewire.service
create mode 120000 systemd/user/pipewire-pulse.service
create mode 120000 systemd/user/pipewire-pulse.socket
delete mode 120000 systemd/user/sockets.target.wants/pipewire.socket
root@cs03:~# ls -lh /usr/lib/systemd/user/
total 140K
-rw-r--r-- 1 root root 419 Jan 18 12:35 app.slice
-rw-r--r-- 1 root root 424 Jan 18 12:35 background.slice
-rw-r--r-- 1 root root 505 Jan 18 12:35 basic.target
-rw-r--r-- 1 root root 427 Jan 18 12:35 bluetooth.target
-rw-r--r-- 1 root root 360 Oct 25 11:32 dbus.service
-rw-r--r-- 1 root root 174 Oct 25 11:32 dbus.socket
-rw-r--r-- 1 root root 471 Jan 18 12:35 default.target
-rw-r--r-- 1 root root 212 Aug 28 2017 dirmngr.service
-rw-r--r-- 1 root root 204 Aug 28 2017 dirmngr.socket
-rw-r--r-- 1 root root 510 Jan 18 12:35 exit.target
-rw-r--r-- 1 root root 298 Aug 28 2017 gpg-agent-browser.socket
-rw-r--r-- 1 root root 281 Aug 28 2017 gpg-agent-extra.socket
-rw-r--r-- 1 root root 223 Aug 28 2017 gpg-agent.service
-rw-r--r-- 1 root root 234 Aug 28 2017 gpg-agent.socket
-rw-r--r-- 1 root root 308 Aug 28 2017 gpg-agent-ssh.socket
-rw-r--r-- 1 root root 554 Jan 27 00:35 graphical-session-pre.target
drwxr-xr-x 2 root root 4.0K Jan 29 21:18 graphical-session-pre.target.wants
-rw-r--r-- 1 root root 492 Jan 18 12:35 graphical-session.target
-rw-r--r-- 1 root root 1.1K Dec 17 21:46 mpd.service
-rw-r--r-- 1 root root 135 Dec 1 20:00 mpd.socket
-rw-r--r-- 1 root root 402 Jan 18 12:35 paths.target
-rw-r--r-- 1 root root 425 Jan 18 12:35 printer.target
-rw-r--r-- 1 root root 420 Jan 18 12:35 session.slice
-rw-r--r-- 1 root root 450 Jan 18 12:35 shutdown.target
-rw-r--r-- 1 root root 428 Jan 18 12:35 smartcard.target
-rw-r--r-- 1 root root 404 Jan 18 12:35 sockets.target
drwxr-xr-x 2 root root 4.0K Feb 1 19:29 sockets.target.wants
-rw-r--r-- 1 root root 428 Jan 18 12:35 sound.target
-rw-r--r-- 1 root root 287 Dec 29 13:08 ssh-agent.service
-rw-r--r-- 1 root root 598 Jan 18 12:35 systemd-exit.service
-rw-r--r-- 1 root root 688 Jan 18 12:35 systemd-tmpfiles-clean.service
-rw-r--r-- 1 root root 541 Jan 18 12:35 systemd-tmpfiles-clean.timer
-rw-r--r-- 1 root root 728 Jan 18 12:35 systemd-tmpfiles-setup.service
-rw-r--r-- 1 root root 453 Jan 18 12:35 timers.target
-rw-r--r-- 1 root root 477 Jan 18 12:35 xdg-desktop-autostart.target
root@cs03:~# ls -lh /etc/systemd/user/
total 12K
drwxr-xr-x 2 root root 4.0K Feb 10 21:43 default.target.wants
lrwxrwxrwx 1 root root 9 Feb 10 02:12 pipewire-media-session.service ->
/dev/null
lrwxrwxrwx 1 root root 9 Feb 10 21:43 pipewire-pulse.service -> /dev/null
lrwxrwxrwx 1 root root 9 Feb 10 21:43 pipewire-pulse.socket -> /dev/null
drwxr-xr-x 2 root root 4.0K Feb 10 02:12 pipewire.service.wants
lrwxrwxrwx 1 root root 52 Jan 27 00:38 pipewire-session-manager.service ->
/usr/lib/systemd/user/pipewire-media-session.service
drwxr-xr-x 2 root root 4.0K Feb 10 21:43 sockets.target.wants
root@cs03:~# aptitude search ~ipulse
i A libpulse0 - PulseAudio client libraries
root@cs03:~# ls -lh /usr/lib/systemd/user/pipewire-media-session.service
ls: cannot access '/usr/lib/systemd/user/pipewire-media-session.service': No
such file or directory
root@cs03:~# ls -lh /etc/systemd/user/pipewire.service.wants/
total 0
lrwxrwxrwx 1 root root 52 Jan 27 00:38 pipewire-media-session.service ->
/usr/lib/systemd/user/pipewire-media-session.service
lrwxrwxrwx 1 root root 41 Feb 10 02:12 wireplumber.service ->
/usr/lib/systemd/user/wireplumber.service
root@cs03:~# aptitude search wireplumber
p libwireplumber-0.4-0 - Shared libraries for
WirePlumber
p libwireplumber-0.4-dev - Development files for
WirePlumber
p wireplumber - modular session / policy
manager for PipeWire
root@cs03:~#
signature.asc
Description: This is a digitally signed message part.
