Package: linux-image-2.6.16 Version: linux-image-2.6.16-1-686 Severity: normal
When I plug my USB Camera into my Thinkpad R40 while I run the Kernel from 2.6.16-9 or 2.6.16-10, I get the following in /var/log/messages: Apr 27 14:37:00 localhost kernel: usb 4-3: new high speed USB device using ehci_hcd and address 3 Apr 27 14:37:00 localhost kernel: usb 4-3: configuration #1 chosen from 1 choice Apr 27 14:37:00 localhost kernel: scsi_mod: disagrees about version of symbol struct_module Apr 27 14:37:00 localhost kernel: usb_storage: disagrees about version of symbol struct_module And the Camera is not usable (no device created by udev). Under 2.6.16-7, the output looks like: Apr 27 14:44:45 localhost kernel: usb 4-3: new high speed USB device using ehci_hcd and address 4 Apr 27 14:44:45 localhost kernel: usb 4-3: configuration #1 chosen from 1 choice Apr 27 14:44:46 localhost kernel: SCSI subsystem initialized Apr 27 14:44:46 localhost kernel: Initializing USB Mass Storage driver... Apr 27 14:44:46 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices Apr 27 14:44:46 localhost kernel: usbcore: registered new driver usb-storage Apr 27 14:44:46 localhost kernel: USB Mass Storage support registered. Apr 27 14:44:51 localhost kernel: Vendor: Sony Model: Sony DSC Rev: 6.00 Apr 27 14:44:51 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Apr 27 14:44:51 localhost kernel: SCSI device sda: 960512 512-byte hdwr sectors (492 MB) Apr 27 14:44:51 localhost kernel: sda: Write Protect is off Apr 27 14:44:51 localhost kernel: SCSI device sda: 960512 512-byte hdwr sectors (492 MB) Apr 27 14:44:51 localhost kernel: sda: Write Protect is off Apr 27 14:44:51 localhost kernel: sda: sda1 Apr 27 14:44:51 localhost kernel: sd 0:0:0:0: Attached scsi removable disk sda And the Camera is accessible. Hopefully this report is useful; keep up the good work! Greets - TiB. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (990, 'unstable'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
