Hi Lionel, Lionel Elie Mamane schrieb am 21. December 2005:
> Hanno? Did you get my previous email? Have you tried the latest > firmware? I you still get this segfault with the latest firmware, I'd > really like to report this bug upstream. Sorry, it took quite some time to have time (and the need ;) to check capi4hylafax again. Unfortunately, also with the latest firmware I have that problem. > > Not for me, sorry. I already get the core when I try to send a fax > > to myself (to test wether c2faxrecv is broken). > > Standard question before I forward the bug upstream: > > Are you using the latest firmware? (From > ftp://ftp.in-berlin.de/pub/capi4linux/firmware .) > > Your logs suggest you use firmware 3.10-02. Please try 3.11-03. I tried it now: (fresh reboot to be sure ;) ----------------------------------- [EMAIL PROTECTED](27):~$ uptime 06:42:30 up 10 min, 4 users, load average: 0.00, 0.06, 0.06 [EMAIL PROTECTED](28):~$ uname -a Linux luggage 2.6.8-11-amd64-k8 #1 Wed Jun 1 01:03:08 CEST 2005 x86_64 GNU/Linux [EMAIL PROTECTED](29):~$ dmesg|grep capi kcapi: Controller 1: b1pciv4-9800 attached capifs: Rev 1.1.2.3 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) kcapi: card 1 "b1pciv4-9800" ready. [EMAIL PROTECTED](31):~$ dmesg|grep b1pci b1pci: PCI BIOS reports AVM-B1 V4 at i/o 0x9800, irq 5, mem 0xf4004000 kcapi: Controller 1: b1pciv4-9800 attached b1pci: AVM B1 PCI V4 at i/o 0x9800, irq 5, mem 0xf4004000, revision 4 (dma) b1pci: revision 1.1.2.2 b1pciv4-9800: card 1 "B1" ready. b1pciv4-9800: card 1 Protocol: DSS1 b1pciv4-9800: card 1 Linetype: point to multipoint b1pciv4-9800: B1-card (3.11-03) now active kcapi: card 1 "b1pciv4-9800" ready. [EMAIL PROTECTED](32):~$ dmesg|grep c2 c2faxrecv[3474]: segfault at 000000010053443f rip 0000000000420e0e rsp 0000007fbffff8a0 error 4 (this is at the start of capi4hylafax) when I try to send a fax, I also get a segfault: [EMAIL PROTECTED](33):~$ c2faxsend -d 497112536214 test.pinguin The config file is /var/spool/hylafax/etc/config.faxCAPI. Segmentation fault c2faxsend[5141]: segfault at 000000010054377f rip 000000000041fd4e rsp 0000007fbfff7da0 error 4 Interesting enough is the strace for that command: [EMAIL PROTECTED](42):~$ strace c2faxsend -d 497112536214 test.pinguin [..] set_tid_address(0x2a962c9850) = 5506 rt_sigaction(SIGRTMIN, {0x2a956714f0, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN], NULL, 8) = 0 getrlimit(0x3, 0x7fbffff960) = 0 brk(0) = 0x533000 brk(0x555000) = 0x555000 brk(0) = 0x555000 rt_sigaction(SIGALRM, {0x41c100, [ALRM], SA_RESTART|0x4000000}, {SIG_DFL}, 8) = 0 setitimer(ITIMER_REAL, {it_interval={1, 0}, it_value={1, 0}}, NULL) = 0 prctl(0x3, 0x421574, 0x1, 0, 0x71) = 1 fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 2), ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9556b000 write(1, "The config file is /var/spool/hy"..., 58The config file is /var/spool/hylafax/etc/config.faxCAPI. ) = 58 open("/var/spool/hylafax/etc/config.faxCAPI", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=15615, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2a9556c000 read(3, "#\n# EDIT THIS CONFIGURATION TO R"..., 4096) = 4096 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ ----------------------------------------- Does this help a little bit? Ciao, Hanno -- | Hanno Wagner | Member of the HTML Writers Guild | [EMAIL PROTECTED] | | Eine gewerbliche Nutzung meiner Email-Adressen ist nicht gestattet! | | 74 a3 53 cc 0b 19 - we did it! | Generation @ | #"I am dreaming of a wild christmas, like the ones I used to know." # -- Sang Frinatra
signature.asc
Description: Digital signature
