Package: src:linux Version: 5.10.40-1 Severity: normal X-Debbugs-Cc: ddbg72982...@gmail.com
Dear Maintainer, Suspend does not complete on Latitude E6500. >From Fn+F1, mate menu, power-button, or lid: Display goes fully dark, but fan stays on and power LED does not pulse. Must hold power button in to shut off & then reboot. Shutdown from menu does not complete either: bare graphical Debian display remains, fan stays on. Tested with Live system: http://cdimage.debian.org/images/weekly-live-builds/amd64/iso-hybrid/debian-live-testing-amd64-mate.iso Last-Modified: Mon, 28 Jun 2021 04:06:51 GMT Content-Length: 2583691264 Have tried numerous other live/testing systems and all fail Debian 8 suspend/resume and poweroff have been long-term reliable on this hardware by means of Fn+F1, or Mate System menu. -- Package-specific info: ** Version: Linux version 5.10.0-7-amd64 (debian-ker...@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.40-1 (2021-05-28) ** Command line: BOOT_IMAGE=/live/vmlinuz-5.10.0-7-amd64 initrd=/live/initrd.img-5.10.0-7-amd64 boot=live components splash quiet ** Not tainted ** Kernel log: ** Model information [ 9.199784] systemd[1]: Finished Load Kernel Module configfs. [ 9.200332] systemd[1]: modprobe@fuse.service: Succeeded. [ 9.206299] systemd[1]: Finished Load Kernel Module fuse. [ 9.208658] systemd[1]: Finished Load Kernel Modules. [ 9.218259] systemd[1]: Mounting FUSE Control File System... [ 9.219677] systemd[1]: Mounting Kernel Configuration File System... [ 9.222598] systemd[1]: Starting Apply Kernel Variables... [ 9.225472] systemd[1]: Mounted FUSE Control File System. [ 9.231416] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 9.257972] systemd[1]: Finished Load/Save Random Seed. [ 9.258863] systemd[1]: Mounted Kernel Configuration File System. [ 9.259531] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 9.335351] systemd[1]: Finished Apply Kernel Variables. [ 9.337835] systemd[1]: Finished Create System Users. [ 9.339210] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.402199] systemd[1]: Finished Create Static Device Nodes in /dev. [ 9.402446] systemd[1]: Reached target Local File Systems (Pre). [ 9.403592] systemd[1]: Mounting /tmp... [ 9.406697] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 9.419812] systemd[1]: Mounted /tmp. [ 9.420012] systemd[1]: Reached target Local File Systems. [ 9.420082] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 9.422224] systemd[1]: Starting Set console font and keymap... [ 9.423473] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 9.423559] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.423645] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.487490] systemd[1]: Received SIGRTMIN+20 from PID 184 (plymouthd). [ 9.490667] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 9.499849] systemd[1]: Started Journal Service. [ 9.529780] systemd-journald[381]: Received client request to flush runtime journal. [ 10.198609] ACPI: AC Adapter [AC] (on-line) [ 10.743020] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:024f] [ 10.822117] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.822165] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 10.822210] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 10.822253] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 10.865312] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 10.877450] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19 [ 10.877455] yenta_cardbus 0000:03:01.0: Socket status: 30000006 [ 10.877461] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff] [ 10.877464] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xf1b00000-0xf1bfffff] [ 10.877466] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf1b00000-0xf1bfffff: [ 10.877475] excluding 0xf1bf0000-0xf1bfffff [ 10.928070] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 10.928404] iTCO_vendor_support: vendor-support=0 [ 10.937730] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 11.003289] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9 [ 11.005127] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 11.005178] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) [ 11.005292] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.164118] intel_powerclamp: No package C-state available [ 11.193054] intel_powerclamp: No package C-state available [ 11.494613] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD71B7X: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line [ 11.494619] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 11.494621] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 11.494623] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 11.494624] snd_hda_codec_idt hdaudioC0D0: inputs: [ 11.494626] snd_hda_codec_idt hdaudioC0D0: Dock Mic=0xe [ 11.494628] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x18 [ 11.494630] snd_hda_codec_idt hdaudioC0D0: Mic=0xb [ 11.550058] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 11.550937] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 11.551409] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 11.557826] input: HDA Intel Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 11.557996] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 11.654338] dell_laptop: Using i8042 filter function for receiving events [ 11.818405] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.818773] cfg80211: Loaded X.509 cert 'b...@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 11.819116] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 11.819458] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.835736] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 11.835882] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 12.057058] leds dell::kbd_backlight: Setting an LED's brightness failed (-5) [ 12.442722] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 12.488687] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1 [ 12.488704] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2062, Revision 2, Version 0 [ 12.505889] Broadcom 43xx driver loaded [ Features: PNLS ] [ 12.507880] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2) [ 12.507884] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 12.507886] b43 ssb0:0: Direct firmware load for b43/ucode15.fw failed with error -2 [ 12.510321] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2) [ 12.510326] b43 ssb0:0: Direct firmware load for b43/ucode15.fw failed with error -2 [ 12.511188] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2) [ 12.511192] b43 ssb0:0: Direct firmware load for b43-open/ucode15.fw failed with error -2 [ 12.511213] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2) [ 12.511216] b43 ssb0:0: Direct firmware load for b43-open/ucode15.fw failed with error -2 [ 12.511220] b43-phy0 ERROR: You must go to https://wireless.wiki.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 26.445351] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 26.445460] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 26.445501] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 77.136969] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 77.138916] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 77.209161] ISO 9660 Extensions: RRIP_1991A [ 77.229523] leds dell::kbd_backlight: Setting an LED's brightness failed (-5) [ 77.323162] REISERFS (device sdc3): found reiserfs format "3.6" with non-standard journal [ 77.323178] REISERFS (device sdc3): using ordered data mode [ 77.323179] reiserfs: using flush barriers [ 77.327920] REISERFS (device sdc3): journal params: device sdc3, size 512, journal first block 18, max trans len 256, max batch 225, max commit age 30, max trans age 30 [ 77.327994] REISERFS (device sdc3): checking transaction log (sdc3) [ 77.372186] REISERFS (device sdc3): Using r5 hash to sort names sys_vendor: Dell Inc. product_name: Latitude E6500 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: A10 board_vendor: Dell Inc. board_name: 0PP476 board_version: ** Loaded modules: reiserfs nls_utf8 b43 cordic bcma mac80211 cfg80211 dell_rbtn snd_hda_codec_idt snd_hda_codec_generic dell_laptop ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation rfkill libarc4 dell_smm_hwmon snd_soc_core rng_core coretemp iTCO_wdt dell_wmi joydev snd_compress soundwire_cadence dell_smbios intel_pmc_bxt serio_raw iTCO_vendor_support dcdbas wmi_bmof pcspkr snd_hda_codec sparse_keymap dell_wmi_descriptor sg watchdog yenta_socket pcmcia_rsrc snd_hda_core snd_hwdep soundwire_bus evdev snd_pcm snd_timer snd soundcore ac acpi_cpufreq configfs fuse ip_tables x_tables autofs4 squashfs loop overlay isofs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sd_mod t10_pi crc_t10dif crct10dif_generic sr_mod crct10dif_common cdrom uas ata_generic usb_storage psmouse nouveau ata_piix i2c_i801 i2c_smbus libata scsi_mod firewire_ohci sdhci_pci cqhci sdhci firewire_core crc_itu_t lpc_ich mxm_wmi ssb mmc_core e1000e i2c_algo_bit ehci_pci ttm drm_kms_helper uhci_hcd ehci_hcd cec pcmcia pcmcia_core usbcore drm usb_common ptp pps_core wmi battery button video ** Network interface configuration: *** /etc/network/interfaces: auto lo iface lo inet loopback *** /etc/network/interfaces.d/setup: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:21:70:ce:95:7f brd ff:ff:ff:ff:ff:ff inet 192.168.14.149/24 brd 192.168.14.255 scope global dynamic noprefixroute enp0s25 valid_lft 85184sec preferred_lft 85184sec inet6 fe80::90e8:e3cf:ed75:63b6/64 scope link noprefixroute valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 8490 98 0 0 0 0 0 0 8490 98 0 0 0 0 0 0 enp0s25: 25254883 16820 0 0 0 0 0 0 604008 7689 0 0 0 0 0 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) Subsystem: Dell Mobile 4 Series Chipset Memory Controller Hub [1028:024f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff [size=4K] Memory behind bridge: f2000000-f6efffff [size=79M] Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff [size=256M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03) Subsystem: Dell 82567LM Gigabit Network Connection [1028:024f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at f6fe0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f6fdb000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at efe0 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell 82801I (ICH9 Family) USB UHCI Controller [1028:024f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f60 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell 82801I (ICH9 Family) USB UHCI Controller [1028:024f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f80 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell 82801I (ICH9 Family) USB UHCI Controller [1028:024f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 6fa0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell 82801I (ICH9 Family) USB2 EHCI Controller [1028:024f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Subsystem: Dell 82801I (ICH9 Family) HD Audio Controller [1028:024f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Region 0: Memory at f6fdc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff [size=4K] Memory behind bridge: 80000000-801fffff [size=2M] Prefetchable memory behind bridge: 0000000080200000-00000000803fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 26 Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 I/O behind bridge: 00003000-00003fff [size=4K] Memory behind bridge: f1f00000-f1ffffff [size=1M] Prefetchable memory behind bridge: 0000000080400000-00000000805fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 27 Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 I/O behind bridge: 00004000-00004fff [size=4K] Memory behind bridge: 80600000-807fffff [size=2M] Prefetchable memory behind bridge: 0000000080800000-00000000809fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 28 Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0 I/O behind bridge: 0000c000-0000cfff [size=4K] Memory behind bridge: f1c00000-f1efffff [size=3M] Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell 82801I (ICH9 Family) USB UHCI Controller [1028:024f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell 82801I (ICH9 Family) USB UHCI Controller [1028:024f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f20 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell 82801I (ICH9 Family) USB UHCI Controller [1028:024f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 6f40 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell 82801I (ICH9 Family) USB2 EHCI Controller [1028:024f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=04, sec-latency=32 I/O behind bridge: 00005000-00005fff [size=4K] Memory behind bridge: f1b00000-f1bfffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03) Subsystem: Dell ICH9M-E LPC Interface Controller [1028:024f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] [8086:2928] (rev 03) (prog-if 8f [PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering]) Subsystem: Dell 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] [1028:024f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: I/O ports at 6e70 [size=8] Region 1: I/O ports at 6e78 [size=4] Region 2: I/O ports at 6e80 [size=8] Region 3: I/O ports at 6e88 [size=4] Region 4: I/O ports at 6ea0 [size=16] Region 5: I/O ports at 6e90 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) Subsystem: Dell 82801I (ICH9 Family) SMBus Controller [1028:024f] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 0: Memory at f6fdaf00 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1100 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00:1f.5 IDE interface [0101]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] [8086:292d] (rev 03) (prog-if 85 [PCI native mode-only controller, supports bus mastering]) Subsystem: Dell 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] [1028:024f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: I/O ports at 6eb0 [size=8] Region 1: I/O ports at 6eb8 [size=4] Region 2: I/O ports at 6ec0 [size=8] Region 3: I/O ports at 6ec8 [size=4] Region 4: I/O ports at 6ee0 [size=16] Region 5: I/O ports at efa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98M [Quadro NVS 160M] [10de:06eb] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell G98M [Quadro NVS 160M] [1028:024f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at df00 [size=128] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau Kernel modules: nouveau 03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba) Subsystem: Dell RL5c476 II [1028:024f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 19 Region 0: Memory at 84000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=04, sec-latency=176 Memory window 0: 88000000-8bffffff (prefetchable) Memory window 1: 8c000000-8fffffff I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Capabilities: <access denied> Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI]) Subsystem: Dell R5C832 IEEE 1394 Controller [1028:024f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f1bff800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire_ohci 03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01) Subsystem: Dell R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1028:024f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at f1bff600 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci_pci 0c:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f1ffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge Kernel modules: ssb ** USB devices: Bus 008 Device 003: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive Bus 008 Device 002: ID 14cd:125c Super Top SD card reader Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 11.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-7-amd64 (SMP w/2 CPU threads) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.10.0-7-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.140 ii kmod 28-1 ii linux-base 4.6 Versions of packages linux-image-5.10.0-7-amd64 recommends: ii apparmor 2.13.6-10 ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.10.0-7-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | grub-efi-amd64 | extlinux <none> pn linux-doc-5.10 <none> Versions of packages linux-image-5.10.0-7-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
