Package: src:linux Version: 5.8.10-1 Severity: normal Dear Maintainer,
I am reporting a similar symptom to https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968109 for a different kernel package (armmp-lpae). PCI peripherals of Raspberry Pi 4B (8GB model) are completely invisible. lspci shows nothing. As a result, USB is unusable. Best regards, Ryutaroh Matsumoto -- Package-specific info: ** Version: Linux version 5.8.0-2-armmp-lpae (debian-ker...@lists.debian.org) (gcc-10 (Debian 10.2.0-8) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.8.10-1 (2020-09-19) ** Command line: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 rootwait ** Tainted: CE (9216) * staging driver was loaded * unsigned module was loaded ** Kernel log: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.8.0-2-armmp-lpae (debian-ker...@lists.debian.org) (gcc-10 (Debian 10.2.0-8) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.8.10-1 (2020-09-19) [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0 totalpages: 2061312 [ 0.000000] DMA zone: 2304 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 1864704 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 21 pages/cpu s54220 r8192 d23604 u86016 [ 0.000000] pcpu-alloc: s54220 r8192 d23604 u86016 alloc=21*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2059008 [ 0.000000] Kernel command line: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 rootwait [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x23985000-0x27985000] (64MB) [ 0.000000] Memory: 7974884K/8245248K available (10240K kernel code, 1263K rwdata, 3228K rodata, 2048K init, 336K bss, 204828K reserved, 65536K cma-reserved, 7393280K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x48/0x570 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 35987 entries in 71 pages [ 0.000000] ftrace: allocated 71 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000027] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000087] bcm2835: system timer (irq = 17) [ 0.002136] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.002154] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.002172] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.002187] Switching to timer-based delay loop, resolution 18ns [ 0.002577] Console: colour dummy device 80x30 [ 0.003135] printk: console [tty0] enabled [ 0.003190] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.003220] pid_max: default: 32768 minimum: 301 [ 0.003434] LSM: Security Framework initializing [ 0.003505] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.003661] AppArmor: AppArmor initialized [ 0.003684] TOMOYO Linux initialized [ 0.003767] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003798] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004854] CPU: Testing write buffer coherency: ok [ 0.005184] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005790] Setting up static identity map for 0x400000 - 0x4000ac [ 0.006649] rcu: Hierarchical SRCU implementation. [ 0.009388] EFI services will not be available. [ 0.009801] smp: Bringing up secondary CPUs ... [ 0.010703] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011666] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.012542] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.012669] smp: Brought up 1 node, 4 CPUs [ 0.012722] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.012741] CPU: All CPU(s) started in HYP mode. [ 0.012756] CPU: Virtualization extensions available. [ 0.013558] devtmpfs: initialized [ 0.021349] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.021854] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.021934] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.023859] pinctrl core: initialized pinctrl subsystem [ 0.024729] thermal_sys: Registered thermal governor 'fair_share' [ 0.024734] thermal_sys: Registered thermal governor 'step_wise' [ 0.025001] DMI not present or invalid. [ 0.025414] NET: Registered protocol family 16 [ 0.028067] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.028798] audit: initializing netlink subsys (disabled) [ 0.029027] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1 [ 0.030380] No ATAGs? [ 0.030529] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030553] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.031551] Serial: AMBA PL011 UART driver [ 0.054327] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.134817] iommu: Default domain type: Translated [ 1.135520] vgaarb: loaded [ 1.136284] mc: Linux media interface: v0.10 [ 1.136333] videodev: Linux video capture interface: v2.00 [ 1.137583] NetLabel: Initializing [ 1.137602] NetLabel: domain hash size = 128 [ 1.137618] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.137701] NetLabel: unlabeled traffic allowed by default [ 1.138217] clocksource: Switched to clocksource arch_sys_counter [ 1.230187] VFS: Disk quotas dquot_6.6.0 [ 1.230323] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.231227] AppArmor: AppArmor Filesystem Enabled [ 1.231959] simple-framebuffer 3e29a000.framebuffer: framebuffer at 0x3e29a000, 0x960000 bytes, mapped to 0x(ptrval) [ 1.231991] simple-framebuffer 3e29a000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680 [ 1.255171] Console: switching to colour frame buffer device 240x80 [ 1.277790] simple-framebuffer 3e29a000.framebuffer: fb0: simplefb registered! [ 1.287737] NET: Registered protocol family 2 [ 1.288484] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.288655] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.288868] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.289035] TCP: Hash tables configured (established 8192 bind 8192) [ 1.289276] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.289410] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.289695] NET: Registered protocol family 1 [ 1.289792] NET: Registered protocol family 44 [ 1.289877] PCI: CLS 0 bytes, default 64 [ 1.290362] Trying to unpack rootfs image as initramfs... [ 3.006881] Freeing initrd memory: 22996K [ 3.009022] Initialise system trusted keyrings [ 3.009165] Key type blacklist registered [ 3.009424] workingset: timestamp_bits=14 max_order=21 bucket_order=7 [ 3.017301] zbud: loaded [ 3.018389] integrity: Platform Keyring initialized [ 3.018487] Key type asymmetric registered [ 3.018561] Asymmetric key parser 'x509' registered [ 3.018873] bounce: pool size: 64 pages [ 3.018985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.019365] io scheduler mq-deadline registered [ 3.034813] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.037244] printk: console [ttyS1] disabled [ 3.037402] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 33, base_baud = 33402922) is a 16550 [ 3.857414] printk: console [ttyS1] enabled [ 3.862711] Serial: AMBA driver [ 3.867145] STM32 USART driver initialized [ 3.872881] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.882224] libphy: Fixed MDIO Bus: probed [ 3.886962] mousedev: PS/2 mouse device common for all mice [ 3.897321] ledtrig-cpu: registered to indicate activity on CPUs [ 3.904139] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 3.911145] NET: Registered protocol family 10 [ 3.955781] Segment Routing with IPv6 [ 3.959787] mip6: Mobile IPv6 [ 3.962869] NET: Registered protocol family 17 [ 3.967624] mpls_gso: MPLS GSO support [ 3.971832] Registering SWP/SWPB emulation handler [ 3.976963] registered taskstats version 1 [ 3.981209] Loading compiled-in X.509 certificates [ 4.234156] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.243231] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 4.250491] zswap: loaded using pool lzo/zbud [ 4.255618] Key type ._fscrypt registered [ 4.259790] Key type .fscrypt registered [ 4.263866] Key type fscrypt-provisioning registered [ 4.269180] AppArmor: AppArmor sha1 policy hashing enabled [ 4.281476] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 31, base_baud = 0) is a PL011 rev2 [ 4.296512] serial serial0: tty port ttyAMA0 registered [ 4.310489] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-01T13:23:40 [ 4.325649] raspberrypi-clk raspberrypi-clk: CPU frequency range: min 600000000, max 1500000000 [ 4.359099] Freeing unused kernel memory: 2048K [ 4.370154] Checked W+X mappings: passed, no W+X pages found [ 4.381747] Run /init as init process [ 4.391228] with arguments: [ 4.391236] /init [ 4.391243] with environment: [ 4.391250] HOME=/ [ 4.391256] TERM=linux [ 4.760682] sdhci: module verification failed: signature and/or required key missing - tainting kernel [ 4.770510] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 4.800331] sdhci: Secure Digital Host Controller Interface driver [ 4.813371] sdhci: Copyright(c) Pierre Ossman [ 4.832177] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.857143] usbcore: registered new interface driver usbfs [ 4.871314] usbcore: registered new interface driver hub [ 4.871338] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq [ 4.883562] usbcore: registered new device driver usb [ 4.922433] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using PIO [ 4.948231] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 4.956953] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.961518] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 4.974682] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.983295] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 5.013078] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.028062] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 5.041355] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.082364] random: fast init done [ 5.087652] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 5.091733] mmc1: new ultra high speed DDR50 SDHC card at address 5048 [ 5.118639] mmcblk1: mmc1:5048 SD32G 28.9 GiB [ 5.131922] mmcblk1: p1 p2 p3 [ 5.172801] mmc0: new high speed SDIO card at address 0001 [ 5.386768] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.589062] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 5.942409] systemd[1]: System time before build time, advancing clock. [ 6.000755] systemd[1]: Inserted module 'autofs4' [ 6.050447] systemd[1]: systemd 246.6-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 6.085961] systemd[1]: Detected architecture arm. [ 6.139479] systemd[1]: Set hostname to <rpi4armhf-20200927>. [ 6.796863] systemd[1]: Queued start job for default target Graphical Interface. [ 6.811918] random: systemd: uninitialized urandom read (16 bytes read) [ 6.829846] systemd[1]: Created slice system-getty.slice. [ 6.858529] random: systemd: uninitialized urandom read (16 bytes read) [ 6.873069] systemd[1]: Created slice system-modprobe.slice. [ 6.902406] random: systemd: uninitialized urandom read (16 bytes read) [ 6.917039] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.948386] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.979872] systemd[1]: Created slice system-wpa_supplicant.slice. [ 7.011743] systemd[1]: Created slice User and Session Slice. [ 7.038728] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.070680] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.103337] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.138692] systemd[1]: Reached target Local Encrypted Volumes. [ 7.166547] systemd[1]: Reached target Paths. [ 7.190468] systemd[1]: Reached target Remote File Systems. [ 7.218413] systemd[1]: Reached target Slices. [ 7.243128] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.274687] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.303178] systemd[1]: Listening on Journal Audit Socket. [ 7.331044] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.359059] systemd[1]: Listening on Journal Socket. [ 7.387194] systemd[1]: Listening on Network Service Netlink Socket. [ 7.419119] systemd[1]: Listening on udev Control Socket. [ 7.446917] systemd[1]: Listening on udev Kernel Socket. [ 7.480169] systemd[1]: Mounting Huge Pages File System... [ 7.512089] systemd[1]: Mounting POSIX Message Queue File System... [ 7.548292] systemd[1]: Mounting Kernel Debug File System... [ 7.580883] systemd[1]: Mounting Kernel Trace File System... [ 7.616739] systemd[1]: Starting Set the console keyboard layout... [ 7.652889] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.692438] systemd[1]: Starting Load Kernel Module drm... [ 7.728445] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.744263] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.775574] systemd[1]: Starting Journal Service... [ 7.811288] systemd[1]: Starting Load Kernel Modules... [ 7.837084] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.873130] systemd[1]: Starting Coldplug All udev Devices... [ 7.911675] EXT4-fs (mmcblk1p2): re-mounted. Opts: discard [ 7.915788] systemd[1]: Mounted Huge Pages File System. [ 7.955686] systemd[1]: Mounted POSIX Message Queue File System. [ 7.987123] systemd[1]: Mounted Kernel Debug File System. [ 8.015243] systemd[1]: Mounted Kernel Trace File System. [ 8.045959] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.080365] systemd[1]: modprobe@drm.service: Succeeded. [ 8.095114] systemd[1]: Finished Load Kernel Module drm. [ 8.126873] systemd[1]: Finished Load Kernel Modules. [ 8.155116] systemd[1]: Started Journal Service. [ 9.208658] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 9.241163] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 9.319126] iproc-rng200 fe104000.rng: hwrng registered [ 9.530324] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.546497] cfg80211: Loaded X.509 cert 'b...@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 9.561049] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 9.575604] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.594132] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 9.609185] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 9.668003] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 9.670178] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 9.705988] bcm2835_audio bcm2835_audio: card created with 8 channels [ 9.738620] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.753179] usbcore: registered new interface driver brcmfmac [ 9.757489] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 9.785343] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin [ 9.803421] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt [ 9.862245] random: crng init done [ 9.868707] random: 7 urandom warning(s) missed due to ratelimiting [ 9.933685] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.947554] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2) [ 9.959528] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 9.972413] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 9.993011] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 [ 10.028888] Adding 10485756k swap on /dev/mmcblk1p3. Priority:-2 extents:1 across:10485756k SSDscFS [ 10.048805] Bluetooth: Core ver 2.22 [ 10.056067] NET: Registered protocol family 31 [ 10.063832] Bluetooth: HCI device and connection manager initialized [ 10.074078] Bluetooth: HCI socket layer initialized [ 10.082413] Bluetooth: L2CAP socket layer initialized [ 10.091160] Bluetooth: SCO socket layer initialized [ 10.682009] audit: type=1400 audit(1600712920.731:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=394 comm="apparmor_parser" [ 10.701969] audit: type=1400 audit(1600712920.735:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=395 comm="apparmor_parser" [ 10.720704] audit: type=1400 audit(1600712920.735:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=395 comm="apparmor_parser" [ 16.641578] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 260.046099] audit: type=1400 audit(1601167761.953:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=7330 comm="apparmor_parser" [ 260.061617] audit: type=1400 audit(1601167761.957:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=7330 comm="apparmor_parser" [ 260.076954] audit: type=1400 audit(1601167761.957:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=7330 comm="apparmor_parser" ** Model information Hardware : BCM2711 Revision : 0000 Device Tree model: Raspberry Pi 4 Model B Rev 1.4 ** Loaded modules: nls_ascii(E) nls_cp437(E) vfat(E) fat(E) btsdio(E) bluetooth(E) jitterentropy_rng(E) drbg(E) ansi_cprng(E) ecdh_generic(E) ecc(E) snd_bcm2835(CE) bcm2835_v4l2(CE) brcmfmac(E) videobuf2_vmalloc(E) snd_pcm(E) videobuf2_memops(E) videobuf2_v4l2(E) snd_timer(E) brcmutil(E) videobuf2_common(E) snd(E) soundcore(E) cpufreq_dt(E) cfg80211(E) rfkill(E) raspberrypi_cpufreq(E) iproc_rng200(E) rng_core(E) vchiq(CE) pwm_bcm2835(E) bcm2835_wdt(E) leds_gpio(E) drm(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) dwc2(E) udc_core(E) sdhci_iproc(E) usbcore(E) sdhci_pltfm(E) i2c_bcm2835(E) gpio_regulator(E) phy_generic(E) sdhci(E) ** Network status: *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 14263222 12262 0 0 0 0 0 6 845293 6144 0 0 0 0 0 0 ** PCI devices: not available ** USB devices: not available -- System Information: Debian Release: bullseye/sid APT prefers testing APT policy: (500, 'testing') Architecture: armhf (armv7l) Kernel: Linux 5.8.0-2-armmp-lpae (SMP w/4 CPU threads) Kernel taint flags: TAINT_CRAP, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.8.0-2-armmp-lpae depends on: ii initramfs-tools [linux-initramfs-tool] 0.139 ii kmod 27+20200310-2 ii linux-base 4.6 Versions of packages linux-image-5.8.0-2-armmp-lpae recommends: ii apparmor 2.13.4-3 ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.8.0-2-armmp-lpae suggests: pn debian-kernel-handbook <none> pn linux-doc-5.8 <none> Versions of packages linux-image-5.8.0-2-armmp-lpae is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20200817-1 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20200817-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
