Package: src:linux
Version: 5.8.7-1
Severity: grave
Justification: renders package unusable
This version fails to load kernel modules (no issues with previous
Linux kernels provided by Debian). As a consequence, X does not work.
I've attached the dmesg output.
-- Package-specific info:
** Version:
Linux version 5.8.0-1-amd64 (debian-ker...@lists.debian.org) (gcc-10 (Debian
10.2.0-6) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.8.7-1
(2020-09-05)
** Command line:
BOOT_IMAGE=/vmlinuz-5.8.0-1-amd64 root=/dev/mapper/zira--vg-root ro quiet
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: Hewlett-Packard
product_name: HP ZBook 15 G2
product_version: A3008CD10003
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: M70 Ver. 01.08
board_vendor: Hewlett-Packard
board_name: 2253
board_version: KBC Version 03.10
** Loaded modules:
rfcomm
ipt_REJECT
nf_reject_ipv4
xt_multiport
nft_compat
nft_counter
nf_tables
nfnetlink
cmac
algif_hash
algif_skcipher
af_alg
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
bnep
btusb
btrtl
btbcm
iwlmvm
btintel
bluetooth
intel_rapl_msr
mac80211
libarc4
mei_wdt
intel_rapl_common
snd_hda_codec_realtek
jitterentropy_rng
binfmt_misc
iwlwifi
snd_hda_codec_generic
drbg
ledtrig_audio
x86_pkg_temp_thermal
snd_hda_codec_hdmi
ansi_cprng
intel_powerclamp
cfg80211
coretemp
ecdh_generic
hp_wmi
ecc
snd_hda_intel
sparse_keymap
rapl
snd_intel_dspcfg
uvcvideo
intel_cstate
snd_hda_codec
intel_uncore
videobuf2_vmalloc
videobuf2_memops
snd_hda_core
videobuf2_v4l2
videobuf2_common
iTCO_wdt
joydev
snd_hwdep
intel_pmc_bxt
videodev
snd_pcm
pcspkr
iTCO_vendor_support
serio_raw
mxm_wmi
wmi_bmof
mei_me
snd_timer
tpm_infineon
watchdog
sg
mc
rfkill
apple_mfi_fastcharge
at24
snd
mei
soundcore
evdev
tpm_tis
tpm_tis_core
tpm
hp_accel
lis3lv02d
hp_wireless
rng_core
ac
button
parport_pc
ppdev
drm
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
dm_crypt
dm_mod
sd_mod
sr_mod
cdrom
t10_pi
crc_t10dif
crct10dif_generic
hid_apple
hid_generic
usbhid
hid
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
rtsx_pci_sdmmc
mmc_core
ahci
libahci
libata
aesni_intel
xhci_pci
libaes
crypto_simd
xhci_hcd
cryptd
glue_helper
psmouse
ehci_pci
ehci_hcd
e1000e
i2c_i801
scsi_mod
i2c_smbus
usbcore
rtsx_pci
lpc_ich
ptp
pps_core
usb_common
battery
video
wmi
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 30:8d:99:25:ad:3f brd ff:ff:ff:ff:ff:ff
inet 192.168.1.3/24 brd 192.168.1.255 scope global dynamic noprefixroute
eth0
valid_lft 86221sec preferred_lft 86221sec
inet6 fe80::b735:e72d:ac2d:f50/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: wlp61s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state
DOWN group default qlen 1000
link/ether cc:3d:82:a9:e3:ea brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 31682 360 0 0 0 0 0 0 31682
360 0 0 0 0 0 0
eth0: 984114 1134 0 0 0 0 0 4 217083
945 0 0 0 0 0 0
wlp61s0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
1036 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
1008 incoming packets delivered
1077 requests sent out
20 outgoing packets dropped
548 dropped because of missing route
2 reassemblies required
1 packets reassembled ok
Icmp:
46 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
destination unreachable: 46
64 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 64
IcmpMsg:
InType3: 46
OutType3: 64
Tcp:
28 active connection openings
5 passive connection openings
9 failed connection attempts
2 connection resets received
0 connections established
648 segments received
721 segments sent out
9 segments retransmitted
0 bad segments received
31 resets sent
Udp:
412 packets received
40 packets to unknown port received
0 packet receive errors
463 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 3
UdpLite:
TcpExt:
6 TCP sockets finished time wait in fast timer
356 packet headers predicted
95 acknowledgments not containing data payload received
74 predicted acknowledgments
TCPSackRecovery: 1
Detected reordering 4 times using SACK
Detected reordering 1 times using time stamp
1 congestion windows partially recovered using Hoe heuristic
TCPLostRetransmit: 6
1 fast retransmits
TCPTimeouts: 7
TCPLossProbes: 1
TCPDSACKRecv: 1
11 connections reset due to unexpected data
2 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
TCPSackShifted: 2
TCPSackMerged: 5
TCPSackShiftFallback: 5
TCPRcvCoalesce: 33
TCPOrigDataSent: 245
TCPDelivered: 257
TcpTimeoutRehash: 2
IpExt:
InMcastPkts: 37
OutMcastPkts: 35
InBcastPkts: 3
OutBcastPkts: 1
InOctets: 966330
OutOctets: 211422
InMcastOctets: 4153
OutMcastOctets: 4121
InBcastOctets: 721
OutBcastOctets: 65
InNoECTPkts: 1324
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor DRAM Controller [8086:0c04] (rev 06)
Subsystem: Hewlett-Packard Company Xeon E3-1200 v3/4th Gen Core
Processor DRAM Controller [103c:2253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff [size=4K]
Memory behind bridge: d1000000-d20fffff [size=17M]
Prefetchable memory behind bridge: 0000000070000000-0000000081ffffff
[size=288M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company 8 Series/C220 Series Chipset Family
USB xHCI [103c:2253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at d2120000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series
Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Hewlett-Packard Company 8 Series/C220 Series Chipset Family
MEI Controller [103c:2253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 34
Region 0: Memory at d2138000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series
Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company 8 Series/C220 Series Chipset Family
KT Controller [103c:2253]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 6070 [size=8]
Region 1: Memory at d213b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection
I217-LM [8086:153a] (rev 04)
Subsystem: Hewlett-Packard Company Ethernet Connection I217-LM
[103c:2253]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at d2100000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d213a000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 6040 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 8 Series/C220 Series Chipset Family
USB EHCI [103c:2253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2136000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset
High Definition Audio Controller [8086:8c20] (rev 04)
Subsystem: Hewlett-Packard Company 8 Series/C220 Series Chipset High
Definition Audio Controller [103c:2253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at d2130000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=3a, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: b4000000-ca0fffff [size=353M]
Prefetchable memory behind bridge: 0000000090000000-00000000b1ffffff
[size=544M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 26
Bus: primary=00, secondary=3b, subordinate=5f, sec-latency=0
I/O behind bridge: 00003000-00004fff [size=8K]
Memory behind bridge: cc000000-d01fffff [size=66M]
Prefetchable memory behind bridge: 0000000060100000-00000000606fffff
[size=6M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 8 Series/C220 Series Chipset Family
USB EHCI [103c:2253]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d2135000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM87 Express LPC Controller
[8086:8c4f] (rev 04)
Subsystem: Hewlett-Packard Company QM87 Express LPC Controller
[103c:2253]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset
Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 04) (prog-if 01
[AHCI 1.0])
Subsystem: Hewlett-Packard Company 8 Series/C220 Series Chipset Family
6-port SATA Controller 1 [AHCI mode] [103c:2253]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 33
Region 0: I/O ports at 6068 [size=8]
Region 1: I/O ports at 607c [size=4]
Region 2: I/O ports at 6060 [size=8]
Region 3: I/O ports at 6078 [size=4]
Region 4: I/O ports at 6020 [size=32]
Region 5: Memory at d2134000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family
SMBus Controller [8086:8c22] (rev 04)
Subsystem: Hewlett-Packard Company 8 Series/C220 Series Chipset Family
SMBus Controller [103c:2253]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d2137000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ef80 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208GLM [Quadro
K610M] [10de:12b9] (rev a1) (prog-if 00 [VGA controller])
DeviceName: 0
Subsystem: Hewlett-Packard Company GK208GLM [Quadro K610M] [103c:2254]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 70000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 80000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 5000 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GK208 HDMI/DP Audio Controller
[10de:0e0f] (rev a1)
Subsystem: Hewlett-Packard Company GK208 HDMI/DP Audio Controller
[103c:2254]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
3b:00.0 PCI bridge [0604]: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2
4-Port/4-Lane Packet Switch [12d8:2404] (rev 05) (prog-if 00 [Normal decode])
DeviceName: WLAN
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=3b, secondary=3c, subordinate=5f, sec-latency=0
I/O behind bridge: 00003000-00004fff [size=8K]
Memory behind bridge: cc000000-d01fffff [size=66M]
Prefetchable memory behind bridge: 0000000060100000-00000000606fffff
[size=6M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
3c:01.0 PCI bridge [0604]: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2
4-Port/4-Lane Packet Switch [12d8:2404] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=3c, secondary=3d, subordinate=3d, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: d0100000-d01fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
3c:02.0 PCI bridge [0604]: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2
4-Port/4-Lane Packet Switch [12d8:2404] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Bus: primary=3c, secondary=3e, subordinate=5e, sec-latency=0
I/O behind bridge: 00003000-00004fff [size=8K]
Memory behind bridge: cc000000-cfffffff [size=64M]
Prefetchable memory behind bridge: 0000000060100000-00000000602fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
3c:03.0 PCI bridge [0604]: Pericom Semiconductor PI7C9X2G404 EL/SL PCIe2
4-Port/4-Lane Packet Switch [12d8:2404] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Bus: primary=3c, secondary=5f, subordinate=5f, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: d0000000-d00fffff [size=1M]
Prefetchable memory behind bridge: 0000000060300000-00000000604fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
3d:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1]
(rev 6b)
Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:c070]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 36
Region 0: Memory at d0100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
5f:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI
Express Card Reader [10ec:5249] (rev 01)
Subsystem: Hewlett-Packard Company RTS5249 PCI Express Card Reader
[103c:2253]
Physical Slot: 0-2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
** USB devices:
Bus 003 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 05c8:0374 Cheng Uei Precision Industry Co., Ltd
(Foxlink) HP EliteBook integrated HD Webcam
Bus 002 Device 009: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 008: ID 05ac:0221 Apple, Inc. Aluminum Keyboard (ISO)
Bus 002 Device 003: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard
Bus 002 Device 002: ID 138a:003f Validity Sensors, Inc. VFS495 Fingerprint
Reader
Bus 002 Device 006: ID 8087:07dc Intel Corp. Bluetooth wireless interface
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'stable-updates'), (500,
'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 5.8.0-1-amd64 (SMP w/8 CPU threads)
Locale: LANG=POSIX, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.8.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.137
ii kmod 27+20200310-2
ii linux-base 4.6
Versions of packages linux-image-5.8.0-1-amd64 recommends:
ii apparmor 2.13.4-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.8.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.04-9
ii linux-doc-5.8 5.8.7-1
Versions of packages linux-image-5.8.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20200817-1
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--
Vincent Lefèvre <vinc...@vinc17.net> - Web: <https://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <https://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / AriC project (LIP, ENS-Lyon)
[ 0.000000] microcode: microcode updated early to revision 0x28, date =
2019-11-12
[ 0.000000] Linux version 5.8.0-1-amd64 (debian-ker...@lists.debian.org)
(gcc-10 (Debian 10.2.0-6) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35) #1 SMP
Debian 5.8.7-1 (2020-09-05)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.8.0-1-amd64
root=/dev/mapper/zira--vg-root ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,
using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005cb7efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005cb7f000-0x000000005de7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000005de7f000-0x000000005df7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005df7f000-0x000000005dffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005dfff000-0x000000005dffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005e000000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000049dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ZBook 15 G2/2253, BIOS M70 Ver. 01.08
03/16/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2793.559 MHz processor
[ 0.000634] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000635] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000640] last_pfn = 0x49e000 max_arch_pfn = 0x400000000
[ 0.000644] MTRR default type: uncachable
[ 0.000644] MTRR fixed ranges enabled:
[ 0.000645] 00000-9FFFF write-back
[ 0.000646] A0000-BFFFF uncachable
[ 0.000647] C0000-FFFFF write-protect
[ 0.000647] MTRR variable ranges enabled:
[ 0.000648] 0 base 00FF000000 mask 7FFF000000 write-protect
[ 0.000649] 1 base 0000000000 mask 7FC0000000 write-back
[ 0.000650] 2 base 0040000000 mask 7FE0000000 write-back
[ 0.000650] 3 base 0100000000 mask 7F00000000 write-back
[ 0.000651] 4 base 0200000000 mask 7E00000000 write-back
[ 0.000652] 5 base 0400000000 mask 7F80000000 write-back
[ 0.000652] 6 base 0480000000 mask 7FE0000000 write-back
[ 0.000653] 7 base 049E000000 mask 7FFE000000 uncachable
[ 0.000653] 8 disabled
[ 0.000654] 9 disabled
[ 0.000933] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001048] last_pfn = 0x5e000 max_arch_pfn = 0x400000000
[ 0.008148] Using GB pages for direct mapping
[ 0.008443] RAMDISK: [mem 0x33725000-0x35b89fff]
[ 0.008449] ACPI: Early table checksum verification disabled
[ 0.008451] ACPI: RSDP 0x00000000000FC220 000024 (v02 HPQOEM)
[ 0.008454] ACPI: XSDT 0x000000005DFFD0E8 00009C (v01 HPQOEM SLIC-MPC
00000001 01000013)
[ 0.008458] ACPI: FACP 0x000000005DFFB000 00010C (v05 HPQOEM 2253
00000001 HP 00000001)
[ 0.008462] ACPI: DSDT 0x000000005DFCF000 026CBD (v02 HPQOEM 2253
00000001 INTL 20130927)
[ 0.008464] ACPI: FACS 0x000000005DF76000 000040
[ 0.008466] ACPI: HPET 0x000000005DFFA000 000038 (v01 HPQOEM 2253
00000001 HP 00000001)
[ 0.008468] ACPI: APIC 0x000000005DFF9000 0000BC (v01 HPQOEM 2253
00000001 HP 00000001)
[ 0.008470] ACPI: MCFG 0x000000005DFF8000 00003C (v01 HPQOEM 2253
00000001 HP 00000001)
[ 0.008472] ACPI: TCPA 0x000000005DFF6000 000032 (v02 HPQOEM 2253
00000000 HP 00000001)
[ 0.008474] ACPI: SSDT 0x000000005DFCC000 00042C (v01 HPQOEM SataAhci
00001000 INTL 20130927)
[ 0.008476] ACPI: SSDT 0x000000005DFCB000 00048A (v01 HPQOEM PtidDevc
00001000 INTL 20130927)
[ 0.008478] ACPI: FPDT 0x000000005DFC9000 000044 (v01 HPQOEM 2253
00000001 HP 00000001)
[ 0.008480] ACPI: BGRT 0x000000005DFC8000 000038 (v00 HPQOEM 2253
00000001 HP 00000001)
[ 0.008482] ACPI: SSDT 0x000000005DFC5000 001A24 (v01 HPQOEM NVIDIAGF
00000001 INTL 20130927)
[ 0.008484] ACPI: SSDT 0x000000005DFC2000 000544 (v01 PmRef Cpu0Ist
00003000 INTL 20130927)
[ 0.008486] ACPI: SSDT 0x000000005DFC1000 000B8F (v01 CpuRef CpuSsdt
00003000 INTL 20130927)
[ 0.008488] ACPI: SSDT 0x000000005DFC0000 0001D5 (v01 PmRef LakeTiny
00003000 INTL 20130927)
[ 0.008490] ACPI: SSDT 0x000000005DFBF000 000913 (v01 SaSsdt SaSsdt
00003000 INTL 20130927)
[ 0.008492] ACPI: ASF! 0x000000005DFF7000 0000A5 (v32 HPQOEM 2253
00000001 HP 00000001)
[ 0.008499] ACPI: Local APIC address 0xfee00000
[ 0.008534] No NUMA configuration found
[ 0.008534] Faking a node at [mem 0x0000000000000000-0x000000049dffffff]
[ 0.008537] NODE_DATA(0) allocated [mem 0x49dffb000-0x49dffffff]
[ 0.008568] Zone ranges:
[ 0.008569] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008570] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008570] Normal [mem 0x0000000100000000-0x000000049dffffff]
[ 0.008571] Device empty
[ 0.008572] Movable zone start for each node
[ 0.008572] Early memory node ranges
[ 0.008573] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.008574] node 0: [mem 0x0000000000100000-0x000000005cb7efff]
[ 0.008575] node 0: [mem 0x000000005dfff000-0x000000005dffffff]
[ 0.008575] node 0: [mem 0x0000000100000000-0x000000049dffffff]
[ 0.008729] Zeroed struct page in unavailable ranges: 21732 pages
[ 0.008730] Initmem setup node 0 [mem 0x0000000000001000-0x000000049dffffff]
[ 0.008731] On node 0 totalpages: 4172572
[ 0.008732] DMA zone: 64 pages used for memmap
[ 0.008732] DMA zone: 21 pages reserved
[ 0.008733] DMA zone: 3996 pages, LIFO batch:0
[ 0.008768] DMA32 zone: 5870 pages used for memmap
[ 0.008768] DMA32 zone: 375680 pages, LIFO batch:63
[ 0.012039] Normal zone: 59264 pages used for memmap
[ 0.012040] Normal zone: 3792896 pages, LIFO batch:63
[ 0.012423] ACPI: PM-Timer IO Port: 0x1808
[ 0.012424] ACPI: Local APIC address 0xfee00000
[ 0.012430] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.012430] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.012431] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.012431] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.012432] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.012432] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.012432] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.012433] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.012443] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.012444] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.012446] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.012447] ACPI: IRQ0 used by override.
[ 0.012447] ACPI: IRQ9 used by override.
[ 0.012449] Using ACPI (MADT) for SMP configuration information
[ 0.012450] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.012453] TSC deadline timer available
[ 0.012454] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.012468] PM: hibernation: Registered nosave memory: [mem
0x00000000-0x00000fff]
[ 0.012470] PM: hibernation: Registered nosave memory: [mem
0x0009d000-0x0009dfff]
[ 0.012470] PM: hibernation: Registered nosave memory: [mem
0x0009e000-0x0009ffff]
[ 0.012471] PM: hibernation: Registered nosave memory: [mem
0x000a0000-0x000dffff]
[ 0.012471] PM: hibernation: Registered nosave memory: [mem
0x000e0000-0x000fffff]
[ 0.012472] PM: hibernation: Registered nosave memory: [mem
0x5cb7f000-0x5de7efff]
[ 0.012473] PM: hibernation: Registered nosave memory: [mem
0x5de7f000-0x5df7efff]
[ 0.012473] PM: hibernation: Registered nosave memory: [mem
0x5df7f000-0x5dffefff]
[ 0.012474] PM: hibernation: Registered nosave memory: [mem
0x5e000000-0x5fffffff]
[ 0.012475] PM: hibernation: Registered nosave memory: [mem
0x60000000-0xdfffffff]
[ 0.012475] PM: hibernation: Registered nosave memory: [mem
0xe0000000-0xefffffff]
[ 0.012475] PM: hibernation: Registered nosave memory: [mem
0xf0000000-0xfebfffff]
[ 0.012476] PM: hibernation: Registered nosave memory: [mem
0xfec00000-0xfec00fff]
[ 0.012476] PM: hibernation: Registered nosave memory: [mem
0xfec01000-0xfed0ffff]
[ 0.012477] PM: hibernation: Registered nosave memory: [mem
0xfed10000-0xfed13fff]
[ 0.012477] PM: hibernation: Registered nosave memory: [mem
0xfed14000-0xfed17fff]
[ 0.012478] PM: hibernation: Registered nosave memory: [mem
0xfed18000-0xfed19fff]
[ 0.012478] PM: hibernation: Registered nosave memory: [mem
0xfed1a000-0xfed1bfff]
[ 0.012478] PM: hibernation: Registered nosave memory: [mem
0xfed1c000-0xfed1ffff]
[ 0.012479] PM: hibernation: Registered nosave memory: [mem
0xfed20000-0xfedfffff]
[ 0.012479] PM: hibernation: Registered nosave memory: [mem
0xfee00000-0xfee00fff]
[ 0.012480] PM: hibernation: Registered nosave memory: [mem
0xfee01000-0xff5fffff]
[ 0.012480] PM: hibernation: Registered nosave memory: [mem
0xff600000-0xffffffff]
[ 0.012482] [mem 0x60000000-0xdfffffff] available for PCI devices
[ 0.012483] Booting paravirtualized kernel on bare hardware
[ 0.012485] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.016174] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8
nr_node_ids:1
[ 0.016354] percpu: Embedded 55 pages/cpu s184856 r8192 d32232 u262144
[ 0.016359] pcpu-alloc: s184856 r8192 d32232 u262144 alloc=1*2097152
[ 0.016360] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.016377] Built 1 zonelists, mobility grouping on. Total pages: 4107353
[ 0.016378] Policy zone: Normal
[ 0.016379] Kernel command line: BOOT_IMAGE=/vmlinuz-5.8.0-1-amd64
root=/dev/mapper/zira--vg-root ro quiet
[ 0.017187] Dentry cache hash table entries: 2097152 (order: 12, 16777216
bytes, linear)
[ 0.017567] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes, linear)
[ 0.017629] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.029402] Memory: 1546888K/16690288K available (12291K kernel code, 1302K
rwdata, 3880K rodata, 1620K init, 1816K bss, 418524K reserved, 0K cma-reserved)
[ 0.029408] random: get_random_u64 called from
__kmem_cache_create+0x3e/0x600 with crng_init=0
[ 0.029527] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.029537] Kernel/User page tables isolation: enabled
[ 0.029554] ftrace: allocating 34334 entries in 135 pages
[ 0.040852] ftrace: allocated 135 pages with 4 groups
[ 0.040946] rcu: Hierarchical RCU implementation.
[ 0.040947] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.040948] Rude variant of Tasks RCU enabled.
[ 0.040949] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.040949] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.043824] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[ 0.044102] random: crng done (trusting CPU's manufacturer)
[ 0.044120] Console: colour dummy device 80x25
[ 0.044124] printk: console [tty0] enabled
[ 0.044139] ACPI: Core revision 20200528
[ 0.044306] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484882848 ns
[ 0.044318] APIC: Switch to symmetric I/O mode setup
[ 0.044382] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.044795] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064319] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
0x28447c42297, max_idle_ns: 440795288309 ns
[ 0.064322] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5587.11 BogoMIPS (lpj=11174236)
[ 0.064324] pid_max: default: 32768 minimum: 301
[ 0.064348] LSM: Security Framework initializing
[ 0.064353] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.064372] AppArmor: AppArmor initialized
[ 0.064373] TOMOYO Linux initialized
[ 0.064412] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes,
linear)
[ 0.064441] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
bytes, linear)
[ 0.064649] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.064675] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.064689] process: using mwait in idle threads
[ 0.064691] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.064692] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.064694] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user
pointer sanitization
[ 0.064695] Spectre V2 : Mitigation: Full generic retpoline
[ 0.064696] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on
context switch
[ 0.064696] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.064697] Spectre V2 : mitigation: Enabling conditional Indirect Branch
Prediction Barrier
[ 0.064698] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.064699] Speculative Store Bypass: Mitigation: Speculative Store Bypass
disabled via prctl and seccomp
[ 0.064702] SRBDS: Mitigation: Microcode
[ 0.064702] MDS: Mitigation: Clear CPU buffers
[ 0.064824] Freeing SMP alternatives memory: 32K
[ 0.066606] smpboot: CPU0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz
(family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.066702] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR,
full-width counters, Intel PMU driver.
[ 0.066717] ... version: 3
[ 0.066717] ... bit width: 48
[ 0.066717] ... generic registers: 4
[ 0.066718] ... value mask: 0000ffffffffffff
[ 0.066718] ... max period: 00007fffffffffff
[ 0.066719] ... fixed-purpose events: 3
[ 0.066719] ... event mask: 000000070000000f
[ 0.066747] rcu: Hierarchical SRCU implementation.
[ 0.067377] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.067439] smp: Bringing up secondary CPUs ...
[ 0.067503] x86: Booting SMP configuration:
[ 0.067504] .... node #0, CPUs: #1
[ 0.068320] MDS CPU bug present and SMT on, data leak possible. See
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more
details.
[ 0.068320] #2 #3 #4 #5 #6 #7
[ 0.072894] smp: Brought up 1 node, 8 CPUs
[ 0.072894] smpboot: Max logical packages: 1
[ 0.072894] smpboot: Total of 8 processors activated (44696.94 BogoMIPS)
[ 0.098985] node 0 deferred pages initialised in 24ms
[ 0.098985] devtmpfs: initialized
[ 0.098985] x86/mm: Memory block size: 128MB
[ 0.100633] PM: Registering ACPI NVS region [mem 0x5de7f000-0x5df7efff]
(1048576 bytes)
[ 0.100633] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.100633] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.100633] pinctrl core: initialized pinctrl subsystem
[ 0.100633] thermal_sys: Registered thermal governor 'fair_share'
[ 0.100633] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.100633] thermal_sys: Registered thermal governor 'step_wise'
[ 0.100633] thermal_sys: Registered thermal governor 'user_space'
[ 0.100633] NET: Registered protocol family 16
[ 0.100634] audit: initializing netlink subsys (disabled)
[ 0.100640] audit: type=2000 audit(1599564667.056:1): state=initialized
audit_enabled=0 res=1
[ 0.100640] cpuidle: using governor ladder
[ 0.100640] cpuidle: using governor menu
[ 0.100640] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.100640] ACPI: bus type PCI registered
[ 0.100640] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.100640] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.100640] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.100640] PCI: Using configuration type 1 for base access
[ 0.100640] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.100759] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.100764] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.100764] mtrr: probably your BIOS does not setup all CPUs.
[ 0.100764] mtrr: corrected configuration.
[ 0.101066] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.101066] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.236667] ACPI: Added _OSI(Module Device)
[ 0.236667] ACPI: Added _OSI(Processor Device)
[ 0.236667] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.236667] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.236667] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.236667] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.236667] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.248879] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.249763] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.253352] ACPI: Dynamic OEM Table Load:
[ 0.253356] ACPI: SSDT 0xFFFF8AA2476ADC00 0003F3 (v01 PmRef Cpu0Cst
00003001 INTL 20130927)
[ 0.254136] ACPI: Dynamic OEM Table Load:
[ 0.254140] ACPI: SSDT 0xFFFF8AA5BFC7C800 0005DB (v01 PmRef ApIst
00003000 INTL 20130927)
[ 0.254949] ACPI: Dynamic OEM Table Load:
[ 0.254953] ACPI: SSDT 0xFFFF8AA2476EAC00 000119 (v01 PmRef ApCst
00003000 INTL 20130927)
[ 0.256814] ACPI: EC: EC started
[ 0.256814] ACPI: EC: interrupt blocked
[ 4.232476] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 4.232478] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle
transactions
[ 4.232479] ACPI: Interpreter enabled
[ 4.232505] ACPI: (supports S0 S3 S4 S5)
[ 4.232505] ACPI: Using IOAPIC for interrupt routing
[ 4.232520] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 4.232783] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 4.234908] ACPI: Power Resource [APPR] (off)
[ 4.236916] ACPI: Power Resource [COMP] (off)
[ 4.237261] ACPI: Power Resource [LPP] (on)
[ 4.239927] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 4.239932] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI HPX-Type3]
[ 4.240659] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug
LTR]
[ 4.241581] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER
PCIeCapability]
[ 4.241582] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS
configuration
[ 4.242006] PCI host bridge to bus 0000:00
[ 4.242007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 4.242008] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 4.242009] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 4.242010] pci_bus 0000:00: root bus resource [mem 0x60000000-0xdfffffff
window]
[ 4.242011] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff
window]
[ 4.242011] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff
window]
[ 4.242012] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff
window]
[ 4.242013] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 4.242021] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 4.242126] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 4.242167] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 4.242309] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 4.242327] pci 0000:00:14.0: reg 0x10: [mem 0xd2120000-0xd212ffff 64bit]
[ 4.242380] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 4.242472] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 4.242492] pci 0000:00:16.0: reg 0x10: [mem 0xd2138000-0xd213800f 64bit]
[ 4.242555] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 4.242636] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[ 4.242653] pci 0000:00:16.3: reg 0x10: [io 0x6070-0x6077]
[ 4.242660] pci 0000:00:16.3: reg 0x14: [mem 0xd213b000-0xd213bfff]
[ 4.242798] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 4.242815] pci 0000:00:19.0: reg 0x10: [mem 0xd2100000-0xd211ffff]
[ 4.242822] pci 0000:00:19.0: reg 0x14: [mem 0xd213a000-0xd213afff]
[ 4.242829] pci 0000:00:19.0: reg 0x18: [io 0x6040-0x605f]
[ 4.242886] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 4.242976] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 4.242995] pci 0000:00:1a.0: reg 0x10: [mem 0xd2136000-0xd21363ff]
[ 4.243077] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 4.243170] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 4.243188] pci 0000:00:1b.0: reg 0x10: [mem 0xd2130000-0xd2133fff 64bit]
[ 4.243257] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 4.243348] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 4.243485] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 4.243619] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 4.243699] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 4.243830] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 4.243850] pci 0000:00:1d.0: reg 0x10: [mem 0xd2135000-0xd21353ff]
[ 4.243933] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 4.244028] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
[ 4.244214] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 4.244229] pci 0000:00:1f.2: reg 0x10: [io 0x6068-0x606f]
[ 4.244235] pci 0000:00:1f.2: reg 0x14: [io 0x607c-0x607f]
[ 4.244241] pci 0000:00:1f.2: reg 0x18: [io 0x6060-0x6067]
[ 4.244248] pci 0000:00:1f.2: reg 0x1c: [io 0x6078-0x607b]
[ 4.244254] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f]
[ 4.244261] pci 0000:00:1f.2: reg 0x24: [mem 0xd2134000-0xd21347ff]
[ 4.244299] pci 0000:00:1f.2: PME# supported from D3hot
[ 4.244387] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 4.244404] pci 0000:00:1f.3: reg 0x10: [mem 0xd2137000-0xd21370ff 64bit]
[ 4.244420] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
[ 4.244555] pci 0000:01:00.0: [10de:12b9] type 00 class 0x030000
[ 4.244573] pci 0000:01:00.0: reg 0x10: [mem 0xd1000000-0xd1ffffff]
[ 4.244582] pci 0000:01:00.0: reg 0x14: [mem 0x70000000-0x7fffffff 64bit
pref]
[ 4.244592] pci 0000:01:00.0: reg 0x1c: [mem 0x80000000-0x81ffffff 64bit
pref]
[ 4.244598] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 4.244605] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 4.244682] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited
by 2.5 GT/s PCIe x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8.0 GT/s
PCIe x8 link)
[ 4.244866] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
[ 4.244880] pci 0000:01:00.1: reg 0x10: [mem 0xd2000000-0xd2003fff]
[ 4.244998] pci 0000:00:01.0: ASPM: current common clock configuration is
inconsistent, reconfiguring
[ 4.256352] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 4.256354] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 4.256356] pci 0000:00:01.0: bridge window [mem 0xd1000000-0xd20fffff]
[ 4.256358] pci 0000:00:01.0: bridge window [mem 0x70000000-0x81ffffff
64bit pref]
[ 4.256407] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
[ 4.256412] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
[ 4.256416] pci 0000:00:1c.0: bridge window [mem 0x90000000-0xb1ffffff
64bit pref]
[ 4.256462] pci 0000:3b:00.0: [12d8:2404] type 01 class 0x060400
[ 4.256607] pci 0000:3b:00.0: supports D1 D2
[ 4.256607] pci 0000:3b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 4.256708] pci 0000:00:1c.6: PCI bridge to [bus 3b-5f]
[ 4.256711] pci 0000:00:1c.6: bridge window [io 0x3000-0x4fff]
[ 4.256713] pci 0000:00:1c.6: bridge window [mem 0xcc000000-0xd01fffff]
[ 4.256772] pci 0000:3c:01.0: [12d8:2404] type 01 class 0x060400
[ 4.256915] pci 0000:3c:01.0: supports D1 D2
[ 4.256915] pci 0000:3c:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 4.257000] pci 0000:3c:02.0: [12d8:2404] type 01 class 0x060400
[ 4.257144] pci 0000:3c:02.0: supports D1 D2
[ 4.257145] pci 0000:3c:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 4.257228] pci 0000:3c:03.0: [12d8:2404] type 01 class 0x060400
[ 4.257372] pci 0000:3c:03.0: supports D1 D2
[ 4.257372] pci 0000:3c:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 4.257476] pci 0000:3b:00.0: PCI bridge to [bus 3c-5f]
[ 4.257482] pci 0000:3b:00.0: bridge window [io 0x3000-0x4fff]
[ 4.257486] pci 0000:3b:00.0: bridge window [mem 0xcc000000-0xd01fffff]
[ 4.257634] pci 0000:3d:00.0: [8086:08b1] type 00 class 0x028000
[ 4.257713] pci 0000:3d:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 4.258214] pci 0000:3d:00.0: PME# supported from D0 D3hot D3cold
[ 4.258705] pci 0000:3c:01.0: PCI bridge to [bus 3d]
[ 4.258713] pci 0000:3c:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 4.258760] pci 0000:3c:02.0: PCI bridge to [bus 3e-5e]
[ 4.258766] pci 0000:3c:02.0: bridge window [io 0x3000-0x4fff]
[ 4.258769] pci 0000:3c:02.0: bridge window [mem 0xcc000000-0xcfffffff]
[ 4.258836] pci 0000:5f:00.0: [10ec:5249] type 00 class 0xff0000
[ 4.258881] pci 0000:5f:00.0: reg 0x10: [mem 0xd0000000-0xd0000fff]
[ 4.259111] pci 0000:5f:00.0: supports D1 D2
[ 4.259112] pci 0000:5f:00.0: PME# supported from D1 D2 D3hot D3cold
[ 4.259294] pci 0000:3c:03.0: PCI bridge to [bus 5f]
[ 4.259302] pci 0000:3c:03.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 4.260200] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.260237] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.260272] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.260306] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.260344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 4.260378] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 4.260412] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.260446] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 4.260800] ACPI: EC: interrupt unblocked
[ 4.260801] ACPI: EC: event unblocked
[ 4.260806] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 4.260806] ACPI: EC: GPE=0x16
[ 4.260807] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 4.260808] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and
events
[ 4.260844] iommu: Default domain type: Translated
[ 4.260855] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 4.260855] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 4.260855] pci 0000:01:00.0: vgaarb: bridge control possible
[ 4.260855] vgaarb: loaded
[ 4.260855] EDAC MC: Ver: 3.0.0
[ 4.260855] NetLabel: Initializing
[ 4.260855] NetLabel: domain hash size = 128
[ 4.260855] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 4.260855] NetLabel: unlabeled traffic allowed by default
[ 4.260855] PCI: Using ACPI for IRQ routing
[ 4.267038] PCI: pci_cache_line_size set to 64 bytes
[ 4.267242] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 4.267243] e820: reserve RAM buffer [mem 0x5cb7f000-0x5fffffff]
[ 4.267243] e820: reserve RAM buffer [mem 0x5e000000-0x5fffffff]
[ 4.267244] e820: reserve RAM buffer [mem 0x49e000000-0x49fffffff]
[ 4.267681] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 4.267684] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 4.269342] clocksource: Switched to clocksource tsc-early
[ 4.277241] VFS: Disk quotas dquot_6.6.0
[ 4.277254] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.277352] AppArmor: AppArmor Filesystem Enabled
[ 4.277367] pnp: PnP ACPI init
[ 4.277534] pnp 00:00: disabling [mem 0x00000000-0x00000fff] because it
overlaps 0000:3d:00.0 BAR 0 [mem 0x00000000-0x00001fff 64bit]
[ 4.277560] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 4.277561] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 4.277562] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 4.277563] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 4.277564] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 4.277565] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 4.277566] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 4.277567] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 4.277568] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 4.277569] system 00:00: [mem 0x60010000-0x6001ffff] has been reserved
[ 4.277570] system 00:00: [mem 0x60000000-0x6000ffff] has been reserved
[ 4.277574] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.277763] system 00:01: [io 0x0200-0x020f] has been reserved
[ 4.277764] system 00:01: [io 0x0220-0x027f] has been reserved
[ 4.277765] system 00:01: [io 0xffff] has been reserved
[ 4.277766] system 00:01: [io 0xffff] has been reserved
[ 4.277767] system 00:01: [io 0xffff] has been reserved
[ 4.277767] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 4.277768] system 00:01: [io 0xef80-0xef9f] has been reserved
[ 4.277771] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.277809] system 00:02: [io 0x0800-0x087f] has been reserved
[ 4.277812] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.277827] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 4.278168] pnp 00:04: [dma 0 disabled]
[ 4.278216] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 4.278234] pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303
(active)
[ 4.278247] pnp 00:06: Plug and Play ACPI device, IDs SYN3023 SYN0100
SYN0002 PNP0f13 (active)
[ 4.278656] pnp 00:07: Plug and Play ACPI device, IDs IFX0102 PNP0c31
(active)
[ 4.278686] pnp: PnP ACPI: found 8 devices
[ 4.284151] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 4.284197] NET: Registered protocol family 2
[ 4.284310] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5,
131072 bytes, linear)
[ 4.284386] TCP established hash table entries: 131072 (order: 8, 1048576
bytes, linear)
[ 4.284545] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes,
linear)
[ 4.284612] TCP: Hash tables configured (established 131072 bind 65536)
[ 4.284650] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 4.284688] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes,
linear)
[ 4.284741] NET: Registered protocol family 1
[ 4.284746] NET: Registered protocol family 44
[ 4.284750] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff
pref]: no compatible bridge window
[ 4.284755] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus
02-3a] add_size 1000
[ 4.284757] pci 0000:3c:02.0: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 3e-5e] add_size 200000 add_align 100000
[ 4.284759] pci 0000:3c:03.0: bridge window [io 0x1000-0x0fff] to [bus 5f]
add_size 1000
[ 4.284760] pci 0000:3c:03.0: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 5f] add_size 200000 add_align 100000
[ 4.284762] pci 0000:3b:00.0: bridge window [mem 0x00100000-0x002fffff 64bit
pref] to [bus 3c-5f] add_size 400000 add_align 100000
[ 4.284763] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x002fffff 64bit
pref] to [bus 3b-5f] add_size 400000 add_align 100000
[ 4.284771] pci 0000:00:1c.6: BAR 15: assigned [mem 0x60100000-0x606fffff
64bit pref]
[ 4.284773] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 4.284775] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2080000-0xd20fffff
pref]
[ 4.284776] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 4.284778] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 4.284780] pci 0000:00:01.0: bridge window [mem 0xd1000000-0xd20fffff]
[ 4.284782] pci 0000:00:01.0: bridge window [mem 0x70000000-0x81ffffff
64bit pref]
[ 4.284785] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
[ 4.284787] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 4.284791] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
[ 4.284794] pci 0000:00:1c.0: bridge window [mem 0x90000000-0xb1ffffff
64bit pref]
[ 4.284800] pci 0000:3b:00.0: BAR 15: assigned [mem 0x60100000-0x606fffff
64bit pref]
[ 4.284802] pci 0000:3c:02.0: BAR 15: assigned [mem 0x60100000-0x602fffff
64bit pref]
[ 4.284803] pci 0000:3c:03.0: BAR 15: assigned [mem 0x60300000-0x604fffff
64bit pref]
[ 4.284804] pci 0000:3c:03.0: BAR 13: no space for [io size 0x1000]
[ 4.284805] pci 0000:3c:03.0: BAR 13: failed to assign [io size 0x1000]
[ 4.284807] pci 0000:3c:03.0: BAR 13: no space for [io size 0x1000]
[ 4.284807] pci 0000:3c:03.0: BAR 13: failed to assign [io size 0x1000]
[ 4.284809] pci 0000:3d:00.0: BAR 0: assigned [mem 0xd0100000-0xd0101fff
64bit]
[ 4.284906] pci 0000:3c:01.0: PCI bridge to [bus 3d]
[ 4.284911] pci 0000:3c:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 4.284919] pci 0000:3c:02.0: PCI bridge to [bus 3e-5e]
[ 4.284922] pci 0000:3c:02.0: bridge window [io 0x3000-0x4fff]
[ 4.284926] pci 0000:3c:02.0: bridge window [mem 0xcc000000-0xcfffffff]
[ 4.284930] pci 0000:3c:02.0: bridge window [mem 0x60100000-0x602fffff
64bit pref]
[ 4.284936] pci 0000:3c:03.0: PCI bridge to [bus 5f]
[ 4.284941] pci 0000:3c:03.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 4.284945] pci 0000:3c:03.0: bridge window [mem 0x60300000-0x604fffff
64bit pref]
[ 4.284951] pci 0000:3b:00.0: PCI bridge to [bus 3c-5f]
[ 4.284953] pci 0000:3b:00.0: bridge window [io 0x3000-0x4fff]
[ 4.284958] pci 0000:3b:00.0: bridge window [mem 0xcc000000-0xd01fffff]
[ 4.284962] pci 0000:3b:00.0: bridge window [mem 0x60100000-0x606fffff
64bit pref]
[ 4.284968] pci 0000:00:1c.6: PCI bridge to [bus 3b-5f]
[ 4.284970] pci 0000:00:1c.6: bridge window [io 0x3000-0x4fff]
[ 4.284974] pci 0000:00:1c.6: bridge window [mem 0xcc000000-0xd01fffff]
[ 4.284977] pci 0000:00:1c.6: bridge window [mem 0x60100000-0x606fffff
64bit pref]
[ 4.284982] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 4.284983] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 4.284984] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 4.284985] pci_bus 0000:00: resource 7 [mem 0x60000000-0xdfffffff window]
[ 4.284986] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
[ 4.284986] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
[ 4.284987] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
[ 4.284988] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 4.284989] pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd20fffff]
[ 4.284990] pci_bus 0000:01: resource 2 [mem 0x70000000-0x81ffffff 64bit
pref]
[ 4.284991] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 4.284991] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
[ 4.284992] pci_bus 0000:02: resource 2 [mem 0x90000000-0xb1ffffff 64bit
pref]
[ 4.284993] pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
[ 4.284994] pci_bus 0000:3b: resource 1 [mem 0xcc000000-0xd01fffff]
[ 4.284995] pci_bus 0000:3b: resource 2 [mem 0x60100000-0x606fffff 64bit
pref]
[ 4.284995] pci_bus 0000:3c: resource 0 [io 0x3000-0x4fff]
[ 4.284996] pci_bus 0000:3c: resource 1 [mem 0xcc000000-0xd01fffff]
[ 4.284997] pci_bus 0000:3c: resource 2 [mem 0x60100000-0x606fffff 64bit
pref]
[ 4.284998] pci_bus 0000:3d: resource 1 [mem 0xd0100000-0xd01fffff]
[ 4.284999] pci_bus 0000:3e: resource 0 [io 0x3000-0x4fff]
[ 4.284999] pci_bus 0000:3e: resource 1 [mem 0xcc000000-0xcfffffff]
[ 4.285000] pci_bus 0000:3e: resource 2 [mem 0x60100000-0x602fffff 64bit
pref]
[ 4.285001] pci_bus 0000:5f: resource 1 [mem 0xd0000000-0xd00fffff]
[ 4.285002] pci_bus 0000:5f: resource 2 [mem 0x60300000-0x604fffff 64bit
pref]
[ 4.285073] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 4.285613] pci 0000:01:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 4.285624] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 4.285719] PCI: CLS 64 bytes, default 64
[ 4.285781] Trying to unpack rootfs image as initramfs...
[ 4.770108] Freeing initrd memory: 37268K
[ 4.770179] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.770181] software IO TLB: mapped [mem 0x58b7f000-0x5cb7f000] (64MB)
[ 4.770592] Initialise system trusted keyrings
[ 4.770600] Key type blacklist registered
[ 4.770637] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 4.771496] zbud: loaded
[ 4.771625] integrity: Platform Keyring initialized
[ 4.771626] Key type asymmetric registered
[ 4.771627] Asymmetric key parser 'x509' registered
[ 4.771632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
251)
[ 4.771671] io scheduler mq-deadline registered
[ 4.771916] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[ 4.772087] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[ 4.772108] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL-
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 4.772308] pcieport 0000:00:1c.6: PME: Signaling with IRQ 26
[ 4.772655] pcieport 0000:3c:02.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL-
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+
[ 4.772893] pcieport 0000:3c:03.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL-
AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+
[ 4.773071] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.773080] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 4.773080] vesafb: scrolling: redraw
[ 4.773081] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.773095] vesafb: framebuffer at 0x81000000, mapped to 0x000000001ef83502,
using 3072k, total 3072k
[ 4.773159] Console: switching to colour frame buffer device 128x48
[ 4.822107] fb0: VESA VGA frame buffer device
[ 4.822132] intel_idle: MWAIT substates: 0x42120
[ 4.822133] intel_idle: v0.5.1 model 0x3C
[ 4.822506] intel_idle: Local APIC timer is reliable in all C-states
[ 4.847605] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.847606] ACPI: Thermal Zone [CPUZ] (66 C)
[ 4.871858] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.871860] ACPI: Thermal Zone [GFXZ] (55 C)
[ 4.887012] thermal LNXTHERM:02: registered as thermal_zone2
[ 4.887013] ACPI: Thermal Zone [EXTZ] (0 C)
[ 4.902154] thermal LNXTHERM:03: registered as thermal_zone3
[ 4.902156] ACPI: Thermal Zone [LOCZ] (85 C)
[ 4.917356] thermal LNXTHERM:04: registered as thermal_zone4
[ 4.917358] ACPI: Thermal Zone [BATZ] (28 C)
[ 4.917671] thermal LNXTHERM:05: registered as thermal_zone5
[ 4.917672] ACPI: Thermal Zone [PCHZ] (127 C)
[ 4.917822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.918322] 0000:00:16.3: ttyS0 at I/O 0x6070 (irq = 19, base_baud = 115200)
is a 16550A
[ 4.918510] Linux agpgart interface v0.103
[ 4.918538] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[ 4.918539] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 4.918935] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 4.920133] i8042: Detected active multiplexing controller, rev 1.1
[ 4.920741] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.920744] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.920766] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.920779] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.920792] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.920861] mousedev: PS/2 mouse device common for all mice
[ 4.920890] rtc_cmos 00:03: RTC can wake from S4
[ 4.921044] rtc_cmos 00:03: registered as rtc0
[ 4.921087] rtc_cmos 00:03: setting system clock to 2020-09-08T11:31:12 UTC
(1599564672)
[ 4.921098] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 4.921106] intel_pstate: Intel P-state driver initializing
[ 4.921377] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.921568] NET: Registered protocol family 10
[ 4.927064] Segment Routing with IPv6
[ 4.927078] mip6: Mobile IPv6
[ 4.927079] NET: Registered protocol family 17
[ 4.927144] mpls_gso: MPLS GSO support
[ 4.927738] microcode: sig=0x306c3, pf=0x10, revision=0x28
[ 4.927787] microcode: Microcode Update Driver: v2.2.
[ 4.927789] IPI shorthand broadcast: enabled
[ 4.927795] sched_clock: Marking stable (4927379663, 305527)->(4935392431,
-7707241)
[ 4.927884] registered taskstats version 1
[ 4.927885] Loading compiled-in X.509 certificates
[ 4.945487] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 4.953382] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 4.953391] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 4.953411] zswap: loaded using pool lzo/zbud
[ 4.953800] Key type ._fscrypt registered
[ 4.953800] Key type .fscrypt registered
[ 4.953801] Key type fscrypt-provisioning registered
[ 4.953829] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.954885] Freeing unused kernel image (initmem) memory: 1620K
[ 4.984485] Write protecting the kernel read-only data: 18432k
[ 4.985846] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 4.986120] Freeing unused kernel image (rodata/data gap) memory: 216K
[ 5.147958] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.147960] x86/mm: Checking user space page tables
[ 5.182122] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.182132] Run /init as init process
[ 5.182132] with arguments:
[ 5.182133] /init
[ 5.182133] with environment:
[ 5.182134] HOME=/
[ 5.182134] TERM=linux
[ 5.182134] BOOT_IMAGE=/vmlinuz-5.8.0-1-amd64
[ 5.270873] acpi PNP0C14:01: duplicate WMI GUID
05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 5.271754] ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
[ 5.274102] acpi device:01: registered as cooling_device8
[ 5.274179] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[ 5.278426] pps_core: LinuxPPS API ver. 1 registered
[ 5.278427] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 5.279871] PTP clock support registered
[ 5.280672] ACPI Warning: SystemIO range
0x0000000000001828-0x000000000000182F conflicts with OpRegion
0x0000000000001800-0x000000000000187F (\PMIO) (20200528/utaddress-204)
[ 5.280677] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 5.280680] ACPI Warning: SystemIO range
0x0000000000000840-0x000000000000084F conflicts with OpRegion
0x0000000000000800-0x0000000000000BFF (\GPIO) (20200528/utaddress-204)
[ 5.280683] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 5.280683] ACPI Warning: SystemIO range
0x0000000000000830-0x000000000000083F conflicts with OpRegion
0x0000000000000800-0x000000000000083F (\GPRL) (20200528/utaddress-204)
[ 5.280686] ACPI Warning: SystemIO range
0x0000000000000830-0x000000000000083F conflicts with OpRegion
0x0000000000000800-0x0000000000000BFF (\GPIO) (20200528/utaddress-204)
[ 5.280688] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 5.280689] ACPI Warning: SystemIO range
0x0000000000000800-0x000000000000082F conflicts with OpRegion
0x0000000000000810-0x0000000000000813 (\_PR.IO_D) (20200528/utaddress-204)
[ 5.280692] ACPI Warning: SystemIO range
0x0000000000000800-0x000000000000082F conflicts with OpRegion
0x0000000000000800-0x000000000000083F (\GPRL) (20200528/utaddress-204)
[ 5.280694] ACPI Warning: SystemIO range
0x0000000000000800-0x000000000000082F conflicts with OpRegion
0x0000000000000800-0x0000000000000BFF (\GPIO) (20200528/utaddress-204)
[ 5.280697] ACPI Warning: SystemIO range
0x0000000000000800-0x000000000000082F conflicts with OpRegion
0x0000000000000810-0x0000000000000813 (\IO_D) (20200528/utaddress-204)
[ 5.280699] ACPI Warning: SystemIO range
0x0000000000000800-0x000000000000082F conflicts with OpRegion
0x0000000000000800-0x000000000000080F (\IO_T) (20200528/utaddress-204)
[ 5.280701] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 5.280702] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.290072] ACPI: bus type USB registered
[ 5.290089] usbcore: registered new interface driver usbfs
[ 5.290096] usbcore: registered new interface driver hub
[ 5.290119] usbcore: registered new device driver usb
[ 5.292297] SCSI subsystem initialized
[ 5.292404] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 5.292434] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.292928] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 5.293361] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 5.293837] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 5.295265] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.295265] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.295446] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to
dynamic conservative mode
[ 5.296037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.296097] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 5.296185] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 5.296910] ehci-pci: EHCI PCI platform driver
[ 5.297063] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 5.297069] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 5.297082] ehci-pci 0000:00:1a.0: debug port 2
[ 5.301005] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 5.301290] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd2136000
[ 5.301546] cryptd: max_cpu_qlen set to 1000
[ 5.313209] AVX2 version of gcm_enc/dec engaged.
[ 5.313210] AES CTR mode by8 optimization enabled
[ 5.316344] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 5.316436] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.08
[ 5.316438] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.316439] usb usb1: Product: EHCI Host Controller
[ 5.316440] usb usb1: Manufacturer: Linux 5.8.0-1-amd64 ehci_hcd
[ 5.316441] usb usb1: SerialNumber: 0000:00:1a.0
[ 5.316581] hub 1-0:1.0: USB hub found
[ 5.316594] hub 1-0:1.0: 3 ports detected
[ 5.316845] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.316855] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 5.317699] libata version 3.00 loaded.
[ 5.317923] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100
quirks 0x0000000000009810
[ 5.317928] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 5.318101] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.08
[ 5.318103] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.318104] usb usb2: Product: xHCI Host Controller
[ 5.318105] usb usb2: Manufacturer: Linux 5.8.0-1-amd64 xhci-hcd
[ 5.318106] usb usb2: SerialNumber: 0000:00:14.0
[ 5.318220] hub 2-0:1.0: USB hub found
[ 5.318237] hub 2-0:1.0: 15 ports detected
[ 5.318926] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 5.318933] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 3
[ 5.318949] ehci-pci 0000:00:1d.0: debug port 2
[ 5.318968] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.318972] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 4
[ 5.318974] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 5.319014] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 5.08
[ 5.319016] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.319017] usb usb4: Product: xHCI Host Controller
[ 5.319018] usb usb4: Manufacturer: Linux 5.8.0-1-amd64 xhci-hcd
[ 5.319019] usb usb4: SerialNumber: 0000:00:14.0
[ 5.319120] hub 4-0:1.0: USB hub found
[ 5.319134] hub 4-0:1.0: 6 ports detected
[ 5.319262] usb: port power management may be unreliable
[ 5.321771] ahci 0000:00:1f.2: version 3.0
[ 5.321948] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 5.321978] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf
impl SATA mode
[ 5.321979] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum
part ems sxs apst
[ 5.322859] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 5.322875] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd2135000
[ 5.336402] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 5.336503] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.08
[ 5.336505] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.336506] usb usb3: Product: EHCI Host Controller
[ 5.336507] usb usb3: Manufacturer: Linux 5.8.0-1-amd64 ehci_hcd
[ 5.336508] usb usb3: SerialNumber: 0000:00:1d.0
[ 5.336674] hub 3-0:1.0: USB hub found
[ 5.336684] hub 3-0:1.0: 3 ports detected
[ 5.357415] scsi host0: ahci
[ 5.357658] scsi host1: ahci
[ 5.357834] scsi host2: ahci
[ 5.358023] scsi host3: ahci
[ 5.358175] scsi host4: ahci
[ 5.358310] scsi host5: ahci
[ 5.358362] ata1: SATA max UDMA/133 abar m2048@0xd2134000 port 0xd2134100
irq 33
[ 5.358365] ata2: SATA max UDMA/133 abar m2048@0xd2134000 port 0xd2134180
irq 33
[ 5.358368] ata3: SATA max UDMA/133 abar m2048@0xd2134000 port 0xd2134200
irq 33
[ 5.358370] ata4: SATA max UDMA/133 abar m2048@0xd2134000 port 0xd2134280
irq 33
[ 5.358371] ata5: DUMMY
[ 5.358372] ata6: DUMMY
[ 5.376516] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC
clock
[ 5.442328] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
30:8d:99:25:ad:3f
[ 5.442330] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 5.442377] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 5.652431] usb 2-5: new full-speed USB device number 2 using xhci_hcd
[ 5.652435] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 5.672401] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 5.672405] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.680795] ata1.00: ATA-9: MTFDDAK512MAY-1AE1ZABHA, M506, max UDMA/133
[ 5.680799] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 5.698009] ata1.00: configured for UDMA/133
[ 5.708592] scsi 0:0:0:0: Direct-Access ATA MTFDDAK512MAY-1A M506
PQ: 0 ANSI: 5
[ 5.800438] tsc: Refined TSC clocksource calibration: 2793.516 MHz
[ 5.800453] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x2844537c16d, max_idle_ns: 440795322483 ns
[ 5.800505] clocksource: Switched to clocksource tsc
[ 5.802125] usb 2-5: New USB device found, idVendor=138a, idProduct=003f,
bcdDevice= 1.04
[ 5.802129] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.802132] usb 2-5: SerialNumber: 00a0f04d6780
[ 5.809061] usb 1-1: New USB device found, idVendor=8087, idProduct=8008,
bcdDevice= 0.04
[ 5.809065] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.809440] hub 1-1:1.0: USB hub found
[ 5.809614] hub 1-1:1.0: 6 ports detected
[ 5.829207] usb 3-1: New USB device found, idVendor=8087, idProduct=8000,
bcdDevice= 0.04
[ 5.829211] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.829867] hub 3-1:1.0: USB hub found
[ 5.830026] hub 3-1:1.0: 8 ports detected
[ 5.932428] usb 2-6: new high-speed USB device number 3 using xhci_hcd
[ 6.024605] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.028895] ata2.00: ATAPI: hp DVDRW SU208GB, HH00, max UDMA/100
[ 6.036140] ata2.00: configured for UDMA/100
[ 6.056507] scsi 1:0:0:0: CD-ROM hp DVDRW SU208GB HH00
PQ: 0 ANSI: 5
[ 6.089696] usb 2-6: New USB device found, idVendor=05ac, idProduct=1006,
bcdDevice=94.15
[ 6.089700] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.089703] usb 2-6: Product: Keyboard Hub
[ 6.089706] usb 2-6: Manufacturer: Apple, Inc.
[ 6.089708] usb 2-6: SerialNumber: 000000000000
[ 6.091378] hub 2-6:1.0: USB hub found
[ 6.091551] hub 2-6:1.0: 3 ports detected
[ 6.220454] usb 2-7: new high-speed USB device number 4 using xhci_hcd
[ 6.233651] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio2/input/input7
[ 6.408307] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.448417] usb 2-6.2: new low-speed USB device number 5 using xhci_hcd
[ 6.452200] usb 2-7: New USB device found, idVendor=05c8, idProduct=0374,
bcdDevice= 1.01
[ 6.452205] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.452207] usb 2-7: Product: HP HD Webcam
[ 6.452209] usb 2-7: Manufacturer: SunplusIT INC.
[ 6.559818] usb 2-6.2: New USB device found, idVendor=05ac, idProduct=0221,
bcdDevice= 0.69
[ 6.559822] usb 2-6.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.559825] usb 2-6.2: Product: Apple Keyboard
[ 6.559827] usb 2-6.2: Manufacturer: Apple, Inc
[ 6.575761] hid: raw HID events driver (C) Jiri Kosina
[ 6.583110] usbcore: registered new interface driver usbhid
[ 6.583111] usbhid: USB HID core driver
[ 6.585101] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.2/2-6.2:1.0/0003:05AC:0221.0001/input/input9
[ 6.644815] apple 0003:05AC:0221.0001: input,hidraw0: USB HID v1.11 Keyboard
[Apple, Inc Apple Keyboard] on usb-0000:00:14.0-6.2/input0
[ 6.645054] apple 0003:05AC:0221.0002: Fn key not found (Apple Wireless
Keyboard clone?), disabling Fn key handling
[ 6.645118] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.2/2-6.2:1.1/0003:05AC:0221.0002/input/input10
[ 6.680449] usb 2-12: new full-speed USB device number 6 using xhci_hcd
[ 6.704590] apple 0003:05AC:0221.0002: input,hidraw1: USB HID v1.11 Device
[Apple, Inc Apple Keyboard] on usb-0000:00:14.0-6.2/input1
[ 6.724357] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.735566] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512
GB/477 GiB)
[ 6.735568] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 6.735577] sd 0:0:0:0: [sda] Write Protect is off
[ 6.735578] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.735585] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.769844] sda: sda1 sda2 < sda5 >
[ 6.770537] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.782305] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 6.782307] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.809059] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.833789] usb 2-12: New USB device found, idVendor=8087, idProduct=07dc,
bcdDevice= 0.01
[ 6.833791] usb 2-12: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 6.912409] usb 2-6.3: new low-speed USB device number 7 using xhci_hcd
[ 7.017042] usb 2-6.3: New USB device found, idVendor=093a, idProduct=2510,
bcdDevice= 1.00
[ 7.017044] usb 2-6.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 7.017045] usb 2-6.3: Product: USB Optical Mouse
[ 7.017046] usb 2-6.3: Manufacturer: PixArt
[ 7.021570] psmouse serio3: synaptics: queried max coordinates: x [..5660],
y [..4730]
[ 7.022832] input: PixArt USB Optical Mouse as
/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.3/2-6.3:1.0/0003:093A:2510.0003/input/input11
[ 7.023023] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11
Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-6.3/input0
[ 7.055887] psmouse serio3: synaptics: queried min coordinates: x [1324..],
y [1248..]
[ 7.055905] psmouse serio3: synaptics: Your touchpad (PNP: SYN3023 SYN0100
SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi
are not used, you might want to try setting psmouse.synaptics_intertouch to 1
and report this to linux-in...@vger.kernel.org.
[ 7.113806] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id:
0x1e2b1, caps: 0xd40123/0x840300/0x26800/0x0, board id: 2706, fw id: 1486004
[ 7.151592] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio3/input/input8
[ 7.333473] device-mapper: uevent: version 1.0.3
[ 7.333570] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised:
dm-de...@redhat.com
[ 10.078891] e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: Rx/Tx
[ 10.078971] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.270750] PM: Image not found (code -22)
[ 12.355482] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
(null)
[ 12.455091] e1000e 0000:00:19.0 eth0: NIC Link is Down
[ 12.493119] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 12.621904] systemd[1]: Inserted module 'autofs4'
[ 12.635353] systemd[1]: systemd 246.4-1 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2
default-hierarchy=hybrid)
[ 12.652566] systemd[1]: Detected architecture x86-64.
[ 12.682831] systemd[1]: Set hostname to <zira>.
[ 12.732925] systemd[370]:
/lib/systemd/system-generators/systemd-fstab-generator failed with exit status
1.
[ 12.826055] systemd[1]: Queued start job for default target Graphical
Interface.
[ 12.826938] systemd[1]: Created slice system-getty.slice.
[ 12.827142] systemd[1]: Created slice system-modprobe.slice.
[ 12.827327] systemd[1]: Created slice system-postfix.slice.
[ 12.827549] systemd[1]: Created slice Cryptsetup Units Slice.
[ 12.827716] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 12.827876] systemd[1]: Created slice User and Session Slice.
[ 12.827939] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 12.827980] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 12.828137] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 12.828213] systemd[1]: Reached target Slices.
[ 12.828301] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 12.829015] systemd[1]: Listening on LVM2 poll daemon socket.
[ 12.832845] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 12.832964] systemd[1]: Listening on Syslog Socket.
[ 12.833055] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.833107] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 12.833244] systemd[1]: Listening on Journal Audit Socket.
[ 12.833323] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.833416] systemd[1]: Listening on Journal Socket.
[ 12.833514] systemd[1]: Listening on udev Control Socket.
[ 12.833587] systemd[1]: Listening on udev Kernel Socket.
[ 12.834299] systemd[1]: Mounting Huge Pages File System...
[ 12.835051] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.835904] systemd[1]: Mounting Kernel Debug File System...
[ 12.836885] systemd[1]: Mounting Kernel Trace File System...
[ 12.837231] systemd[1]: Finished Availability of block devices.
[ 12.838443] systemd[1]: Starting Wait for network to be configured by
ifupdown...
[ 12.839135] systemd[1]: Starting Set the console keyboard layout...
[ 12.839836] systemd[1]: Starting Create list of static device nodes for the
current kernel...
[ 12.840488] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc.
using dmeventd or progress polling...
[ 12.841194] systemd[1]: Starting Load Kernel Module drm...
[ 12.841752] systemd[1]: Condition check resulted in Set Up Additional Binary
Formats being skipped.
[ 12.841800] systemd[1]: Condition check resulted in File System Check on
Root Device being skipped.
[ 12.843264] systemd[1]: Starting Journal Service...
[ 12.844831] systemd[1]: Starting Load Kernel Modules...
[ 12.845749] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.846680] systemd[1]: Starting Coldplug All udev Devices...
[ 12.848607] systemd[1]: Mounted Huge Pages File System.
[ 12.848779] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.848927] systemd[1]: Mounted Kernel Debug File System.
[ 12.849056] systemd[1]: Mounted Kernel Trace File System.
[ 12.849557] systemd[1]: Finished Wait for network to be configured by
ifupdown.
[ 12.850120] systemd[1]: Finished Set the console keyboard layout.
[ 12.850625] systemd[1]: Finished Create list of static device nodes for the
current kernel.
[ 12.855841] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 12.857052] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 12.858453] systemd[1]: Starting Rebuild Hardware Database...
[ 12.858519] systemd[1]: Condition check resulted in Platform Persistent
Storage Archival being skipped.
[ 12.859547] systemd[1]: Starting Load/Save Random Seed...
[ 12.860386] systemd[1]: Starting Create System Users...
[ 12.864938] lp: driver loaded but no devices found
[ 12.869487] ppdev: user-space parallel port driver
[ 12.872466] systemd[1]: modprobe@drm.service: Succeeded.
[ 12.872855] systemd[1]: Finished Load Kernel Module drm.
[ 12.877875] parport_pc 00:04: reported by Plug and Play ACPI
[ 12.877946] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
[ 12.887588] systemd[1]: Finished Load/Save Random Seed.
[ 12.893482] systemd[1]: Finished Create System Users.
[ 12.894584] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 12.911697] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 12.913755] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc.
using dmeventd or progress polling.
[ 12.913872] systemd[1]: Reached target Local File Systems (Pre).
[ 12.916601] systemd[1]: Finished Coldplug All udev Devices.
[ 12.917376] systemd[1]: Starting Helper to synchronize boot up for
ifupdown...
[ 12.919373] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 12.964474] lp0: using parport0 (interrupt-driven).
[ 12.973795] systemd[1]: systemd-modules-load.service: Main process exited,
code=exited, status=1/FAILURE
[ 12.973870] systemd[1]: systemd-modules-load.service: Failed with result
'exit-code'.
[ 12.974138] systemd[1]: Failed to start Load Kernel Modules.
[ 12.975190] systemd[1]: Condition check resulted in FUSE Control File System
being skipped.
[ 12.975246] systemd[1]: Condition check resulted in Kernel Configuration
File System being skipped.
[ 12.975814] systemd[1]: Starting Apply Kernel Variables...
[ 12.984488] systemd[1]: Finished Apply Kernel Variables.
[ 13.107631] systemd[1]: Started Journal Service.
[ 13.333550] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13
[ 13.333575] ACPI: Sleep Button [SLPB]
[ 13.333673] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input14
[ 13.333691] ACPI: Lid Switch [LID]
[ 13.333767] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input15
[ 13.333805] ACPI: Power Button [PWRF]
[ 13.333806] ACPI: AC Adapter [AC] (on-line)
[ 13.335564] input: HP Wireless hotkeys as /devices/virtual/input/input16
[ 13.339396] hp_accel: hardware type HPZBook15 found
[ 13.350649] tpm_tis 00:07: 1.2 TPM (device-id 0x1A, rev-id 16)
[ 13.360440] EDAC ie31200: No ECC support
[ 13.360460] EDAC ie31200: No ECC support
[ 13.376878] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 13.398928] at24 0-0050: supply vcc not found, using dummy regulator
[ 13.399028] usbcore: registered new device driver apple-mfi-fastcharge
[ 13.399082] usb 2-6.2: USB disconnect, device number 5
[ 13.400897] at24 0-0050: 256 byte spd EEPROM, read-only
[ 13.400920] at24 0-0052: supply vcc not found, using dummy regulator
[ 13.401463] at24 0-0052: 256 byte spd EEPROM, read-only
[ 13.426127] mc: Linux media interface: v0.10
[ 13.426261] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 13.426401] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 13.468728] iTCO_vendor_support: vendor-support=0
[ 13.468976] input: PC Speaker as /devices/platform/pcspkr/input/input17
[ 13.474451] videodev: Linux video capture interface: v2.00
[ 13.476501] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.476545] iTCO_wdt: Found a Lynx Point TCO device (Version=2,
TCOBASE=0x1860)
[ 13.476642] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.477147] lis3lv02d: 8 bits 3DC sensor found
[ 13.499186] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0374)
[ 13.521257] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not
initialized!
[ 13.521259] uvcvideo 2-7:1.0: Entity type for entity Extension 3 was not
initialized!
[ 13.521261] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not
initialized!
[ 13.521262] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not
initialized!
[ 13.521338] input: HP HD Webcam: HP HD Webcam as
/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input18
[ 13.522075] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms
ovfl timer
[ 13.522076] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 13.522077] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 13.522077] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 13.522320] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 13.522326] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 13.547702] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 13.553216] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 13.553223] ext2 filesystem being mounted at /boot supports timestamps until
2038 (0x7fffffff)
[ 13.565671] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 13.566464] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 13.566723] cfg80211: Loaded X.509 cert 'b...@debian.org:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 13.566973] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 13.567225] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 13.568572] usbcore: registered new interface driver uvcvideo
[ 13.568573] USB Video Class driver (1.1.1)
[ 13.569536] usb 2-6.3: USB disconnect, device number 7
[ 13.569583] platform regulatory.0: firmware: direct-loading firmware
regulatory.db
[ 13.570169] platform regulatory.0: firmware: direct-loading firmware
regulatory.db.p7s
[ 13.633119] audit: type=1400 audit(1599564681.207:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=558 comm="apparmor_parser"
[ 13.633213] audit: type=1400 audit(1599564681.207:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=555
comm="apparmor_parser"
[ 13.633350] audit: type=1400 audit(1599564681.207:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oopslash"
pid=554 comm="apparmor_parser"
[ 13.634778] audit: type=1400 audit(1599564681.207:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=560
comm="apparmor_parser"
[ 13.634781] audit: type=1400 audit(1599564681.207:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=560 comm="apparmor_parser"
[ 13.635231] audit: type=1400 audit(1599564681.207:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed"
pid=559 comm="apparmor_parser"
[ 13.637345] audit: type=1400 audit(1599564681.211:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=562 comm="apparmor_parser"
[ 13.638028] audit: type=1400 audit(1599564681.211:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="tcpdump" pid=556
comm="apparmor_parser"
[ 13.638783] audit: type=1400 audit(1599564681.211:10): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=557
comm="apparmor_parser"
[ 13.638786] audit: type=1400 audit(1599564681.211:11): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium"
pid=557 comm="apparmor_parser"
[ 13.688094] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 13.704188] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 13.724362] Adding 20250620k swap on /dev/mapper/zira--vg-swap_1.
Priority:-2 extents:1 across:20250620k SSFS
[ 13.761790] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 13.761858] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[ 13.761899] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[ 13.761944] input: HDA NVidia HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[ 13.761982] input: HDA NVidia HDMI/DP,pcm=11 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[ 13.801804] Intel(R) Wireless WiFi driver for Linux
[ 13.804687] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3228:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 13.804689] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 13.804691] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x15/0x0/0x0/0x0/0x0)
[ 13.804692] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 13.804693] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 13.804694] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
[ 13.804695] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 13.806956] iwlwifi 0000:3d:00.0: firmware: direct-loading firmware
iwlwifi-7260-17.ucode
[ 13.807213] iwlwifi 0000:3d:00.0: loaded firmware version 17.3216344376.0
7260-17.ucode op_mode iwlmvm
[ 13.807230] iwlwifi 0000:3d:00.0: firmware: failed to load
iwl-debug-yoyo.bin (-2)
[ 13.808675] firmware_class: See https://wiki.debian.org/Firmware for
information about missing firmware
[ 13.868726] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[ 13.868774] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[ 13.868809] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[ 13.902086] Bluetooth: Core ver 2.22
[ 13.902094] NET: Registered protocol family 31
[ 13.902095] Bluetooth: HCI device and connection manager initialized
[ 13.902097] Bluetooth: HCI socket layer initialized
[ 13.902099] Bluetooth: L2CAP socket layer initialized
[ 13.902100] Bluetooth: SCO socket layer initialized
[ 13.902178] intel_rapl_common: Found RAPL domain package
[ 13.902179] intel_rapl_common: Found RAPL domain core
[ 13.902181] intel_rapl_common: Found RAPL domain dram
[ 13.907471] iwlwifi 0000:3d:00.0: Detected Intel(R) Dual Band Wireless AC
7260, REV=0x144
[ 13.917210] hub 2-6:1.0: USB hub found
[ 13.917288] hub 2-6:1.0: 3 ports detected
[ 13.918806] hub 2-6:1.0: USB hub found
[ 13.918861] hub 2-6:1.0: 3 ports detected
[ 13.928060] iwlwifi 0000:3d:00.0: base HW address: cc:3d:82:a9:e3:ea
[ 14.024673] usbcore: registered new interface driver btusb
[ 14.037549] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 14.038107] bluetooth hci0: firmware: direct-loading firmware
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 14.038109] Bluetooth: hci0: Intel Bluetooth firmware file:
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 14.060842] Process accounting resumed
[ 14.146765] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 14.149506] iwlwifi 0000:3d:00.0 wlp61s0: renamed from wlan0
[ 14.155072] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.155073] Bluetooth: BNEP filters: protocol multicast
[ 14.155077] Bluetooth: BNEP socket layer initialized
[ 14.169513] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 14.185522] Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated
[ 14.204342] usb 2-6.2: new low-speed USB device number 8 using xhci_hcd
[ 14.239827] NET: Registered protocol family 38
[ 14.310903] usb 2-6.2: New USB device found, idVendor=05ac, idProduct=0221,
bcdDevice= 0.69
[ 14.310905] usb 2-6.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 14.310905] usb 2-6.2: Product: Apple Keyboard
[ 14.310906] usb 2-6.2: Manufacturer: Apple, Inc
[ 14.319504] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.2/2-6.2:1.0/0003:05AC:0221.0004/input/input29
[ 14.376480] apple 0003:05AC:0221.0004: input,hidraw0: USB HID v1.11 Keyboard
[Apple, Inc Apple Keyboard] on usb-0000:00:14.0-6.2/input0
[ 14.378684] apple 0003:05AC:0221.0005: Fn key not found (Apple Wireless
Keyboard clone?), disabling Fn key handling
[ 14.378706] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.2/2-6.2:1.1/0003:05AC:0221.0005/input/input30
[ 14.436441] apple 0003:05AC:0221.0005: input,hidraw1: USB HID v1.11 Device
[Apple, Inc Apple Keyboard] on usb-0000:00:14.0-6.2/input1
[ 14.516340] usb 2-6.3: new low-speed USB device number 9 using xhci_hcd
[ 14.620760] usb 2-6.3: New USB device found, idVendor=093a, idProduct=2510,
bcdDevice= 1.00
[ 14.620763] usb 2-6.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 14.620764] usb 2-6.3: Product: USB Optical Mouse
[ 14.620766] usb 2-6.3: Manufacturer: PixArt
[ 14.625511] input: PixArt USB Optical Mouse as
/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.3/2-6.3:1.0/0003:093A:2510.0006/input/input31
[ 14.628584] hid-generic 0003:093A:2510.0006: input,hidraw0: USB HID v1.11
Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-6.3/input0
[ 14.637881] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.2/2-6.2:1.0/0003:05AC:0221.0007/input/input32
[ 14.696666] apple 0003:05AC:0221.0007: input,hidraw1: USB HID v1.11 Keyboard
[Apple, Inc Apple Keyboard] on usb-0000:00:14.0-6.2/input0
[ 14.698994] apple 0003:05AC:0221.0008: Fn key not found (Apple Wireless
Keyboard clone?), disabling Fn key handling
[ 14.699060] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.2/2-6.2:1.1/0003:05AC:0221.0008/input/input33
[ 14.756520] apple 0003:05AC:0221.0008: input,hidraw2: USB HID v1.11 Device
[Apple, Inc Apple Keyboard] on usb-0000:00:14.0-6.2/input1
[ 14.968798] ACPI: \: failed to evaluate _DSM (0x1001)
[ 15.012410] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input34
[ 17.442783] e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: Rx/Tx
[ 17.442824] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.557712] process '/sbin/netplugd' started with executable stack
[ 30.906469] Bluetooth: RFCOMM TTY layer initialized
[ 30.906475] Bluetooth: RFCOMM socket layer initialized
[ 30.906480] Bluetooth: RFCOMM ver 1.11
