Package: hddtemp Version: 0.3-beta15-53 Severity: normal Tags: a11y hi .
i 'm trying to make hddtemp working with my new nvme ssd (crucial P1 1To) my machine : ~$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux bullseye/sid Release: testing Codename: bullseye ~$ uname -a Linux P1-NVME 5.6.0-1-amd64 #1 SMP Debian 5.6.7-1 (2020-04-29) x86_64 GNU/Linux smartctl datas : ~$ sudo smartctl -a /dev/nvme0n1 [sudo] Mot de passe de alain : smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.6.0-1-amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: CT1000P1SSD8 Serial Number: 2006E289B7B7 Firmware Version: P3CR013 PCI Vendor/Subsystem ID: 0xc0a9 IEEE OUI Identifier: 0x00a075 Controller ID: 1 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1 000 204 886 016 [1,00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 00a075 20e289b7b7 Local Time is: Fri May 29 18:05:18 2020 CEST Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0016): Format Frmw_DL Self_Test Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Maximum Data Transfer Size: 32 Pages Warning Comp. Temp. Threshold: 70 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 5 5 1 + 4.60W - - 1 1 1 1 30 30 2 + 3.80W - - 2 2 2 2 30 30 3 - 0.0500W - - 3 3 3 3 1000 1000 4 - 0.0040W - - 4 4 4 4 6000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 41 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 145 506 [74,4 GB] Data Units Written: 338 928 [173 GB] Host Read Commands: 1 345 866 Host Write Commands: 5 266 822 Controller Busy Time: 54 Power Cycles: 12 Power On Hours: 48 Unsafe Shutdowns: 3 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 42 Celsius Temperature Sensor 2: 41 Celsius Temperature Sensor 5: 49 Celsius Error Information (NVMe Log 0x01, max 256 entries) No Errors Logged the hddtemp reaction : ~$ sudo hddtemp /dev/nvme0n1 ERREUR: /dev/nvme0n1: impossible de déterminer le type de bus (ou ce type de bus est inconnu) traduction : ERROR: /dev/nvme0n1: bus type could not be determined (or bus type is unknown) -- System Information: Debian Release: bullseye/sid APT prefers testing APT policy: (500, 'testing'), (100, 'unstable'), (100, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.6.0-1-amd64 (SMP w/16 CPU cores) Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages hddtemp depends on: ii debconf [debconf-2.0] 1.5.74 ii libc6 2.30-8 ii lsb-base 11.1.0 hddtemp recommends no packages. hddtemp suggests no packages. -- debconf information: * hddtemp/port: 7634 * hddtemp/syslog: 1 * hddtemp/daemon: true * hddtemp/interface: 127.0.0.1 * hddtemp/SUID_bit: true
