Package: network-manager
Version: 1.14.6-2+deb10u1
Followup-For: Bug #624438
Dear Maintainer,
* What led up to the situation
Searching for an USB WiFi for Stretch, I found that the Panda PAU05 (PAU06)
worked very nicely, provided that I backported
the device driver from Buster (testing). Since Buster has been promoted to
Stable, the devices no longer work.
* What exactly did you do (or not do) that was effective (or
ineffective)
root@kilroy:/# uname -a
Linux kilroy 4.19.0-8-amd64 #1 SMP Debian 4.19.98-1 (2020-01-26) x86_64
GNU/Linux
root@kilroy:/# lsusb
Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 05e3:0620 Genesys Logic, Inc.
Bus 003 Device 003: ID 05e3:0620 Genesys Logic, Inc.
Bus 003 Device 002: ID 05e3:0620 Genesys Logic, Inc.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 007: ID 148f:5372 Ralink Technology, Corp. RT5372 Wireless
Adapter
Bus 002 Device 005: ID 2341:003d Arduino SA
Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 008: ID 05a3:9230 ARC International Camera
Bus 002 Device 006: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 002 Device 004: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@kilroy:/# /sbin/iwconfig
enp2s0 no wireless extensions.
enp3s0 no wireless extensions.
lo no wireless extensions.
wlx9cefd5fdec63 IEEE 802.11 ESSID:"C&WM"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry short long limit:2 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
root@kilroy:/# lsmod |grep rt2800usb
rt2800usb 32768 0
rt2x00usb 24576 1 rt2800usb
rt2800lib 118784 1 rt2800usb
rt2x00lib 57344 3 rt2800usb,rt2x00usb,rt2800lib
usbcore
root@kilroy:~$ nmcli device wifi list
IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY
root@kilroy:~$ nmcli connection show
NAME UUID TYPE
DEVICE
New 802-11-wireless connection 6a704f1b-e178-4602-beed-c77d34b298dd wifi
--
Wired connection 1 bd80662b-4772-47f8-8303-d4e23d188df6 ethernet
--
root@kilroy:/# /sbin/iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Retry short long limit: 2
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP-128 (00-0f-ac:4)
* CCMP-256 (00-0f-ac:10)
* GCMP-128 (00-0f-ac:8)
* GCMP-256 (00-0f-ac:9)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* mesh point
Band 1:
Capabilities: 0x2fe
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 2-streams
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 2 usec (0x04)
HT TX/RX MCS rate indexes supported: 0-15, 32
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm) (no IR)
* 2472 MHz [13] (20.0 dBm) (no IR)
* 2484 MHz [14] (20.0 dBm) (no IR)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
* set_qos_map
* set_multicast_to_unicast
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0
0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90
0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0
0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90
0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90
0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ AP, mesh point } <= 8,
total <= 8, #channels <= 1
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Device supports configuring vdev MAC-addr on create.
Supported extended features:
* [ RRM ]: RRM
* [ FILS_STA ]: STA FILS (Fast Initial Link Setup)
* [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
* [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211?
-- System Information:
Debian Release: 10.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-8-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=
(charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages network-manager depends on:
ii adduser 3.118
ii dbus 1.12.16-1
ii init-system-helpers 1.56+nmu1
ii libaudit1 1:2.8.4-3
ii libbluetooth3 5.50-1.2~deb10u1
ii libc6 2.28-10
ii libcurl3-gnutls 7.64.0-4+deb10u1
ii libglib2.0-0 2.58.3-2+deb10u2
ii libgnutls30 3.6.7-4+deb10u2
ii libjansson4 2.12-1
ii libmm-glib0 1.10.0-1
ii libndp0 1.6-1+b1
ii libnewt0.52 0.52.20-8
ii libnm0 1.14.6-2+deb10u1
ii libpam-systemd 241-7~deb10u3
ii libpolkit-agent-1-0 0.105-25
ii libpolkit-gobject-1-0 0.105-25
ii libpsl5 0.20.2-2
ii libreadline7 7.0-5
ii libselinux1 2.8-1+b1
ii libsystemd0 241-7~deb10u3
ii libteamdctl0 1.28-1
ii libudev1 241-7~deb10u3
ii libuuid1 2.33.1-0.1
ii lsb-base 10.2019051400
ii policykit-1 0.105-25
ii udev 241-7~deb10u3
ii wpasupplicant 2:2.7+git20190128+0c1e29f-6+deb10u1
Versions of packages network-manager recommends:
ii crda 3.18-1
ii dnsmasq-base [dnsmasq-base] 2.80-1
ii iptables 1.8.2-4
ii isc-dhcp-client 4.4.1-2
ii modemmanager 1.10.0-1
ii ppp 2.4.7-2+4.1+deb10u1
Versions of packages network-manager suggests:
pn libteam-utils <none>
-- no debconf information
