Package: ipxe-qemu Version: 1.0.0+git-20190125.36a4c85-1 Followup-For: Bug #929983 Control: tags 929983 - moreinfo
I can confirm the issue is still there with the VM defined in libvirt. The command from Shengjing Zhu gives the following output: -----BEGIN cutting here may damage your screen surface----- SeaBIOS (version 1.12.0-1) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+7FF90020+7FED0020 C980 Booting from Hard Disk... Boot failed: could not read the boot disk Booting from Floppy... Boot failed: could not read the boot disk Booting from DVD/CD... Boot failed: Could not read from CDROM (code 0003) Booting from ROM... iPXE (PCI 00:03.0) starting execution...ok iPXE initialising devices...ok iPXE 1.0.0+git-20190125.36a4c85-1 -- Open Source Network Boot Firmware -- http:/ /ipxe.org Features: DNS HTTP iSCSI NFS TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT net0: 52:54:00:12:34:56 using virtio-net on 0000:00:03.0 (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] Configuring (net0 52:54:00:12:34:56)...... ok net0: 10.0.2.15/255.255.255.0 gw 10.0.2.2 net0: fec0::5054:ff:fe12:3456/64 gw fe80::2 net0: fe80::5054:ff:fe12:3456/64 Nothing to boot: No such file or directory (http://ipxe.org/2d03e13b) No more network devices No bootable device. -----END cutting here may damage your screen surface----- So perhaps this is a libvirt thing? libvirt runs the domain with: 26266 ? Sl 0:02 qemu-system-x86_64 -enable-kvm -name guest=foo,debug-threads=on -S -object secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-15-foo/master-key.aes -machine pc-1.1,accel=kvm,usb=off,dump-guest-core=off -cpu Nehalem-IBRS,vme=on,ss=on,x2apic=on,tsc-deadline=on,hypervisor=on,arat=on,tsc_adjust=on,umip=on,ssbd=on,rdtscp=on -m 1024 -realtime mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid 8b2c4678-c507-4652-afce-de7dda4cb3e0 -no-user-config -nodefaults -chardev socket,id=charmonitor,fd=37,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -boot menu=on,strict=on -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/dev/vg-evolvis-wirt/foo,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,write-cache=on -netdev tap,fd=39,id=hostnet0,vhost=on,vhostfd=40 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:09:55:44,bus=pci.0,addr=0x3,bootindex=1 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -device usb-tablet,id=input0,bus=usb.0,port=1 -vnc 127.0.0.1:12 -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny -msg timestamp=on I can confirm it to fail when run from the command line with: qemu-system-x86_64 -enable-kvm -name guest=foo,debug-threads=on -machine pc-1.1,accel=kvm,usb=off,dump-guest-core=off -cpu Nehalem-IBRS,vme=on,ss=on,x2apic=on,tsc-deadline=on,hypervisor=on,arat=on,tsc_adjust=on,umip=on,ssbd=on,rdtscp=on -m 1024 -realtime mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid 8b2c4678-c507-4652-afce-de7dda4cb3e0 -no-user-config -nodefaults -rtc base=utc -no-shutdown -boot menu=on,strict=on -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/dev/vg-evolvis-wirt/foo,format=raw,if=none,id=drive-virtio-disk0,cache=none,aio=native -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,write-cache=on -netdev tap,fd=39,id=hostnet0,vhost=on,vhostfd=40 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:09:55:44,bus=pci.0,addr=0x3,bootindex=1 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -device usb-tablet,id=input0,bus=usb.0,port=1 -vnc 127.0.0.1:12 -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny -msg timestamp=on Trying to minify… success! Adding “-machine pc-1.1,accel=kvm,usb=off,dump-guest-core=off” to the command given by Shengjing Zhu makes it fail: -----BEGIN cutting here may damage your screen surface----- SeaBIOS (version 1.12.0-1) Booting from Hard Disk... Boot failed: could not read the boot disk Booting from Floppy... Boot failed: could not read the boot disk Booting from DVD/CD... Boot failed: Could not read from CDROM (code 0003) No bootable device. -----END cutting here may damage your screen surface----- So perhaps this is a qemu thing? Or ipxe only works with USB? Or…? -- System Information: Debian Release: 10.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.19.0-8-amd64 (SMP w/8 CPU cores) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE=C (charmap=UTF-8) Shell: /bin/sh linked to /bin/lksh Init: sysvinit (via /sbin/init) -- no debconf information
