Hi Ben,
Ben Hutchings schrieb/wrote:
> Control: reassign -1 src:linux 5.4.19-1
> Control: severity -1 important
> Control: tag -1 moreinfo
>
> On Fri, 2020-02-21 at 15:39 +0100, TS wrote:
>> Package: linux-source-5.4
>> Version: linux 5.4.0-4
>> Severity: serious
>> Justification: 1
>>
>> Hi
>>
>> did upgrade to sid. linux 5.4.0-4 does not boot on this pc.
>> Booting 4.19.0-8-amd64 instead brings up running system.
>>
>> The boot prozess breaks after grub. Blank screen, nothing happens.
>> With 4.19.0-8-amd64 system boots up as expected.
>
> Are we supposed to guess what "this pc" is?
Guess what. Surely not. i ran
% reportbug linux-image-5.4.0-4-amd64-unsigned
and that is was it collected. I wondered myself about the less of information.
Thought some comprehensive person would come to ask the relevant information. So
here we are. ;)
reportbug scripts seem broken on this machine:
as much of information attached, as i could think of.
<------------- % reportbug kernel -------------------
Subject: linux-image-4.19.0-8-amd64: does not boot
1 Package: linux-image-4.19.0-8-amd64
2 Severity: normal
3
4
5
6 -- System Information:
7 Debian Release: bullseye/sid
8 APT prefers unstable
9 APT policy: (500, 'unstable')
10 Architecture: amd64 (x86_64)
11
12 Kernel: Linux 4.19.0-8-amd64 (SMP w/2 CPU cores)
13 Kernel taint flags: TAINT_UNSIGNED_MODULE
14 Locale: LANG=C, LC_CTYPE=C (charmap=UTF-8) (ignored: LC_ALL set to C.UTF-8),
LANGUAGE=C (charmap=UTF-8) (ignored: LC_ALL set to C
15 Shell: /bin/sh linked to /bin/dash
16 Init: systemd (via /run/systemd/system)
17 LSM: AppArmor: enabled
<------------------------------------------------------
% asKERNELS-INSTALLED
i linux-base | 4.6 |
i linux-compiler-gcc-9-x86 | 5.4.19-1 |
i linux-image-4.19.0-8-amd64-unsigned | 4.19.98-1 |
i linux-kbuild-5.4 | 5.4.19-1 |
i linux-libc-dev | 5.4.19-1 |
# lspci -vv >| /home/luke/temp/lspci
lspci: Unable to load libkmod resources: error -12
hmm libkmod2 is installed:
● apt install
Reading package lists... Done
Building dependency tree
Reading state information... Done
libkmod2 is already the newest version (27-1).
libkmod2 set to manually installed.
Thanks Ben.
regards
TS
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping : 6
microcode : 0x60f
cpu MHz : 2041.007
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64
monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm pti
tpr_shadow vnmi flexpriority dtherm
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds
swapgs itlb_multihit
bogomips : 5984.41
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping : 6
microcode : 0x60f
cpu MHz : 2005.820
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64
monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm pti
tpr_shadow vnmi flexpriority dtherm
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds
swapgs itlb_multihit
bogomips : 5984.41
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.5 present.
81 structures occupying 2789 bytes.
Table at 0xDF1DB000.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd.
Version: 6.00 R1.09.2584.A1
Release Date: 02/18/2008
Address: 0xE2C20
Runtime Size: 119776 bytes
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 1.9
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: FUJITSU SIEMENS
Product Name: ESPRIMO P5925
Version:
Serial Number: YK8D073995
UUID: a1d4a314-ef9b-11dc-bf99-0019993280b1
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: FUJITSU SIEMENS
Product Name: D2584-A1
Version: S26361-D2584-A1
Serial Number: B08B4426
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: FUJITSU SIEMENS
Type: Mini Tower
Lock: Not Present
Version:
Serial Number: YK8D073995
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Core 2
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM)2 Duo CPU E8400
Voltage: 3.3 V
External Clock: Unknown
Max Speed: 3000 MHz
Current Speed: 3000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 64 kB
Maximum Size: 64 kB
Supported SRAM Types:
Burst
Synchronous
Installed SRAM Type: Burst Synchronous
Speed: Unknown
Error Correction Type: Parity
System Type: Data
Associativity: Other
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: Other
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3 Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 6144 kB
Maximum Size: 16384 kB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: Other
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: None
External Reference Designator: Serial-1
External Connector Type: DB-9 male
Port Type: Serial Port 16550 Compatible
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Intel 82566DM
Internal Connector Type: None
External Reference Designator: LAN
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: None
External Reference Designator: Front: USB-1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: None
External Reference Designator: Front: USB-2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: None
External Reference Designator: Front: USB-7
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: None
External Reference Designator: Front: USB-8
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: None
External Reference Designator: Front: USB-9
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: None
External Reference Designator: Front: USB-10
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: None
External Reference Designator: Front: USB-11
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: None
External Reference Designator: Front: USB-12
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Intel Q965
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Realtek ALC262
Internal Connector Type: None
External Reference Designator: Rear: Line-In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Realtek ALC262
Internal Connector Type: None
External Reference Designator: Rear: Line-Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Realtek ALC262
Internal Connector Type: None
External Reference Designator: Front: Line-Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Realtek ALC262
Internal Connector Type: None
External Reference Designator: Front: Mic-In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: SATA-0
External Connector Type: None
Port Type: SATA
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: SATA-1
External Connector Type: None
Port Type: SATA
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: SATA-4
External Connector Type: None
Port Type: SATA
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ICH9
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: SATA-5
External Connector Type: None
Port Type: SATA
Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SMsC
Internal Connector Type: On Board Floppy
External Reference Designator: Floppy
External Connector Type: None
Port Type: None
Handle 0x001F, DMI type 9, 13 bytes
System Slot Information
Designation: PCIe x1
Type: x1 PCI Express
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
Designation: PCIe x16
Type: x16 PCI Express
Current Usage: Available
Length: Long
ID: 2
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0021, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0022, DMI type 9, 13 bytes
System Slot Information
Designation: PCI
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0023, DMI type 10, 14 bytes
On Board Device 1 Information
Type: Other
Status: Disabled
Description: SMsC SuperI/O
On Board Device 2 Information
Type: Sound
Status: Disabled
Description: Realtek ALC262
On Board Device 3 Information
Type: Video
Status: Disabled
Description: Intel Q965
On Board Device 4 Information
Type: Other
Status: Disabled
Description: Hades
On Board Device 5 Information
Type: Ethernet
Status: Disabled
Description: Intel 82566DM
Handle 0x0024, DMI type 11, 5 bytes
OEM Strings
String 1: FUJITSU SIEMENS
String 2: FUJITSU SIEMENS SYSTEM
Handle 0x0025, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x0026, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0027, DMI type 15, 29 bytes
System Event Log
Area Length: 512 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF2A26F
Status: Valid, Full
Change Token: 0x0000001D
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x0028, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0029, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: Slot-1
Bank Locator: Channel A
Type: DDR2
Type Detail: Synchronous
Speed: 800 MT/s
Manufacturer: 48spaces
Serial Number: 01234567
Asset Tag: 01234567
Part Number: 012345678901234567890123456789012345
Handle 0x002A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: Slot-3
Bank Locator: Channel A
Type: DDR2
Type Detail: Synchronous
Speed: 800 MT/s
Manufacturer: 48spaces
Serial Number: 11234567
Asset Tag: 11234567
Part Number: 112345678901234567890123456789012345
Handle 0x002B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: Slot-2
Bank Locator: Channel B
Type: DDR2
Type Detail: Synchronous
Speed: 800 MT/s
Manufacturer: 48spaces
Serial Number: 21234567
Asset Tag: 21234567
Part Number: 212345678901234567890123456789012345
Handle 0x002C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: Slot-4
Bank Locator: Channel B
Type: DDR2
Type Detail: Synchronous
Speed: 800 MT/s
Manufacturer: 48spaces
Serial Number: 31234567
Asset Tag: 31234567
Part Number: 312345678901234567890123456789012345
Handle 0x002D, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x001FFFFFFFF
Range Size: 8 GB
Physical Array Handle: 0x0028
Partition Width: 1
Handle 0x002E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0029
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x002F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FFFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x002A
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0030, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00100000000
Ending Address: 0x0017FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x002B
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0031, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00180000000
Ending Address: 0x001FFFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x002C
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0032, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0033, DMI type 39, 22 bytes
System Power Supply
Location: Not Specified
Name: S26113-E524-V50
Manufacturer: Not Specified
Serial Number: 080256
Asset Tag: Not Specified
Model Part Number: Not Specified
Revision: GS00 REV0B
Max Power Capacity: 300 W
Status: Present, Unknown
Type: Switching
Input Voltage Range Switching: Unknown
Plugged: Yes
Hot Replaceable: No
Handle 0x0034, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 34 00 24 41 4D 54 01 01 00 00 01 A5 0F 04
00 00 00 00
Handle 0x0035, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 35 00 3E 00 00 00 00 00 B0 29 0A 00 00 00
F8 00 14 29 00 00 00 00 0F 00 00 00 00 00 03 00
51 04 02 00 01 00 01 21 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 76 50 72 6F 00 00 00 00
Handle 0x0036, DMI type 176, 16 bytes
OEM-specific Type
Header and Data:
B0 10 36 00 10 00 84 25 00 09 FF FF 02 FF FF FF
Handle 0x0037, DMI type 177, 12 bytes
OEM-specific Type
Header and Data:
B1 0C 37 00 11 04 09 01 00 00 00 00
Handle 0x0038, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 38 00 00 10 00 00
Handle 0x0039, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 39 00 01 10 00 00
Handle 0x003A, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 3A 00 02 09 00 00
Handle 0x003B, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 3B 00 06 02 1B E6
Handle 0x003C, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 3C 00 07 02 1B E6
Handle 0x003D, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 3D 00 0A 02 1B E6
Handle 0x003E, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 3E 00 0B 02 1B E6
Handle 0x003F, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 3F 00 0F 10 00 00
Handle 0x0040, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 40 00 10 02 1B E6
Handle 0x0041, DMI type 185, 46 bytes
OEM-specific Type
Header and Data:
B9 2E 41 00 13 07 01 3C 00 00 00 02 A1 00 00 00
03 2C 00 00 00 05 F7 09 00 FB 06 F7 09 00 FB 07
0A 00 00 00 0A 12 67 3C 02 00 00 00 00 00
Handle 0x0042, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 42 00 15 10 00 00
Handle 0x0043, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 43 00 16 02 1B E6
Handle 0x0044, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 44 00 18 02 1B E6
Handle 0x0045, DMI type 185, 86 bytes
OEM-specific Type
Header and Data:
B9 56 45 00 19 07 0C F7 09 00 FB 0D BB 00 EE 00
0E A6 00 D5 00 0F 90 00 D6 00 10 0A 05 35 37 11
0A 05 37 39 12 0A 05 44 46 20 19 A6 32 02 21 15
A6 32 02 22 15 A6 32 02 23 15 A6 32 02 1F 28 05
00 00 11 0A 05 37 39 29 F7 09 00 FB 2A 0A 05 3B
3E 00 00 00 00 00
Handle 0x0046, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 46 00 1E 02 1B E6
Handle 0x0047, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 47 00 26 02 1B E6
Handle 0x0048, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 48 00 28 02 1B E6
Handle 0x0049, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 49 00 29 02 1B E6
Handle 0x004A, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 4A 00 2A 02 1B E6
Handle 0x004B, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 4B 00 2B 02 1B E6
Handle 0x004C, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 4C 00 31 02 1B E6
Handle 0x004D, DMI type 185, 8 bytes
OEM-specific Type
Header and Data:
B9 08 4D 00 FF 00 00 00
Handle 0x004E, DMI type 186, 15 bytes
OEM-specific Type
Header and Data:
BA 0F 4E 00 0D AF 28 22 01 01 01 01 1F 11 2E
Handle 0x004F, DMI type 188, 8 bytes
OEM-specific Type
Header and Data:
BC 08 4F 00 38 38 31 24
Handle 0x0050, DMI type 127, 4 bytes
End Of Table
Module Size Used by
ipt_MASQUERADE 16384 1
nf_conntrack_netlink 49152 0
nfnetlink 16384 2 nf_conntrack_netlink
xfrm_user 40960 1
xfrm_algo 16384 1 xfrm_user
xt_addrtype 16384 2
br_netfilter 24576 0
bridge 188416 1 br_netfilter
stp 16384 1 bridge
llc 16384 2 bridge,stp
overlay 131072 0
xt_CT 16384 1
xt_tcpudp 16384 53
xt_helper 16384 1
nf_conntrack_ftp 20480 1
nf_log_ipv4 16384 42
nf_log_common 16384 1 nf_log_ipv4
ip6table_raw 16384 0
ip6table_mangle 16384 0
ip6table_nat 16384 0
nf_nat_ipv6 16384 1 ip6table_nat
iptable_nat 16384 1
nf_nat_ipv4 16384 2 ipt_MASQUERADE,iptable_nat
nf_nat 36864 2 nf_nat_ipv6,nf_nat_ipv4
xt_TCPMSS 16384 6
xt_LOG 16384 42
ipt_REJECT 16384 3
nf_reject_ipv4 16384 1 ipt_REJECT
iptable_raw 16384 1
iptable_mangle 16384 0
xt_multiport 16384 0
xt_state 16384 0
xt_limit 16384 46
xt_conntrack 16384 17
nf_conntrack 172032 10
xt_conntrack,nf_nat,xt_state,nf_nat_ipv6,ipt_MASQUERADE,nf_nat_ipv4,xt_helper,nf_conntrack_netlink,nf_conntrack_ftp,xt_CT
nf_defrag_ipv6 20480 1 nf_conntrack
nf_defrag_ipv4 16384 1 nf_conntrack
libcrc32c 16384 2 nf_conntrack,nf_nat
ip6table_filter 16384 1
ip6_tables 32768 4
ip6table_filter,ip6table_raw,ip6table_nat,ip6table_mangle
iptable_filter 16384 1
binfmt_misc 20480 1
snd_hda_codec_realtek 122880 1
snd_hda_codec_generic 86016 1 snd_hda_codec_realtek
coretemp 16384 0
iTCO_wdt 16384 0
kvm_intel 233472 0
snd_hda_intel 45056 0
fschmd 28672 0
snd_hda_codec 151552 3
snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_realtek
joydev 24576 0
iTCO_vendor_support 16384 1 iTCO_wdt
mei_wdt 16384 0
kvm 749568 1 kvm_intel
ppdev 20480 0
snd_hda_core 94208 4
snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
sr_mod 28672 0
irqbypass 16384 1 kvm
snd_hwdep 16384 1 snd_hda_codec
lpc_ich 28672 0
cdrom 65536 1 sr_mod
serio_raw 16384 0
mfd_core 16384 1 lpc_ich
i2c_i801 28672 0
snd_pcm 114688 3 snd_hda_intel,snd_hda_codec,snd_hda_core
pcspkr 16384 0
sg 36864 0
parport_pc 32768 0
snd_timer 36864 1 snd_pcm
snd 94208 7
snd_hda_codec_generic,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
parport 57344 2 parport_pc,ppdev
mei_me 45056 1
mei 118784 3 mei_wdt,mei_me
ehci_pci 16384 0
e1000e 282624 0
ata_generic 16384 0
soundcore 16384 1 snd
button 16384 0
pcc_cpufreq 16384 0
acpi_cpufreq 24576 0
ip_tables 28672 21
iptable_filter,iptable_raw,iptable_nat,iptable_mangle
x_tables 45056 20
ip6table_filter,xt_conntrack,ip6table_raw,iptable_filter,xt_LOG,xt_multiport,xt_state,xt_tcpudp,ipt_MASQUERADE,xt_addrtype,xt_helper,ip6_tables,ipt_REJECT,xt_CT,iptable_raw,ip_tables,xt_limit,ip6table_mangle,iptable_mangle,xt_TCPMSS
autofs4 49152 2
ext4 741376 3
crc16 16384 1 ext4
mbcache 16384 1 ext4
jbd2 122880 1 ext4
crc32c_generic 16384 4
fscrypto 32768 1 ext4
ecb 16384 0
crypto_simd 16384 0
cryptd 28672 1 crypto_simd
glue_helper 16384 0
aes_x86_64 20480 1
evdev 28672 14
hid_generic 16384 0
sd_mod 61440 5
usbhid 57344 0
hid 135168 2 usbhid,hid_generic
ahci 40960 4
libahci 40960 1 ahci
i915 1736704 1
psmouse 172032 0
libata 270336 3 libahci,ahci,ata_generic
video 45056 1 i915
i2c_algo_bit 16384 1 i915
scsi_mod 249856 4 sd_mod,libata,sg,sr_mod
uhci_hcd 49152 0
ehci_hcd 94208 1 ehci_pci
drm_kms_helper 208896 1 i915
usbcore 294912 4 ehci_pci,usbhid,ehci_hcd,uhci_hcd
usb_common 16384 1 usbcore
drm 495616 3 drm_kms_helper,i915
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
Subsystem: Fujitsu Technology Solutions 82Q35 Express DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0b <?>
00:01.0 PCI bridge: Intel Corporation 82Q35 Express PCI Express Root Port (rev
02) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Fujitsu Technology Solutions 82Q35
Express PCI Express Root Port
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <1us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x0 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending+ InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated
Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions 82Q35 Express Integrated
Graphics Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1c70 [size=8]
Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI
Controller (rev 02)
Subsystem: Fujitsu Technology Solutions 82Q35 Express MEI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f03a6800 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee02004 Data: 4027
Kernel driver in use: mei_me
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev
02) (prog-if 85 [PCI native mode-only controller, supports bus mastering])
Subsystem: Fujitsu Technology Solutions 82Q35 Express PT IDER Controller
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at 1c88 [disabled] [size=8]
Region 1: I/O ports at 1c7c [disabled] [size=4]
Region 2: I/O ports at 1c80 [disabled] [size=8]
Region 3: I/O ports at 1c78 [disabled] [size=4]
Region 4: I/O ports at 1c40 [disabled] [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT Controller
(rev 02) (prog-if 02 [16550])
Subsystem: Fujitsu Technology Solutions 82Q35 Express Serial KT
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1c90 [size=8]
Region 1: Memory at f01a4000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
Connection (rev 02)
Subsystem: Fujitsu Technology Solutions 82566DM-2 Gigabit Network
Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f0180000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f01a5000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee01004 Data: 4025
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) USB UHCI
Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1840 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) USB UHCI
Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) USB UHCI
Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) USB2 EHCI
Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f03a7000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 02)
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) HD Audio
Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f01a0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee01004 Data: 4027
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE- FLReset+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+
TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: f0400000-f05fffff [size=2M]
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr+ UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x0 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna-
CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Fujitsu Technology Solutions 82801I (ICH9
Family) PCI Express Port 1
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 22
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: f0800000-f09fffff [size=2M]
Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr+ UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+
TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x0 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna-
CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Fujitsu Technology Solutions 82801I (ICH9
Family) PCI Express Port 5
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=05 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) USB UHCI
Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 18a0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) USB UHCI
Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 18c0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) USB UHCI
Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 18e0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) USB2 EHCI
Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f03a7400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Fujitsu Technology Solutions 82801 PCI
Bridge
00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller
(rev 02)
Subsystem: Fujitsu Technology Solutions 82801IO (ICH9DO) LPC Interface
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port
SATA Controller [AHCI mode] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Fujitsu Technology Solutions 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA Controller [AHCI mode]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 24
Region 0: I/O ports at 1ca8 [size=8]
Region 1: I/O ports at 1c9c [size=4]
Region 2: I/O ports at 1ca0 [size=8]
Region 3: I/O ports at 1c98 [size=4]
Region 4: I/O ports at 1c00 [size=32]
Region 5: Memory at f03a6000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee02004 Data: 4029
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
Subsystem: Fujitsu Technology Solutions 82801I (ICH9 Family) SMBus
Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f03a7800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c20 [size=32]
Kernel driver in use: i801_smbus
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.19
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.19
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.19
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.19
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.19
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.19
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 002 Device 003: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc018 Optical Wheel Mouse
bcdDevice 43.01
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0022
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0005 1x 5 bytes
bInterval 10
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.19
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 001 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc31c Keyboard K120
bcdDevice 64.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x003b
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 3
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 90mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 2
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 2
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 159
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 255
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 4.19
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
