On Wednesday, 5 February 2020 19:41:30 CET Vagrant Cascadian wrote: > A20-OLinuXino-Lime 2 Rev. K Ethernet problem - No connection possible in > installer https://bugs.debian.org/911560
So I've applied the suggestion to build u-boot with CONFIG_GMAC_TX_DELAY=3 I can confirm that both LIME2 rev G2 and rev K boards have a working network with 1G speed with u-boot version debian/2020.01+dfsg-1 and the tweak above. For the record, here's the recipe to get a working network OlinuXino Lime2 rev. K : Setup u-boot source: - git clone https://salsa.debian.org/debian/u-boot.git - sudo apt build-dep u-boot In u-boot: - apply all debian patches: quilt push -a - run: make CROSS_COMPILE=arm-linux-gnueabihf- A20-OLinuXino-Lime2_defconfig - edit .config to set CONFIG_GMAC_TX_DELAY=3 - build u-boot: make CROSS_COMPILE=arm-linux-gnueabihf- You should get a u-boot-sunxi-with-spl.bin file which is the bootloader to install on your SD card (see [1]) First backup your SD card - sudo cp /dev/$sdcard backup.img Then copy the bootloader: - sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/$sdcard bs=1024 seek=8 In both case, $sdcard is to be replaced with the block device file of your SD card. Hope this helps [1] https://linux-sunxi.org/Bootable_SD_card#Bootloader
