Package: src:linux
Version: 5.4.8-1~bpo10+1
Severity: important
Hi,
I'm using singularity on kvm Debian machines. After the last upgrade
that installed the linux-image-5.4.0-0.bpo.2-amd64 kernel, I cannot
start any singularity image. The error is:
$ singularity -v -v shell /srv/scratch/atac-20180906-012322.simg
[...]
VERBOSE: Mounting squashfs image: /dev/loop0 ->
/var/lib/singularity/mnt/container
ERROR : Failed to mount squashfs image in (read only): Invalid argument
ABORT : Retval = 255
Using strace, I investiguate the problem, and find this:
# mount -o ro,loop,offset=31,errors=remount-ro -t squashfs
/srv/scratch/atac-20180906-012322.simg /mnt/
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/loop0, missing
codepage or helper program, or other error.
# mount -o ro,loop,offset=31 -t squashfs /srv/scratch/atac-20180906-012322.simg
/mnt/
# ls /mnt
[ all file of my singularity image ]
With the previous installed kernel (5.3.0-0.bpo.2-amd64), the first mount
(with the "errors=remount-ro" option) succeed. And, of course, strace told
me that singularity is using the "errors=remount-ro" option...
For now, I'm downgrading my kernel and using 5.3.0-0.bpo.2-amd64 as
a workaround.
Regards,
Vincent
PS: see https://github.com/sylabs/singularity/issues/4801 for
the issue in singularity where it will be fixed (errors=remount-ro
removed). But as I'm still using singularity from strech-backports,
(singularity-container is not in buster and, in any case, I need
to stick to 2.X version for singularity due to the use of datacenters
where 3.X images are not yet supported)
-- Package-specific info:
** Version:
Linux version 5.4.0-0.bpo.2-amd64 (debian-ker...@lists.debian.org) (gcc version
8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 5.4.8-1~bpo10+1 (2020-01-07)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.4.0-0.bpo.2-amd64 root=/dev/mapper/ge83982--vm1-root
ro apparmor=0 quiet
** Not tainted
** Kernel log:
[ 2.993838] sd 0:0:0:2: Power-on or device reset occurred
[ 2.993863] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.993864] sd 0:0:0:1: Power-on or device reset occurred
[ 2.995633] sd 0:0:0:2: [sdb] 2147483648 512-byte logical blocks: (1.10
TB/1.00 TiB)
[ 2.995634] sd 0:0:0:1: [sda] 209715200 512-byte logical blocks: (107 GB/100
GiB)
[ 2.995746] sd 0:0:0:1: [sda] Write Protect is off
[ 2.995749] sd 0:0:0:1: [sda] Mode Sense: 63 00 00 08
[ 2.995752] sd 0:0:0:2: [sdb] Write Protect is off
[ 2.995755] sd 0:0:0:2: [sdb] Mode Sense: 63 00 00 08
[ 2.995879] sd 0:0:0:1: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.995884] sd 0:0:0:2: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.999071] sr 0:0:0:0: Power-on or device reset occurred
[ 2.999282] sr 0:0:0:0: [sr0] scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda
tray
[ 2.999284] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.031252] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.067516] sda: sda1 sda2 sda3
[ 3.070413] sd 0:0:0:1: [sda] Attached SCSI disk
[ 3.083294] sdb: sdb1 sdb2
[ 3.086273] sd 0:0:0:2: [sdb] Attached SCSI disk
[ 3.156216] usb 1-1: New USB device found, idVendor=0627, idProduct=0001,
bcdDevice= 0.00
[ 3.156219] usb 1-1: New USB device strings: Mfr=1, Product=3,
SerialNumber=5
[ 3.156221] usb 1-1: Product: QEMU USB Tablet
[ 3.156223] usb 1-1: Manufacturer: QEMU
[ 3.156225] usb 1-1: SerialNumber: 42
[ 3.170058] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.181006] usbcore: registered new interface driver usbhid
[ 3.181006] usbhid: USB HID core driver
[ 3.183898] input: QEMU QEMU USB Tablet as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[ 3.184398] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01
Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[ 3.335960] 9pnet: Installing 9P2000 support
[ 3.364289] random: lvm: uninitialized urandom read (4 bytes read)
[ 3.412111] device-mapper: uevent: version 1.0.3
[ 3.412335] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised:
dm-de...@redhat.com
[ 3.414744] random: lvm: uninitialized urandom read (2 bytes read)
[ 3.490968] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input3
[ 3.803171] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.031278] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 4.789972] pcieport 0000:00:02.6: pciehp: Failed to check link status
[ 4.801959] pcieport 0000:00:02.3: pciehp: Failed to check link status
[ 5.048843] systemd[1]: Inserted module 'autofs4'
[ 5.154338] random: crng init done
[ 5.229945] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2
default-hierarchy=hybrid)
[ 5.230084] systemd[1]: Detected virtualization kvm.
[ 5.230110] systemd[1]: Detected architecture x86-64.
[ 5.254324] systemd[1]: Set hostname to <ge83982-vm1>.
[ 5.263372] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid
argument
[ 6.365257] systemd[1]: /lib/systemd/system/sssd.service:11: PIDFile=
references path below legacy directory /var/run/, updating /var/run/sssd.pid
\xe2\x86\x92 /run/sssd.pid; please update the unit file accordingly.
[ 6.373195] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/samba/smbd.pid \xe2\x86\x92 /run/samba/smbd.pid; please update the
unit file accordingly.
[ 6.442569] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/samba/nmbd.pid \xe2\x86\x92 /run/samba/nmbd.pid; please update the
unit file accordingly.
[ 6.502313] systemd[1]: /lib/systemd/system/autofs.service:7: PIDFile=
references path below legacy directory /var/run/, updating /var/run/autofs.pid
\xe2\x86\x92 /run/autofs.pid; please update the unit file accordingly.
[ 6.601976] systemd[1]: rpc-gssd.service: Wants dependency dropin
/lib/systemd/system/rpc-gssd.service.wants/gssproxy.service target
/etc/init.d/gssproxy has different name
[ 6.772645] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 6.846251] RPC: Registered named UNIX socket transport module.
[ 6.846253] RPC: Registered udp transport module.
[ 6.846253] RPC: Registered tcp transport module.
[ 6.846254] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.898881] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.899023] sd 0:0:0:2: Attached scsi generic sg1 type 0
[ 6.899298] sd 0:0:0:1: Attached scsi generic sg2 type 0
[ 7.217905] systemd-journald[435]: Received request to flush runtime journal
from PID 1
[ 7.890775] EFI Variables Facility v0.08 2004-May-17
[ 7.896024] pstore: Using crash dump compression: deflate
[ 7.896030] pstore: Registered efi as persistent store backend
[ 7.941334] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.057763] iTCO_vendor_support: vendor-support=0
[ 8.059858] i6300ESB timer 0000:09:02.0: initialized. heartbeat=30 sec
(nowayout=0)
[ 8.078483] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.078710] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
[ 8.079101] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.293792] cryptd: max_cpu_qlen set to 1000
[ 8.563181] SSE version of gcm_enc/dec engaged.
[ 8.969868] Adding 20971516k swap on /dev/mapper/ge83982--vm1-swap.
Priority:-2 extents:1 across:20971516k FS
[ 9.179978] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.227706] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.617523] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic:
line_outs=1 (0x3/0x0/0x0/0x0/0x0) type:line
[ 9.617525] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 9.617527] snd_hda_codec_generic hdaudioC0D0: hp_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 9.617528] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 9.617529] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 9.617531] snd_hda_codec_generic hdaudioC0D0: Line=0x5
[ 12.591608] 8021q: 802.1Q VLAN Support v1.8
[ 12.591641] 8021q: adding VLAN 0 to HW filter on device enp1s0
[ 16.234173] broken atomic modeset userspace detected, disabling atomic
[ 38.947063] loop: module loaded
[ 39.046470] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 39.047210] squashfs: Unknown parameter 'errors'
[ 49.833866] squashfs: Unknown parameter 'errors'
[ 228.378511] FS-Cache: Loaded
[ 228.532900] FS-Cache: Netfs 'nfs' registered for caching
[ 228.569959] Key type dns_resolver registered
[ 228.796549] NFS: Registering the id_resolver key type
[ 228.796562] Key type id_resolver registered
[ 228.796563] Key type id_legacy registered
[ 241.564859] squashfs: Unknown parameter 'errors'
[ 257.324490] squashfs: Unknown parameter 'errors'
[ 295.844871] squashfs: Unknown parameter 'errors'
[ 342.733412] squashfs: Unknown parameter 'errors'
[ 416.001492] squashfs: Unknown parameter 'errors'
[ 422.281399] squashfs: Unknown parameter 'errors'
[ 503.757865] squashfs: Unknown parameter 'errors'
** Model information
sys_vendor: QEMU
product_name: Standard PC (Q35 + ICH9, 2009)
product_version: pc-q35-2.8
chassis_vendor: QEMU
chassis_version: pc-q35-2.8
bios_vendor: EFI Development Kit II / OVMF
bios_version: 0.0.0
** Loaded modules:
binfmt_misc
rpcsec_gss_krb5
nfsv4
dns_resolver
nfs
lockd
grace
fscache
squashfs
zstd_decompress
loop
8021q
garp
stp
mrp
llc
rfkill
snd_hda_codec_generic
ledtrig_audio
snd_hda_intel
snd_intel_nhlt
nls_ascii
snd_hda_codec
nls_cp437
vfat
snd_hda_core
crct10dif_pclmul
fat
crc32_pclmul
snd_hwdep
ghash_clmulni_intel
aesni_intel
snd_pcm
snd_timer
crypto_simd
cryptd
glue_helper
joydev
snd
iTCO_wdt
virtio_balloon
soundcore
iTCO_vendor_support
i6300esb
watchdog
virtio_console
serio_raw
pcspkr
evdev
efi_pstore
efivars
qemu_fw_cfg
auth_rpcgss
sg
sunrpc
efivarfs
virtio_rng
rng_core
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
dm_mod
9pnet_virtio
9pnet
hid_generic
usbhid
hid
sr_mod
cdrom
sd_mod
virtio_gpu
ttm
drm_kms_helper
drm
virtio_net
ahci
virtio_scsi
net_failover
libahci
failover
libata
uhci_hcd
ehci_pci
ehci_hcd
scsi_mod
usbcore
psmouse
crc32c_intel
lpc_ich
i2c_i801
mfd_core
usb_common
virtio_pci
virtio_ring
virtio
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller [8086:29c0]
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 VGA compatible controller [0300]: Red Hat, Inc Virtio GPU [1af4:1050]
(rev 01) (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc Virtio GPU [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 90000000 (32-bit, prefetchable) [size=8M]
Region 2: Memory at 1000500000 (64-bit, prefetchable) [size=16K]
Region 4: Memory at 91a02000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:02.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: 91800000-919fffff
Prefetchable memory behind bridge: 0000001000000000-00000010000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.1 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: 91600000-917fffff
Prefetchable memory behind bridge: 0000001000100000-00000010001fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.2 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: 91400000-915fffff
Prefetchable memory behind bridge: 0000001000200000-00000010002fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.3 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: 91200000-913fffff
Prefetchable memory behind bridge: 0000000091b00000-0000000091cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.4 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: 91000000-911fffff
Prefetchable memory behind bridge: 0000001000300000-00000010003fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.5 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: 90e00000-90ffffff
Prefetchable memory behind bridge: 0000001000400000-00000010004fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.6 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: 90c00000-90dfffff
Prefetchable memory behind bridge: 0000000091d00000-0000000091efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at 91a01000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=09, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 90800000-90afffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface
Controller [8086:2918] (rev 02)
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA Controller [AHCI mode] [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 36
Region 4: I/O ports at 10a0 [size=32]
Region 5: Memory at 91a00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1000 [size=64]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device
[1af4:1041] (rev 01)
Subsystem: Red Hat, Inc Virtio network device [1af4:1100]
Physical Slot: 0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 1: Memory at 91800000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at 1000000000 (64-bit, prefetchable) [size=16K]
Expansion ROM at 91840000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
02:00.0 SCSI storage controller [0100]: Red Hat, Inc Virtio SCSI [1af4:1048]
(rev 01)
Subsystem: Red Hat, Inc Virtio SCSI [1af4:1100]
Physical Slot: 0-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 1: Memory at 91600000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at 1000100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
03:00.0 Communication controller [0780]: Red Hat, Inc Virtio console
[1af4:1043] (rev 01)
Subsystem: Red Hat, Inc Virtio console [1af4:1100]
Physical Slot: 0-2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 1: Memory at 91400000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at 1000200000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
05:00.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon
[1af4:1045] (rev 01)
Subsystem: Red Hat, Inc Virtio memory balloon [1af4:1100]
Physical Slot: 0-4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 4: Memory at 1000300000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
06:00.0 Unclassified device [00ff]: Red Hat, Inc Virtio RNG [1af4:1044] (rev 01)
Subsystem: Red Hat, Inc Virtio RNG [1af4:1100]
Physical Slot: 0-5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 4: Memory at 1000400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
08:00.0 PCI bridge [0604]: Red Hat, Inc. QEMU PCI-PCI bridge [1b36:0001]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at 90a00000 (64-bit, non-prefetchable) [size=256]
Bus: primary=08, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 90800000-909fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: shpchp
09:01.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller [8086:2668] (rev 01)
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 90800000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
09:02.0 System peripheral [0880]: Intel Corporation 6300ESB Watchdog Timer
[8086:25ab]
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 90804000 (32-bit, non-prefetchable) [size=16]
Kernel driver in use: i6300ESB timer
Kernel modules: i6300esb
** USB devices:
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 10.2
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates')
Architecture: amd64 (x86_64)
Kernel: Linux 5.4.0-0.bpo.2-amd64 (SMP w/22 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8),
LANGUAGE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-5.4.0-0.bpo.2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-5.4.0-0.bpo.2-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-5.4.0-0.bpo.2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-20
pn linux-doc-5.4 <none>
Versions of packages linux-image-5.4.0-0.bpo.2-amd64 is related to:
ii firmware-amd-graphics 20190114-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190114-2
ii firmware-misc-nonfree 20190114-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
