Source: create-resources Version: 0.1.3-5 Severity: important Usertags: scons_ftbfs
Hello, in the context of the change to Python3 also Scons was revised. With the current version 3.1.2-1 from Experimental the changeover is finished so far. However, an error occurred while building your package. The build log is attached. Please check it and fix the error. CU Jörg -- New: GPG Fingerprint: 63E0 075F C8D4 3ABB 35AB 30EE 09F8 9F3C 8CA1 D25D GPG key (long) : 09F89F3C8CA1D25D GPG Key : 8CA1D25D CAcert Key S/N : 0E:D4:56 Old pgp Key: BE581B6E (revoked since 2014-12-31). Jörg Frings-Fürst D-54470 Lieser git: https://jff.email/cgit/ Threema: SYR8SJXB Wire: @joergfringsfuerst Skype: joergpenguin Ring: jff Telegram: @joergfringsfuerst My wish list: - Please send me a picture from the nature at your home.
dh clean
dh: Compatibility levels before 9 are deprecated (level 7 in use)
debian/rules override_dh_auto_clean
make[1]: Entering directory
'/data/entwicklung/linux/debian/trans_scons/create-resources-0.1.3'
dh_auto_clean
dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use)
rm -f .sconsign.dblite
make[1]: Leaving directory
'/data/entwicklung/linux/debian/trans_scons/create-resources-0.1.3'
debian/rules override_dh_clean
make[1]: Entering directory
'/data/entwicklung/linux/debian/trans_scons/create-resources-0.1.3'
dh_clean -XSConscript~
dh_clean: Compatibility levels before 9 are deprecated (level 7 in use)
make[1]: Leaving directory
'/data/entwicklung/linux/debian/trans_scons/create-resources-0.1.3'
dpkg-source: info: using source format '3.0 (quilt)'
dpkg-source: info: building create-resources using existing
./create-resources_0.1.3.orig.tar.gz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: building create-resources in
create-resources_0.1.3-5.debian.tar.xz
dpkg-source: info: building create-resources in create-resources_0.1.3-5.dsc
[0mI: Generating source changes file for original dsc[0m
dpkg-genchanges: info: not including original source code in upload
[1;33mW: cgroups are not available on the host, not using them.[0m
[0mI: pbuilder: network access will be disabled during build[0m
[0mI: Current time: Fri Dec 27 11:51:59 CET 2019[0m
[0mI: pbuilder-time-stamp: 1577443919[0m
[0mI: Building the build Environment[0m
[0mI: extracting base tarball [/var/cache/pbuilder/sid-amd64-base.tgz][0m
[0mI: copying local configuration[0m
[0mI: mounting /proc filesystem[0m
[0mI: mounting /sys filesystem[0m
[0mI: creating /{dev,run}/shm[0m
[0mI: mounting /dev/pts filesystem[0m
[0mI: redirecting /dev/ptmx to /dev/pts/ptmx[0m
[0mI: Mounting /var/cache/debs[0m
[0mI: policy-rc.d already exists[0m
[1;33mW: Could not create compatibility symlink because /tmp/buildd exists and
it is not a directory[0m
[0mI: Obtaining the cached apt archive contents[0m
[0mI: Copying source file[0m
[0mI: copying [../create-resources_0.1.3-5.dsc][0m
[0mI: copying [../create-resources_0.1.3.orig.tar.gz][0m
[0mI: copying [../create-resources_0.1.3-5.debian.tar.xz][0m
[0mI: Extracting source[0m
dpkg-source: warning: extracting unsigned source package
(create-resources_0.1.3-5.dsc)
dpkg-source: info: extracting create-resources in create-resources-0.1.3
dpkg-source: info: unpacking create-resources_0.1.3.orig.tar.gz
dpkg-source: info: unpacking create-resources_0.1.3-5.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 0001-add_name_header_to_GIMP_palettes.patch
[0mI: using fakeroot in build.[0m
[0mI: Installing the build-deps[0m
[0mI: user script /var/cache/pbuilder/build//304480/tmp/hooks/D05deps
starting[0m
Get:1 file:/var/cache/debs ./ InRelease
Ign:1 file:/var/cache/debs ./ InRelease
Get:2 file:/var/cache/debs ./ Release
Ign:2 file:/var/cache/debs ./ Release
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages [897 B]
Get:4 http://mirror.eu.oneandone.net/debian/ sid InRelease [142 kB]
Get:5 http://mirror.eu.oneandone.net/debian/ sid/non-free amd64
Packages.diff/Index [27.8 kB]
Get:6 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages.diff/Index
[27.9 kB]
Get:7 http://mirror.eu.oneandone.net/debian/ sid/non-free amd64 Packages
2019-12-25-0215.49.pdiff [200 B]
Get:7 http://mirror.eu.oneandone.net/debian/ sid/non-free amd64 Packages
2019-12-25-0215.49.pdiff [200 B]
Get:8 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-24-1431.59.pdiff [15.5 kB]
Get:9 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-24-2015.43.pdiff [20.2 kB]
Get:10 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-25-0215.49.pdiff [37.9 kB]
Get:11 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-25-0820.35.pdiff [5708 B]
Get:12 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-25-1417.31.pdiff [11.6 kB]
Get:13 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-25-2020.01.pdiff [14.2 kB]
Get:14 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-26-0217.44.pdiff [41.8 kB]
Get:15 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-26-0820.50.pdiff [7032 B]
Get:16 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-26-1413.53.pdiff [13.1 kB]
Get:17 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-26-2017.33.pdiff [33.4 kB]
Get:18 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-27-0215.07.pdiff [17.7 kB]
Get:19 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-27-0815.12.pdiff [8159 B]
Get:19 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-27-0815.12.pdiff [8159 B]
Fetched 425 kB in 2s (211 kB/s)
Reading package lists...
[0mI: user script /var/cache/pbuilder/build//304480/tmp/hooks/D05deps
finished[0m
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: amd64
Maintainer: Debian Pbuilder Team <pbuilder-ma...@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by
pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: debhelper (>= 7.0.50~), scons
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in
'/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 15785 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring
anyway as you requested:
pbuilder-satisfydepends-dummy depends on debhelper (>= 7.0.50~); however:
Package debhelper is not installed.
pbuilder-satisfydepends-dummy depends on scons; however:
Package scons is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version
(0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version
(0.invalid.0)
The following NEW packages will be installed:
autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a}
debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a}
gettext{a} gettext-base{a} groff-base{a} intltool-debian{a}
libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libdebhelper-perl{a} libelf1{a}
libexpat1{a} libfile-stripnondeterminism-perl{a} libicu63{a} libmagic-mgc{a}
libmagic1{a} libmpdec2{a} libpipeline1{a} libpython3-stdlib{a}
libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline8{a} libsigsegv2{a}
libssl1.1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a}
m4{a} man-db{a} mime-support{a} po-debconf{a} python3{a} python3-minimal{a}
python3.7{a} python3.7-minimal{a} readline-common{a} scons{a} sensible-utils{a}
The following packages are RECOMMENDED but will NOT be installed:
curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget
0 packages upgraded, 47 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/25.2 MB of archives. After unpacking 97.8 MB will be used.
Writing extended state information...
Get: 1 file:/var/cache/debs ./ scons 3.1.2-1 [564 kB]
Preconfiguring packages ...
Selecting previously unselected package libbsd0:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15785 files and directories currently installed.)
Preparing to unpack .../0-libbsd0_0.10.0-1_amd64.deb ...
Unpacking libbsd0:amd64 (0.10.0-1) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../1-bsdmainutils_11.1.2+b1_amd64.deb ...
Unpacking bsdmainutils (11.1.2+b1) ...
Selecting previously unselected package libuchardet0:amd64.
Preparing to unpack .../2-libuchardet0_0.0.6-3_amd64.deb ...
Unpacking libuchardet0:amd64 (0.0.6-3) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../3-groff-base_1.22.4-4_amd64.deb ...
Unpacking groff-base (1.22.4-4) ...
Selecting previously unselected package libpipeline1:amd64.
Preparing to unpack .../4-libpipeline1_1.5.1-3_amd64.deb ...
Unpacking libpipeline1:amd64 (1.5.1-3) ...
Selecting previously unselected package man-db.
Preparing to unpack .../5-man-db_2.9.0-2_amd64.deb ...
Unpacking man-db (2.9.0-2) ...
Selecting previously unselected package libssl1.1:amd64.
Preparing to unpack .../6-libssl1.1_1.1.1d-2_amd64.deb ...
Unpacking libssl1.1:amd64 (1.1.1d-2) ...
Selecting previously unselected package libpython3.7-minimal:amd64.
Preparing to unpack .../7-libpython3.7-minimal_3.7.6-1_amd64.deb ...
Unpacking libpython3.7-minimal:amd64 (3.7.6-1) ...
Selecting previously unselected package libexpat1:amd64.
Preparing to unpack .../8-libexpat1_2.2.9-1_amd64.deb ...
Unpacking libexpat1:amd64 (2.2.9-1) ...
Selecting previously unselected package python3.7-minimal.
Preparing to unpack .../9-python3.7-minimal_3.7.6-1_amd64.deb ...
Unpacking python3.7-minimal (3.7.6-1) ...
Setting up libssl1.1:amd64 (1.1.1d-2) ...
Setting up libpython3.7-minimal:amd64 (3.7.6-1) ...
Setting up libexpat1:amd64 (2.2.9-1) ...
Setting up python3.7-minimal (3.7.6-1) ...
Selecting previously unselected package python3-minimal.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 16696 files and directories currently installed.)
Preparing to unpack .../0-python3-minimal_3.7.5-3_amd64.deb ...
Unpacking python3-minimal (3.7.5-3) ...
Selecting previously unselected package mime-support.
Preparing to unpack .../1-mime-support_3.64_all.deb ...
Unpacking mime-support (3.64) ...
Selecting previously unselected package libmpdec2:amd64.
Preparing to unpack .../2-libmpdec2_2.4.2-2_amd64.deb ...
Unpacking libmpdec2:amd64 (2.4.2-2) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../3-readline-common_8.0-3_all.deb ...
Unpacking readline-common (8.0-3) ...
Selecting previously unselected package libreadline8:amd64.
Preparing to unpack .../4-libreadline8_8.0-3_amd64.deb ...
Unpacking libreadline8:amd64 (8.0-3) ...
Selecting previously unselected package libpython3.7-stdlib:amd64.
Preparing to unpack .../5-libpython3.7-stdlib_3.7.6-1_amd64.deb ...
Unpacking libpython3.7-stdlib:amd64 (3.7.6-1) ...
Selecting previously unselected package python3.7.
Preparing to unpack .../6-python3.7_3.7.6-1_amd64.deb ...
Unpacking python3.7 (3.7.6-1) ...
Selecting previously unselected package libpython3-stdlib:amd64.
Preparing to unpack .../7-libpython3-stdlib_3.7.5-3_amd64.deb ...
Unpacking libpython3-stdlib:amd64 (3.7.5-3) ...
Setting up python3-minimal (3.7.5-3) ...
Selecting previously unselected package python3.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17157 files and directories currently installed.)
Preparing to unpack .../00-python3_3.7.5-3_amd64.deb ...
Unpacking python3 (3.7.5-3) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../01-sensible-utils_0.0.12+nmu1_all.deb ...
Unpacking sensible-utils (0.0.12+nmu1) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../02-libmagic-mgc_1%3a5.37-6_amd64.deb ...
Unpacking libmagic-mgc (1:5.37-6) ...
Selecting previously unselected package libmagic1:amd64.
Preparing to unpack .../03-libmagic1_1%3a5.37-6_amd64.deb ...
Unpacking libmagic1:amd64 (1:5.37-6) ...
Selecting previously unselected package file.
Preparing to unpack .../04-file_1%3a5.37-6_amd64.deb ...
Unpacking file (1:5.37-6) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../05-gettext-base_0.19.8.1-10_amd64.deb ...
Unpacking gettext-base (0.19.8.1-10) ...
Selecting previously unselected package libsigsegv2:amd64.
Preparing to unpack .../06-libsigsegv2_2.12-2_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.12-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../07-m4_1.4.18-4_amd64.deb ...
Unpacking m4 (1.4.18-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../08-autoconf_2.69-11_all.deb ...
Unpacking autoconf (2.69-11) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../09-autotools-dev_20180224.1_all.deb ...
Unpacking autotools-dev (20180224.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../10-automake_1%3a1.16.1-4_all.deb ...
Unpacking automake (1:1.16.1-4) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../11-autopoint_0.19.8.1-10_all.deb ...
Unpacking autopoint (0.19.8.1-10) ...
Selecting previously unselected package libtool.
Preparing to unpack .../12-libtool_2.4.6-11_all.deb ...
Unpacking libtool (2.4.6-11) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../13-dh-autoreconf_19_all.deb ...
Unpacking dh-autoreconf (19) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../14-libdebhelper-perl_12.7.2_all.deb ...
Unpacking libdebhelper-perl (12.7.2) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../15-libarchive-zip-perl_1.67-1_all.deb ...
Unpacking libarchive-zip-perl (1.67-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../16-libsub-override-perl_0.09-2_all.deb ...
Unpacking libsub-override-perl (0.09-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../17-libfile-stripnondeterminism-perl_1.6.3-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.6.3-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../18-dh-strip-nondeterminism_1.6.3-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.6.3-1) ...
Selecting previously unselected package libelf1:amd64.
Preparing to unpack .../19-libelf1_0.176-1.1_amd64.deb ...
Unpacking libelf1:amd64 (0.176-1.1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../20-dwz_0.13-5_amd64.deb ...
Unpacking dwz (0.13-5) ...
Selecting previously unselected package libicu63:amd64.
Preparing to unpack .../21-libicu63_63.2-2_amd64.deb ...
Unpacking libicu63:amd64 (63.2-2) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../22-libxml2_2.9.4+dfsg1-8_amd64.deb ...
Unpacking libxml2:amd64 (2.9.4+dfsg1-8) ...
Selecting previously unselected package libcroco3:amd64.
Preparing to unpack .../23-libcroco3_0.6.13-1_amd64.deb ...
Unpacking libcroco3:amd64 (0.6.13-1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../24-gettext_0.19.8.1-10_amd64.deb ...
Unpacking gettext (0.19.8.1-10) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../25-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../26-po-debconf_1.0.21_all.deb ...
Unpacking po-debconf (1.0.21) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../27-debhelper_12.7.2_all.deb ...
Unpacking debhelper (12.7.2) ...
Selecting previously unselected package scons.
Preparing to unpack .../28-scons_3.1.2-1_all.deb ...
Unpacking scons (3.1.2-1) ...
Setting up libpipeline1:amd64 (1.5.1-3) ...
Setting up mime-support (3.64) ...
Setting up libmagic-mgc (1:5.37-6) ...
Setting up libarchive-zip-perl (1.67-1) ...
Setting up libdebhelper-perl (12.7.2) ...
Setting up libmagic1:amd64 (1:5.37-6) ...
Setting up gettext-base (0.19.8.1-10) ...
Setting up file (1:5.37-6) ...
Setting up libicu63:amd64 (63.2-2) ...
Setting up autotools-dev (20180224.1) ...
Setting up libsigsegv2:amd64 (2.12-2) ...
Setting up autopoint (0.19.8.1-10) ...
Setting up sensible-utils (0.0.12+nmu1) ...
Setting up libuchardet0:amd64 (0.0.6-3) ...
Setting up libsub-override-perl (0.09-2) ...
Setting up libmpdec2:amd64 (2.4.2-2) ...
Setting up libbsd0:amd64 (0.10.0-1) ...
Setting up libelf1:amd64 (0.176-1.1) ...
Setting up readline-common (8.0-3) ...
Setting up libxml2:amd64 (2.9.4+dfsg1-8) ...
Setting up libfile-stripnondeterminism-perl (1.6.3-1) ...
Setting up libtool (2.4.6-11) ...
Setting up libreadline8:amd64 (8.0-3) ...
Setting up m4 (1.4.18-4) ...
Setting up bsdmainutils (11.1.2+b1) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write)
in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in
auto mode
Setting up libcroco3:amd64 (0.6.13-1) ...
Setting up autoconf (2.69-11) ...
Setting up dh-strip-nondeterminism (1.6.3-1) ...
Setting up dwz (0.13-5) ...
Setting up groff-base (1.22.4-4) ...
Setting up automake (1:1.16.1-4) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake
(automake) in auto mode
Setting up libpython3.7-stdlib:amd64 (3.7.6-1) ...
Setting up gettext (0.19.8.1-10) ...
Setting up man-db (2.9.0-2) ...
Building database of manual pages ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up libpython3-stdlib:amd64 (3.7.5-3) ...
Setting up python3.7 (3.7.6-1) ...
Setting up po-debconf (1.0.21) ...
Setting up python3 (3.7.5-3) ...
Setting up scons (3.1.2-1) ...
Setting up dh-autoreconf (19) ...
Setting up debhelper (12.7.2) ...
Processing triggers for libc-bin (2.29-6) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
apt-utils is already the newest version (1.8.4).
The following NEW packages will be installed:
fakeroot libfakeroot
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/132 kB of archives.
After this operation, 393 kB of additional disk space will be used.
Selecting previously unselected package libfakeroot:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 18808 files and directories currently installed.)
Preparing to unpack .../libfakeroot_1.24-1_amd64.deb ...
Unpacking libfakeroot:amd64 (1.24-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../fakeroot_1.24-1_amd64.deb ...
Unpacking fakeroot (1.24-1) ...
Setting up libfakeroot:amd64 (1.24-1) ...
Setting up fakeroot (1.24-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot
(fakeroot) in auto mode
Processing triggers for man-db (2.9.0-2) ...
Processing triggers for libc-bin (2.29-6) ...
[0mI: Copying back the cached apt archive contents[0m
[0mI: Building the package[0m
[0mI: Running cd /build/create-resources-0.1.3/ && env
PATH="/usr/sbin:/usr/bin:/sbin:/bin" HOME="/nonexistent" dpkg-buildpackage -us
-uc -d[0m
dpkg-buildpackage: info: source package create-resources
dpkg-buildpackage: info: source version 0.1.3-5
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Alessio Treglia <ales...@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture amd64
fakeroot debian/rules clean
dh clean
dh: Compatibility levels before 9 are deprecated (level 7 in use)
debian/rules override_dh_auto_clean
make[1]: Entering directory '/build/create-resources-0.1.3'
dh_auto_clean
dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use)
rm -f .sconsign.dblite
make[1]: Leaving directory '/build/create-resources-0.1.3'
debian/rules override_dh_clean
make[1]: Entering directory '/build/create-resources-0.1.3'
dh_clean -XSConscript~
dh_clean: Compatibility levels before 9 are deprecated (level 7 in use)
make[1]: Leaving directory '/build/create-resources-0.1.3'
dpkg-source -b .
dpkg-source: info: using source format '3.0 (quilt)'
dpkg-source: info: building create-resources using existing
./create-resources_0.1.3.orig.tar.gz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: building create-resources in
create-resources_0.1.3-5.debian.tar.xz
dpkg-source: info: building create-resources in create-resources_0.1.3-5.dsc
debian/rules build
dh build
dh: Compatibility levels before 9 are deprecated (level 7 in use)
dh_update_autotools_config
fakeroot debian/rules binary
dh binary
dh: Compatibility levels before 9 are deprecated (level 7 in use)
dh_testroot
dh_prep
dh_installdirs
dh_installdirs: Compatibility levels before 9 are deprecated (level 7 in use)
debian/rules override_dh_auto_install
make[1]: Entering directory '/build/create-resources-0.1.3'
scons -Q install
PREFIX=/build/create-resources-0.1.3/debian/create-resources/usr
File "/build/create-resources-0.1.3/SConstruct", line 12
print "Preparing Create Resource Files ..."
^
SyntaxError: Missing parentheses in call to 'print'. Did you mean
print("Preparing Create Resource Files ...")?
make[1]: *** [debian/rules:11: override_dh_auto_install] Error 2
make[1]: Leaving directory '/build/create-resources-0.1.3'
make: *** [debian/rules:4: binary] Error 2
dpkg-buildpackage: error: fakeroot debian/rules binary subprocess returned exit
status 2
[0mI: copying local configuration[0m
[0;31mE: Failed autobuilding of package[0m
[0mI: user script /var/cache/pbuilder/build//304480/tmp/hooks/C10shell
starting[0m
Reading package lists...
Building dependency tree...
Reading state information...
bash is already the newest version (5.0-5).
mc is already the newest version (3:4.8.23-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow
instead.
[0mI: user script /var/cache/pbuilder/build//304480/tmp/hooks/C10shell
finished[0m
[0mI: unmounting /var/cache/debs filesystem[0m
[0mI: unmounting dev/ptmx filesystem[0m
[0mI: unmounting dev/pts filesystem[0m
[0mI: unmounting dev/shm filesystem[0m
[0mI: unmounting proc filesystem[0m
[0mI: unmounting sys filesystem[0m
[0mI: cleaning the build env [0m
[0mI: removing directory /var/cache/pbuilder/build//304480 and its
subdirectories[0m
signature.asc
Description: This is a digitally signed message part
