Package: linux-image-2.6.15-1-686
Version: 2.6.15-8
I'm currently using an up-to-date Etch on my IBM Thinkpad T21. The only
way I can successfully talk to an external modem connected to the serial
port is to disable acpi. When acpi is disabled, the modem works
perfectly - I can interrogate it using minicom and dialling out using
pon works perfectly. However, when acpi is enabled, I can't get any
response from the modem at all - I can start minicom, but the usual ATI
commands return nothing. Here's some debug info:
A) WITH ACPI DISABLED:
Dmesg:
Linux version 2.6.15-1-686 (Debian 2.6.15-8) ([EMAIL PROTECTED]) (gcc
version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 Mon Mar 6
15:27:08 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro acpi=off vga=828
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01401000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 696.920 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 511924k/524224k available (1425k kernel code, 11756k reserved,
530k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 1395.13 BogoMIPS
(lpj=697568)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 4465k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f71d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb1f3, dseg 0x400
PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-103f claimed by PIIX4 ACPI
PCI quirk: region 1040-104f claimed by PIIX4 SMB
PIIX4 devres C PIO at 15e8-15ef
PIIX4 devres I PIO at 03f0-03f7
PIIX4 devres J PIO at 002e-002f
Boot video device is 0000:01:00.0
PCI: Discovered primary peer bus 08 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
pnp: 00:00: ioport range 0x15e8-0x15ef has been reserved
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0x1000-0x103f has been reserved
pnp: 00:0b: ioport range 0x1040-0x104f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f0000000-f7ffffff
PREFETCH window: 38000000-380fffff
PCI: Bus 2, cardbus bridge: 0000:00:02.0
IO window: 00001400-000014ff
IO window: 00002400-000024ff
PREFETCH window: 30000000-31ffffff
MEM window: 32000000-33ffffff
PCI: Bus 6, cardbus bridge: 0000:00:02.1
IO window: 00002800-000028ff
IO window: 00002c00-00002cff
PREFETCH window: 34000000-35ffffff
MEM window: 36000000-37ffffff
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:05.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Found IRQ 11 for device 0000:00:02.1
audit: initializing netlink socket (disabled)
audit(1143631422.831:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 5742k,
total 8192k
vesafb: mode is 1400x1050x16, linelength=2800, pages=1
vesafb: protected mode interface info at c000:882d
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is VGA compatible
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:0e activated.
00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
Freeing unused kernel memory: 144k freed
input: AT Translated Set 2 keyboard as /class/input/input0
PCI: Found IRQ 11 for device 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:03.1
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:03.0: 3Com PCI 3c556B Laptop Hurricane at e081c400. Vers
LK1.1.19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
hda: IBM-DJSA-232, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00001c20
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hda: max request size: 128KiB
hda: 62506080 sectors (32003 MB) w/1874KiB Cache, CHS=65535/15/63,
UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 1-1: new full speed USB device using uhci_hcd and address 2
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM Laptop detected; this module may corrupt
your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:05.0
PCI: Sharing IRQ 11 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: ISA IRQ mask 0x06b8, PCI irq 11
Socket status: 30000006
PCI: Found IRQ 11 for device 0000:00:02.1
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x06b8, PCI irq 11
Socket status: 30000006
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PCI: Found IRQ 11 for device 0000:00:05.0
PCI: Sharing IRQ 11 with 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:01:00.0
cs46xx: failure waiting for FIFO command to complete
Real Time Clock Driver v1.12
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1924kHz
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 0
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
irda_init()
NET: Registered protocol family 23
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input2
Adding 982760k swap on /dev/hda7. Priority:-1 extents:1 across:982760k
EXT3 FS on hda3, internal journal
ndiswrapper version 1.10 loaded (preempt=no,smp=no)
ndiswrapper: driver rt2500usb (BELKIN,07/15/2004, 1.02.00.0000) loaded
wlan0: vendor: 'Ralink Technology Inc.'
wlan0: ndiswrapper ethernet device 00:11:d8:dc:18:dc using driver
rt2500usb, 0B05:1706.F.conf
wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
usbcore: registered new driver ndiswrapper
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
wlan0: no IPv6 routers present
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Unknown key released (translated set 2, code 0x7f on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 7f <keycode>' to make it known.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Unknown key released (translated set 2, code 0x7f on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 7f <keycode>' to make it known.
input: AT Translated Set 2 keyboard as /class/input/input3
In the dmesg above are the lines:
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:0e activated.
00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
cat /proc/interupts:
CPU0
0: 52778634 XT-PIC timer
1: 80740 XT-PIC i8042
2: 0 XT-PIC cascade
7: 17 XT-PIC parport0
8: 4 XT-PIC rtc
11: 1533247 XT-PIC uhci_hcd:usb1, yenta, yenta, CS46XX
12: 856555 XT-PIC i8042
14: 61979 XT-PIC ide0
15: 117 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03bc-03be : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
04d0-04d1 : pnp 00:0b
07bc-07be : parport0
0cf8-0cff : PCI conf1
1000-103f : 0000:00:07.3
1000-103f : pnp 00:0b
1040-104f : 0000:00:07.3
1040-104f : pnp 00:0b
1400-14ff : PCI CardBus #02
15e8-15ef : pnp 00:00
1800-18ff : 0000:00:03.0
1c00-1c0f : 0000:00:07.1
1c00-1c07 : ide0
1c08-1c0f : ide1
1c20-1c3f : 0000:00:07.2
1c20-1c3f : uhci_hcd
2000-20ff : 0000:00:03.1
2400-24ff : PCI CardBus #02
2800-28ff : PCI CardBus #06
2c00-2cff : PCI CardBus #06
B) WITH ACPI ENABLED:
Dmesg:
Linux version 2.6.15-1-686 (Debian 2.6.15-8) ([EMAIL PROTECTED]) (gcc
version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 Mon Mar 6
15:27:08 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7120
ACPI: RSDT (v001 PTLTD RSDT 0x06041160 LTP 0x00000000) @
0x1fff4c5d
ACPI: FADT (v001 IBM TP-T21 0x06041160 0x00000000) @ 0x1fffeb65
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06041160 LTP 0x00000001) @
0x1fffebd9
ACPI: DSDT (v001 IBM TP-T21 0x06041160 MSFT 0x0100000c) @
0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro vga=828
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01401000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 697.126 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 511924k/524224k available (1425k kernel code, 11756k reserved,
530k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 1394.69 BogoMIPS
(lpj=697347)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0800)
checking if image is initramfs... it is
Freeing initrd memory: 4465k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 1000-103f claimed by PIIX4 ACPI
PCI quirk: region 1040-104f claimed by PIIX4 SMB
PIIX4 devres C PIO at 15e8-15ef
PIIX4 devres I PIO at 03f0-03f7
PIIX4 devres J PIO at 002e-002f
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
ACPI: Embedded Controller [EC] (gpe 9)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:01: ioport range 0x1000-0x103f could not be reserved
pnp: 00:01: ioport range 0x1040-0x104f has been reserved
pnp: 00:01: ioport range 0xfe00-0xfe0f has been reserved
pnp: 00:08: ioport range 0x15e0-0x15ef has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f0000000-f7ffffff
PREFETCH window: 38000000-380fffff
PCI: Bus 2, cardbus bridge: 0000:00:02.0
IO window: 00001400-000014ff
IO window: 00002400-000024ff
PREFETCH window: 30000000-31ffffff
MEM window: 32000000-33ffffff
PCI: Bus 6, cardbus bridge: 0000:00:02.1
IO window: 00002800-000028ff
IO window: 00002c00-00002cff
PREFETCH window: 34000000-35ffffff
MEM window: 36000000-37ffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
audit(1143684989.937:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 5742k,
total 8192k
vesafb: mode is 1400x1050x16, linelength=2800, pages=1
vesafb: protected mode interface info at c000:882d
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is VGA compatible
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:0b activated.
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
LID SLPB PCI0 USB UART
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 144k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (55 C)
PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:03.0: 3Com PCI 3c556B Laptop Hurricane at e080e400. Vers
LK1.1.19
PCI: Setting latency timer of device 0000:00:03.0 to 64
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
hda: IBM-DJSA-232, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00001c20
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hda: max request size: 128KiB
hda: 62506080 sectors (32003 MB) w/1874KiB Cache, CHS=65535/15/63,
UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 1-1: new full speed USB device using uhci_hcd and address 2
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
Floppy drive(s): fd0 is 1.44M
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
FDC 0 is a National Semiconductor PC87306
input: PC Speaker as /class/input/input1
Real Time Clock Driver v1.12
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM Laptop detected; this module may corrupt
your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
cs46xx: failure waiting for FIFO command to complete
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
mice: PS/2 mouse device common for all mice
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 0
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
irda_init()
NET: Registered protocol family 23
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input2
Adding 982760k swap on /dev/hda7. Priority:-1 extents:1 across:982760k
EXT3 FS on hda3, internal journal
ndiswrapper version 1.10 loaded (preempt=no,smp=no)
ndiswrapper: driver rt2500usb (BELKIN,07/15/2004, 1.02.00.0000) loaded
wlan0: vendor: 'Ralink Technology Inc.'
wlan0: ndiswrapper ethernet device 00:11:d8:dc:18:dc using driver
rt2500usb, 0B05:1706.F.conf
wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
usbcore: registered new driver ndiswrapper
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: AC Adapter [AC] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
wlan0: no IPv6 routers present
Again, in the file above are the lines:
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:0b activated.
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
cat /proc/interrupts:
CPU0
0: 668721 XT-PIC timer
1: 2636 XT-PIC i8042
2: 0 XT-PIC cascade
7: 3 XT-PIC parport0
8: 4 XT-PIC rtc
9: 11 XT-PIC acpi
11: 15507 XT-PIC uhci_hcd:usb1, yenta, yenta, CS46XX
12: 17311 XT-PIC i8042
14: 6553 XT-PIC ide0
15: 117 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
cat /proc/ioports:
0000-001f : dma1
0020-0021 : pic1
0022-0022 : PM2_CNT_BLK
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03bc-03be : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
07bc-07be : parport0
0cf8-0cff : PCI conf1
1000-103f : 0000:00:07.3
1000-103f : motherboard
1000-1003 : PM1a_EVT_BLK
1004-1005 : PM1a_CNT_BLK
1008-100b : PM_TMR
100c-100f : GPE0_BLK
1010-1015 : ACPI CPU throttle
1040-104f : 0000:00:07.3
1040-104f : motherboard
1040-104f : pnp 00:01
1400-14ff : PCI CardBus #02
15e0-15ef : motherboard
15e0-15ef : pnp 00:08
1800-18ff : 0000:00:03.0
1c00-1c0f : 0000:00:07.1
1c00-1c07 : ide0
1c08-1c0f : ide1
1c20-1c3f : 0000:00:07.2
1c20-1c3f : uhci_hcd
2000-20ff : 0000:00:03.1
2400-24ff : PCI CardBus #02
2800-28ff : PCI CardBus #06
2c00-2cff : PCI CardBus #06
fe00-fe0f : motherboard
fe00-fe0f : pnp 00:01
Please let me know if there is any better way I can debug this problem,
other than just saying "I can only talk to my modem with acpi disabled".
Thanks, Hammy Hamster
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
