Package: src:linux
Version: 4.19.67-2+deb10u1
Severity: important
Dear Maintainer,
* What led up to the situation?
System suspension creates this situation, the system works normally if
never suspended. This makes me think that there is a problem with the linux
kernel, unrelated with the hardware.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Not suspending the system is effective to avoid this situation.
* What was the outcome of this action?
The disk is available and the RAID system works.
-- Package-specific info:
** Version:
Linux version 4.19.0-6-amd64 (debian-ker...@lists.debian.org) (gcc version
8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64
root=UUID=20e88cf6-5790-4642-9d04-70bc2bd6d1a4 ro iommu=soft quiet
intel_iommu=on
** Tainted: COE (13312)
* Module from drivers/staging has been loaded.
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Kernel log:
[23750.481353] sd 6:0:0:0: [sdb] tag#12 CDB: Read(10) 28 00 2e 05 1d 80 00 00
08 00
[23750.481357] print_req_error: I/O error, dev sdb, sector 772087168
[23750.483086] sd 6:0:0:0: [sdb] tag#25 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[23750.483093] sd 6:0:0:0: [sdb] tag#25 CDB: Read(10) 28 00 2d c5 54 18 00 00
08 00
[23750.483096] print_req_error: I/O error, dev sdb, sector 767906840
[23750.483469] sd 6:0:0:0: [sdb] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[23750.483474] sd 6:0:0:0: [sdb] tag#26 CDB: Read(10) 28 00 2d c5 54 20 00 00
08 00
[23750.483477] print_req_error: I/O error, dev sdb, sector 767906848
[23750.483912] sd 6:0:0:0: [sdb] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[23750.483919] sd 6:0:0:0: [sdb] tag#13 CDB: Read(10) 28 00 2d c5 54 18 00 00
08 00
[23750.483922] print_req_error: I/O error, dev sdb, sector 767906840
[23750.485397] sd 6:0:0:0: [sdb] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[23750.485402] sd 6:0:0:0: [sdb] tag#8 CDB: Read(10) 28 00 2e 48 0a b8 00 00 08
00
[23750.485404] print_req_error: I/O error, dev sdb, sector 776473272
[23750.485682] sd 6:0:0:0: [sdb] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[23750.485686] sd 6:0:0:0: [sdb] tag#9 CDB: Read(10) 28 00 2e 48 0a d0 00 00 08
00
[23750.485689] print_req_error: I/O error, dev sdb, sector 776473296
[23750.485941] sd 6:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[23750.485944] sd 6:0:0:0: [sdb] tag#10 CDB: Read(10) 28 00 2e 48 0a b8 00 00
08 00
[23750.485945] print_req_error: I/O error, dev sdb, sector 776473272
[23750.487140] sd 6:0:0:0: [sdb] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[23750.487144] sd 6:0:0:0: [sdb] tag#11 CDB: Read(10) 28 00 2d c5 6e 08 00 00
08 00
[23750.487145] print_req_error: I/O error, dev sdb, sector 767913480
[23769.998540] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[23833.003417] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[23896.000018] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[23919.016995] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[23946.736467] R8188EU: linked_status_chk(wlx04ab1821eccf) disconnect or roaming
[23949.471326] R8188EU: indicate disassoc
[23949.588578] r8188eu 1-8:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[23956.324106] r8188eu 1-8:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[23958.174657] R8188EU: assoc success
[23959.000499] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24022.002220] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24085.006814] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24122.123478] scsi_io_completion_action: 20 callbacks suppressed
[24122.123482] sd 7:0:0:0: [sdc] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[24122.123485] sd 7:0:0:0: [sdc] tag#8 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[24122.123580] sd 6:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[24122.123581] sd 6:0:0:0: [sdb] tag#15 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[24122.123626] sd 8:0:0:0: [sdd] tag#19 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[24122.123627] sd 8:0:0:0: [sdd] tag#19 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[24148.006074] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24211.005614] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24234.027324] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[24274.008954] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24337.011614] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24400.005843] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24463.009866] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24526.002797] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24549.020770] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[24589.008116] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24652.002847] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24715.004707] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24722.138040] sd 7:0:0:0: [sdc] tag#10 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[24722.138043] sd 7:0:0:0: [sdc] tag#10 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[24722.138130] sd 6:0:0:0: [sdb] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[24722.138131] sd 6:0:0:0: [sdb] tag#17 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[24722.138185] sd 8:0:0:0: [sdd] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[24722.138186] sd 8:0:0:0: [sdd] tag#21 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[24778.001532] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24841.004662] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24864.020253] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[24904.000347] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[24967.002989] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25029.997805] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25093.002186] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25155.997206] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25179.013807] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[25219.001393] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25281.997752] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25322.095665] sd 7:0:0:0: [sdc] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[25322.095668] sd 7:0:0:0: [sdc] tag#11 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[25322.095756] sd 6:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[25322.095757] sd 6:0:0:0: [sdb] tag#3 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[25322.095801] sd 8:0:0:0: [sdd] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[25322.095803] sd 8:0:0:0: [sdd] tag#20 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[25344.998057] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25407.998472] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25471.002799] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25494.020627] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[25533.998816] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25597.003631] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25659.999782] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25723.004197] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25786.000200] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25809.016330] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[25849.006185] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25912.001145] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[25922.112730] sd 7:0:0:0: [sdc] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[25922.112733] sd 7:0:0:0: [sdc] tag#7 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[25922.112818] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[25922.112819] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[25922.112863] sd 8:0:0:0: [sdd] tag#29 FAILED Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[25922.112864] sd 8:0:0:0: [sdd] tag#29 CDB: ATA command pass through(16) 85 06
20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[25975.005526] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[26038.002581] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[26101.006737] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
[26124.022863] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[26164.003256] r8188eu 1-6:1.0: firmware: direct-loading firmware
rtlwifi/rtl8188eufw.bin
** Model information
sys_vendor: Acer
product_name: Aspire TC-605
product_version:
chassis_vendor: Acer
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: P11-B4
board_vendor: Acer
board_name: Aspire TC-605
board_version:
** Loaded modules:
xt_conntrack
ipt_MASQUERADE
nf_conntrack_netlink
xfrm_user
xfrm_algo
nft_counter
xt_addrtype
nft_compat
nft_chain_nat_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nf_tables
nfnetlink
br_netfilter
bridge
stp
llc
isofs
udf
crc_itu_t
rfcomm
fuse
pci_stub
vboxpci(OE)
vboxnetadp(OE)
vboxnetflt(OE)
aufs(OE)
vboxdrv(OE)
overlay
bnep
nls_ascii
nls_cp437
vfat
fat
dm_multipath
scsi_dh_rdac
scsi_dh_emc
scsi_dh_alua
ath3k
btusb
btrtl
btbcm
btintel
joydev
bluetooth
arc4
uvcvideo
videobuf2_vmalloc
videobuf2_memops
intel_rapl
ath9k
snd_usb_audio
videobuf2_v4l2
r8188eu(C)
videobuf2_common
ath9k_common
ath9k_hw
videodev
snd_usbmidi_lib
drbg
lib80211
ansi_cprng
snd_rawmidi
ath
media
snd_seq_device
mac80211
ecdh_generic
x86_pkg_temp_thermal
snd_hda_codec_hdmi
intel_powerclamp
coretemp
snd_hda_codec_realtek
kvm_intel
snd_hda_codec_generic
kvm
snd_hda_intel
cfg80211
snd_hda_codec
irqbypass
efi_pstore
intel_cstate
intel_uncore
snd_hda_core
intel_rapl_perf
snd_hwdep
efivars
rfkill
intel_pch_thermal
iTCO_wdt
snd_pcm
wmi_bmof
pcspkr
iTCO_vendor_support
mei_me
snd_timer
mei
snd
sg
soundcore
pcc_cpufreq
evdev
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
algif_skcipher
af_alg
ses
enclosure
scsi_transport_sas
hid_generic
usbhid
hid
uas
usb_storage
dm_crypt
dm_mod
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid0
multipath
linear
raid1
md_mod
sr_mod
cdrom
sd_mod
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
pcbc
i915
i2c_algo_bit
aesni_intel
drm_kms_helper
aes_x86_64
crypto_simd
cryptd
glue_helper
i2c_i801
ahci
lpc_ich
r8169
ehci_pci
xhci_pci
libahci
ehci_hcd
xhci_hcd
libata
realtek
drm
libphy
usbcore
scsi_mod
usb_common
fan
thermal
wmi
button
video
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM
Controller [8086:0c00] (rev 06)
Subsystem: Acer Incorporated [ALI] 4th Gen Core Processor DRAM
Controller [1025:0750]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7e00000-f7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th
Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if
00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Xeon E3-1200 v3/4th Gen Core
Processor Integrated Graphics Controller [1025:0750]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 34
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Acer Incorporated [ALI] Xeon E3-1200 v3/4th Gen Core
Processor HD Audio Controller [1025:0750]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at f7f14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: Acer Incorporated [ALI] 8 Series/C220 Series Chipset Family
USB xHCI [1025:0750]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f7f00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series
Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Acer Incorporated [ALI] 8 Series/C220 Series Chipset Family
MEI Controller [1025:0750]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 36
Region 0: Memory at f7f1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] 8 Series/C220 Series Chipset Family
USB EHCI [1025:0750]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset
High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: Acer Incorporated [ALI] 8 Series/C220 Series Chipset High
Definition Audio Controller [1025:0750]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at f7f10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df200000-df3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 28
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7d00000-f7dfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #4 [8086:8c16] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 29
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] 8 Series/C220 Series Chipset Family
USB EHCI [1025:0750]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7f1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation C220 Series Chipset Family H81
Express LPC Controller [8086:8c5c] (rev 05)
Subsystem: Acer Incorporated [ALI] H81 Express LPC Controller
[1025:0750]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset
Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01
[AHCI 1.0])
Subsystem: Acer Incorporated [ALI] 8 Series/C220 Series Chipset Family
6-port SATA Controller 1 [AHCI mode] [1025:0750]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7f1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family
SMBus Controller [8086:8c22] (rev 05)
Subsystem: Acer Incorporated [ALI] 8 Series/C220 Series Chipset Family
SMBus Controller [1025:0750]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7f19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Chipset
Family Thermal Management Controller [8086:8c24] (rev 05)
Subsystem: Acer Incorporated [ALI] 8 Series Chipset Family Thermal
Management Controller [1025:0750]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7f18000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe
SATA 6Gb/s Controller [1b4b:9230] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s
Controller [1b4b:9230]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: I/O ports at e050 [size=8]
Region 1: I/O ports at e040 [size=4]
Region 2: I/O ports at e030 [size=8]
Region 3: I/O ports at e020 [size=4]
Region 4: I/O ports at e000 [size=32]
Region 5: Memory at f7e10000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at f7e00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 11)
Subsystem: Acer Incorporated [ALI] RTL8111/8168/8411 PCI Express
Gigabit Ethernet Controller [1025:0750]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f7d00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network
Adapter [168c:0034] (rev 01)
Subsystem: Lite-On Communications Inc AR9462 Wireless Network Adapter
[11ad:6621]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at f7c80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
** USB devices:
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:8008 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 008: ID 056e:4008 Elecom Co., Ltd
Bus 001 Device 006: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n
Wireless Network Adapter
Bus 001 Device 004: ID 1058:1140 Western Digital Technologies, Inc. My Book
Essential (WDBACW)
Bus 001 Device 007: ID 045e:07a5 Microsoft Corp. Wireless Receiver 1461C
Bus 001 Device 005: ID 045e:07a5 Microsoft Corp. Wireless Receiver 1461C
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 009: ID 04ca:3006 Lite-On Technology Corp.
Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-6-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_CRAP, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-6-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-6-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-6-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-6-amd64 is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20190114-2
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20190114-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20190114-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
