Package: src:linux
Version: 4.19.67-2+deb10u1
Severity: minor
Dear Maintainer,
My computer dmesg has the following error info:
[ 4.386098] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU
pipe A FIFO underrun
[ 4.386184] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* pipe
B underrun
[ 4.386260] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU
pipe B FIFO underrun
Is this kernel drm module bug?
-- Package-specific info:
** Version:
Linux version 4.19.0-6-686 (debian-ker...@lists.debian.org) (gcc version 8.3.0
(Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-686
root=UUID=c7f87b55-601d-4fe6-af32-3ea18d2c7e7b ro quiet
** Not tainted
** Kernel log:
[ 0.000000] Linux version 4.19.0-6-686 (debian-ker...@lists.debian.org) (gcc
version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f6dffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f6e0000-0x000000001f6ebfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001f6ec000-0x000000001f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffffc00-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Sony Corporation VGN-B99C, BIOS R0042G9 01/19/2005
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x1f6e0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x09ffffff]
[ 0.000000] BRK [0x09a9f000, 0x09a9ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1c7a5000-0x1e9cbfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F69B0 000014 (v00 SONY )
[ 0.000000] ACPI: RSDT 0x000000001F6E79DF 000030 (v01 SONY G9
20050119 PTL 00000000)
[ 0.000000] ACPI: FACP 0x000000001F6EBEC2 000084 (v02 SONY G9
20050119 PTL 00000050)
[ 0.000000] ACPI: DSDT 0x000000001F6E7E7B 004047 (v01 SONY G9
20050119 PTL 0100000E)
[ 0.000000] ACPI: FACS 0x000000001F6FCFC0 000040
[ 0.000000] ACPI: BOOT 0x000000001F6EBFD8 000028 (v01 SONY G9
20050119 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000001F6E7A0F 0002D8 (v01 SONY G9
20050119 PTL 00000000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f6e0000
[ 0.000000] low ram: 0 - 1f6e0000
[ 0.000000] BRK [0x09aa0000, 0x09aa0fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001f6dffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001f6dffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001f6dffff]
[ 0.000000] On node 0 totalpages: 128638
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1218 pages used for memmap
[ 0.000000] Normal zone: 124640 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at [mem 0x1f700000-0x1fefffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d8000-0x000fffff]
[ 0.000000] [mem 0x20000000-0xfec0ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x474
with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] percpu: Embedded 29 pages/cpu s87884 r0 d30900 u118784
[ 0.000000] pcpu-alloc: s87884 r0 d30900 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 127380
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-686
root=UUID=c7f87b55-601d-4fe6-af32-3ea18d2c7e7b ro quiet
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] BRK [0x09aa1000, 0x09aa1fff] PGTABLE
[ 0.000000] microcode: microcode updated early to revision 0x18, date =
2004-10-17
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 463056K/514552K available (6629K kernel code, 639K
rwdata, 2076K rodata, 840K init, 436K bss, 51496K reserved, 0K cma-reserved, 0K
highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
cpu_entry : 0xff400000 - 0xff8e1000 (4996 kB)
pkmap : 0xfec00000 - 0xff000000 (4096 kB)
vmalloc : 0xdfee0000 - 0xfebfe000 ( 493 MB)
lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB)
.init : 0xc9931000 - 0xc9a03000 ( 840 kB)
.data : 0xc96797e0 - 0xc9921e80 (2721 kB)
.text : 0xc9000000 - 0xc96797e0 (6629 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 29294 entries in 58 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180810
[ 0.000000] APIC: Keep in PIC mode(8259)
[ 0.004000] tsc: PIT calibration matches PMTIMER. 1 loops
[ 0.004000] tsc: Detected 1587.982 MHz processor
[ 0.000018] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
0x16e3cc15cab, max_idle_ns: 440795275611 ns
[ 0.000034] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3175.96 BogoMIPS (lpj=6351928)
[ 0.000038] pid_max: default: 32768 minimum: 301
[ 0.000111] Security Framework initialized
[ 0.000113] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000157] AppArmor: AppArmor initialized
[ 0.000187] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000193] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000615] Disabled fast string operations
[ 0.000654] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.000655] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.000658] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user
pointer sanitization
[ 0.000661] Spectre V2 : Mitigation: Full generic retpoline
[ 0.000663] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on
context switch
[ 0.000664] Speculative Store Bypass: Vulnerable
[ 0.000666] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[ 0.000690] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.008195] Freeing SMP alternatives memory: 24K
[ 0.012173] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.012175] smpboot: SMP disabled
[ 0.012380] Performance Events:
[ 0.012383] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.012384] no hardware sampling interrupt available.
[ 0.012387] p6 PMU driver.
[ 0.012390] ... version: 0
[ 0.012391] ... bit width: 32
[ 0.012392] ... generic registers: 2
[ 0.012394] ... value mask: 00000000ffffffff
[ 0.012395] ... max period: 000000007fffffff
[ 0.012396] ... fixed-purpose events: 0
[ 0.012397] ... event mask: 0000000000000003
[ 0.012469] rcu: Hierarchical SRCU implementation.
[ 0.013358] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.013410] smp: Bringing up secondary CPUs ...
[ 0.013412] smp: Brought up 1 node, 1 CPU
[ 0.013414] smpboot: Max logical packages: 1
[ 0.013416] smpboot: Total of 1 processors activated (3175.96 BogoMIPS)
[ 0.013668] devtmpfs: initialized
[ 0.014054] PM: Registering ACPI NVS region [mem 0x1f6ec000-0x1f6fffff]
(81920 bytes)
[ 0.014159] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.014165] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.014253] pinctrl core: initialized pinctrl subsystem
[ 0.014620] NET: Registered protocol family 16
[ 0.014810] audit: initializing netlink subsys (disabled)
[ 0.015044] cpuidle: using governor ladder
[ 0.015046] cpuidle: using governor menu
[ 0.015105] Simple Boot Flag at 0x36 set to 0x1
[ 0.015114] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1601818034827 ns
[ 0.015142] ACPI: bus type PCI registered
[ 0.015145] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.018970] PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2
[ 0.018971] PCI: Using configuration type 1 for base access
[ 0.020609] audit: type=2000 audit(1569469670.016:1): state=initialized
audit_enabled=0 res=1
[ 0.020777] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.021149] ACPI: Added _OSI(Module Device)
[ 0.021150] ACPI: Added _OSI(Processor Device)
[ 0.021152] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.021154] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.021156] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.021158] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.024468] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.026845] ACPI: EC: EC started
[ 0.026846] ACPI: EC: interrupt blocked
[ 0.026929] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.026932] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66,
EC_DATA=0x62
[ 0.026934] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle
transactions
[ 0.026935] ACPI: Interpreter enabled
[ 0.026975] ACPI: (supports S0 S3 S4 S5)
[ 0.026976] ACPI: Using PIC for interrupt routing
[ 0.027003] PCI: Ignoring host bridge windows from ACPI; if necessary, use
"pci=use_crs" and report a bug
[ 0.027213] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.033718] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.033727] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.033734] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.033741] acpi PNP0A03:00: fail to add MMCONFIG information, can't access
extended PCI configuration space under this bridge.
[ 0.034206] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window]
(ignored)
[ 0.034209] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.034211] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window]
(ignored)
[ 0.034214] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff
window] (ignored)
[ 0.034216] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff
window] (ignored)
[ 0.034218] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff
window] (ignored)
[ 0.034221] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff
window] (ignored)
[ 0.034223] PCI: root bus 00: using default resources
[ 0.034415] PCI host bridge to bus 0000:00
[ 0.034419] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.034421] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.034425] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.034441] pci 0000:00:00.0: [8086:3580] type 00 class 0x060000
[ 0.034589] pci 0000:00:00.1: [8086:3584] type 00 class 0x088000
[ 0.034720] pci 0000:00:00.3: [8086:3585] type 00 class 0x088000
[ 0.034852] pci 0000:00:02.0: [8086:3582] type 00 class 0x030000
[ 0.034866] pci 0000:00:02.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ 0.034872] pci 0000:00:02.0: reg 0x14: [mem 0xe0000000-0xe007ffff]
[ 0.034878] pci 0000:00:02.0: reg 0x18: [io 0x1800-0x1807]
[ 0.034912] pci 0000:00:02.0: supports D1
[ 0.035010] pci 0000:00:02.1: [8086:3582] type 00 class 0x038000
[ 0.035022] pci 0000:00:02.1: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.035028] pci 0000:00:02.1: reg 0x14: [mem 0xe0080000-0xe00fffff]
[ 0.035065] pci 0000:00:02.1: supports D1
[ 0.035188] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[ 0.035233] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.035361] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[ 0.035406] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.035546] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[ 0.035569] pci 0000:00:1d.7: reg 0x10: [mem 0xe0100000-0xe01003ff]
[ 0.035655] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.035772] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[ 0.035919] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100
[ 0.035986] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4
ACPI/GPIO/TCO
[ 0.035991] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.036108] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a
[ 0.036126] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.036136] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.036145] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.036154] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.036163] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
[ 0.036173] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[ 0.036185] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.036188] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.036190] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.036192] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.036302] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[ 0.036347] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.036473] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
[ 0.036490] pci 0000:00:1f.5: reg 0x10: [io 0x1c00-0x1cff]
[ 0.036499] pci 0000:00:1f.5: reg 0x14: [io 0x18c0-0x18ff]
[ 0.036507] pci 0000:00:1f.5: reg 0x18: [mem 0xe0100c00-0xe0100dff]
[ 0.036516] pci 0000:00:1f.5: reg 0x1c: [mem 0xe0100800-0xe01008ff]
[ 0.036560] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.036667] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300
[ 0.036684] pci 0000:00:1f.6: reg 0x10: [io 0x2400-0x24ff]
[ 0.036693] pci 0000:00:1f.6: reg 0x14: [io 0x2000-0x207f]
[ 0.036749] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.036865] pci_bus 0000:02: extended config space not accessible
[ 0.036969] pci 0000:02:04.0: [104c:ac8e] type 02 class 0x060700
[ 0.036985] pci 0000:02:04.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.037015] pci 0000:02:04.0: supports D1 D2
[ 0.037017] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.037116] pci 0000:02:04.2: [104c:802e] type 00 class 0x0c0010
[ 0.037132] pci 0000:02:04.2: reg 0x10: [mem 0xe0207000-0xe02077ff]
[ 0.037141] pci 0000:02:04.2: reg 0x14: [mem 0xe0200000-0xe0203fff]
[ 0.037204] pci 0000:02:04.2: supports D1 D2
[ 0.037206] pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.037304] pci 0000:02:04.3: [104c:ac8f] type 00 class 0x018000
[ 0.037319] pci 0000:02:04.3: reg 0x10: [mem 0xe0204000-0xe0204fff]
[ 0.037386] pci 0000:02:04.3: supports D1 D2
[ 0.037388] pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.037490] pci 0000:02:08.0: [8086:103d] type 00 class 0x020000
[ 0.037505] pci 0000:02:08.0: reg 0x10: [mem 0xe0205000-0xe0205fff]
[ 0.037514] pci 0000:02:08.0: reg 0x14: [io 0x3000-0x303f]
[ 0.037572] pci 0000:02:08.0: supports D1 D2
[ 0.037574] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.037666] pci 0000:02:0b.0: [8086:4220] type 00 class 0x028000
[ 0.037682] pci 0000:02:0b.0: reg 0x10: [mem 0xe0206000-0xe0206fff]
[ 0.037751] pci 0000:02:0b.0: PME# supported from D0 D3hot D3cold
[ 0.037856] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.037861] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.037865] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe02fffff]
[ 0.037870] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff]
(subtractive decode)
[ 0.037873] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff]
(subtractive decode)
[ 0.037876] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]),
reconfiguring
[ 0.037897] pci_bus 0000:03: extended config space not accessible
[ 0.037931] pci_bus 0000:03: busn_res: can not insert [bus 03-02] under [bus
02] (conflicts with (null) [bus 02])
[ 0.037936] pci_bus 0000:03: busn_res: [bus 03-02] end is updated to 06
[ 0.037939] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus
02] (conflicts with (null) [bus 02])
[ 0.037943] pci 0000:02:04.0: devices behind bridge are unusable because
[bus 03-06] cannot be assigned for them
[ 0.037947] pci 0000:00:1e.0: bridge has subordinate 02 but max busn 06
[ 0.037955] pci_bus 0000:00: on NUMA node 0
[ 0.038103] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 0.038195] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
[ 0.038286] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
[ 0.038377] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[ 0.038467] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[ 0.038557] ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled.
[ 0.038647] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[ 0.038738] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled.
[ 0.040205] ACPI: EC: interrupt unblocked
[ 0.040214] ACPI: EC: event unblocked
[ 0.040220] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66,
EC_DATA=0x62
[ 0.040223] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle
transactions and events
[ 0.040351] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.040355] pci 0000:00:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.040362] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.040363] vgaarb: loaded
[ 0.040474] EDAC MC: Ver: 3.0.0
[ 0.040705] PCI: Using ACPI for IRQ routing
[ 0.040735] PCI: pci_cache_line_size set to 64 bytes
[ 0.040781] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.040783] e820: reserve RAM buffer [mem 0x1f6e0000-0x1fffffff]
[ 0.043457] clocksource: Switched to clocksource tsc-early
[ 0.065506] VFS: Disk quotas dquot_6.6.0
[ 0.065549] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.065800] AppArmor: AppArmor Filesystem Enabled
[ 0.065847] pnp: PnP ACPI init
[ 0.066301] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.066437] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.066441] system 00:01: [io 0x0700-0x070f] has been reserved
[ 0.066444] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.066446] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.066449] system 00:01: [io 0xfe00-0xfe01] has been reserved
[ 0.066452] system 00:01: [io 0xfe10-0xfe17] has been reserved
[ 0.066456] system 00:01: [mem 0xfebfe000-0xfebfefff] has been reserved
[ 0.066459] system 00:01: [mem 0xfebff000-0xfebfffff] has been reserved
[ 0.066462] system 00:01: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.066471] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.066909] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.066956] pnp 00:03: Plug and Play ACPI device, IDs SNY9001 PNP0f13
(active)
[ 0.066988] pnp: PnP ACPI: found 4 devices
[ 0.066992] PnPBIOS: Disabled
[ 0.104429] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.104464] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x07ffffff pref]
to [bus 02] add_size 4000000 add_align 4000000
[ 0.104480] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x27ffffff
pref]
[ 0.104484] pci 0000:00:1f.1: BAR 5: assigned [mem 0x28000000-0x280003ff]
[ 0.104496] pci 0000:02:04.0: BAR 0: assigned [mem 0x2c000000-0x2c000fff]
[ 0.104501] pci 0000:02:04.0: BAR 15: assigned [mem 0x20000000-0x23ffffff
pref]
[ 0.104505] pci 0000:02:04.0: BAR 16: assigned [mem 0x30000000-0x33ffffff]
[ 0.104508] pci 0000:02:04.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.104511] pci 0000:02:04.0: BAR 14: assigned [io 0x3800-0x38ff]
[ 0.104514] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[ 0.104517] pci 0000:02:04.0: bridge window [io 0x3400-0x34ff]
[ 0.104521] pci 0000:02:04.0: bridge window [io 0x3800-0x38ff]
[ 0.104525] pci 0000:02:04.0: bridge window [mem 0x20000000-0x23ffffff
pref]
[ 0.104530] pci 0000:02:04.0: bridge window [mem 0x30000000-0x33ffffff]
[ 0.104534] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.104538] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.104544] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe02fffff]
[ 0.104548] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x27ffffff
pref]
[ 0.104556] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.104558] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.104561] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.104563] pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe02fffff]
[ 0.104566] pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
[ 0.104568] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.104571] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.104573] pci_bus 0000:03: resource 0 [io 0x3400-0x34ff]
[ 0.104576] pci_bus 0000:03: resource 1 [io 0x3800-0x38ff]
[ 0.104578] pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.104581] pci_bus 0000:03: resource 3 [mem 0x30000000-0x33ffffff]
[ 0.104716] NET: Registered protocol family 2
[ 0.105013] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144
bytes)
[ 0.105024] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.105043] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.105077] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.105133] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.105145] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.105217] NET: Registered protocol family 1
[ 0.105227] NET: Registered protocol family 44
[ 0.105252] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.105523] PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 0.105526] PCI: setting IRQ 9 as level-triggered
[ 0.105819] PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.106107] PCI Interrupt Link [LNKH] enabled at IRQ 9
[ 0.106257] pci 0000:02:08.0: Firmware left e100 interrupts enabled;
disabling
[ 0.106266] PCI: CLS 64 bytes, default 64
[ 0.106353] Unpacking initramfs...
[ 1.000699] random: fast init done
[ 1.300478] Freeing initrd memory: 34972K
[ 1.301836] Initialise system trusted keyrings
[ 1.301858] Key type blacklist registered
[ 1.301983] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 1.304903] zbud: loaded
[ 2.332099] tsc: Refined TSC clocksource calibration: 1588.016 MHz
[ 2.332108] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x16e3ec10993, max_idle_ns: 440795202970 ns
[ 2.332128] clocksource: Switched to clocksource tsc
[ 2.770529] Key type asymmetric registered
[ 2.770534] Asymmetric key parser 'x509' registered
[ 2.770570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
249)
[ 2.770636] io scheduler noop registered
[ 2.770638] io scheduler deadline registered
[ 2.770758] io scheduler cfq registered (default)
[ 2.770760] io scheduler mq-deadline registered
[ 2.771188] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.771217] intel_idle: does not run on family 6 model 13
[ 2.771467] tsc: Marking TSC unstable due to TSC halts in idle
[ 2.771783] clocksource: Switched to clocksource acpi_pm
[ 2.771829] isapnp: Scanning for PnP cards...
[ 3.125828] isapnp: No Plug & Play device found
[ 3.125980] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.126844] PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 3.127082] Linux agpgart interface v0.103
[ 3.127216] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 3.147212] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x0
[ 3.147446] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 3.149754] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.149764] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.149957] mousedev: PS/2 mouse device common for all mice
[ 3.150028] rtc_cmos 00:00: RTC can wake from S4
[ 3.150159] rtc_cmos 00:00: registered as rtc0
[ 3.150192] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 3.150234] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.150896] NET: Registered protocol family 10
[ 3.163116] Segment Routing with IPv6
[ 3.163160] mip6: Mobile IPv6
[ 3.163164] NET: Registered protocol family 17
[ 3.163216] mpls_gso: MPLS GSO support
[ 3.163363] mce: Using 5 MCE banks
[ 3.163429] microcode: sig=0x6d6, pf=0x20, revision=0x18
[ 3.163491] microcode: Microcode Update Driver: v2.2.
[ 3.163495] Using IPI No-Shortcut mode
[ 3.163688] registered taskstats version 1
[ 3.163690] Loading compiled-in X.509 certificates
[ 3.180439] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 3.497048] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 3.497080] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 3.497112] zswap: loaded using pool lzo/zbud
[ 3.497179] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.497588] rtc_cmos 00:00: setting system clock to 2019-09-26 03:47:53 UTC
(1569469673)
[ 3.497637] Unstable clock detected, switching default tracing clock to
"global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 3.499704] Freeing unused kernel image memory: 840K
[ 3.508140] Write protecting the kernel text: 6632k
[ 3.508207] Write protecting the kernel read-only data: 2080k
[ 3.508209] Run /init as init process
[ 3.672286] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 3.672505] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2
[ 3.756301] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 3.756320] ACPI: Lid Switch [LID0]
[ 3.756414] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 3.756439] ACPI: Power Button [PWRB]
[ 3.757912] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.757914] ACPI: Thermal Zone [ATF0] (65 C)
[ 3.776764] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 3.776767] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.777110] PCI Interrupt Link [LNKE] enabled at IRQ 9
[ 3.856213] i801_smbus 0000:00:1f.3: SMBus using polling
[ 3.857725] PCI Interrupt Link [LNKG] enabled at IRQ 9
[ 3.875907] ACPI: bus type USB registered
[ 3.875953] usbcore: registered new interface driver usbfs
[ 3.875969] usbcore: registered new interface driver hub
[ 3.882005] usbcore: registered new device driver usb
[ 3.891027] SCSI subsystem initialized
[ 3.916329] firewire_ohci 0000:02:04.2: added OHCI v1.10 device as card 0, 4
IR + 8 IT contexts, quirks 0x2
[ 3.923094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.940955] ehci-pci: EHCI PCI platform driver
[ 3.941176] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.941187] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 3.941203] ehci-pci 0000:00:1d.7: debug port 1
[ 3.945126] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 3.976408] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.976643] ehci-pci 0000:00:1d.7: irq 9, io mem 0xe0100000
[ 3.992068] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.992227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.19
[ 3.992230] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.992232] usb usb1: Product: EHCI Host Controller
[ 3.992234] usb usb1: Manufacturer: Linux 4.19.0-6-686 ehci_hcd
[ 3.992236] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.992446] hub 1-0:1.0: USB hub found
[ 3.992459] hub 1-0:1.0: 6 ports detected
[ 3.992910] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.992924] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 3.992931] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.992954] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001820
[ 3.993103] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.19
[ 3.993105] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.993107] usb usb2: Product: UHCI Host Controller
[ 3.993110] usb usb2: Manufacturer: Linux 4.19.0-6-686 uhci_hcd
[ 3.993112] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.993279] hub 2-0:1.0: USB hub found
[ 3.993291] hub 2-0:1.0: 2 ports detected
[ 3.993614] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.993621] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 3.993627] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.993645] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001840
[ 3.993727] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.19
[ 3.993730] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.993732] usb usb3: Product: UHCI Host Controller
[ 3.993734] usb usb3: Manufacturer: Linux 4.19.0-6-686 uhci_hcd
[ 3.993736] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.993905] hub 3-0:1.0: USB hub found
[ 3.993917] hub 3-0:1.0: 2 ports detected
[ 4.000723] e100 0000:02:08.0 eth0: addr 0xe0205000, irq 9, MAC addr
00:01:4a:07:5a:9a
[ 4.034803] libata version 3.00 loaded.
[ 4.057413] ata_piix 0000:00:1f.1: version 2.13
[ 4.057427] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 4.057560] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
[ 4.079728] scsi host0: ata_piix
[ 4.088919] scsi host1: ata_piix
[ 4.089077] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 4.089080] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 4.184153] e100 0000:02:08.0 enp2s8: renamed from eth0
[ 4.274258] ata1.00: ATA-6: FUJITSU MHT2040AT, 0022, max UDMA/100
[ 4.274263] ata1.00: 78140160 sectors, multi 16: LBA
[ 4.282959] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2040A 0022
PQ: 0 ANSI: 5
[ 4.296252] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 4.296262] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total,
131072K mappable
[ 4.297184] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 4.297223] [drm] Replacing VGA console driver
[ 4.298556] Console: switching to colour dummy device 80x25
[ 4.299282] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.299284] [drm] Driver supports precise vblank timestamp query.
[ 4.300929] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.386098] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU
pipe A FIFO underrun
[ 4.386184] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* pipe
B underrun
[ 4.386260] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU
pipe B FIFO underrun
[ 4.402306] [drm] RC6 disabled, disabling runtime PM support
[ 4.402611] [drm] Initialized overlay support.
[ 4.402657] [drm] PMU not supported for this GPU.
[ 4.404195] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 4.410080] ata2.00: ATAPI: TOSHIBA ODD-DVD SD-C2732, 1550, max UDMA/33
[ 4.433461] scsi 1:0:0:0: CD-ROM TOSHIBA ODD-DVD SD-C2732 1550
PQ: 0 ANSI: 5
[ 4.452517] firewire_core 0000:02:04.2: created device fw0: GUID
0800460301ca94f8, S400
[ 4.482355] fbcon: inteldrmfb (fb0) is primary device
[ 4.544058] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 4.739895] usb 2-1: New USB device found, idVendor=046d, idProduct=c016,
bcdDevice= 3.40
[ 4.739898] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.739900] usb 2-1: Product: Optical USB Mouse
[ 4.739902] usb 2-1: Manufacturer: Logitech
[ 4.754802] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.776298] usbcore: registered new interface driver usbhid
[ 4.776300] usbhid: USB HID core driver
[ 4.782507] input: Logitech Optical USB Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C016.0001/input/input6
[ 4.782946] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1/input0
[ 4.981889] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input5
[ 4.986880] Console: switching to colour frame buffer device 128x48
[ 5.008826] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.035445] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0
GB/37.3 GiB)
[ 5.035461] sd 0:0:0:0: [sda] Write Protect is off
[ 5.035464] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.035483] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.066486] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda
tray
[ 5.066488] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.067241] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.134922] sda: sda1 sda2 < sda5 sda6 >
[ 5.135540] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.327238] PM: Image not found (code -22)
[ 6.710892] cryptd: max_cpu_qlen set to 1000
[ 6.852556] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.019119] random: crng init done
[ 9.373064] systemd[1]: Inserted module 'autofs4'
[ 9.670227] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2
default-hierarchy=hybrid)
[ 9.670391] systemd[1]: Detected architecture x86.
[ 9.686843] systemd[1]: Set hostname to <sony>.
[ 9.703569] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid
argument
[ 12.516584] systemd[1]: Listening on Journal Audit Socket.
[ 12.517910] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 12.517949] systemd[1]: Reached target Remote File Systems.
[ 12.518143] systemd[1]: Listening on udev Control Socket.
[ 12.518269] systemd[1]: Listening on udev Kernel Socket.
[ 12.518646] systemd[1]: Created slice system-getty.slice.
[ 13.414371] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.700320] systemd-journald[180]: Received request to flush runtime journal
from PID 1
[ 15.778659] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 15.807609] ACPI: AC Adapter [ACAD] (on-line)
[ 16.303522] sony_laptop: detected Type2 model
[ 16.308424] input: Sony Vaio Keys as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0c/SNY6001:00/input/input7
[ 16.308563] input: Sony Vaio Jogdial as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0c/SNY6001:00/input/input8
[ 16.308700] sony_laptop: device allocated minor is 57
[ 16.324284] sony_laptop: SPIC setup done.
[ 16.324687] sony_laptop: SNC setup done.
[ 16.371230] intel_rng: FWH not detected
[ 16.460081] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.460151] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 16.844221] PCI Interrupt Link [LNKF] enabled at IRQ 5
[ 16.844226] PCI: setting IRQ 5 as level-triggered
[ 16.864133] iTCO_vendor_support: vendor-support=0
[ 16.872061] tifm_core: MMC/SD card detected in socket 0:0
[ 16.919954] yenta_cardbus 0000:02:04.0: CardBus bridge found [104d:818f]
[ 16.919971] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts
to PCI
[ 16.919973] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 16.919977] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01001b22, devctl 0x64
[ 17.108286] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 17.136784] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 17.136847] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by
hardware/BIOS
[ 17.160608] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c98, PCI irq 9
[ 17.160613] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 17.160617] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02)
from #02 to #06
[ 17.160632] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window:
[io 0x3000-0x3fff]
[ 17.160636] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[ 17.161853] excluding 0x3000-0x303f 0x3400-0x34ff 0x3800-0x38ff
[ 17.176821] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window:
[mem 0xe0200000-0xe02fffff]
[ 17.176827] pcmcia_socket pcmcia_socket0: cs: memory probe
0xe0200000-0xe02fffff:
[ 17.176830] excluding 0xe0200000-0xe020ffff
[ 17.176843] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window:
[mem 0x20000000-0x27ffffff pref]
[ 17.176846] pcmcia_socket pcmcia_socket0: cs: memory probe
0x20000000-0x27ffffff:
[ 17.176853] excluding 0x20000000-0x27ffffff
[ 17.765075] lib80211: common routines for IEEE802.11 drivers
[ 17.765079] lib80211_crypt: registered algorithm 'NULL'
[ 17.769321] snd_intel8x0m 0000:00:1f.6: MC'97 1 converters and GPIO not
ready (0xff00)
[ 17.845005] libipw: 802.11 data/management/control stack, git-1.1.13
[ 17.845008] libipw: Copyright (C) 2004-2005 Intel Corporation
<jketr...@linux.intel.com>
[ 18.120153] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,
1.2.2kmprq
[ 18.120156] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 18.120514] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 18.271039] ipw2200 0000:02:0b.0: firmware: direct-loading firmware
ipw2200-bss.fw
[ 18.395676] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a
channels)
[ 18.664093] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured
59384 usecs (2860 samples)
[ 18.664102] snd_intel8x0 0000:00:1f.5: clocking to 48000
[ 19.438784] ipw2200 0000:02:0b.0 wlp2s11: renamed from eth0
[ 19.835580] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 19.836694] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 19.837539] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 19.837938] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 19.838364] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 19.838982] clean
[ 19.839045] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 19.839728] clean
[ 19.839802] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 19.839813] excluding 0xc0000-0xc7fff 0xd8000-0xfffff
[ 19.839909] pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa0ffffff:
[ 19.839953] clean
[ 19.840015] pcmcia_socket pcmcia_socket0: cs: memory probe
0x60000000-0x60ffffff:
[ 19.848094] clean
[ 19.848144] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 19.848793] clean
[ 21.704176] Adding 513020k swap on /dev/sda5. Priority:-2 extents:1
across:513020k FS
[ 24.151135] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
(null)
[ 24.467644] loop: module loaded
[ 24.617877] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 24.617996] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 24.745666] ISO 9660 Extensions: RRIP_1991A
[ 26.012028] audit: type=1400 audit(1569469696.007:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oopslash"
pid=349 comm="apparmor_parser"
[ 26.035295] audit: type=1400 audit(1569469696.031:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=350 comm="apparmor_parser"
[ 26.170539] audit: type=1400 audit(1569469696.167:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice"
pid=351 comm="apparmor_parser"
[ 26.170547] audit: type=1400 audit(1569469696.167:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg"
pid=351 comm="apparmor_parser"
[ 26.211822] audit: type=1400 audit(1569469696.207:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=352
comm="apparmor_parser"
[ 26.211840] audit: type=1400 audit(1569469696.207:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=352
comm="apparmor_parser"
[ 26.211850] audit: type=1400 audit(1569469696.207:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=352
comm="apparmor_parser"
[ 26.252800] audit: type=1400 audit(1569469696.251:9): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/i386-linux-gnu/lightdm/lightdm-guest-session" pid=353
comm="apparmor_parser"
[ 26.252807] audit: type=1400 audit(1569469696.251:10): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/i386-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=353
comm="apparmor_parser"
[ 26.286049] audit: type=1400 audit(1569469696.283:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=354 comm="apparmor_parser"
[ 32.025826] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 36.569129] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 36.569950] wlp2s11: Setting MAC to ca:68:9c:97:11:57
[ 36.681705] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 36.901842] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 37.422595] wlp2s11: Setting MAC to 00:12:f0:52:6e:f2
[ 37.535425] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 39.029831] lib80211_crypt: registered algorithm 'CCMP'
[ 39.030531] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s11: link becomes ready
[ 1674.868460] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1674.868510] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1674.868602] ISO 9660 Extensions: RRIP_1991A
[ 2719.084581] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 2719.105786] wlp2s11: Setting MAC to ae:e4:09:cb:3f:34
[ 2719.236927] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 2720.200371] wlp2s11: Setting MAC to 00:12:f0:52:6e:f2
[ 2720.222589] ipw2200: Firmware error detected. Restarting.
[ 2720.334647] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 2796.015795] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 2796.028775] wlp2s11: Setting MAC to 96:de:20:a6:3e:76
[ 2796.157665] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 3114.013513] wlp2s11: Setting MAC to fa:53:8e:a7:dc:5c
[ 3114.153029] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 3430.009070] wlp2s11: Setting MAC to e2:c6:01:38:5a:35
[ 3430.136984] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 3745.001197] wlp2s11: Setting MAC to 6a:1a:b2:90:14:6c
[ 3745.130730] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 4060.057098] wlp2s11: Setting MAC to 56:72:dd:2e:a3:55
[ 4060.187988] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 4376.029472] wlp2s11: Setting MAC to 26:ec:96:62:21:53
[ 4376.155619] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 4691.029088] wlp2s11: Setting MAC to 4e:60:45:7e:85:95
[ 4691.158813] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 5006.005006] wlp2s11: Setting MAC to e2:ac:df:99:df:45
[ 5006.137327] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 5321.036617] wlp2s11: Setting MAC to 12:fe:74:9c:23:9b
[ 5321.163473] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 5636.029561] wlp2s11: Setting MAC to fa:f5:5c:e9:30:60
[ 5636.154482] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 5951.019517] wlp2s11: Setting MAC to aa:01:12:e0:88:58
[ 5951.146582] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 6266.013481] wlp2s11: Setting MAC to 62:fd:5b:31:1c:56
[ 6266.139496] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 6580.999078] wlp2s11: Setting MAC to 4e:c1:0c:e3:1b:71
[ 6581.127261] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 6896.029541] wlp2s11: Setting MAC to b2:6b:f9:36:32:da
[ 6896.157513] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 7211.017055] wlp2s11: Setting MAC to a6:b6:7f:a6:5d:46
[ 7211.151239] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 7443.560668] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 7443.560914] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 7443.561560] wlp2s11: Setting MAC to 52:34:db:54:97:2c
[ 7443.673532] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 7443.767384] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 7447.443031] wlp2s11: Setting MAC to a6:b6:7f:a6:5d:46
[ 7447.554843] IPv6: ADDRCONF(NETDEV_UP): wlp2s11: link is not ready
[ 7475.004701] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s11: link becomes ready
** Model information
** Loaded modules:
lib80211_crypt_ccmp
nls_utf8
isofs
loop
tifm_sd
mmc_core
ipw2200
libipw
lib80211
snd_intel8x0
cfg80211
snd_intel8x0m
snd_ac97_codec
ac97_bus
pcmcia
snd_pcm
iTCO_wdt
pcspkr
joydev
snd_timer
snd
yenta_socket
iTCO_vendor_support
soundcore
tifm_7xx1
serio_raw
tifm_core
pcmcia_rsrc
sg
pcmcia_core
sony_laptop
rng_core
rfkill
ac
battery
evdev
pcc_cpufreq
acpi_cpufreq
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
cryptd
aes_i586
sr_mod
cdrom
sd_mod
ata_generic
hid_generic
usbhid
hid
i915
i2c_algo_bit
ata_piix
drm_kms_helper
libata
syscopyarea
sysfillrect
uhci_hcd
sysimgblt
fb_sys_fops
ehci_pci
psmouse
ehci_hcd
drm
scsi_mod
usbcore
firewire_ohci
i2c_i801
lpc_ich
firewire_core
e100
mii
crc_itu_t
usb_common
thermal
button
video
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3580] (rev 02)
Subsystem: Sony Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O
Controller [104d:8191]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: Sony Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O
Controller [104d:8191]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: Sony Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O
Controller [104d:8191]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM
Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Sony Corporation 82852/855GM Integrated Graphics Device
[104d:8192]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated
Graphics Device [8086:3582] (rev 02)
Subsystem: Sony Corporation 82852/855GM Integrated Graphics Device
[104d:8192]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
Kernel modules: i915
00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00
[UHCI])
Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB
UHCI Controller [104d:8188]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00
[UHCI])
Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB
UHCI Controller [104d:8188]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI])
Subsystem: Sony Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI
Controller [104d:8188]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 9
Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e02fffff
Prefetchable memory behind bridge: 20000000-27ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge [8086:24cc] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE
Controller [8086:24ca] (rev 03) (prog-if 8a [ISA Compatibility mode controller,
supports both channels switched to PCI native mode, supports bus mastering])
Subsystem: Sony Corporation 82801DBM (ICH4-M) IDE Controller [104d:8188]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 28000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller [8086:24c3] (rev 03)
Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
Controller [104d:8188]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97
Audio Controller [104d:81c5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
Kernel modules: snd_intel8x0
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 [Generic])
Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97
Modem Controller [104d:818c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0m
Kernel modules: snd_intel8x0m
02:04.0 CardBus bridge [0607]: Texas Instruments PCI7420 CardBus Controller
[104c:ac8e]
Subsystem: Sony Corporation PCI7420 CardBus Controller [104d:818f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 2c000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 20000000-23ffffff (prefetchable)
Memory window 1: 30000000-33ffffff
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:04.2 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI7x20 1394a-2000 OHCI
Two-Port PHY/Link-Layer Controller [104c:802e] (prog-if 10 [OHCI])
Subsystem: Sony Corporation PCI7x20 1394a-2000 OHCI Two-Port
PHY/Link-Layer Controller [104d:818f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 9
Region 0: Memory at e0207000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
02:04.3 Mass storage controller [0180]: Texas Instruments PCI7420/7620
SD/MS-Pro Controller [104c:ac8f]
Subsystem: Sony Corporation PCI7420/7620 SD/MS-Pro Controller
[104d:8190]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at e0204000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
Kernel modules: tifm_7xx1
02:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (MOB)
Ethernet Controller [8086:103d] (rev 83)
Subsystem: Sony Corporation 82801DB PRO/100 VE (MOB) Ethernet
Controller [104d:818d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e0205000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
Kernel modules: e100
02:0b.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG
[Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network
Connection [8086:2753]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e0206000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
Kernel modules: ipw2200
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 10.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.19.0-6-686 (SMP w/1 CPU core)
Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8),
LANGUAGE=zh_CN.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-6-686 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-6-686 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-6-686 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-6-686 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
ii firmware-ipw2x00 20190717-2
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20190717-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
