Package: src:linux
Version: 4.19.37-3
Severity: grave
Tags: security
Justification: user security hole
When logging out, a part of the previous session is still visible.
This might be used to compromise the user's account or leak other
private information, depending on what was written on the screen.
-- Package-specific info:
** Version:
Linux version 4.19.0-5-amd64 (debian-ker...@lists.debian.org) (gcc version
8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-3 (2019-05-15)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64
root=UUID=e3631277-c4d0-460e-a2a3-6de16013e050 ro quiet
** Tainted: I (2048)
* Working around severe firmware bug.
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Z800 Workstation
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 786G5 v01.17
board_vendor: Hewlett-Packard
board_name: 0AECh
board_version:
** Loaded modules:
devlink
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
bnep
bluetooth
drbg
ansi_cprng
ecdh_generic
binfmt_misc
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
grace
fscache
sunrpc
smsc47b397
loop
firewire_sbp2
parport_pc
ppdev
lp
parport
nft_counter
ip6_tables
nft_compat
nf_tables
x_tables
nfnetlink
nouveau
mxm_wmi
video
intel_powerclamp
coretemp
kvm_intel
ttm
snd_hda_codec_realtek
drm_kms_helper
snd_hda_codec_generic
kvm
snd_hda_intel
drm
snd_hda_codec
hp_wmi
i2c_algo_bit
sparse_keymap
snd_hda_core
rfkill
irqbypass
snd_hwdep
evdev
snd_pcm
wmi_bmof
wmi
snd_timer
sg
intel_cstate
intel_uncore
serio_raw
snd
iTCO_wdt
iTCO_vendor_support
i7core_edac
soundcore
pcc_cpufreq
button
acpi_cpufreq
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
hid_generic
usbhid
hid
sr_mod
cdrom
sd_mod
ahci
mptsas
libahci
firewire_ohci
mptscsih
mptbase
psmouse
libata
crc32c_intel
scsi_transport_sas
ehci_pci
uhci_hcd
firewire_core
ehci_hcd
crc_itu_t
tg3
lpc_ich
scsi_mod
usbcore
libphy
floppy
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port
[8086:3406] (rev 13)
Subsystem: Hewlett-Packard Company 5520 I/O Hub to ESI Port [103c:130b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e0000000-e2ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical and Link
Layer Registers Port 0 [8086:3425] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing and Protocol
Layer Registers Port 0 [8086:3426] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:11.0 PIC [0800]: Intel Corporation 7500/5520/5500 Physical and Link Layer
Registers Port 1 [8086:3427] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:11.1 PIC [0800]: Intel Corporation 7500/5520/5500 Routing & Protocol Layer
Register Port 1 [8086:3428] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System
Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: i7core_edac
Kernel modules: i7core_edac
00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and
Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status
and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:15.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Trusted Execution
Technology Registers [8086:342f] (rev 13) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at c040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB2 EHCI
Controller [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at e3304800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller [8086:3a3e]
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) HD Audio
Controller [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at e3300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=1c, subordinate=1c, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e3400000-e35fffff
Prefetchable memory behind bridge: 00000000e3600000-00000000e37fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e3100000-e31fffff
Prefetchable memory behind bridge: 00000000e3800000-00000000e39fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e3200000-e32fffff
Prefetchable memory behind bridge: 00000000e3a00000-00000000e3bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at c060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at c0a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB2 EHCI
Controller [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e3304c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=37, subordinate=37, sec-latency=32
Memory behind bridge: e3000000-e30fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
Subsystem: Hewlett-Packard Company 82801JIR (ICH10R) LPC Interface
Controller [103c:130b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation SATA Controller [RAID
mode] [8086:2822]
Subsystem: Hewlett-Packard Company SATA Controller [RAID mode]
[103c:130b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 25
Region 0: I/O ports at c100 [size=8]
Region 1: I/O ports at c110 [size=4]
Region 2: I/O ports at c108 [size=8]
Region 3: I/O ports at c114 [size=4]
Region 4: I/O ports at c0c0 [size=32]
Region 5: Memory at e3304000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme
BCM5764M Gigabit Ethernet PCIe [14e4:1684] (rev 10)
Subsystem: Hewlett-Packard Company NetXtreme BCM5764M Gigabit Ethernet
PCIe [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e3200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
02:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme
BCM5764M Gigabit Ethernet PCIe [14e4:1684] (rev 10)
Subsystem: Hewlett-Packard Company NetXtreme BCM5764M Gigabit Ethernet
PCIe [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at e3100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
0f:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98 [Quadro NVS
295] [10de:06fd] (rev a1) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation G98 [Quadro NVS 295] [10de:062e]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at d000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
37:09.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a
Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company FW322/323 [TrueFire] 1394a
Controller [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
40:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=40, secondary=42, subordinate=42, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
40:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=40, secondary=60, subordinate=60, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
40:09.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=40, secondary=41, subordinate=41, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: e4000000-e40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
40:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical and Link
Layer Registers Port 0 [8086:3425] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing and Protocol
Layer Registers Port 0 [8086:3426] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
40:11.0 PIC [0800]: Intel Corporation 7500/5520/5500 Physical and Link Layer
Registers Port 1 [8086:3427] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:11.1 PIC [0800]: Intel Corporation 7500/5520/5500 Routing & Protocol Layer
Register Port 1 [8086:3428] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
40:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System
Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: i7core_edac
40:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and
Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status
and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:15.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Trusted Execution
Technology Registers [8086:342f] (rev 13) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
41:00.0 SCSI storage controller [0100]: Broadcom / LSI SAS1068E PCI-Express
Fusion-MPT SAS [1000:0058] (rev 08)
Subsystem: Hewlett-Packard Company SAS1068E PCI-Express Fusion-MPT SAS
[103c:130b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at e4010000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at e4000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: mptsas
Kernel modules: mptsas
7e:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath
Architecture Generic Non-Core Registers [8086:2c40] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QuickPath
Architecture Generic Non-Core Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath
Architecture System Address Decoder [8086:2c01] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QuickPath
Architecture System Address Decoder [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 0
[8086:2c10] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Link 0
[103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 0
[8086:2c11] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Physical 0
[103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 1
[8086:2c14] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Link 1
[103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.5 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 1
[8086:2c15] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Physical 1
[103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller [8086:2c18] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Target Address Decoder [8086:2c19] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Target Address Decoder [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:03.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller RAS Registers [8086:2c1a] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller RAS Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Test Registers [8086:2c1c] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Test Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Control Registers [8086:2c20] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Address Registers [8086:2c21] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Address Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Rank Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Thermal Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Control Registers [8086:2c28] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Address Registers [8086:2c29] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Address Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Rank Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Thermal Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Control Registers [8086:2c30] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Address Registers [8086:2c31] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Address Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Rank Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Thermal Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath
Architecture Generic Non-Core Registers [8086:2c40] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QuickPath
Architecture Generic Non-Core Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath
Architecture System Address Decoder [8086:2c01] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QuickPath
Architecture System Address Decoder [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 0
[8086:2c10] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Link 0
[103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 0
[8086:2c11] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Physical 0
[103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 1
[8086:2c14] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Link 1
[103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.5 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 1
[8086:2c15] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Physical 1
[103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller [8086:2c18] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Target Address Decoder [8086:2c19] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Target Address Decoder [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:03.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller RAS Registers [8086:2c1a] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller RAS Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Test Registers [8086:2c1c] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Test Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Control Registers [8086:2c20] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Address Registers [8086:2c21] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Address Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Rank Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Thermal Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Control Registers [8086:2c28] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Address Registers [8086:2c29] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Address Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Rank Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Thermal Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Control Registers [8086:2c30] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Address Registers [8086:2c31] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Address Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Rank Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Thermal Control Registers [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 006 Device 004: ID 046d:c06a Logitech, Inc. USB Optical Mouse
Bus 006 Device 003: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 006 Device 002: ID 03f0:2f24 Hewlett-Packard LP2475w Monitor Hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 10.0
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'stable-updates'), (500,
'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.0-5-amd64 (SMP w/8 CPU cores)
Kernel taint flags: TAINT_FIRMWARE_WORKAROUND
Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=POSIX
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-5-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-5-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-5-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-18
ii linux-doc-4.19 4.19.37-3
Versions of packages linux-image-4.19.0-5-amd64 is related to:
ii firmware-amd-graphics 20190114-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190114-1
ii firmware-misc-nonfree 20190114-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
