Package: bugzilla
Version: 2.20-1
Hello
Trying to install bugzilla it always hangs, 100% reprodicible.
CNTL-C can terminate the process.
It seems to expect an other terminal as I have...??
(I'm using ssh putty, TERM=xterm, LINES=57, COLUMNS=146(=more then 127))
Reducing size let it work a step further.
Other pakets bugzilla needs ( some libs) could be installed.
bugzilla-doc installs OK too.
"stable" and "testing" are failing both.
Pardon if the is was already discussed, but searching
for a bug report about a bug reporting software having a bug
is very difficult because it give tons of false hits ,-)
debian:~# aptitude install bugzilla
Reading Package Lists... Done
Building Dependency Tree
Reading extended state information
Initializing package states... Done
The following NEW packages will be installed:
bugzilla
0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/368kB of archives. After unpacking 1743kB will be used.
Writing extended state information... Done
Reading package fields... Done
Reading package status... Done
Retrieving bug reports... Done
Preconfiguring packages ...
strace aptitude install bugzilla
...
waitpid(29896, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 29896
open("/var/log/aptitude", O_WRONLY|O_APPEND|O_CREAT, 0666) = 50
fstat64(50, {st_mode=S_IFREG|0644, st_size=490806, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x40019000
fstat64(50, {st_mode=S_IFREG|0644, st_size=490806, ...}) = 0
_llseek(50, 490806, [490806], SEEK_SET) = 0
time(NULL) = 1142956183
open("/etc/localtime", O_RDONLY) = 51
fstat64(51, {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x4001a000
read(51, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\10\0\0\0\10"..., 4096) =
837
close(51) = 0
munmap(0x4001a000, 4096) = 0
write(50, "Aptitude 0.2.15.9: log report\nTu"..., 445) = 445
close(50) = 0
munmap(0x40019000, 4096) = 0
close(3) = 0
brk(0) = 0x839c000
brk(0x83ca000) = 0x83ca000
brk(0) = 0x83ca000
brk(0) = 0x83ca000
brk(0x83b3000) = 0x83b3000
brk(0) = 0x83b3000
brk(0) = 0x83b3000
brk(0) = 0x83b3000
brk(0x839c000) = 0x839c000
brk(0) = 0x839c000
brk(0) = 0x839c000
brk(0x83ca000) = 0x83ca000
brk(0) = 0x83ca000
brk(0) = 0x83ca000
brk(0x83b3000) = 0x83b3000
brk(0) = 0x83b3000
brk(0) = 0x83b3000
brk(0) = 0x83b3000
brk(0x839c000) = 0x839c000
brk(0) = 0x839c000
brk(0) = 0x839c000
brk(0x83be000) = 0x83be000
brk(0) = 0x83be000
brk(0x83ed000) = 0x83ed000
brk(0) = 0x83ed000
brk(0) = 0x83ed000
brk(0x83d6000) = 0x83d6000
brk(0) = 0x83d6000
brk(0) = 0x83d6000
brk(0) = 0x83d6000
brk(0x83a7000) = 0x83a7000
brk(0) = 0x83a7000
brk(0) = 0x83a7000
brk(0) = 0x83a7000
brk(0x839c000) = 0x839c000
brk(0) = 0x839c000
pipe([3, 50]) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
fcntl64(50, F_SETFD, FD_CLOEXEC) = 0
fork() = 29897
close(3) = 0
fcntl64(50, F_GETFL) = 0x1 (flags O_WRONLY)
fstat64(50, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x40019000
_llseek(50, 0, 0xbffff3f4, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(50, "/home/cds/sarge-6/pool/main/b/bu"..., 71) = 71
close(50) = 0
munmap(0x40019000, 4096) = 0
Reading package fields... Done
Reading package status... Done
Retrieving bug reports... Done
[{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 29897
--- SIGCHLD (Child exited) @ 0 (0) ---
pipe([3, 50]) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
fcntl64(50, F_SETFD, FD_CLOEXEC) = 0
fork() = 29916
close(3) = 0
fcntl64(50, F_GETFL) = 0x1 (flags O_WRONLY)
fstat64(50, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x40019000
_llseek(50, 0, 0xbffff3f4, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(50, "VERSION 2\nAPT::Architecture=i386"..., 1596) = 1596
close(50) = 0
munmap(0x40019000, 4096) = 0
waitpid(29916, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 29916
--- SIGCHLD (Child exited) @ 0 (0) ---
pipe([3, 50]) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
fcntl64(50, F_SETFD, FD_CLOEXEC) = 0
fork() = 29918
close(3) = 0
fcntl64(50, F_GETFL) = 0x1 (flags O_WRONLY)
fstat64(50, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x40019000
_llseek(50, 0, 0xbffff3f4, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(50, "/home/cds/sarge-6/pool/main/b/bu"..., 71) = 71
close(50) = 0
munmap(0x40019000, 4096) = 0
waitpid(29918, debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend requires a screen at least 13 lines tall and 31
columns wide.)
debconf: falling back to frontend: Readline
Preconfiguring packages ...
0xbffff528, 0) = ? ERESTARTSYS (To be restarted)
--- SIGWINCH (Window changed) @ 0 (0) ---
ioctl(1, TIOCGWINSZ, {ws_row=24, ws_col=146, ws_xpixel=0, ws_ypixel=0}) = 0
sigreturn() = ? (mask now [RTMIN])
waitpid(29918, 0xbffff528, 0) = ? ERESTARTSYS (To be restarted)
--- SIGWINCH (Window changed) @ 0 (0) ---
ioctl(1, TIOCGWINSZ, {ws_row=35, ws_col=146, ws_xpixel=0, ws_ypixel=0}) = 0
sigreturn() = ? (mask now [RTMIN])
waitpid(29918, <unfinished ...>
----------------------------------------
An other try with a smaller window:
fstat64(50, {st_mode=S_IFREG|0644, st_size=491251, ...}) = 0
_llseek(50, 491251, [491251], SEEK_SET) = 0
time(NULL) = 1142956546
open("/etc/localtime", O_RDONLY) = 51
fstat64(51, {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x4001a000
read(51, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\10\0\0\0\10"..., 4096) =
837
close(51) = 0
munmap(0x4001a000, 4096) = 0
write(50, "Aptitude 0.2.15.9: log report\nTu"..., 445) = 445
close(50) = 0
munmap(0x40019000, 4096) = 0
close(3) = 0
brk(0) = 0x839c000
brk(0x83ca000) = 0x83ca000
brk(0) = 0x83ca000
brk(0) = 0x83ca000
brk(0x83b3000) = 0x83b3000
brk(0) = 0x83b3000
brk(0) = 0x83b3000
brk(0) = 0x83b3000
brk(0x839c000) = 0x839c000
brk(0) = 0x839c000
brk(0) = 0x839c000
brk(0x83ca000) = 0x83ca000
brk(0) = 0x83ca000
brk(0) = 0x83ca000
brk(0x83b3000) = 0x83b3000
brk(0) = 0x83b3000
brk(0) = 0x83b3000
brk(0) = 0x83b3000
brk(0x839c000) = 0x839c000
brk(0) = 0x839c000
brk(0) = 0x839c000
brk(0x83be000) = 0x83be000
brk(0) = 0x83be000
brk(0x83ed000) = 0x83ed000
brk(0) = 0x83ed000
brk(0) = 0x83ed000
brk(0x83d6000) = 0x83d6000
brk(0) = 0x83d6000
brk(0) = 0x83d6000
brk(0) = 0x83d6000
brk(0x83a7000) = 0x83a7000
brk(0) = 0x83a7000
brk(0) = 0x83a7000
brk(0) = 0x83a7000
brk(0x839c000) = 0x839c000
brk(0) = 0x839c000
pipe([3, 50]) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
fcntl64(50, F_SETFD, FD_CLOEXEC) = 0
fork() = 30461
close(3) = 0
fcntl64(50, F_GETFL) = 0x1 (flags O_WRONLY)
fstat64(50, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x40019000
_llseek(50, 0, 0xbffff3f4, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(50, "/home/cds/sarge-6/pool/main/b/bu"..., 71) = 71
close(50) = 0
munmap(0x40019000, 4096) = 0
Reading package fields... Done
Reading package status... Done
Retrieving bug reports... Done
[{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 30461
--- SIGCHLD (Child exited) @ 0 (0) ---
pipe([3, 50]) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
fcntl64(50, F_SETFD, FD_CLOEXEC) = 0
fork() = 30480
close(3) = 0
fcntl64(50, F_GETFL) = 0x1 (flags O_WRONLY)
fstat64(50, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x40019000
_llseek(50, 0, 0xbffff3f4, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(50, "VERSION 2\nAPT::Architecture=i386"..., 1596) = 1596
close(50) = 0
munmap(0x40019000, 4096) = 0
waitpid(30480, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 30480
--- SIGCHLD (Child exited) @ 0 (0) ---
pipe([3, 50]) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
fcntl64(50, F_SETFD, FD_CLOEXEC) = 0
fork() = 30482
close(3) = 0
fcntl64(50, F_GETFL) = 0x1 (flags O_WRONLY)
fstat64(50, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x40019000
_llseek(50, 0, 0xbffff3f4, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(50, "/home/cds/sarge-6/pool/main/b/bu"..., 71) = 71
close(50) = 0
munmap(0x40019000, 4096) = 0
waitpid(30482, Preconfiguring packages ...
Steps not shown
#aptitude purge bugzilla
#aptitude autoclean
#aptitude clean
#aptitude update
#aptitude upgrade
debian:~# aptitude -v show bugzilla
Package: bugzilla
State: not installed
Version: 2.20-1
Priority: optional
Section: web
Maintainer: Alexis Sukrieh <[EMAIL PROTECTED]>
Uncompressed Size: 3872k
Architecture: all
Compressed Size: 802k
Filename: pool/main/b/bugzilla/bugzilla_2.20-1_all.deb
MD5sum: 87794241d9d087abe7c9cba409dfbcf6
Archive: testing
Depends: debconf (>= 0.9.95) | debconf-2.0, libtemplate-perl,
libappconfig-perl, libdbd-
mysql-perl, libtimedate-perl, apache | apache-ssl |
cern-httpd | boa | wn | aolserver | roxen | thttpd | caudium |
apache-perl |
apache2-mpm-perchild | apache2-mpm-threadpool |
apache2-mpm-prefork | apache2-mpm-worker | bozohttpd | httpd, sendmail
| mail-
transport-agent, ucf (>= 0.08), patch, libmailtools-perl
Recommends: libchart-perl (>= 0.99c.pre3-0.1), libxml-parser-perl, mysql-server
Suggests: bugzilla-doc, libnet-ldap-perl, libgd-text-perl, libgd-graph-perl,
libgd-gd2-
perl | libgd-noxpm-perl, python, ruby
Description: web-based bug tracking system
Bugzilla is a Bug Tracking System available through a web interface.
It supports the following features:
* report bugs
* assign bugs to the appropriate developers
* prioritize bugs
* set bug dependencies
* arrange bugs by product and component
With these features, you can also use Bugzilla as a to-do list manager.
Bugzilla is a web application that lets users report and look up existing
bugs. Changes
made to a bug's status are automatically sent to users
concerned with it.
Package: bugzilla
State: not installed
Version: 2.16.7-7sarge1
Priority: optional
Section: web
Maintainer: R??mi Perrot <[EMAIL PROTECTED]>
Uncompressed Size: 1743k
Architecture: all
Compressed Size: 368k
Filename: pool/main/b/bugzilla/bugzilla_2.16.7-7sarge1_all.deb
MD5sum: bb23cb0437b013662afc69155ce879c5
Archive: stable, stable
Depends: debconf (>= 0.9.95), libtemplate-perl, libappconfig-perl,
libdbd-mysql-perl,
libtimedate-perl, apache | apache-ssl | cern-httpd | boa |
wn | aolserver | roxen | thttpd | caudium | apache-perl |
apache2-mpm-perchild |
apache2-mpm-threadpool | apache2-mpm-prefork |
apache2-mpm-worker | bozohttpd | httpd, sendmail | mail-transport-agent
Recommends: libchart-perl (>= 0.99c.pre3-0.1), libxml-parser-perl, mysql-server
Suggests: bugzilla-doc, libnet-ldap-perl
Description: Mozilla bug tracking system
Bugzilla is a web-based tool that lets you:
* report bugs
* assign bugs to the appropriate developers
* prioritize bugs
* set bug dependencies
* arrange bugs by product and component
With these features, you can also use Bugzilla as a to-do list manager.
Bugzilla is a web application that lets users report and look up existing
bugs. Changes
made to a bug's status are automatically sent to users
concerned with it.
Writing extended state information... Done
Get:1 http://ftp.freenet.de testing/main bugzilla 2.20-1 [802kB]
Fetched 802kB in 8s (89.3kB/s)
Reading package fields... Done
Reading package status... Done
Retrieving bug reports... Done
Preconfiguring packages ...
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
