Package: src:linux Version: 4.18.10-2 Severity: wishlist Hi!
I'm currently running this kernel on Raspberry Pi 3b without much trouble, however no sound devices are found, After reading and looking at raspbian modules, it seems that sound is handled by this module, so if you would please enable it with a little luck we'll have sound working on Pi 3b on standard buster. Thanks in advance. -- Package-specific info: ** Version: Linux version 4.18.0-2-arm64 (debian-ker...@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.10-2 (2018-10-07) ** Command line: bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa02082 bcm2709.serial=0xff0fa6ff bcm2709.uart_clock=48000000 smsc95xx.macaddr=B8:27:EB:0F:A6:FF vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/md1 rw elevator=deadline fsck.repair=yes net.ifnames=0 cma=64M rootwait ** Not tainted ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information Device Tree model: Raspberry Pi 3 Model B Rev 1.2 ** Loaded modules: nf_log_ipv4 nf_log_common xt_LOG xt_pkttype xt_limit ipt_REJECT nf_reject_ipv4 xt_owner xt_conntrack iptable_filter ipt_MASQUERADE xt_REDIRECT xt_nat xt_tcpudp xt_addrtype iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_connmark nf_conntrack xt_mark iptable_mangle bridge stp llc vc4 snd_soc_core nls_ascii nls_cp437 snd_pcm_dmaengine vfat fat snd_pcm brcmfmac snd_timer snd soundcore cec brcmutil drm_kms_helper cfg80211 drm asix sg bcm2835_rng rng_core smsc95xx libphy bcm2835_thermal leds_gpio usbnet mii rfkill pwm_bcm2835 bcm2835_wdt ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 fscrypto ecb aes_arm64 sd_mod raid10 uas raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx usb_storage xor scsi_mod raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod dwc2 udc_core usbcore sdhci_iproc sdhci_pltfm usb_common sdhci bcm2835 phy_generic ** PCI devices: not available ** USB devices: Bus 001 Device 006: ID 0bc2:2322 Seagate RSS LLC Bus 001 Device 005: ID 0b95:772b ASIX Electronics Corp. AX88772B Bus 001 Device 004: ID 0939:0b15 Lumberg, Inc. Toshiba Stor.E Alu 2 Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: arm64 (aarch64) Kernel: Linux 4.18.0-2-arm64 (SMP w/4 CPU cores) Locale: LANG=gl_ES.UTF-8, LC_CTYPE=gl_ES.UTF-8 (charmap=UTF-8), LANGUAGE=gl_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.18.0-2-arm64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.132 ii kmod 25-1 ii linux-base 4.5 Versions of packages linux-image-4.18.0-2-arm64 recommends: ii apparmor 2.13-8 ii firmware-linux-free 3.4 ii irqbalance 1.3.0-0.1+b1 Versions of packages linux-image-4.18.0-2-arm64 suggests: pn debian-kernel-handbook <none> pn linux-doc-4.18 <none> Versions of packages linux-image-4.18.0-2-arm64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20180825+dfsg-1 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20180825+dfsg-1 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
