Package: src:linux Version: 4.18.6-1 Severity: normal Dear Maintainer,
Some High Resolution Screens are downgraded to full HD due to DP link training failures.This problem can be easily solved by allowing retries during DP link training. If the hardware is capable of running at high resolution the link will be properly calibrated after 2 o 3 attempts. If the hardware cannot run at that resolution the link will be downgraded in less than a second. The proposed patch is self contained and has been tested successfuly on 4 different kernels (4.15 - 4.18). This bug has been replicated on multiple devices and screens and notified to upstream: https://bugs.freedesktop.org/show_bug.cgi?id=106223 Unfortunately it is considered low-priority for Intel (but high-annoying by the users). Hopefully this patch will allow users to make full use of their screens and I will spend less time rebuilding my kernel. -- Package-specific info: ** Version: Linux version 4.18.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.6-1 (2018-09-06) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-1-amd64 root=UUID=4ac4c7fd-7b0a-4fc0-a4aa-e063d18bfe9f ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 3.828853] usb 1-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.828854] usb 1-3.1.1: Product: Lenovo USB Optical Mouse [ 3.828855] usb 1-3.1.1: Manufacturer: PixArt [ 3.956542] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 3.956546] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.956549] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 3.956550] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.956552] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.956554] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12 [ 3.964026] usb 1-3.1.2: new low-speed USB device number 9 using xhci_hcd [ 4.122473] usb 1-3.1.2: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.02 [ 4.122480] usb 1-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.122484] usb 1-3.1.2: Product: USB NetVista Full Width Keyboard [ 4.122488] usb 1-3.1.2: Manufacturer: CHICONY [ 4.233894] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 4.234952] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 4.235066] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 4.235176] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 4.235283] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 4.235389] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 4.235493] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 4.436110] media: Linux media interface: v0.10 [ 4.446085] videodev: Linux video capture interface: v2.00 [ 4.453678] uvcvideo: Found UVC 1.00 device XiaoMi USB 2.0 Webcam (05c8:03a2) [ 4.462195] Bluetooth: Core ver 2.22 [ 4.462204] NET: Registered protocol family 31 [ 4.462205] Bluetooth: HCI device and connection manager initialized [ 4.462208] Bluetooth: HCI socket layer initialized [ 4.462209] Bluetooth: L2CAP socket layer initialized [ 4.462213] Bluetooth: SCO socket layer initialized [ 4.465409] usbcore: registered new interface driver btusb [ 4.466339] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 [ 4.467345] Bluetooth: hci0: Device revision is 16 [ 4.467346] Bluetooth: hci0: Secure boot is enabled [ 4.467347] Bluetooth: hci0: OTP lock is enabled [ 4.467347] Bluetooth: hci0: API lock is enabled [ 4.467348] Bluetooth: hci0: Debug lock is disabled [ 4.467349] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 4.468378] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.sfi [ 4.468381] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi [ 4.471474] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized! [ 4.471475] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized! [ 4.471476] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized! [ 4.471477] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! [ 4.471530] input: XiaoMi USB 2.0 Webcam: XiaoMi U as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input22 [ 4.471579] usbcore: registered new interface driver uvcvideo [ 4.471579] USB Video Class driver (1.1.1) [ 4.485825] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0 [ 4.485827] Clock recovery check failed, cannot continue channel equalization [ 4.509735] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.509736] Bluetooth: BNEP filters: protocol multicast [ 4.509738] Bluetooth: BNEP socket layer initialized [ 5.478325] input: PixArt Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.1/1-3.1.1:1.0/0003:17EF:600E.0002/input/input23 [ 5.478406] hid-generic 0003:17EF:600E.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Lenovo USB Optical Mouse] on usb-0000:00:14.0-3.1.1/input0 [ 5.481000] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.0/0003:04B3:3025.0003/input/input24 [ 5.544287] hid-generic 0003:04B3:3025.0003: input,hidraw2: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:14.0-3.1.2/input0 [ 5.544317] usbcore: registered new interface driver usbhid [ 5.544317] usbhid: USB HID core driver [ 6.008101] Bluetooth: hci0: Waiting for firmware download to complete [ 6.008361] Bluetooth: hci0: Firmware loaded in 1506816 usecs [ 6.008396] Bluetooth: hci0: Waiting for device to boot [ 6.020360] Bluetooth: hci0: Device booted in 11693 usecs [ 6.020482] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.ddc [ 6.020484] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc [ 6.023404] Bluetooth: hci0: Applying Intel DDC parameters completed [ 6.076265] Bluetooth: RFCOMM TTY layer initialized [ 6.076268] Bluetooth: RFCOMM socket layer initialized [ 6.076271] Bluetooth: RFCOMM ver 1.11 [ 6.803174] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0 [ 6.803175] Clock recovery check failed, cannot continue channel equalization [ 6.834651] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0 [ 6.834652] Clock recovery check failed, cannot continue channel equalization [ 7.232871] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8.297844] wlp2s0: authenticate with 78:11:dc:42:e1:3a [ 8.307181] wlp2s0: send auth to 78:11:dc:42:e1:3a (try 1/3) [ 8.315611] wlp2s0: authenticated [ 8.316045] wlp2s0: associate with 78:11:dc:42:e1:3a (try 1/3) [ 8.318061] wlp2s0: RX AssocResp from 78:11:dc:42:e1:3a (capab=0x11 status=0 aid=2) [ 8.322322] wlp2s0: associated [ 8.352912] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 11.973668] fuse init (API version 7.27) [ 13.444898] rfkill: input handler disabled [ 13.652922] kauditd_printk_skb: 14 callbacks suppressed [ 13.652922] audit: type=1400 audit(1536783375.819:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1782 comm="apparmor_parser" [ 13.727426] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 13.728635] Bridge firewalling registered [ 13.860442] Initializing XFRM netlink socket [ 13.956365] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 14.087103] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0 [ 14.087104] Clock recovery check failed, cannot continue channel equalization [ 14.118649] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0 [ 14.118651] Clock recovery check failed, cannot continue channel equalization [ 14.150443] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0 [ 14.150444] Clock recovery check failed, cannot continue channel equalization [ 14.182042] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0 [ 14.182043] Clock recovery check failed, cannot continue channel equalization [ 14.213483] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0 [ 14.213484] Clock recovery check failed, cannot continue channel equalization [ 14.244932] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0xcc adj_req2_3:0x0 [ 14.244933] Clock recovery check failed, cannot continue channel equalization ** Model information sys_vendor: Timi product_name: TM1703 product_version: XMAKB3M0P0D0A chassis_vendor: Timi chassis_version: XMAKB3M0P0D0A bios_vendor: Insyde Corp. bios_version: XMAKB3M0P0D0A board_vendor: Timi board_name: TM1703 board_version: XMAKB3M0P0D0A ** Loaded modules: ipt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype iptable_filter xt_conntrack nf_nat nf_conntrack libcrc32c br_netfilter bridge stp llc overlay fuse ctr ccm cmac rfcomm usbhid bnep btusb btrtl btbcm btintel bluetooth uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common drbg ansi_cprng videodev media ecdh_generic snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic bbswitch(O) arc4 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core iwlmvm snd_soc_acpi msr i915(O) nls_ascii joydev nls_cp437 mac80211 intel_rapl vfat snd_soc_core fat snd_compress snd_hda_intel x86_pkg_temp_thermal intel_powerclamp snd_hda_codec coretemp dell_wmi_aio iwlwifi wmi_bmof sparse_keymap kvm_intel snd_hda_core kvm irqbypass efi_pstore snd_hwdep cfg80211 drm_kms_helper crct10dif_pclmul crc32_pclmul snd_pcm ghash_clmulni_intel drm snd_timer intel_cstate evdev snd mei_me ucsi_acpi intel_uncore typec_ucsi iTCO_wdt intel_rapl_perf serio_raw pcspkr iTCO_vendor_support efivars hid_multitouch i2c_algo_bit rfkill soundcore idma64 mei typec hp_wireless battery ac tpm_crb wmi tpm_tis tpm_tis_core tpm video rng_core button acpi_pad pcc_cpufreq parport_pc ppdev lp parport efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb hid_generic crc32c_intel ahci aesni_intel libahci aes_x86_64 xhci_pci crypto_simd libata cryptd glue_helper nvme xhci_hcd i2c_i801 nvme_core usbcore scsi_mod intel_lpss_pci i2c_hid usb_common intel_lpss thermal hid ** Network interface configuration: source /etc/network/interfaces.d/* auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 68:ec:c5:c6:25:28 brd ff:ff:ff:ff:ff:ff inet 192.168.1.102/24 brd 192.168.1.255 scope global dynamic noprefixroute wlp2s0 valid_lft 42755sec preferred_lft 42755sec inet6 fd3d:3def:f3ee::57d/128 scope global noprefixroute valid_lft forever preferred_lft forever inet6 fd3d:3def:f3ee:0:2b45:5d06:bba6:9fdf/64 scope global noprefixroute valid_lft forever preferred_lft forever inet6 fe80::6d7a:5232:bc13:33c6/64 scope link noprefixroute valid_lft forever preferred_lft forever 3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default link/ether 02:42:e9:d3:ff:e5 brd ff:ff:ff:ff:ff:ff inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0 valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed docker0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlp2s0: 2394565 3149 0 0 0 0 0 0 532228 2009 0 0 0 0 0 0 lo: 6954 90 0 0 0 0 0 0 6954 90 0 0 0 0 0 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5914] (rev 08) Subsystem: Xiaomi Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [1d72:1703] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 620 [8086:5917] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Xiaomi UHD Graphics 620 [1d72:1703] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 137 Region 0: Memory at b2000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI]) Subsystem: Xiaomi Sunrise Point-LP USB 3.0 xHCI Controller [1d72:1703] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 126 Region 0: Memory at b4210000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21) Subsystem: Xiaomi Sunrise Point-LP Serial IO I2C Controller [1d72:1703] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at b422a000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21) Subsystem: Xiaomi Sunrise Point-LP Serial IO I2C Controller [1d72:1703] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at b422b000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel-lpss Kernel modules: intel_lpss_pci 00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21) Subsystem: Xiaomi Sunrise Point-LP CSME HECI [1d72:1703] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 135 Region 0: Memory at b422c000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21) (prog-if 01 [AHCI 1.0]) Subsystem: Xiaomi Sunrise Point-LP SATA Controller [AHCI mode] [1d72:1703] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 127 Region 0: Memory at b4228000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at b422f000 (32-bit, non-prefetchable) [size=256] Region 2: I/O ports at 4080 [size=8] Region 3: I/O ports at 4088 [size=4] Region 4: I/O ports at 4060 [size=32] Region 5: Memory at b422d000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port [8086:9d10] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 122 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: b3000000-b3ffffff Prefetchable memory behind bridge: 00000000a0000000-00000000b1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 123 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: b4100000-b41fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 124 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: b4000000-b40fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1f.0 ISA bridge [0601]: Intel Corporation Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E [8086:9d4e] (rev 21) Subsystem: Xiaomi Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E [1d72:1703] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21) Subsystem: Xiaomi Sunrise Point-LP PMC [1d72:1703] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at b4224000 (32-bit, non-prefetchable) [size=16K] 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d71] (rev 21) Subsystem: Xiaomi Sunrise Point-LP HD Audio [1d72:1703] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 138 Region 0: Memory at b4220000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at b4200000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_soc_skl 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21) Subsystem: Xiaomi Sunrise Point-LP SMBus [1d72:1703] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at b422e000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 4040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 3D controller [0302]: NVIDIA Corporation GP108M [GeForce MX150] [10de:1d12] (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel modules: nvidia 02:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 78) Subsystem: Intel Corporation Wireless 8265 / 8275 [8086:9010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 136 Region 0: Memory at b4100000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi 03:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804] (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a801] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at b4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme ** USB devices: Bus 002 Device 003: ID 2109:8110 VIA Labs, Inc. Hub Bus 002 Device 002: ID 1d5c:5002 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 8087:0a2b Intel Corp. Bus 001 Device 004: ID 04f3:0c1a Elan Microelectronics Corp. Bus 001 Device 003: ID 05c8:03a2 Cheng Uei Precision Industry Co., Ltd (Foxlink) Bus 001 Device 007: ID 1d5c:5100 Bus 001 Device 009: ID 04b3:3025 IBM Corp. NetVista Full Width Keyboard Bus 001 Device 008: ID 17ef:600e Lenovo Bus 001 Device 005: ID 2109:2811 VIA Labs, Inc. Hub Bus 001 Device 002: ID 1d5c:5012 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.18.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.18.0-1-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.132 ii kmod 25-1 ii linux-base 4.5 Versions of packages linux-image-4.18.0-1-amd64 recommends: ii apparmor 2.13-8 ii firmware-linux-free 3.4 ii irqbalance 1.3.0-0.1+b1 Versions of packages linux-image-4.18.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.02+dfsg1-6 pn linux-doc-4.18 <none> Versions of packages linux-image-4.18.0-1-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 20180825+dfsg-1 pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20180825+dfsg-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
