This is a multi-part MIME message sent by reportbug.
--===============5888231089374810657==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Package: pulseaudio
Version: 12.0-1
Followup-For: Bug #904098
Dear Maintainer,
* What led up to the situation?
I upgraded Debian "testing" last night. Last system upgrade was a month or two
ago. Now I have no audio.
After reading this bug report, I purged timidity from my system. Pulseaudio
still only sees a dummy device. However, with timidity gone, I can use mpg321
to play mp3 files from the command line. So, timidity was a problem. But there
is something else going on I think.
Then I upgraded pulseaudio and dependancies to the latest versions in unstable,
and still pulseaudio isn't seeing my audio device.
I purged and reinstalled pulseaudio and dependencies. No change. No audio
card detected by pulseaudio.
-- lspci -v
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family
High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family High
Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at fe420000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
-- cat .config/pulse/e839f6829a8f43ddf188e65500000016-default-sink
alsa_output.pci-0000_00_1b.0.analog-stereo
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (750, 'testing'), (50, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.17.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages pulseaudio depends on:
ii adduser 3.117
ii libasound2 1.1.6-1
ii libasound2-plugins 1.1.6-1+b1
ii libc6 2.27-5
ii libcap2 1:2.25-1.2
ii libdbus-1-3 1.12.10-1
ii libgcc1 1:8.2.0-3
ii libice6 2:1.0.9-2
ii libltdl7 2.4.6-2.1
ii liborc-0.4-0 1:0.4.28-2
ii libpulse0 12.0-1
ii libsm6 2:1.2.2-1+b3
ii libsndfile1 1.0.28-4
ii libsoxr0 0.1.2-3
ii libspeexdsp1 1.2~rc1.2-1+b2
ii libstdc++6 8.2.0-3
ii libsystemd0 239-7
ii libtdb1 1.3.15-4
ii libudev1 239-7
ii libwebrtc-audio-processing1 0.3-1
ii libx11-6 2:1.6.5-1
ii libx11-xcb1 2:1.6.5-1
ii libxcb1 1.13-2
ii libxtst6 2:1.2.3-1
ii lsb-base 9.20170808
ii pulseaudio-utils 12.0-1
Versions of packages pulseaudio recommends:
ii dbus-user-session 1.12.10-1
ii libpam-systemd 239-7
ii rtkit 0.11-6
Versions of packages pulseaudio suggests:
pn paman <none>
ii paprefs 0.9.10-3
ii pavucontrol 3.0-4
pn pavumeter <none>
ii udev 239-7
-- no debconf information
--===============5888231089374810657==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="client.conf"
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
--===============5888231089374810657==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="daemon.conf"
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
--===============5888231089374810657==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="default.pa"
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the
paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
--===============5888231089374810657==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="system.pa"
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
--===============5888231089374810657==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="bug-pulseaudio-aplay_-L.0tnFGT"
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Digital
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=1
HDA Intel PCH, ALC892 Digital
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Direct sample snooping device
dsnoop:CARD=PCH,DEV=1
HDA Intel PCH, ALC892 Digital
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=1
HDA Intel PCH, ALC892 Digital
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=1
HDA Intel PCH, ALC892 Digital
Hardware device with all software conversions
--===============5888231089374810657==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="bug-pulseaudio-pactl_list.ftSdol"
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of
devices"
module.version = "12.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device
state of streams"
module.version = "12.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "12.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "12.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are
plugged/unplugged"
module.version = "12.0"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "12.0"
Module #6
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "12.0"
Module #7
Name: module-gsettings
Argument:
Usage counter: n/a
Properties:
module.author = "Sylvain Baubeau"
module.description = "GSettings Adapter"
module.version = "12.0"
Module #8
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and
source"
module.version = "12.0"
Module #9
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its
streams to the default sink/source"
module.version = "12.0"
Module #10
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if
it's a null one"
module.version = "12.0"
Module #11
Name: module-null-sink
Argument: sink_name=auto_null sink_properties='device.description="Dummy
Output"'
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "Clocked NULL sink"
module.version = "12.0"
Module #12
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on
intended roles of devices"
module.version = "12.0"
Module #13
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "12.0"
Module #14
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of
this user"
module.version = "12.0"
Module #15
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this
user"
module.version = "12.0"
Module #16
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "12.0"
Module #17
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while
others exist"
module.version = "12.0"
Module #18
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "12.0"
Module #19
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "12.0"
Module #20
Name: module-x11-publish
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "12.0"
Module #21
Name: module-x11-cork-request
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "12.0"
Sink #0
State: SUSPENDED
Name: auto_null
Description: Dummy Output
Driver: module-null-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 11
Mute: no
Volume: front-left: 64880 / 99% / -0.26 dB, front-right: 64880 /
99% / -0.26 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: auto_null.monitor
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Dummy Output"
device.class = "abstract"
device.icon_name = "audio-card"
Formats:
pcm
Source #0
State: SUSPENDED
Name: auto_null.monitor
Description: Monitor of Dummy Output
Driver: module-null-sink.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 11
Mute: no
Volume: front-left: 64880 / 99% / -0.26 dB, front-right: 64880 /
99% / -0.26 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: auto_null
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Dummy Output"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 15
Properties:
application.name = "Login Session 2"
systemd-login.session = "2"
Client #3
Driver: protocol-native.c
Owner Module: 6
Properties:
application.name = "Chrome input"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "2174"
application.process.user = "ted"
application.process.host = "debian"
application.process.binary = "Keybase"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"e839f6829a8f43ddf188e65500000016"
Client #13
Driver: protocol-native.c
Owner Module: 6
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "3849"
application.process.user = "ted"
application.process.host = "debian"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0.0"
application.process.machine_id =
"e839f6829a8f43ddf188e65500000016"
application.process.session_id = "2"
--===============5888231089374810657==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="bug-pulseaudio-pactl_info.C53Ns8"
Server String: unix:/run/user/1000/pulse/native
Library Protocol Version: 32
Server Protocol Version: 32
Is Local: yes
Client Index: 14
Tile Size: 65472
User Name: ted
Host Name: debian
Server Name: pulseaudio
Server Version: 12.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: auto_null
Default Source: auto_null.monitor
Cookie: 60a0:2136
--===============5888231089374810657==--
