Package: src:linux Version: 4.18~rc4-1~exp1 Severity: normal Please enable CONFIG_SPI_SPIDEV, at least for arm and arm64.
-- Package-specific info: ** Version: Linux version 4.18.0-rc4-arm64 (debian-ker...@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-24)) #1 SMP Debian 4.18~rc4-1~exp1 (2018-07-12) ** Command line: bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa020d3 bcm2709.serial=0x87e8561a bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=B8:27:EB:E8:56:1A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=LABEL=root rw elevator=deadline fsck.repair=yes net.ifnames=0 cma=512M rootwait ** Tainted: E (8192) * Unsigned module has been loaded. ** Model information Device Tree model: Raspberry Pi 3 Model B Plus Rev 1.3 ** Loaded modules: rfcomm(E) cpufreq_userspace(E) cpufreq_conservative(E) cpufreq_ondemand(E) cpufreq_powersave(E) 8021q(E) garp(E) mrp(E) stp(E) llc(E) iptable_nat(E) nf_nat_ipv4(E) nf_nat(E) iptable_mangle(E) iptable_filter(E) bnep(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) btsdio(E) bluetooth(E) microchip(E) vc4(E) snd_soc_core(E) drbg(E) ansi_cprng(E) lan78xx(E) snd_pcm_dmaengine(E) snd_pcm(E) ecdh_generic(E) of_mdio(E) snd_timer(E) brcmfmac(E) fixed_phy(E) libphy(E) brcmutil(E) sg(E) snd(E) cfg80211(E) soundcore(E) rfkill(E) cec(E) drm_kms_helper(E) drm(E) pwm_bcm2835(E) bcm2835_thermal(E) bcm2835_rng(E) rng_core(E) bcm2835_wdt(E) leds_gpio(E) nf_conntrack_ipv6(E) nf_defrag_ipv6(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nf_conntrack(E) nft_counter(E) nft_set_bitmap(E) nft_set_hash(E) nft_set_rbtree(E) nf_tables(E) nfnetlink(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) ecb(E) aes_arm64(E) sd_mod(E) uas(E) usb_storage(E) scsi_mod(E) btrfs(E) xor(E) zstd_decompress(E) zstd_compress(E) xxhash(E) raid6_pq(E) libcrc32c(E) crc32c_generic(E) dwc2(E) udc_core(E) sdhci_iproc(E) usbcore(E) sdhci_pltfm(E) usb_common(E) sdhci(E) i2c_bcm2835(E) bcm2835(E) phy_generic(E) ** PCI devices: ** USB devices: Bus 001 Device 004: ID 1a4a:1670 Silicon Image Bus 001 Device 006: ID 1058:10a8 Western Digital Technologies, Inc. Elements Portable (WDBUZG) Bus 001 Device 005: ID 0424:7800 Standard Microsystems Corp. Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (990, 'testing'), (1, 'experimental') Architecture: arm64 (aarch64) Kernel: Linux 4.18.0-rc4-arm64 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.18.0-rc4-arm64-unsigned depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod 25-1 ii linux-base 4.5 Versions of packages linux-image-4.18.0-rc4-arm64-unsigned recommends: ii apparmor 2.12-5 ii firmware-linux-free 3.4 ii irqbalance 1.3.0-0.1+b1 Versions of packages linux-image-4.18.0-rc4-arm64-unsigned suggests: pn debian-kernel-handbook <none> pn linux-doc-4.18 <none> Versions of packages linux-image-4.18.0-rc4-arm64-unsigned is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20170823-1 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
