$ export SANE_DEBUG_GENESYS=255
A document is inserted.
$ scanimage > /tmp/image.png
[sanei_debug] Setting debug level of genesys to 255.
[genesys] SANE Genesys backend version 1.0 build 2508 from sane-backends
1.0.25
[genesys] SANE Genesys backend built with libusb-1.0
[genesys] sane_init: authorize != null
[genesys] sane_init: little endian machine
[genesys] probe_genesys_devices start
[genesys] attach: start: devp != NULL, may_wait = 0
[genesys] attach: trying to open device `libusb:001:008'
[genesys] attach: device `libusb:001:008' successfully opened
[genesys] attach: found Xerox flatbed scanner Travelscanner 100 at
libusb:001:008
[genesys] attach completed
[genesys] probe_genesys_devices: 1 devices currently attached
[genesys] probe_genesys_devices completed
[genesys] sane_genesys_init completed
[genesys] sane_get_devices: start: local_only = false
[genesys] probe_genesys_devices start
[genesys] attach: start: devp != NULL, may_wait = 0
[genesys] attach: device `libusb:001:008' was already in device list
[genesys] probe_genesys_devices: 1 devices currently attached
[genesys] probe_genesys_devices completed
[genesys] check_present: libusb:001:008 detected.
[genesys] sane_genesys_get_devices completed
[genesys] sane_open: start (devicename = `libusb:001:008')
[genesys] sane_open: found `xerox-travelscanner' in devlist
[genesys] init_options start
[genesys] init_options completed
[genesys] sanei_genesys_init_fe start
[genesys] sanei_genesys_create_gamma_table: size = 256, maximum = 65535,
gamma_max = 65535, gamma = 1
[genesys] sanei_genesys_create_gamma_table: completed
[genesys] sanei_genesys_create_gamma_table: size = 256, maximum = 65535,
gamma_max = 65535, gamma = 1
[genesys] sanei_genesys_create_gamma_table: completed
[genesys] sanei_genesys_create_gamma_table: size = 256, maximum = 65535,
gamma_max = 65535, gamma = 1
[genesys] sanei_genesys_create_gamma_table: completed
[genesys] sanei_genesys_exposure_time2: ydpi=900, step=1, endpixel=44
led=4432, power=0 => exposure=9166
[genesys] calibration_filename: calibration filename
>/home/alison/.sane/xerox-travelscanner.cal<
[genesys] sane_genesys_open: Calibration filename set to:
[genesys] sane_genesys_open:
>/home/alison/.sane/xerox-travelscanner.cal<
[genesys] sanei_genesys_read_calibration start
[genesys] sanei_genesys_read_calibration: reading one record
[genesys] sanei_genesys_read_calibration completed
[genesys] sane_genesys_open completed
[genesys] sane_get_option_descriptor: option = (0)
[genesys] sane_control_option: start: action = get, option = (0)
[genesys] sane_control_option: exit
[genesys] sane_get_option_descriptor: option = (0)
[genesys] sane_control_option: start: action = get, option = (0)
[genesys] sane_control_option: exit
[genesys] sane_get_option_descriptor: option = (null) (1)
[genesys] sane_get_option_descriptor: option = mode (2)
[genesys] sane_get_option_descriptor: option = source (3)
[genesys] sane_get_option_descriptor: option = preview (4)
[genesys] sane_get_option_descriptor: option = depth (5)
[genesys] sane_get_option_descriptor: option = resolution (6)
[genesys] sane_get_option_descriptor: option = (null) (7)
[genesys] sane_get_option_descriptor: option = tl-x (8)
[genesys] sane_get_option_descriptor: option = tl-y (9)
[genesys] sane_get_option_descriptor: option = br-x (10)
[genesys] sane_get_option_descriptor: option = br-y (11)
[genesys] sane_get_option_descriptor: option = (null) (12)
[genesys] sane_get_option_descriptor: option = custom-gamma (13)
[genesys] sane_get_option_descriptor: option = gamma-table (14)
[genesys] sane_get_option_descriptor: option = red-gamma-table (15)
[genesys] sane_get_option_descriptor: option = green-gamma-table (16)
[genesys] sane_get_option_descriptor: option = blue-gamma-table (17)
[genesys] sane_get_option_descriptor: option = swdeskew (18)
[genesys] sane_get_option_descriptor: option = swcrop (19)
[genesys] sane_get_option_descriptor: option = swdespeck (20)
[genesys] sane_get_option_descriptor: option = despeck (21)
[genesys] sane_get_option_descriptor: option = swskip (22)
[genesys] sane_get_option_descriptor: option = swderotate (23)
[genesys] sane_get_option_descriptor: option = brightness (24)
[genesys] sane_get_option_descriptor: option = contrast (25)
[genesys] sane_get_option_descriptor: option = (null) (26)
[genesys] sane_get_option_descriptor: option = lamp-off-time (27)
[genesys] sane_get_option_descriptor: option = lamp-off-scan (28)
[genesys] sane_get_option_descriptor: option = threshold (29)
[genesys] sane_get_option_descriptor: option = threshold-curve (30)
[genesys] sane_get_option_descriptor: option = disable-dynamic-lineart
(31)
[genesys] sane_get_option_descriptor: option = disable-interpolation
(32)
[genesys] sane_get_option_descriptor: option = color-filter (33)
[genesys] sane_get_option_descriptor: option = calibration-file (34)
[genesys] sane_get_option_descriptor: option = expiration-time (35)
[genesys] sane_get_option_descriptor: option = (null) (36)
[genesys] sane_get_option_descriptor: option = scan (37)
[genesys] sane_get_option_descriptor: option = file (38)
[genesys] sane_get_option_descriptor: option = email (39)
[genesys] sane_get_option_descriptor: option = copy (40)
[genesys] sane_get_option_descriptor: option = page-loaded (41)
[genesys] sane_get_option_descriptor: option = ocr (42)
[genesys] sane_get_option_descriptor: option = power (43)
[genesys] sane_get_option_descriptor: option = extra (44)
[genesys] sane_get_option_descriptor: option = need-calibration (45)
[genesys] sane_get_option_descriptor: option = (null) (46)
[genesys] sane_get_option_descriptor: option = calibrate (47)
[genesys] sane_get_option_descriptor: option = clear-calibration (48)
[genesys] sane_control_option: start: action = get, option = br-x (10)
[genesys] sane_control_option: exit
[genesys] sane_control_option: start: action = get, option = tl-x (8)
[genesys] sane_control_option: exit
[genesys] sane_control_option: start: action = get, option = br-y (11)
[genesys] sane_control_option: exit
[genesys] sane_control_option: start: action = get, option = tl-y (9)
[genesys] sane_control_option: exit
[genesys] sane_control_option: start: action = get, option = tl-x (8)
[genesys] sane_control_option: exit
[genesys] sane_get_option_descriptor: option = br-x (10)
[genesys] sane_control_option: start: action = set, option = br-x (10)
[genesys] sane_control_option: exit
[genesys] sane_control_option: start: action = get, option = tl-y (9)
[genesys] sane_control_option: exit
[genesys] sane_get_option_descriptor: option = br-y (11)
[genesys] sane_control_option: start: action = set, option = br-y (11)
[genesys] sane_control_option: exit
[genesys] sane_genesys_start start
[genesys] genesys_start_scan start
[genesys] genesys_start_scan: failed to load document: Invalid argument
[genesys] sane_genesys_start: Invalid argument
scanimage: sane_start: Invalid argument
[genesys] sane_genesys_cancel start
[genesys] sane_cancel: failed to eject document: Invalid argument
[genesys] sane_genesys_close start
[genesys] write_calibration start
[genesys] write_calibration completed
[genesys] sane_genesys_close completed
[genesys] sane_genesys_exit start
[genesys] sane_genesys_exit completed
[alison@hildesheim ~]$ sudo dmesg | tail
[ 38.068609] wlp3s0: send auth to 60:fe:20:92:97:9a (try 1/3)
[ 38.082141] wlp3s0: authenticated
[ 38.084162] wlp3s0: associate with 60:fe:20:92:97:9a (try 1/3)
[ 38.091228] wlp3s0: RX AssocResp from 60:fe:20:92:97:9a (capab=0x411
status=0 aid=1)
[ 38.092390] wlp3s0: associated
[ 38.092452] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 150.453005] usb 1-1: USB disconnect, device number 8
[ 150.749974] usb 1-1: new high-speed USB device number 9 using
xhci_hcd
[ 155.985709] usb 1-1: device descriptor read/64, error -110
[ 171.600752] usb 1-1: device descriptor read/64, error -110
On 2018-07-16 11:35, Jörg Frings-Fürst wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
reopen 903871
severity 903871 normal
tags 903871 + moreinfo
thanks
Hello Alison,
please excuse my carelessness. I did not find the scanner in the list.
The bug is reopened.
Please can you run
export SANE_DEBUG_GENESYS=255
scanimage > /tmp/image.png
and attach the output into your answer.
Please also attach your
/etc/sane.d/genesys.conf
/etc/sane.d/net.conf
/etc/sane.d/saned.conf
Many thanks
CU
Jörg
- --
New:
GPG Fingerprint: 63E0 075F C8D4 3ABB 35AB 30EE 09F8 9F3C 8CA1 D25D
GPG key (long) : 09F89F3C8CA1D25D
GPG Key : 8CA1D25D
CAcert Key S/N : 0E:D4:56
Old pgp Key: BE581B6E (revoked since 2014-12-31).
Jörg Frings-Fürst
D-54470 Lieser
git: https://jff.email/cgit/
Threema: SYR8SJXB
Wire: @joergfringsfuerst
Skype: joergpenguin
Ring: jff
Telegram: @joergfringsfuerst
My wish list:
- Please send me a picture from the nature at your home.
-----BEGIN PGP SIGNATURE-----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=wYf3
-----END PGP SIGNATURE-----
---
Alison Chaiken ali...@she-devel.com
http://she-devel.com
The real trolley problem is that trolleys are underfunded. -- Alex Roy
# saned.conf
# Configuration for the saned daemon
## Daemon options
# Port range for the data connection. Choose a range inside [1024 - 65535].
# Avoid specifying too large a range, for performance reasons.
#
# ONLY use this if your saned server is sitting behind a firewall. If your
# firewall is a Linux machine, we strongly recommend using the
# Netfilter nf_conntrack_sane connection tracking module instead.
#
# data_portrange = 10000 - 10100
## Access list
# A list of host names, IP addresses or IP subnets (CIDR notation) that
# are permitted to use local SANE devices. IPv6 addresses must be enclosed
# in brackets, and should always be specified in their compressed form.
#
# The hostname matching is not case-sensitive.
#scan-client.somedomain.firm
#192.168.0.1
#192.168.0.1/29
#[2001:db8:185e::42:12]
#[2001:db8:185e::42:12]/64
# NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and
# /etc/services must also be properly configured to start
# the saned daemon as documented in saned(8), services(4)
# and inetd.conf(4) (or xinetd.conf(5)).
# This is the net backend config file.
## net backend options
# Timeout for the initial connection to saned. This will prevent the backend
# from blocking for several minutes trying to connect to an unresponsive
# saned host (network outage, host down, ...). Value in seconds.
# connect_timeout = 60
## saned hosts
# Each line names a host to attach to.
# If you list "localhost" then your backends can be accessed either
# directly or through the net backend. Going through the net backend
# may be necessary to access devices that need special privileges.
# localhost
# genesys.conf: Configuration file for Genesys Logic GL646 and GL841 based
scanners
#
# scanners that are not yet supported
# uncomment them only for development purpose
#
# UMAX Astra 4500 and Avision iVina 1600
#usb 0x0638 0x0a10
# Hewlett Packard ScanJet 2400c
usb 0x03f0 0x0a01
# Hewlett Packard ScanJet 3670c/3690c
usb 0x03f0 0x1405
# Plustek OpticPro ST24
#usb 0x07b3 0x0601
# Syscan DocketPort 465
#usb 0x0a82 0x4802
#
# supported scanners
#
# Medion MD5345/MD6228/MD6471
usb 0x0461 0x0377
# Hewlett Packard ScanJet 2300c
usb 0x03f0 0x0901
# Canon LiDE 35/40/50
usb 0x04a9 0x2213
# Canon LiDE 60
usb 0x04a9 0x221c
# Canon LiDE 80
usb 0x04a9 0x2214
# Canon 4400F
usb 0x04a9 0x2228
# Canon LiDE 100
usb 0x04a9 0x1904
# Canon LiDE 110
usb 0x04a9 0x1909
# Canon LiDE 200
usb 0x04a9 0x1905
# Canon 5600F
usb 0x04a9 0x1906
# Canon LiDE 700F
usb 0x04a9 0x1907
# Canon LiDE 210
usb 0x04a9 0x190a
# Canon LiDE 120
usb 0x04a9 0x190e
# Canon LiDE 220
usb 0x04a9 0x190f
# Canon 5600f
usb 0x04a9 0x1906
# Visioneer Strobe XP200
usb 0x04a7 0x0426
# Visioneer Strobe XP300
usb 0x04a7 0x0474
# Ambir/Syscan DocketPort 665
usb 0x0a82 0x4803
# Visioneer Roadwarrior
usb 0x04a7 0x0494
# Visioneer XP100 rev 3
usb 0x04a7 0x049b
#Pentax DSmobile 600
usb 0x0a17 0x3210
usb 0x04f9 0x2038
# Syscan DocketPort 467
usb 0x1dcc 0x4812
# Syscan DocketPort 485
usb 0x0a82 0x4800
# DCT DocketPort 487
usb 0x1dcc 0x4810
# Syscan/Ambir DocketPort 685
usb 0x0a82 0x480c
# Visioneer OneTouch 7100
usb 0x04a7 0x0229
# Xerox Travel Scanner 100
usb 0x04a7 0x04ac
# Panasonic KV-SS080
usb 0x04da 0x100f
# Hewlett Packard ScanJet 4850C
usb 0x03f0 0x1b05
# Hewlett Packard ScanJet G4010
usb 0x03f0 0x4505
# Hewlett Packard ScanJet G4050
usb 0x03f0 0x4605
# Plustek OpticBook 3600
usb 0x07b3 0x0900
# Primax Electronics, Ltd Xerox 2400 Onetouch
usb 0x0461 0x038b
#Hewlett Packard ScanJet N6310
usb 0x03f0 0x4705
# Canon Image Formula 101
usb 0x1803 0x162e
# Plustek OpticBook 3800
usb 0x07b3 0x1300
