Package: src:linux
Version: 4.13.13-1
Severity: normal
When I try to install kernel-image 4.13.0-1 amd64 I get the following errors:
DKMS make.log for 8192cu-1.10 for kernel 4.13.0-1-amd64 (x86_64)
Fri Dec 22 20:47:07 CST 2017
make: Entering directory '/usr/src/linux-headers-4.13.0-1-amd64'
AR /var/lib/dkms/8192cu/1.10/build/built-in.o
CC [M] /var/lib/dkms/8192cu/1.10/build/core/rtw_cmd.o
CC [M] /var/lib/dkms/8192cu/1.10/build/core/rtw_security.o
In file included from /var/lib/dkms/8192cu/1.10/build/core/rtw_cmd.c:23:0:
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h: In function
‘thread_enter’:
In file included from /var/lib/dkms/8192cu/1.10/build/core/rtw_security.c:23:0:
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h: In function
‘thread_enter’:
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h:1482:2: error: implicit
declaration of function ‘allow_signal’ [-Werror=implicit-function-declaration]
allow_signal(SIGTERM);
^~~~~~~~~~~~
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h:1482:2: error: implicit
declaration of function ‘allow_signal’ [-Werror=implicit-function-declaration]
allow_signal(SIGTERM);
^~~~~~~~~~~~
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h: In function
‘flush_signals_thread’:
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h: In function
‘flush_signals_thread’:
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h:1495:6: error: implicit
declaration of function ‘signal_pending’ [-Werror=implicit-function-
declaration]
if (signal_pending (current))
^~~~~~~~~~~~~~
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h:1495:6: error: implicit
declaration of function ‘signal_pending’ [-Werror=implicit-function-
declaration]
if (signal_pending (current))
^~~~~~~~~~~~~~
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h:1497:3: error: implicit
declaration of function ‘flush_signals’ [-Werror=implicit-function-declaration]
flush_signals(current);
^~~~~~~~~~~~~
/var/lib/dkms/8192cu/1.10/build/include/osdep_service.h:1497:3: error: implicit
declaration of function ‘flush_signals’ [-Werror=implicit-function-declaration]
flush_signals(current);
^~~~~~~~~~~~~
/var/lib/dkms/8192cu/1.10/build/core/rtw_security.c: In function ‘aes_cipher’:
/var/lib/dkms/8192cu/1.10/build/core/rtw_security.c:1504:5: warning: this ‘for’
clause does not guard... [-Wmisleading-indentation]
for (j = 0; j < 8; j++)
^~~
/var/lib/dkms/8192cu/1.10/build/core/rtw_security.c:1507:2: note: ...this
statement, but the latter is misleadingly indented as if it is guarded by the
‘for’
payload_index = hdrlen + 8;
^~~~~~~~~~~~~
/var/lib/dkms/8192cu/1.10/build/core/rtw_security.c: In function
‘aes_decipher’:
/var/lib/dkms/8192cu/1.10/build/core/rtw_security.c:1878:5: warning: this ‘for’
clause does not guard... [-Wmisleading-indentation]
for (j = 0; j < 8; j++)
^~~
/var/lib/dkms/8192cu/1.10/build/core/rtw_security.c:1881:2: note: ...this
statement, but the latter is misleadingly indented as if it is guarded by the
‘for’
payload_index = hdrlen + 8;
^~~~~~~~~~~~~
cc1: some warnings being treated as errors
/usr/src/linux-headers-4.13.0-1-common/scripts/Makefile.build:307: recipe for
target '/var/lib/dkms/8192cu/1.10/build/core/rtw_cmd.o' failed
make[3]: *** [/var/lib/dkms/8192cu/1.10/build/core/rtw_cmd.o] Error 1
make[3]: *** Waiting for unfinished jobs....
cc1: some warnings being treated as errors
/usr/src/linux-headers-4.13.0-1-common/scripts/Makefile.build:307: recipe for
target '/var/lib/dkms/8192cu/1.10/build/core/rtw_security.o' failed
make[3]: *** [/var/lib/dkms/8192cu/1.10/build/core/rtw_security.o] Error 1
/usr/src/linux-headers-4.13.0-1-common/Makefile:1529: recipe for target
'_module_/var/lib/dkms/8192cu/1.10/build' failed
make[2]: *** [_module_/var/lib/dkms/8192cu/1.10/build] Error 2
Makefile:145: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:8: recipe for target 'all' failed
make: *** [all] Error 2
make: Leaving directory '/usr/src/linux-headers-4.13.0-1-amd64'
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq dc7700p Small Form Factor
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 786E1 v03.07
board_vendor: Hewlett-Packard
board_name: 0A54h
board_version:
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub
[8086:2990] (rev 02)
Subsystem: Hewlett-Packard Company 82Q963/Q965 Memory Controller Hub
[103c:2801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q963/Q965
Integrated Graphics Controller [8086:2992] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company 82Q963/Q965 Integrated Graphics
Controller [103c:2801]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f0400000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1210 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Communication controller [0780]: Intel Corporation 82Q963/Q965 HECI
Controller [8086:2994] (rev 02)
Subsystem: Hewlett-Packard Company 82Q963/Q965 HECI Controller
[103c:2801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f0526900 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:03.2 IDE interface [0101]: Intel Corporation 82Q963/Q965 PT IDER Controller
[8086:2996] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company 82Q963/Q965 PT IDER Controller
[103c:2801]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 1218 [size=8]
Region 1: I/O ports at 1240 [size=4]
Region 2: I/O ports at 1220 [size=8]
Region 3: I/O ports at 1244 [size=4]
Region 4: I/O ports at 11e0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic
Kernel modules: ata_generic
00:03.3 Serial controller [0700]: Intel Corporation 82Q963/Q965 KT Controller
[8086:2997] (rev 02) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company 82Q963/Q965 KT Controller [103c:2801]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1228 [size=8]
Region 1: Memory at f0524000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM Gigabit Network
Connection [8086:104a] (rev 02)
Subsystem: Hewlett-Packard Company 82566DM Gigabit Network Connection
[103c:2800]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: Memory at f0500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f0525000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1100 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801H (ICH8 Family) USB UHCI
Controller [103c:2801]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1120 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801H (ICH8 Family) USB UHCI
Controller [103c:2801]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1140 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 82801H (ICH8 Family) USB2 EHCI
Controller [103c:2801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at f0526000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 02)
Subsystem: Hewlett-Packard Company 82801H (ICH8 Family) HD Audio
Controller [103c:2801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f0520000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 24
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-f81fffff
Prefetchable memory behind bridge: 00000000f8200000-00000000f83fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801H (ICH8 Family) USB UHCI
Controller [103c:2801]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1160 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801H (ICH8 Family) USB UHCI
Controller [103c:2801]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1180 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 82801H (ICH8 Family) USB2 EHCI
Controller [103c:2801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f0526400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HO (ICH8DO) LPC Interface
Controller [8086:2814] (rev 02)
Subsystem: Hewlett-Packard Company 82801HO (ICH8DO) LPC Interface
Controller [103c:2801]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port
SATA Controller [IDE mode] [8086:2820] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company 82801H (ICH8 Family) 4 port SATA
Controller [IDE mode] [103c:2801]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 11f0 [size=16]
Region 5: I/O ports at 1200 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
** USB devices:
Bus 006 Device 002: ID 050d:945a Belkin Components F7D1101 v1 Basic Wireless
Adapter [Realtek RTL8188SU]
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 04b3:310b IBM Corp. Red Wheel Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.4.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.13.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 24-1
ii linux-base 4.5
Versions of packages linux-image-4.13.0-1-amd64 recommends:
ii apparmor 2.11.1-4
ii firmware-linux-free 3.4
ii irqbalance 1.2.0-0.2
Versions of packages linux-image-4.13.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg1-2
ii grub-pc 2.02-2
pn linux-doc-4.13 <none>
Versions of packages linux-image-4.13.0-1-amd64 is related to:
ii firmware-amd-graphics 20170823-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20170823-1
ii firmware-misc-nonfree 20170823-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20170823-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
