Package: vdr Version: 2.3.8-1 Severity: normal --- Please enter the report below this line. --- Dear maintainer,
after I upgraded to vdr version 2.3.8-1 my system wasn't able to start it up, again. systemctl says: # systemctl status vdr.service ● vdr.service - Video Disk Recorder Loaded: loaded (/lib/systemd/system/vdr.service; enabled; vendor preset: enabled) Active: failed (Result: protocol) since Wed 2017-09-27 23:26:31 CEST; 19s ago Process: 9509 ExecStart=/usr/bin/vdr (code=exited, status=1/FAILURE) Process: 9499 ExecStartPre=/bin/sh /usr/lib/vdr/merge-commands.sh reccmds (code=exited, status=0/SUCCESS) Process: 9489 ExecStartPre=/bin/sh /usr/lib/vdr/merge-commands.sh commands (code=exited, status=0/SUCCESS) Main PID: 9509 (code=exited, status=1/FAILURE) Sep 27 23:26:31 dog systemd[1]: Failed to start Video Disk Recorder. Sep 27 23:26:31 dog systemd[1]: vdr.service: Unit entered failed state. Sep 27 23:26:31 dog systemd[1]: vdr.service: Failed with result 'protocol'. Sep 27 23:26:31 dog systemd[1]: vdr.service: Service hold-off time over, scheduling restart. Sep 27 23:26:31 dog systemd[1]: Stopped Video Disk Recorder. Sep 27 23:26:31 dog systemd[1]: vdr.service: Start request repeated too quickly. Sep 27 23:26:31 dog systemd[1]: Failed to start Video Disk Recorder. Sep 27 23:26:31 dog systemd[1]: vdr.service: Unit entered failed state. Sep 27 23:26:31 dog systemd[1]: vdr.service: Failed with result 'protocol'. # systemctl restart vdr.service Job for vdr.service failed because the service did not take the steps required by its unit configuration. journalctl prints out (shortened for saving space): Sep 27 23:28:02 dog systemd[1]: Starting Video Disk Recorder... -- Subject: Unit vdr.service has begun start-up -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- Unit vdr.service has begun starting up. Sep 27 23:28:02 dog vdr[9683]: [9683] VDR version 2.3.8 started Sep 27 23:28:02 dog vdr[9683]: [9683] switched to user 'vdr' Sep 27 23:28:02 dog vdr[9683]: [9683] codeset is 'UTF-8' - known Sep 27 23:28:02 dog vdr[9683]: [9683] found 28 locales in /usr/share/locale Sep 27 23:28:02 dog vdr[9683]: [9683] loading plugin: /usr/lib/vdr/plugins/libvdr-conflictcheckonly.so.2.3.8 […] Sep 27 23:28:02 dog vdr[9683]: [9683] loading plugin: /usr/lib/vdr/plugins/libvdr-live.so.2.3.8 Sep 27 23:28:02 dog vdr[9683]: [9683] [live] INFO: validating server ip '0.0.0.0' Sep 27 23:28:02 dog vdr[9683]: INFO: validating live server ip '0.0.0.0' Sep 27 23:28:02 dog vdr[9683]: [9683] loading plugin: /usr/lib/vdr/plugins/libvdr-osddemo.so.2.3.8 […] Sep 27 23:28:02 dog vdr[9683]: [9683] probing /dev/dvb/adapter0/frontend0 Sep 27 23:28:02 dog vdr[9683]: [9683] creating cDvbDevice Sep 27 23:28:02 dog vdr[9683]: [9683] new device number 1 Sep 27 23:28:02 dog vdr[9683]: [9684] video directory scanner thread started (pid=9683, tid=9684, prio=low) Sep 27 23:28:02 dog vdr[9683]: [9684] video directory scanner thread ended (pid=9683, tid=9684) Sep 27 23:28:02 dog vdr[9683]: [9683] DVB API version is 0x050A (VDR was built with 0x050A) Sep 27 23:28:02 dog vdr[9683]: [9683] frontend 0/0 provides DVB-T,DVB- T2,DVB-C with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("Silicon Labs Si2168") Sep 27 23:28:02 dog vdr[9683]: [9683] cTimeMs: using monotonic clock (resolution is 1 ns) Sep 27 23:28:02 dog vdr[9683]: Error opening terminal: unknown. Sep 27 23:28:02 dog vdr[9683]: [9683] found 1 DVB device Sep 27 23:28:02 dog vdr[9683]: [9688] device 1 section handler thread started (pid=9683, tid=9688, prio=low) Sep 27 23:28:02 dog vdr[9683]: [9687] frontend 0/0 tuner thread started (pid=9683, tid=9687, prio=high) […] Sep 27 23:28:02 dog systemd[1]: vdr.service: Main process exited, code=exited, status=1/FAILURE Sep 27 23:28:02 dog systemd[1]: Failed to start Video Disk Recorder. -- Subject: Unit vdr.service has failed -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- Unit vdr.service has failed. -- -- The result is failed. Sep 27 23:28:02 dog systemd[1]: vdr.service: Unit entered failed state. Sep 27 23:28:02 dog systemd[1]: vdr.service: Failed with result 'exit- code'. Sep 27 23:28:02 dog systemd[1]: vdr.service: Service hold-off time over, scheduling restart. Sep 27 23:28:02 dog systemd[1]: Stopped Video Disk Recorder. -- Subject: Unit vdr.service has finished shutting down -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- Unit vdr.service has finished shutting down. Sep 27 23:28:02 dog systemd[1]: vdr.service: Start request repeated too quickly. Sep 27 23:28:02 dog systemd[1]: Failed to start Video Disk Recorder. -- Subject: Unit vdr.service has failed -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- Unit vdr.service has failed. -- -- The result is failed. Sep 27 23:28:02 dog systemd[1]: vdr.service: Unit entered failed state. Sep 27 23:28:02 dog systemd[1]: vdr.service: Failed with result 'exit- code'. I'm using the debian package without any patches and the original configuration. Just changed the channels.conf, because the original one doesn't hold any DVB-T2 HD data and doesn't have any data that works for my area (Stuttgart/Germany). The adaptor does work with VLC, by the way. AND: I've used it, already, with mythtv and kodi. --- System information. --- Architecture: Kernel: Linux 4.12.0-2-amd64 Debian Release: buster/sid 500 testing ftp-stud.hs-esslingen.de --- Package information. --- Depends (Version) | Installed ===================================-+-============ libc6 (>= 2.16) | libcap2 (>= 1:2.10) | libfontconfig1 (>= 2.12) | libfreetype6 (>= 2.2.1) | libgcc1 (>= 1:3.0) | libjpeg62-turbo (>= 1.3.1) | libstdc++6 (>= 5) | libsystemd0 | debconf (>= 0.5) | OR debconf-2.0 | init-system-helpers (>= 1.18~) | adduser | lsb-base (>= 3.0-6) | Recommends (Version) | Installed =================================-+-=========== lirc | 0.10.0-2 ttf-bitstream-vera | 1.10-8 OR fonts-freefont-ttf | 20120503-6 Suggests (Version) | Installed =====================================-+-=========== vdr-plugin-dvbsddevice |
