Am Dienstag, 15. Februar 2005 23.18 schrieb Henrique de Moraes Holschuh: > On Tue, 15 Feb 2005, Niklaus Giger wrote: > > After reading hplip/README.Debian and following the advice "Detecting the > > printer" I proudly attach you the answer. > > Heh, congratulations :) > > > Choose device from CUPS installed devices:[0m > > Using device: hp:/usb/HP_LaserJet_3200M?device=/dev/usb/lp0 > > Did hplip detect it just fine? If it did, chances are sane will > automagically work now *as long as you use the hpaio sane backend*, so > there is no need for a hotplug USB map. Or is there? If so, we will have > to add the list by hand, as the HPLIP-distributed model database does NOT > have USB ids in there anywhere... Yes. hplip_info gave the answer without specifying any additional parameter. Today I commented out my entry in /etc/hotplug/usb/libsane.usermap, restarted hotplug (which did not mention libusbscanner as with my entry). Then I entered: $ scanimage -L which gave me the following answer: device `hpaio:/usb/HP_LaserJet_3200M?device=/dev/usb/lp0' is a hp HP_LaserJet_3200M multi-function peripheral
scanimage did work also. >> In which case, I am inclined to forward this upstream for HP to deal with > :P > > > scan-type: 2 > > I.e. scanning should work through hpaio. I have however now the problem that printing is not working correctly. I submit one page using cups, the job starts and prints okay. But it always stays in the queue and I cannot print a second job. The cups errorlog says: I [16/Feb/2005:21:28:15 +0100] Job 186 queued on 'HP' by 'niklaus'. I [16/Feb/2005:21:28:16 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=2936) I [16/Feb/2005:21:29:42 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=2941) Any clues? Uninstalling hplip, adding the entry to libsane.usermap and changing printers.conf back to the old value, fixed my printing problem, but now I am unable to use the scanner. But as my PegasosPPC also has a parallel port, I might try it to make printing and scanning possible. Best regards -- Niklaus Giger Wieshoschet 6 CH-8753 Mollis Tel. ++41 55 612 20 54 (privat) Tel. ++41 55 618 64 68 (Geschäft)
